Miller MHP Series - Royalhydraulics
Miller MHP Series Hydraulic Cylinders ISO 6020/2 Catalog M1151-3 October, 2016 Working pressure up to 210 bar Bore sizes – 25mm to 200mm 12 Mounting Styles
Metric Hydraulic Cylinders MHP Series Catalog HY08-M1151-3/NA View Table of Contents AV Series Cylinders CHD & CHE Series Compact Hydraulic Cylinders Up to 250 psi Permanently Lubricated CHD up to 207 bar & CHE up to 140 bar AV Series air cylinders are available in bore sizes from 1.50" through 20.00" and up to 250 psi operating pressure. Standard NFPA dimensions and proven Miller design features. CHE Series compact hydraulic cylinders are available in bore sizes from 20mm through 100mm and CHD Series in bore sizes 20mm through 80mm. HV2 Series Cylinders JV Series Cylinders Up to 3,000 psi 400-2,300 psi Pressures are bore size dependent. HV2 Series heavy-duty hydraulic cylinders are designed with proven Miller features for superior performance and may be used for working pressures up to 3,000 psi. Bore sizes from 1.50" through 20.00". Our popularly-priced line of medium pressure hydraulic cylinders, with bore sizes from 1.00" to 8.00". In line with our policy of continuing product improvement, specifications and information contained in this catalog are subject to change. Copyright 2016 by Parker Hannifin Corporation. All rights reserved. PRINTED IN THE U.S.A. Warning FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application, including consequences of any failure and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The product described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice. Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by provisions stated on a separate page of the document entitled ‘Offer of Sale’. 4 www.miller-fluidpower.com Miller Fluid Power Des Plaines, IL
Catalog HY08-M1151-3/NA Table of Contents Metric Hydraulic Cylinders MHP Series Contents Page Introduction. 2 MHP Specifications. 3 Mounting Styles and Applications. 3 Design Features and Benefits. 4-5 Piston Rod End Data and Threads. 7 Cylinder Dimensions. 8 Double Rod Cylinders. 12 Rod and Cap End Accessories. 13 Mounting Information. 16-17 Theoretical Push & Pull Forces and Stroke Factors. 18 Piston Rod Sizes, Stop Tubes and Long Stroke Cylinders. 19 Cushioning. 20-22 Pressure Limitations. 22 Seals and Fluids. 23 Ports, Locations and Piston Speeds, Weights. 24-25 Optional Features. 26 Replacement Parts and Service. 28-29 How to Order Cylinders. 30-31 Cylinder Safety Guide. 32-33 Index Page Accessories. 13 Air Bleeds. 4, 26 Cushioning. 20-22 Cylinder Dimensions. 8 Design Features. 4, 5 Double Rod Cylinders. 12 Forces – Push and Pull. 18 Bushing Drains. 5, 26 How to Order Cylinders. 30 Model Numbers. 31 Mounting Styles and Information. 3, 16-17 Piston Rod End Data. 7 Piston Rod Size Selection. 19 Piston and Seal Types. 5, 26 Ports – Standard and Oversize. 24-25 Pressure Ratings and Limitations. 22 Repairs. 28-29 Seals and Fluids. 23 Spare Parts. 28 Speed Limitations. 24 Stop Tubes. 19 Stroke Adjusters. 26 Stroke Factors. 18 Stroke Tolerances. 17 Thrust Keys. 16 Water Service. 23 Weights. 25 1 www.miller-fluidpower.com Miller Fluid Power Des Plaines, IL
Metric Hydraulic Cylinders MHP Series Catalog HY08-M1151-3/NA Features & Benefits View Table of Contents Miller MHP Series Metric Hydraulic Cylinders As a world leader in the design and manufacture of pneumatic and hydraulic cylinders, Miller Fluid Power introduces the MHP Series metric hydraulic cylinder. Miller Fluid Power’s MHP Series cylinders are designed to meet the requirements of ISO 6020/2 (1991), 160 bar Compact Series. MHP Series cylinders may be used for working pressures up to 210 bar. Miller Fluid Power MHP Series cylinders are the true world standard, available all over the globe from worldwide manufacturing facilities. Introduction The MHP Series cylinders described in this catalog are 160 bar Compact Series cylinders to ISO 6020/2 rated for use at working pressures up to 210 bar. They have been designed to satisfy the requirements of a wide range of industries in which cylinders to ISO standards are specified. In addition to the standard cylinders featured in this catalog, MHP cylinders can be designed to suit customer requirements. Our engineers will be pleased to advise on unique designs to suit specific applications. 2 www.miller-fluidpower.com Miller Fluid Power Des Plaines, IL
