Hydraulic Cylinders - Pneu-hyd.co.th
Hydraulic cylinders RE 17017/08.08 Replaces: 05.03 1/72 Series CD210 / CG210 Component series 1X Nominal pressure 210 bar (21 MPa) K4639-5 Table of contents Content Page Content Page Features, technical data 2 Piston Ø 125 38 to 43 General notes, engineering software ICS 2 Piston Ø 150 44 to 49 Forces, areas 3 Piston Ø 180 50 to 55 Mounting types 4 Piston Ø 200 56 to 61 Ordering code 5 Weight Position of line ports 6 Permissible stroke lengths Explanations 7 Calculation of buckling, stop tube extension 66 installation lengths and position tolerances 67 Inductive proximity switch 68 Proximity switch, technical data 69 Seals, end position cushioning 70 Calculation of braking force 71 Spare parts drawing 72 Cylinder data Piston Ø 40 8 to 13 Piston Ø 50 14 to 19 Piston Ø 63 20 to 25 Piston Ø 80 26 to 31 Piston Ø 100 32 to 37 62 63 to 65 Engineering software Interactive Catalog System Information on available spare parts: www.boschrexroth.com/spc Online www.boschrexroth.com/ics Brochure download www.boschrexroth.com/ business units/bri/de/downloads/ihc
2/72 Bosch Rexroth AG CD 210 / CG 210 Hydraulics RE 17017/08.08 Features – Service-friendly modular construction kit system, mounting of head and cap according to the tie rod principle – Operating pressure up to max. 210 bar – 16 mounting types Note! For the selection of the cylinder variant, please observe the Explanations on page 6! – Piston Ø: 40 to 200 mm – Piston rod Ø: 16 to 140 mm Technical data (for applications outside these parameters, please consult us!) Nominal pressure: 210 bar [21 MPa] Static test pressure: Permissible operating pressure x 1.3 (depending on piston Ø and type of mounting) Maximum operating pressure: 210 bar [21 MPa] (depending on piston Ø and type of mounting) The given operating pressures are valid for applications with jerk-free operation. In the case of extreme loads, e.g. rapid cycle sequence, mounting elements and threaded piston rod connections must be rated for durability. Installation position: Optional Hydraulic fluid: Mineral oils DIN 51524 (HL, HLP) Phosphate ester (HFD-R) Hydraulic fluid temperature range: –20 C to 80 C Ambient temperature range: –20 C to 80 C Optimum viscosity range: 20 to 100 mm2/s Min. viscosity: 12 mm2/s Max. viscosity: 380 mm2/s Cleanliness class to ISO Permissible maximum degree of contamination of the hydraulic fluid to ISO 4406 (c) Class 20/18/15. The cleanliness classes specified for components must be adhered to in hydraulic systems. Effective filtration prevents malfunction and, at the same time, prolongs the service life of components. For the selection of filters, see data sheets RE 50070, RE 50076, RE 50081, RE 50086, RE 50087, RE 50088. Stroke velocity: Up to 0.5 m/s (depending on line connection) Bleed points standard Tolerances: For stroke tolerances, permissible installation lengths and position tolerances, see page 67. Primer coating: As a standard, hydraulic cylinders are primered with one coating (color: gentian blue, RAL 5010) in a thickness of max. 80 μm. The following surfaces on cylinders and attached parts are not primered or paint-coated: – All diameters of fit to the customer side – Sealing faces for the line connection – Sealing faces for flanged connections – Inductive proximity switches Surfaces that are not paint-coated are protected by an anticorrosion agent (MULTICOR LF 80). Acceptance: Each cylinder is tested according to Bosch Rexroth standard. General notes Safety notes: For the installation, commissioning and maintenance of hydraulic cylinders, observe operating instructions RE 07100-B! Servicing and repair work must be carried out by Bosch Rexroth AG or personnel having undergone special training in this field. No warranty is granted for damage resulting from installation, maintenance or repair work not carried out by Bosch Rexroth AG. Checklists for hydraulic cylinders: Cylinders, the operating data of which differ from the specified values, can only be offered as special variants on request. For the preparation of offers, the deviations of technical data and/or operating data must be described in the checklists for hydraulic cylinders (RE 07200). Engineering software ICS (Interactive Catalog System) The ICS (Interactive Catalog System) is a selection and engineering aid for hydraulic cylinders. With the help of the ICS, designers of plant and machinery can quickly and reliably find the optimum hydraulic cylinder solution through logic-guided type code queries. This software helps to solve design and engineering tasks more quickly and efficiently. After having been guided through the product selection, the user quickly and reliably gets the exact technical data of the selected components as well as 2D and 3D CAD data in the correct file format for all common CAD systems. This allows users to reduce costs while increasing their competitiveness.
