70-410 Exam Dumps With Real Exam Questions - Killexams

Microsoft 70-410 Installing and Configuring Windows Server 2012 http://killexams.com/exam-detail/70-410

QUESTION: 159 A company’s server virtualization team needs to provision a series of Hyper-V workloads to use existing network storage arrays. The team has chosen to use Fibre Channel ports within the guest operating systems. Which of the following Windows Server versions can be used as guest operating systems when using Hyper-V Fibre Channel ports? A. 2003 R2 B. 2008 C. 2003 D. 2012 Answer: B, D Explanation: Windows Server 2008, 2008 R2, and 2012 R2 can be guest operating systems when using Hyper-V Fibre Channel host bus adaptors (HBAs). Updated HBA drivers are needed along with NPIV-enabled (N Port ID Virtualization) SANs. Quick Tip: Virtual Fibre Channel logical units cannot be used as boot media. QUESTION: 160 Your network contains an Active Directory domain named contoso.com. The domain contains two servers named CONT1 and CONT2. Both servers run Windows Server 2012 R2. CONT1 has a shared printer named Printer1. CONT2 connects to Printer1 on CONT1. When you attempt to remove Printer1 from CONT2, you receive the error message shown in the exhibit. (Click the Exhibit button.) You successfully delete the other printers installed on CONT2. You need to identify what prevents you from deleting Printer1 on CONT2. What should you identify? 112

A. Printer1 is deployed as part of a mandatory profile. B. Printer1 is deployed by using a Group Policy object (GPO). C. Your user account is not a member of the Print Operators group on CONT2. D. Your user account is not a member of the Print Operators group on CONT1. Answer: B QUESTION: 161 Your network contains an Active Directory forest. The forest contains two domains named contoso.com and corp.contoso.com. All domain controllers run Windows Server 2012 R2 and are configured as global catalog servers. The corp.contoso.com domain contains a domain controller named DC1. You need to disable the global catalog on DC1. What should you do? A. From Active Directory Users and Computers, modify the properties of the DC1 computer account. B. From Active Directory Administrative Center, modify the properties of the DC1 computer account. C. From Active Directory Sites and Services, modify the NTDS Settings of the DC1 server object. D. From Active Directory Domains and Trusts, modify the properties of the corp.contoso.com domain. Answer: C Explanation: To add or remove the global catalog Open Active Directory Sites and Services. To open Active Directory Sites and Services, click Start, click Administrative Tools, and then click Active Directory Sites and Services. To open Active Directory Sites and Services in Windows Server 2012, click Start, type dssite.msc. In the console tree, click the server object to which you want to add the global catalog or from which you want to remove the global catalog. Where? Active Directory Sites and Services\Sites\SiteName\Servers In the details pane, right-click NTDS Settings of the selected server object, and then click Properties. Select the Global Catalog check box to add the global catalog, or clear the check box to remove the global catalog. QUESTION: 162 Your network contains an Active Directory domain named adatum.com. The domain contains several thousand member servers that run Windows Server 2012 R2. All of the computer accounts for the member servers are in an organizational unit (OU) named Servers Accounts. Servers are restarted only occasionally. You need to identify which servers were restarted during the last two days. What should you do? 113

A. Run dsquery computer and specify the -stalepwd parameter B. Run dsquery server and specify the -o parameter. C. Run Get-ADComputer and specify the lastlogon property. D. Run Get-ADComputer and specify the SearchScope parameter Answer: C QUESTION: 163 You have a server named Server1 that runs Windows Server 2012 R2. You plan to create an image of Server1. You need to remove the source files for all server roles that are not installed on Server1. Which tool should you use? A. servermanagercmd.exe B. imagex.exe C. ocsetup.exe D. dism.exe Answer: D Explanation: servermanagercmd.exe – The ServerManagerCmd.exe command-line tool has been deprecated in Windows Server 2008 R2. imagex.exe – ImageX is a command-line tool in Windows Vista that you can use to create and manage Windows image (.wim) files. A .wim file contains one or more volume images, disk volumes that contain images of an installed Windows operating system. dism.exe – Deployment Image Servicing and Management (DISM.exe) is a command-line tool that can be used to service a Windows image or to prepare a Windows Preinstallation Environment (Windows PE) image. It replaces Package Manager (Pkgmgr.exe), PEimg, and Intlcfg that were included in Windows Vista. The functionality that was included in these tools is now consolidated in one tool(DISM.exe), and new functionality has been added to improve the experience for offline servicing. DISM can Add, remove, and enumerate packages. ocsetup.exe – The Ocsetup.exe tool is used as a wrapper for Package Manager (Pkgmgr.exe) and for Windows Installer (Msiexec.exe). Ocsetup.exe is a commandline utility that can be used to perform scripted installs and scripted uninstalls of Windows optional components. The Ocsetup.exe tool replaces the Sysocmgr.exe tool that Windows XP and Windows Server 2003i use. The Dism utility can be used to create and mount an image of Server1. References: 7(v ws.10).aspx 2(v ws.10).aspx Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p. 44 Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring Servers, p. 19-22 114

QUESTION: 164 Your network contains an Active Directory domain named adatum.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. On a server named Core1, you perform a Server Core Installation of Windows Server 2012 R2.You join Core1 to the adatum.com domain. You need to ensure that you can use Event Viewer on Server1 to view the event logs on Core1. What should you do on Core1? A. Run the Enable-NetFirewallRule cmdlet. B. Run the Disable-NetFirewallRule cmdlet. C. Install Windows Management Framework. D. Install Remote Server Administration Tools (RSAT). Answer: A Explanation: Event Viewer is a DCOM service which you can enable by either using sconfig to configure remote management or, if you only wish to change the firewall rule for DCOM, enabling the DCOM inbound firewall rule via PowerShell or Windows Firewall with Advanced Security. QUESTION: 165 You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed, and all workstations have Windows 8 installed. You are running a training exercise for junior administrators. You are currently discussing a Windows PowerShell cmdlet that activates previously de activated firewall rules. Which of the following is the cmdlet being discussed? A. Set-NetFirewallRule B. Enable-NetFirewallRule C. Set-NetIPsecRule D. Enable-NetIPsecRule Answer: B Explanation: Enable-NetFirewallRule – Enables a previously disabled firewall rule. QUESTION: 166 Your network contains an Active Directory domain named adatum.com. The domain contains the servers shown in the following table. 115

You need to ensure that you can use Server Manager on DC1 to manage DC2. Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.) A. Install Microsoft .NET Framework 4 on DC2. B. Install Remote Server Administration Tools on DC1. C. Install Remote Server Administration Tools on DC2. D. Install Windows Management Framework 3.0 on DC2. Answer: A, D Explanation: Windows Management Framework 3.0. To use this release of Server Manager to access and manage remote servers that are running Windows Server 2008 or Windows Server 2008 R2, you must first install .NET Framework 4.0, and then install Windows Management Framework 3.0 on those servers. Note: In Windows Server 2012 R2, you can use Server Manager to perform management tasks on remote servers. Remote management is enabled by default on servers that are running Windows Server 2012 R2. To manage a server remotely by using Server Manager, you add the server to the Server Manager server pool. You can use Server Manager to manage remote servers that are running Windows Server 2008 and Windows Server 2008 R2, but the following updates are required to fully manage these older operating systems (see above). Reference: Configure Remote Management in Server Manager. 116

For More exams visit https://killexams.com/vendors-exam-list Kill your exam at First Attempt.Guaranteed!

70-410 Dumps, 70-410 Braindumps, 70-410 Real Exam Questions, 70-410 Practice Test Created Date: 5/21/2019 12:41:58 AM .