Catalog HY08-M1151-3/NA Features / Specifications / Mountings Metric Hydraulic Cylinders MHP Series MHP Series Standard Features and Specifications View Table of Contents ISO 6020/2 mounting interchangeable 12 standard mounting styles Up to 3 rod sizes per bore Wide range of mounting accessories Up to 3 male and 3 female rod end threads per bore Bore sizes – 25mm to 200mm Strokes – available in any practical stroke length Working pressure up to 210 bar Piston rods – 12mm to 140mm Single and Double rod designs Cushions available at either or both ends Temperature Range – -20 C to 150 C depending on seal type Seal types to suit a wide variety of operating environments In line with our policy of continuing product improvement, specifications in this catalog are subject to change. Available Mountings ISO MX3 Model 53 Model 52 Model 51 ISO ME5 Model 67 Model 72 ISO MP3 ISO MP5 ISO MP1 Model 84 Model 94 ISO MT1 Model 81 ISO MS2 ISO ME6 Model 68 Model 90 ISO MX1 ISO MX2 ISO MT4 ISO MT2 Model 82 Model 89 3 www.miller-fluidpower.com Miller Fluid Power Des Plaines, IL
Metric Hydraulic Cylinders MHP Series Catalog HY08-M1151-3/NA Design Features & Benefits View Table of Contents Here is the inside story of why the MHP Series is your best choice in a metric heavy duty hydraulic cylinder 3 5 2 1 1 Piston Rod Rod seal life is maximized by manufacturing piston rods from precision ground, high tensile carbon alloy steel, hard chrome plated and polished to 0.2µm max. Piston rods are induction case hardened to Rockwell C54 minimum before chrome plating, resulting in a dent-resistant surface. 2 Bushing Continuous lubrication, and therefore longer bushing life, are provided by the long iron bearing surface inboard of the primary seal. The bushing, complete with rod seals, can easily be removed without dismantling the cylinder and without special tools, so servicing is quicker – and therefore more economical. 3 Rod Seals 4 4 Cylinder Tube The Tuff Seal primary seal has a series of sealing edges which take over successively as pressure increases, pro vid ing efficient sealing under all operating conditions. On the return stroke the serrations act as a check valve, allow ing the oil adhering to the rod to pass back into the cylinder. Strict quality control standards and precision manufacture ensure that all tubes meet rigid standards of straightness, roundness and surface finish. The steel tubing is surface finished to minimize internal friction and prolong seal life. 5 Cylinder Tube End Seals The double lip wiperseal acts as a secondary seal, trapping excess lubricating film in the chamber between the wiper and lip seals. Its outer lip prevents the ingress of dirt into the cylinder, extending the life of gland and seals. To make sure that the cylinder tube remains leaktight, even under pressure shock conditions, Miller Fluid Power utilizes pressure-energized tube end seals. The Tuff Seal is manufactured from an enhanced polyurethane, giving efficient retention of pressurized fluid and long service life. 6 One-Piece Piston A long thread engagement secures the piston to the piston rod and, as an added safety feature, pistons are secured by an anaerobic adhesive. Optional Air Bleeds Servo Cylinders Available as an option at both ends, the air bleeds are recessed into the head and cap. Servo cylinders permit fine control of acceleration, velocity and position in applications where very low friction and an absence of stick-slip are required. They may be used in conjunction with integral or external transducers. Servo cylinders combine low friction piston and bushing seals with specially selected tubes and rods. For low-friction appli cations – consult factory. Seal Classes To accommodate the many types of fluids and the varying temperature ranges used in industry, Miller Fluid Power offers a range of rod bushing, piston and tube seals. 4 www.miller-fluidpower.com Miller Fluid Power Des Plaines, IL