RE 17017/08.08 CD 210 / CG 210 Hydraulics Bosch Rexroth AG 3/72 Forces and areas Piston Ø Operating pressure in bar Piston rod Ø 75 100 150 210 mm mm Force; piston side kN Force; piston rod side kN Force; piston side kN Force; piston rod side kN Force; piston side kN Force; piston rod side kN Force; piston side kN Force; piston rod side kN 40 16 50 18 25 22 9.43 7.91 7.51 5.37 11.88 10.03 7.66 15.84 28 11.04 14.71 15.04 11.48 23.76 22.08 7.10 19.69 18.76 21.05 16.05 33.27 30.91 45 15.74 11.44 31.18 9.47 26.26 25.03 20.99 15.26 46.76 14.20 39.40 37.53 41.24 12.56 36 23.38 29.45 26.39 22.17 25 19.64 18.85 15.84 36 14.73 12.56 10.56 25 63 31.49 22.90 65.46 19.88 55.15 52.55 19.63 44.08 32.06 31.16 Piston area cm2 Annulus area cm2 10.55 10.02 7.65 15.83 14.71 9.46 26.25 25.01 20.98 15.26 ϕ 1.2:1 1.25:1 1.6:1 1.25:1 1.35:1 2:1 1.2:1 1.25:1 1.4:1 2:1 6.41 14.33 8.29 23.10 23.10 Area ratio Cushioning area Piston side cm2 Piston rod side cm2 Piston Ø Operating pressure in bar Piston rod Ø 75 100 150 210 mm mm Force; piston side kN Force; piston rod side kN Force; piston side kN Force; piston rod side kN Force; piston side kN Force; piston rod side kN Force; piston side kN Force; piston rod side kN Piston area cm2 Annulus area cm2 Area ratio Cushioning area 75 100 150 210 80 36 45 56 25.77 19.22 34.36 25.63 51.54 38.45 72.15 58.91 88.37 62.60 58.88 1.25:1 1.35:1 70 30.05 77.31 73.57 63 90 68.66 44.33 122.72 40.06 103.08 98.10 91.55 59.11 184.08 60.10 154.63 147.13 137.32 88.66 257.71 122.66 40.04 103.03 98.04 20.10 57.30 54.70 1.2:1 1.25:1 1.35:1 31.97 92.50 92.50 80 100 80 59.08 2:1 92.50 180 90 47.20 47.20 200 125 100 140 kN Force; piston rod side kN 109.16 103.68 94.84 Force; piston side kN Force; piston rod side kN 145.55 138.24 126.45 98.18 204.21 190.85 131.75 250.56 235.63 160.23 Force; piston side kN Force; piston rod side kN 218.33 207.38 189.68 147.28 306.32 286.28 197.63 375.85 353.45 240.34 Force; piston side kN 235.62 73.63 153.16 143.14 98.81 187.92 176.72 120.17 176.72 254.47 265.08 314.16 381.70 371.10 471.24 534.39 659.74 kN 305.65 290.32 265.55 206.20 428.85 400.80 276.70 526.18 494.83 336.50 cm2 Annulus area cm2 Area ratio 190.85 90 Force; piston side Force; piston rod side 132.54 91.50 2:1 58.90 30.60 150 63 56 92.04 78.50 30.63 mm 44.18 13.10 53.83 131.53 123.71 84.13 216.48 206.00 192.25 124.13 50.24 36.40 50 164.94 2:1 mm 93.95 210.56 84.20 70 117.81 25.62 cm2 62.63 75.40 60.14 50 19.80 125 78.54 1.4:1 Piston side 46.97 50.27 40.10 22.10 58.91 34.34 Piston rod side 45 37.70 30.07 13.47 100 40.07 Piston area Cushioning area 13.91 8.76 ϕ 1.25:1 cm2 Piston Ø Operating pressure in bar Piston rod Ø 6.84 8.76 ϕ 176.63 254.34 314.00 145.47 138.17 126.38 98.13 204.10 190.75 131.68 250.42 235.50 160.14 1.2:1 1.25:1 1.4:1 126.50 Piston side cm2 Piston rod side cm2 130.10 130.10 81.70 1.8:1 1.25:1 1.35:1 193.6 2:1 1.25:1 1.35:1 2:1 235.60 81.70 179.00 179.00 109.20 238.70 219.00 137.50
4/72 Bosch Rexroth AG CD 210 / CG 210 Hydraulics Mounting types Self-aligning clevis at cylinder cap B Fork clevis at cylinder cap G Trunnion at cylinder cap S Foot mounting F Rectangular flange at cylinder head Foot mounting with splined key C L Square flange at cylinder head Foot mounting with seal ring for subplate mounting H M Rectangular flange at cylinder cap Threaded bores in cylinder head and cap D N Square flange at cylinder cap Foot mounting at front face with splined key K T Trunnion at cylinder head Extended tie rods at cylinder cap R P Trunnion at the center of the cylinder Trunnion at the center of the cylinder E Q RE 17017/08.08
RE 17017/08.08 CD 210 / CG 210 Hydraulics Bosch Rexroth AG 5/72 Ordering code Cylinder Single-rod cylinder CD Double-rod cylinder CG Series 210 Z 1X * Enter stop tube extension 210 Mounting types Self-aligning clevis at cylinder cap B Fork clevis at cylinder cap G Rectangular flange C at cylinder head Square flange at cylinder head H Rectangular flange D at cylinder cap Square flange at cylinder cap K Trunnion R at cylinder head Trunnion at the center of the cylinder 1); 2) E Trunnion at cylinder cap S Foot mounting F Foot mounting with splined key L Foot mounting with seal ring for subplate mounting M Threaded bores in cylinder head and cap N Foot mounting at front face with splined key T Extended tie rod at cylinder head P Extended tie rod at cylinder cap Q A T Pipe connectioncylinder head Enter position Observe table on page 6! M V U K S D B C E F T 6) L 7) M 7) Piston rod Ø (16 to 140 mm) see page 3 H Stroke length in mm 3) C Component series 11 to 19 1X (11 to 19 unchanged installation and connection dimensions) 2) LY 3) 4) 00 The position of the trunnion can be freely selected. Always indicate dimension “XV“ in clear text in mm on the order. Dimension for cylinder with trunnion and piston rod extension “LY“ in the retracted condition: WH 01 02 13 5) 14 5) 5) XV Observe permissible stroke length, pages 63 to 65 The pipe connection sizes are assigned to the piston Ø. Seals Standard version Version for lowfriction operation Pipe connectioncylinder cap Enter position Observe table on page 6 Piston Ø (40 to 200 mm) see page 3 1) Further details in clear text 8) 6) 7) 8) Hydraulic fluid Seals, suitable for mineral oil to DIN 51524 (HL, HLP) (FKM) seals suitable for Phosphate ester (HFD-R) End position cushioning Without (View "Y") on cap side (View "X") on head side On both sides Piston rod end Male thread, see pages 8 to 61 Male thread, see pages 8 to 61 Female thread Thread for self-aligning clevis With self-aligning clevis CGK mounted With self-aligning clevis CGA mounted With self-aligning clevis CGAK mounted Piston rod variant Hardened and chromium hard-plated up to piston rod Ø 100 mm Chromium hard-plated, from piston Ø 80 mm Pipe connection 4) Flanged connection with seal ring; only possible with type of mounting "M" Pipe thread to ISO 228/1 Metric ISO thread Enlarged pipe connection Pipe thread to ISO 228/1 Enlarged pipe connection Metric ISO thread Not possible with piston Ø 200 mm Only possible with Ø 40/16 to 180/80 Only possible with Ø 180/90 to 200/140 Always state mounting of inductive proximity switches or piston rod extension “LY“ in clear text on the order. Order example: CD 210 B50/22-200Z1X/01HBDM1-1A In the case of special variants, an “X” must be entered at the relevant place in the type code, and an SO number must be added at the end.
6/72 Bosch Rexroth AG CD 210 / CG 210 Hydraulics RE 17017/08.08 Position of line ports By turning the cylinder head and/or cylinder cap the position of pipe ports can be varied for most of the cylinder mounting types during installation. The options can be seen in the table below. 1 4 The throttle and check valves change their position accordingly. 2 In the case of mounting types F, L, N and T, as well as on the cylinder cap for type of mounting G, the throttle and check valves are located at position 1 when the pipe connection is rotated. 3 Selectable position of line ports Mounting types At cylinder head At cylinder cap B C D E F G H K L M N P Q R S T 1 1 1 1 1 1 1 1 1 – 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 – 2 2 2 – 2 2 3 3 3 3 – 3 3 3 – 3 – 3 3 3 3 – 4 4 4 4 4 4 4 4 4 – 4 4 4 – 4 4 1 1 1 1 1 1 1 1 1 – 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 – 2 2 2 2 – 2 3 3 3 3 – 3 3 3 – 3 – 3 3 3 3 – 4 4 4 4 4 4 4 4 4 – 4 4 4 4 – 4 Position 2 and 4 not possible for: Piston Ø 40 with enlarged pipe connection 13 and 14 Position 2 and 4 not possible for piston Ø 40; 50 and 63