Metric Hydraulic Cylinders MHP Series Catalog HY08-M1151-3/NA Design Features & Benefits View Table of Contents 9 Cushion Adjustment 6 Needle valves are provided at both ends of the cylinder for precise cushion adjustment. 63mm bores and smaller contain the cartridge cushion assembly shown below. 8 10 Piston Seals Standard on 25mm, 32mm and 40mm bore sizes, Miller’s Lipseal Piston provides zero leakage under static conditions for hydraulic pressures up to 3000 psi. Seals are self-compensating to conform to variations in pressure, mechanical deflection, and wear. Back-up washers prevent extrusion. 7 7&8 9 7 Cushioning Standard on 50mm bore sizes and larger, Miller’s B style piston is a single seal design which incorporates two wear strips. This design provides smooth operation, long bearing life, and high load carrying capacity. Progressive deceleration is available by using profiled cushions at the head and cap. The head end cushion is self aligning, while the polished cap end plunger is an integral part of the piston rod. 8 Floating Cushion Bushings and Plungers Closer tolerances – and therefore more effective cushioning – are permitted by the use of a floating cushion plunger at the head end of the cylinder, and a floating cushion bushing at the cap end. A slotted cushion plunger on the head end, and the floating bronze cushion bushing in the cap, provide minimum fluid restriction at the start of the return stroke. This allows full pressure to be applied over the entire area of the piston, providing full power and fast cycle times. Bushing Drains The accumulation of fluid behind the bushing wiperseal of long stroke cylinders, or cylinders with constant back pressure, can be relieved by specifying the option of a bushing drain. A port between the wiperseal and primary seal allows fluid to be piped back to a reservoir. By fitting a transparent tube between the port and the reservoir, fluid loss from concealed or inaccessible cylinders can be monitored to provide an early indication of the need for bushing servicing. 5 www.miller-fluidpower.com Miller Fluid Power Des Plaines, IL
Metric Hydraulic Cylinders MHP Series Catalog HY08-M1151-3/NA Mounting Styles and Applications ISO Cylinder Mounting Styles View Table of Contents The standard range of Miller Fluid Power MHP Series cylinders comprises 12 ISO mounting styles to suit the majority of applications. General guidance for the selection of ISO cylinders is given below, with dimensional information about each mounting style shown on the following pages. Application-specific mounting information is shown in the mounting information section of this catalog. Extended Tie Rods Cylinders with 53, 52 and 51 mountings are suitable for straight line force transfer applications, and are particularly useful where space is limited. For compression (push) applications, cap end tie rod mountings are most appropriate; where the major load places the piston rod in tension (pull applications), head end mounting styles should be specified. Cylinders with tie rods extended at both ends may be attached to the machine member from either end, allowing the free end of the cylinder to support a bracket or switch. Flange Mounted Cylinders These cylinders are also suitable for use on straight line force transfer applications. Two flange mounting styles are available, offering either a head flange (67) or a cap flange (68). Selection of the correct flange mounting style depends on whether the major force applied to the load will result in compression (push) or tension (pull) stresses on the piston rod. For compression-type applications, the cap mounting style is most appropriate; where the major load places the piston rod in tension, a head mounting should be specified. Models 53, 52, 51 ISO Styles MX3, MX2, MX1 53 Models 67, 68 ISO Styles ME5, ME6 68 Model 72 ISO Style MS2 72 Models 90, 84, 94 ISO Styles MP3, MP1, MP5 84 Models 81, 82, 89 ISO Styles MT1, MT2, MT4 82 Foot Mounted Cylinders Model 72, foot mounted cylinders, do not absorb forces on their centerline. As a result, the application of force by the cylinder produces a moment which attempts to rotate the cylinder about its mounting bolts. It is important, therefore, that the cylinder should be firmly secured to the mounting surface and that the load should be effectively guided to avoid side loads being applied to rod gland and piston bearings. A thrust key modification may be specified to provide positive cylinder