RE 17017/08.08 CD 210 / CG 210 Hydraulics Bosch Rexroth AG 7/72 Explanations (explanation of items on pages 8 to 61) 1 Selectable position of line ports (see page 6). 12 Check valve and bleed point. The bleed point is provided as standard. 13 Adjustable throttle valve for end position cushioning. 14 Thread versions B and C. Thread versions E and F as well as the associated self-aligning clevis are given on the last page of each piston Ø. 15 Observe the permissible loading for the screwed-on self-aligning clevis. 16 Associated pin Ø with fit m6. Minimum strength of pin material σ0.2 600 N/mm2 (is not included in the scope of supply). 17 Pins and split pins are included in the scope of supply. 20 Grease nipple, cone head form A to DIN 71412. As lubrication greases, commercial, anti-corrosion greases on lithium soap base can be used. 21 Lubrication possible via lubrication bore in the housing. 22 In conjunction with line connection 13 and 14, countersink Ø D1 on cap side is not suitable for seal ring fittings. 23 On the version with enlarged line connection 13 and 14 the distance between the two ports changes. 24 Double-rod cylinder CG, max. tensile loading 13 kN on side “Y”
8/72 Bosch Rexroth AG CD 210 / CG 210 Hydraulics Piston Ø 40 (dimensions in mm) Type of mounting B 1, 22, 23 20 D1; 0,5 EE 34,5 13 17,5 12 16 A-A A B3 45 10 38 8 8 A 10 40 7,5 63 ø 46 R øKK 30 WH For explanations of items, see page 7 Operating pressure 210 bar 14, 15 SW1 RE 17017/08.08 ø15 63 8 3 10 12 XN X* A Type of mounting G Operating pressure 210 bar 14, 15 1 13 12 17 A-A 21 63 1,4 R1 6 WH 63 1,4 A 42 XC X* Type of mounting C 20 0,5 44 56 H7 ø 12,7 f7 Operating pressure with piston rod Ø 16 and 18: 180 bar on cap side; 210 bar on piston rod side Operating pressure with piston rod Ø 25: 110 bar on cap side; 210 bar on piston rod side 1, 22, 23 13 17,5 12 24 MA 40 Nm M10 øRD 11 WH VD 10 A ZJ X* 38 „Y” 10 „Y” „X” 63 41,5 14, 15 15 63 87,5 110 WH X* ZM 2 x X* Strokemin 25 mm with thread version “E“ (only for double-rod cylinder) Piston rod Ø 16 18 25 KK Thread version C, E B F M10 x 1.5 M12 x 1.5 M14 M10 x 1.5 M12 x 1.5 M14 M20 x 1.5 M22 x 1.5 M20 x 1.5 X* stroke length max. tensile load 13 kN A Thread version C, E, B F 19 35 19 35 28 45 01 G1/2 EE Pipe connection 13 02 14 G3/4 M22 x 1.5 M27 x 2 D1 Pipe connection 01 13 02 14 34 42 34 42
RE 17017/08.08 CD 210 / CG 210 Hydraulics Piston Ø 40 (dimensions in mm) Type of mounting H 14, 15 9/72 Bosch Rexroth AG For explanations of items, see page 7 Operating pressure 210 bar 1, 22, 23 13 12 24 WH VD 110 87,5 63 41,5 øRD „Y” „X” WH X* 11 „Y” ZM 2 x X* 41,5 63 87,5 110 10 ZJ X* Strokemin 25 mm with thread version “E“ (only for double-rod cylinder) Type of mounting D Operating pressure 210 bar 14, 15 1, 22, 23 13 12 63 41,5 WH 10 Type of mounting K 11 63 87,5 110 ZF X* Operating pressure 210 bar 14, 15 1, 22, 23 13 12 11 110 87,5 63 41,5 WH Piston rod Ø 16 18 25 ØRD f7 28.5 32 38 X* stroke length 41,5 63 87,5 110 10 ZF X* VD WH XC XN ZF ZJ ZM B3 SW1 6 6 13 16 16 25 162 162 171 193 193 202 153 153 162 143 143 152 176 176 194 5 5 7 13 14 22 Cushioning lengths piston side piston rod side 30 30
10/72 Bosch Rexroth AG CD 210 / CG 210 Hydraulics Piston Ø 40 (dimensions in mm) Type of mounting R Operating pressure 210 bar 1, 22, 23 24 D1; 0,5 EE 17,5 „Y” „X” 63 1,4 „Y” 3 ø 46 øRD øKK 34,5 VD R2 WH SW1 For explanations of items, see page 7 ø25,4 – 0,03 14, 15 RE 17017/08.08 38 63,5 – 0,3 25 8 10 45 XG 25 WH X* ZM 2 x X* B3 A XG 13 ZJ X* 12 Strokemin 25 mm with thread version “E“ (only for double-rod cylinder) Type of mounting E 1, 22, 23 24 MA 40 Nm „Y” 70 1,4 63 M10 WH „Y” R2 ø25,4 –0,03 14, 15 Operating pressure 210 bar „X” 32 25 76 –0,3 WH X* XV 25 XV ZM 2 x X* ZJ X* 10 13 Note: Dimensions for cylinder with piston rod extension “LY“ in the retracted condition, see index 2 on page 5. Strokemin 10 mm Always specify dimension “XV” in clear text on the order (obseve XVmin and XVmax) Strokemin 25 mm with thread version “E“ (only for double-rod cylinder) Operating pressure 210 bar 1, 22, 23 63 WH R2 14, 15 ø25,4 – 0,03 Type of mounting S 12 XJ X* ZJ X* Piston rod Ø 16 18 25 KK Thread version C, E B F M10 x 1.5 M12 x 1.5 M14 M10 x 1.5 M12 x 1.5 M14 M20 x 1.5 M22 x 1.5 M20 x 1.5 X* stroke length max. tensile load 13 kN 38 A Thread version C, E, B F 19 35 19 35 28 45 25 13 01 G1/2 63,5 –0,3 25 12 EE Pipe connection 13 02 14 G3/4 M22 x 1.5 M27 x 2 D1 Pipe connection 01 13 02 14 34 42 34 42
RE 17017/08.08 CD 210 / CG 210 Hydraulics Piston Ø 40 (dimensions in mm) Type of mounting F 14, 15 11/72 Bosch Rexroth AG For explanations of items, see page 7 Operating pressure 210 bar 1, 22, 23 13 WH 12 63 24 3 „Y” 31,7 h10 1 ø18 13 „Y” 63 1,4 7,5 8 ø11,5 82,5 98,5 X* ZJ X* 19 „X” 106 X* ZM 2 x X* 19 WH X* 102 1,5 Strokemin 25 mm with thread version “E“ (only for double-rod cylinder) Type of mounting L 14, 15 Operating pressure 210 bar 1, 22, 23 13 12 24 WH „X” „Y” 5 –0,2 31,7 h10 5 –0,2 „Y” 8 –0,07 8 –0,07 WH X* ZJ X* ZM 2 x X* Strokemin 25 mm with thread version “E“ (only for double-rod cylinder) Type of mounting M Operating pressure 210 bar 14, 15 13 12 24 WH 35,5 31,7 h10 „Y” Seal ring 22 x 2,5 73 X* ZJ X* „X” „Y” ø 19 73 X* ZM 2 x X* 35,5 ø 27 WH X* Strokemin 25 mm with thread version “E“ (only for double-rod cylinder) Piston rod Ø ØRD f7 VD WH XG XJ XV 1) min. XV 1) max. ZJ ZM B3 SW1 16 18 25 28.5 32 38 6 6 13 16 16 25 48 48 57 124 124 133 87 87 96 89 X* 89 X* 98 X* 143 143 152 176 176 194 5 5 7 13 14 22 X* stroke length 1) Cushioning lengths piston piston rod side side 30 30 Always specify dimension “XV” in clear text on the order (observe XVmin and XVmax)
12/72 Bosch Rexroth AG CD 210 / CG 210 Hydraulics Piston Ø 40 (dimensions in mm) Type of mounting N 14, 15 WH For explanations of items, see page 7 Operating pressure 210 bar 1, 22, 23 D1; 0,5 EE 34,5 VD 13 12 24 MA 40 Nm 17,5 10 35,5 B3 A M10 73 X* ZJ X* 8 31,5 –0,2 63 „Y” 38 M10 45 „Y” „X” 73 X* ZM 2 x X* 35,5 18 B2 ø 46 øRD 7,5 øKK SW1 RE 17017/08.08 63 3 WH X* 10 Strokemin 25 mm with thread version “E“ (only for double-rod cylinder) Type of mounting T Operating pressure 210 bar 14, 15 1, 22, 23 13 12 „Y” WH 9,5 Type of mounting P 14, 15 22 22 63 22 3 0,2-0,4 31,5 –0,2 5 – 0,2 8 – 0,07 22,5 „Y” 41,5 10 ø18 ø11,5 ø11,5 41,5 171,5 X* Operating pressure 210 bar 1, 22, 23 13 12 24 M10 WH VD „Y” „Y” „X” 59 35 WH X* øRD ZJ X* ZM 2 x X* Strokemin 25 mm with thread version “E“ (only for double-rod cylinder) Piston rod Ø 16 18 25 KK Thread version C, E B F M10 x 1.5 M12 x 1.5 M14 M10 x 1.5 M12 x 1.5 M14 M20 x 1.5 M22 x 1.5 M20 x 1.5 X* stroke length max. tensile load 13 kN A Thread version C, E, B F 19 35 19 35 28 45 01 G1/2 EE Pipe connection 13 02 14 G3/4 M22 x 1.5 M27 x 2 D1 Pipe connection 01 13 02 14 34 42 34 42
RE 17017/08.08 CD 210 / CG 210 Hydraulics Piston Ø 40 (dimensions in mm) Type of mounting Q 13/72 Bosch Rexroth AG For explanations of items, see page 7 Operating pressure 210 bar 14, 15 1, 22, 23 13 12 M10 WH 59 10 35 ZJ X* Additional thread versions Self-aligning clevis CGK 15 suitable for thread version “F” Material no.: R900001328 Weight: 0.16 kg Permissible load: 18 kN Thread version “E” A 16 21 12 -0,12 41 Ø KK 10 Ø KK 8 21 61 50 81 8 18 ø15 -0,008 8 Thread version “F” ø22 ø26 M14 SW22 B4 Self-aligning clevis CGK 20 B1 A suitable for thread version “F” Material no.: R900001329 Weight: 0.34 kg Permissible load: 30 kN Nut to DIN 936 16 21 16 -0,12 53 13 23 104 9 ø20 -0,010 9 10 30 77 50 M20 x 1,5 SW32 Piston rod Ø 16 18 25 ØRD f7 28.5 32 38 X* stroke length ø28 ø34 B4 VD WH ZJ ZM B1 B2 B3 SW1 8 8 9 6 6 13 16 16 25 143 143 152 176 176 194 14 14 15 12 12 12 5 5 7 13 14 22 Cushioning lengths piston side piston rod side 30 30
14/72 Bosch Rexroth AG CD 210 / CG 210 Hydraulics Piston Ø 50 (dimensions in mm) Type of mounting B For explanations of items, see page 7 Operating pressure 210 bar 14, 15 WH 1, 22, 23 20 D1; 0,5 EE 17,5 13 12 16 A-A A B3 38 45 16 10 9 A 15 45 ø20 3 76 8 14 16 - 0,12 XN X* A Type of mounting G 76 ø 56 R 9 37 40,5 øKK SW1 RE 17017/08.08 Operating pressure 210 bar 14, 15 1 13 12 17 A-A WH 76 1,4 76 1,4 R2 A 4 21 A XC X* Type of mounting C ø19,1 Operating pressure with piston rod Ø 22 and Ø 25: 180 bar on cap side, 210 bar on piston rod side Operating pressure with piston rod Ø 36: 110 bar on cap side, 210 bar on piston rod side 1, 22, 23 WH VD 13 12 MA 70 Nm 14 17,5 M12 øRD 16 65 77 H7 f7 ZJ X* „Y” 38 12 „X” 76 52 14, 15 32,5 0,5 42 27,5 WH X* 76 105 130 ZM 2 x X* Strokemin 30 mm with thread version “E“ (only for double-rod cylinder) Piston rod Ø 22 25 36 KK Thread version C, E B F M16 x 1.5 M20 x 1.5 M20 x 1.5 M20 x 1.5 M22 x 1.5 M20 x 1.5 M26 x 1.5 M30 x 2 M24 x 2 X* stroke length A Thread version C, E, B F 28 45 28 45 41 55 01 G1/2 EE Pipe connection 13 02 14 G3/4 M22 x 1.5 M27 x 2 D1 Pipe connection 01 13 02 14 34 42 34 42
RE 17017/08.08 CD 210 / CG 210 Hydraulics Piston Ø 50 (dimensions in mm) Type of mounting H 14, 15 15/72 Bosch Rexroth AG For explanations of items, see page 7 Operating pressure 210 bar 1, 22, 23 13 12 „X” WH X* 14 „Y” 130 105 76 52 øRD WH VD ZM 2 x X* 52 76 105 130 16 ZJ X* Strokemin 30 mm with thread version “E“ (only for double-rod cylinder) Type of mounting D Operating pressure 210 bar 14, 15 1, 22, 23 13 12 76 52 WH 16 Type of mounting K 76 105 130 14 ZF X* Operating pressure 210 bar 14, 15 1, 22, 23 13 12 14 130 105 76 52 WH Piston rod Ø 22 25 36 ØRD f7 38 38 50 X* stroke length 52 76 105 130 16 ZF X* VD WH XC XN ZF ZJ ZM B3 SW1 6 7 10 19 19 25.5 184 184 190.5 212.5 212.5 219 168.5 168.5 175 152.5 152.5 159 194.5 194.5 207.5 8 8 8 19 22 30 Cushioning lengths piston side piston rod side 30 30
16/72 Bosch Rexroth AG CD 210 / CG 210 Hydraulics Piston Ø 50 (dimensions in mm) Type of mounting R 1, 22, 23 17,5 ø 56 „X” 3 76 øRD „Y” R2 D1; 0,5 EE 40,5 VD øKK SW1 Operating pressure 210 bar – 0,03 WH For explanations of items, see page 7 ø 34,93 14, 15 RE 17017/08.08 38 45 8 16 B3 XG 76 – 0,3 13 ZJ X* A 35 WH X* XG 35 ZM 2 x X* 12 Strokemin 30 mm with thread version “E“ (only for double-rod cylinder) 1, 22, 23 MA 70 Nm „Y” 85 76 M12 WH „X” 38 35 XV ZJ X* 89 – 0,3 13 12 WH X* XV 35 ZM 2 x X* 12 Note: Dimensions for cylinder with piston rod extension “LY“ in the retracted condition, see index 2 on page 5. Strokemin 10 mm Always specify dimension “XV” in clear text on the order (observe XVmin and XVmax) Strokemin 30 mm with thread version “E“ (only for double-rod cylinder) Operating pressure 210 bar 1, 22, 23 ø 34,93 – 0,03 14, 15 76 WH R2 Type of mounting S R2 14, 15 Operating pressure 210 bar ø 34,93 – 0,03 Type of mounting E 35 38 XJ X* ZJ X* Piston rod Ø 22 25 36 KK Thread version C, E B F M16 x 1.5 M20 x 1.5 M20 x 1.5 M20 x 1.5 M22 x 1.5 M20 x 1.5 M26 x 1.5 M30 x 2 M24 x 2 X* stroke length A Thread version C, E, B F 28 45 28 45 41 55 13 01 G1/2 76 – 0,3 35 12 EE Pipe connection 13 02 14 G3/4 M22 x 1.5 M27 x 2 D1 Pipe connection 01 13 02 14 34 42 34 42
RE 17017/08.08 CD 210 / CG 210 Piston Ø 50 (dimensions in mm) Type of mounting F 14, 15 17/72 Bosch Rexroth AG Hydraulics For explanations of items, see page 7 Operating pressure 210 bar 1, 22, 23 13 12 76 8 2 38,1 h10 1 76 1,4 ø20 19 „Y” 10 WH 92 X* ZJ X* 28,5 „X” 28,5 ø14 101,5 125 1,6 99,5 X* ZM 2 x X* WH X* Strokemin 30 mm with thread version “E“ (only for double-rod cylinder) Type of mounting L 14, 15 Operating pressure 210 bar 1, 22, 23 13 12 WH 14 –0,07 „X” 8 –0,2 38,1 h10 8 –0,2 „Y” 14 –0,07 ZJ X* WH X* ZM 2 x X* Strokemin 30 mm with thread version “E“ (only for double-rod cylinder) Type of mounting M Operating pressure 210 bar 14, 15 13 12 WH 41,5 38,1 h10 „Y” Seal ring 22 x 2,5 73 X* ZJ X* ø 27 „X” WH X* 73,5 X* ZM 2 x X* 41,5 ø 19 Strokemin 30 mm with thread version “E“ (only for double-rod cylinder) Piston rod Ø ØRD f7 VD WH XG XJ 22 25 36 38 38 50 6 7 10 19 19 25.5 57 57 63.5 133.5 133.5 140 X* stroke length 1) XV 1) min. XV 1) max. ZJ 99 95 X* 152.5 99 95 X* 152.5 105.5 102 X* 159 ZM B3 SW1 194.5 194.5 207.5 8 8 8 19 22 30 Cushioning lengths piston piston side rod side 30 30 Always specify dimension “XV” in clear text on the order (observe XVmin and XVmax)
18/72 Bosch Rexroth AG CD 210 / CG 210 Hydraulics Piston Ø 50 (dimensions in mm) Type of mounting N 14, 15 WH For explanations of items, see page 7 Operating pressure 210 bar 1, 22, 23 D1; 0,5 EE 40,5 VD 13 12 MA 70 Nm 17,5 16 41,5 B3 A M12 73 X* ZJ X* 8 „X” 38 – 0,2 76 „Y” 38 M12 45 24 B2 ø 56 ø RD 10 ø KK SW1 RE 17017/08.08 73,5 X* ZM 2 x X* 41,5 76 3 WH X* 12 Strokemin 30 mm with thread version “E“ (only for double-rod cylinder) Type of mounting T Operating pressure 210 bar 14, 15 1, 22, 23 13 12 „Y” 14 – 0,07 24 13 25 „Y” 76 25 4,5 8 – 0,2 0,2-0,4 38 –0,2 WH 13,5 23,5 52 ø 20 ø 14 ø 14 52 181 X* Type of mounting P M12 14, 15 Operating pressure 210 bar 1, 22, 23 13 12 WH VD „X” „Y” 74 45 WH X* øRD ZJ X* ZM 2 x X* Strokemin 30 mm with thread version “E“ (only for double-rod cylinder) Piston rod Ø 22 25 36 KK Thread version C, E B F M16 x 1.5 M20 x 1.5 M20 x 1.5 M20 x 1.5 M22 x 1.5 M20 x 1.5 M26 x 1.5 M30 x 2 M24 x 2 X* stroke length A Thread version C, E, B F 28 45 28 45 41 55 01 G1/2 EE Pipe connection 13 02 14 G3/4 M22 x 1.5 M27 x 2 D1 Pipe connection 01 13 02 14 34 42 34 42
RE 17017/08.08 CD 210 / CG 210 Hydraulics Piston Ø 50 (dimensions in mm) Type of mounting Q 19/72 Bosch Rexroth AG For explanations of items, see page 7 Operating pressure 210 bar 14, 15 1, 22, 23 13 12 M12 WH 74 10 ZJ X* 45 Additional thread versions Self-aligning clevis CGK 20 suitable for thread version “F” Material no.: R900001329 Weight: 0.34 kg Permissible load: 30 kN Thread version “E” A 16 -0,12 21 53 13 23 104 Ø KK 10 30 77 50 Thread version “F” 9 ø20 -0,010 9 Ø KK 16 ø28 ø34 M20 x 1,5 SW32 B4 Self-aligning clevis CGK 25 B1 suitable for thread version “F” Material no.: R900001330 Weight: 0.6 kg Permissible load: 42 kN Nut to DIN 936 A 16 20 20 -0,12 64 17 94 12 36 Piston rod Ø 22 25 36 ØRD f7 38 38 50 X* stroke length 126 27 7 ø25 -0,010 7 50 M24 x 2 ø35 ø42 SW36 B4 VD WH ZJ ZM B1 B2 B3 SW1 9 9 10 6 7 10 19 19 25.5 152.5 152.5 159 194.5 194.5 207.5 15 15 19 16 16 12 8 8 8 19 22 30 Cushioning lengths piston side piston rod side 30 30
20/72 Bosch Rexroth AG CD 210 / CG 210 Hydraulics Piston Ø 63 (dimensions in mm) Type of mounting B For explanations of items, see page 7 Operating pressure 210 bar 14, 15 1, 22, 23 20 D1; 0,5 EE 40,5 13 12 16 A-A 17,5 A B3 38 XN X* A 7 7 14 45 16 Type of mounting G 89 ø 73 R øKK 44 WH SW1 RE 17017/08.08 A 15 55 ø 25 10 89 9 18 20 - 0,12 Operating pressure 210 bar 14, 15 1 13 12 17 A-A WH 89 1,5 89 1,5 R2 A 4 21 A 32,5 0,5 42 27,5 XC X* Type of mounting C 1, 22, 23 WH VD 13 14 M12 øRD ZJ X* 12 MA 80 Nm 17,5 „Y” 38 16 65 77 Operating pressure with piston rod Ø 25 and Ø 28: 180 bar on cap side, 210 bar on piston rod side Operating pressure with piston rod Ø 36 and Ø 45:110 bar on cap side, 210 bar on piston rod side 12 „X” 89 65 14, 15 ø 19,1 H7 f7 WH X* 89 117,5 140 ZM 2 x X* Strokemin 30 mm with thread version “E“ (only for double-rod cylinder) Piston rod Ø 25 28 36 45 KK Thread version C, E B F M20 x 1.5 M22 x 1.5 M24 x 2 M20 x 1.5 M22 x 1.5 M24 x 2 M26 x 1.5 M30 x 2 M30 x 2 M33 x 2 M39 x 2 M30 x 2 X* stroke length A Thread version C, E, B F 28 55 28 55 41 65 50 65 01 G1/2 EE Pipe connection 13 02 14 G3/4 M22 x 1.5 M27 x 2 D1 Pipe connection 01 13 02 14 34 42 34 42
RE 17017/08.08 CD 210 / CG 210 Hydraulics Piston Ø 63 (dimensions in mm) Type of mounting H 14, 15 21/72 Bosch Rexroth AG For explanations of items, see page 7 Operating pressure 210 bar 1, 22, 23 13 12 „X” WH X* 14 „Y” 140 117,5 89 65 øRD WH VD ZM 2 x X* 65 89 117,5 140 16 ZJ X* Strokemin 30 mm with thread version “E“ (only for double-rod cylinder) Type of mounting D Operating pressure 210 bar 14, 15 1, 22, 23 13 12 89 65 WH 16 Type of mounting K 14 89 117,5 140 ZF X* Operating pressure 210 bar 14, 15 1, 22, 23 13 12 14 140 117,5 89 65 WH Piston rod Ø 25 28 36 45 ØRD f7 38 42 50.7 60 X* stroke length 65 89 117,5 140 16 ZF X* VD WH XC XN ZF ZJ ZM B3 SW1 6 6 10 13 19 19 25.5 32 187 187 193.5 200 225.5 225.5 232 238.5 171.5 171.5 178 184.5 155.5 155.5 162 168.5 197.5 197.5 210.5 223.5 8 8 10 12 22 22 30 41 Cushioning lengths piston side piston rod side 30 30
22/72 Bosch Rexroth AG CD 210 / CG 210 Hydraulics Piston Ø 63 (dimensions in mm) Type of mounting R Operating pressure 210 bar 1, 22, 23 17,5 „X” 9 „Y” 89 ø 73 øRD øKK SW1 D1; 0,5 EE R2 40,5 VD – 0,03 WH For explanations of items, see page 7 ø 34,93 14, 15 RE 17017/08.08 38 10 16 45 B3 XG Type of mounting E MA 80 Nm „Y” 38 R2 „X” 35 12 ZJ X* 101,5 – 0,3 13 WH X* XV 35 ZM 2 x X* 12 Note: Dimensions for cylinder with piston rod extension “LY“ in the retracted condition, see index 2 on page 5. Strokemin 10 mm Always specify dimension “XV” in clear text on the order (observe XVmin and XVmax) Strokemin 30 mm with thread version “E“ (only for double-rod cylinder) Operating pressure 210 bar 1, 22, 23 89 WH R2 14, 15 ø 34,93 – 0,03 Type of mounting S Strokemin 30 mm with thread version “E“ (only for double-rod cylinder) 95 1,5 89 M12 WH XV 12 Operating pressure 210 bar 1, 2
Bosch Rexroth AG. Checklists for hydraulic cylinders: Cylinders, the operating data of which differ from the specified values, can only be offered as special variants on request. For the preparation of offers, the deviations of technical data and/or operating data must be described in the checklists for hydraulic cylinders (RE 07200).
Bimba Pneu-Turn Rotary Actuators Pneu-Turn Rotary Actuators TURN TO THE BIMBA PNEU-TURN ROTARYACTUATOR FOR THESE QUALITY FEATURESATA LOWER COST: The Bimba Pneu-Turn Rotary Actuator is available with these catalog options: 1. CYLINDER BODIES – 304 stainless steel for maximum seal life. 2.
The cylinders are available both as single and double acting version, steel, aluminum or stainless steel made, with short or long strokes, a very varied range of compact, hollow cylinders, extra flat or high tonnage cylinders suitable for the customer's application. F.P.T. HYDRAULIC CYLINDERS HYDRAULIC CYLINDERS INDEX 34 32 30 28 26 24 22 20 .
37 wheel loader dl300a doosan 2ea 2013 38 hyd crane rt650e grove 1ea 45ton 39 hyd crane gr500ex tadano 8ea 50ton 40 hyd crane rt765e grove 3ea 60ton 41 hyd crane gr800ex tadano 2ea 80ton 42 hyd crane gmk4100l grove 1ea 100ton 43 crawler crane cks800 kobelco 2ea 80ton .
FMC-75SP-HYD-LM 49695 Self-Priming pump less motor. 13 817.00 FMCSC Silicon carbide seal adder. 97.00 FMC-75SP-HYD-204 NEW! FMC-75-HYD-204 NEW! See pages B-21 and B-23 for parts. October 2020 A-5 Pumps MODEL EDP DESCRIPTION LBS PRICE FMC-HYD-202 49825 Cast iron centrifugal driven by a 2 GPM hydraulic
section b 2015 parts catalog section b hydraulic cylinders & pumps page backhoe cylinders case b9-b14. cat b22: john deere b16-b17; . dresser b24: john deere b24. skidder cylinders. john deere b20. skid steer cylinders. case b14. wheel loader cylinders. case b14. b1. 2015 parts catalog. cylinder index. ca
Metric Hydraulic Cylinders Series AHM Catalog HY04-AC1151-2/NA 2 Atlas Cylinders Des Plaines, IL USA www.AtlasCylinders.com Cylinder Application Bores to 42" and Strokes to 900". Full range of offering from micro cylinders to cylinders over 40,000 lbs. Custom Cylinders Our popularly priced line of medium pr
landing gear, main engines, and aerosurfaces HYD system 3 HYD system 2 HYD system 1 Distributes hydraulic fluid to effectors at 3200 psi APU 3 APU 2 APU 1 Converts stored chemical energy into mechanical power WSB 3 WSB 2 WSB 1 Cools APU lube oil and hydraulic fluid HY
playing field within the internal market, even in exceptional economic circumstances. This White Paper intends to launch a broad discussion with Member States, other European institutions, all stakeholders, including industry, social partners, civil society organisations,