location. Pivot Mountings Cylinders with pivot mountings, which absorb forces on their centerlines, should be used where the machine member to be moved travels in a curved path. Pivot mountings may be used for tension (pull) or compression (push) applications. Cylinders using a fixed clevis, models 84 and 90, may be used if the curved path of the piston rod travel is in a single plane; for applications where the piston rod will travel in a path on either side of the true plane of motion, a spherical bearing mounting 94 is recommended. Trunnion Mounted Cylinders These cylinders, models 81, 82 and 89, are designed to absorb force on their centerlines. They are suitable for tension (pull) or compression (push) applications, and may be used where the machine member to be moved travels in a curved path in a single plane. Trunnion pins are designed for shear loads only and should be subjected to minimum bending stresses. 6 www.miller-fluidpower.com Miller Fluid Power Des Plaines, IL
Metric Hydraulic Cylinders MHP Series Catalog HY08-M1151-3/NA Piston Rod End Data and Threads View Table of Contents Thread Styles M & S – All Except 67 Mount Thread Styles M & S – 67 Mount A WF WF VE VE A VJ MM RD B NA KK B NA KK 25 & 32mm Bore Cylinders E Thread Style T – Short Stroke Cylinders Style T (female) rod ends should not be used on 160mm or 200mm bore cylinders with a stroke of 50mm or less. Please consult the factory, with details of the application. D Wrench Flats FJ Thread Style T – All Except 67 Mount VL Thread Style T – 67 Mount WF WF VE VE VJ NA KF MM RD B NA KF MM D Wrench Flats D Wrench Flats VL A FJ A Piston Rod End Dimensions 5mm E Thread Style X Non-standard piston rod ends are designated ‘Style X’. A dimensional sketch or description should accompany the order. Please specify dimensions KK or KF, A, rod stand out WF and thread type. 5mm extra height applies to port face at head end only. Bushing Retainer – 160 and 200mm Bore On all 160mm and 200mm bore ISO mounting styles except 53 and 51, the bushing retainer is separately bolted to the head, as shown. Bore Rod MM Style M Style S Style T B D NA VE WF 67 Mount Only Ø No. Rod f9 VL RD VJ Ø KK A KK A KF A min f8 25 1 12 M10x1.25 14 2 18 M14x1.5 32 1 14 M12x1.25 16 2 22 M16x1.5 40 1 18 M14x1.5 18 2 28 M20x1.5 28 1 22 M16x1.5 22 50 2 36 M27x2 36 M16x1.5 22 3 28 M20x1.5 28 M16x1.5 1 28 M20x1.5 28 63 18 22 - - M10x1.25 14 - - M12x1.25 16 M14x1.5 - - - 14 24 10 11 16 M12x1.25 18 M8x1 30 15 17 16 M10x1.25 16 26 12 13 22 M16x1.5 34 19 21 22 22 3 38 6 10 35 3 42 12 10 M12x1.25 18 30 15 17 18 M20x1.5 28 42 22 26 16 35 3 62 22 12 - M16x1.5 22 34 19 21 22 6 M27x2 36 50 30 34 25 9 22 M20x1.5 28 42 22 26 22 6 - M20x1.5 28 42 22 26 22 6 29 41 4 74 75 6 2 45 M33x2 45 M20x1.5 28 M33x2 45 60 41 43 36 M27x2 36 M20x1.5 28 M27x2 36 50 30 34 48 4 88 25 13 3 1 36 M27x2 36 - M27x2 36 50 30 34 25 82 5 80 2 56 M42x2 56 M27x2 36 M42x2 56 72 50 54 29 3 45 M33x2 45 M27x2 36 M33x2 45 60 41 43 29 105 9 1 45 M33x2 45 - M33x2 45 60 41 43 29 2 70 M48x2 63 M33x2 45 M48x2 63 88 60 68 32 3 56 M42x2 56 M33x2 45 M42x2 56 72 50 54 125 29 1 56 M42x2 56 - M42x2 56 72 50 54 29 2 90 M64x3 85 M42x2 56 M64x3 85 108 80 88 32 3 70 M48x2 63 M42x2 56 M48x2 63 88 60 68 32 88 60 68 32 125 - - - - 51 571 571 4 5 1 70 M48x2 63 - M48x2 63 2 110 M80x3 95 M48x2 63 M80x3 95 133 100 108 32 3 90 M64x3 85 M48x2 63 M64x3 85 108 80 88 32 80 88 32 1 90 M64x3 85 - M64x3 85 108 2 140 M100x3 112 M64x3 - 85 M100x3 112 163 128 138 32 3 110 M80x3 95 85 M80x3 95 133 100 108 32 M64x3 571 571 92 5 160 200 5 5 www.miller-fluidpower.com 10 16 16 9 20 7 10 22 7 105 9 20 150 10 22 125 10 22 170 7 25 150 10 22 210 7 25 All dimensions are in millimeters unless otherwise stated. 1 Use WD dimension for mounting Model 81 in 100mm - 200mm bore. See Model 81 page for details. 7 FJ 25 100 5mm MM D Wrench Flats B Thread Styles M & S The smallest diameter rod end thread for each bore size is designated Style M. When the same rod end thread is supplied with an oversize rod it is designated Style S. Miller Fluid Power Des Plaines, IL
Metric Hydraulic Cylinders MHP Series Catalog HY08-M1151-3/NA Extended Tie Rod Mountings ZJ J Stroke PJ Stroke Y View Table of Contents WF 1 EE WH E 1 1 4 E Model 53 Tie Rods Extended Head End (ISO Style MX3) DD BB G FT 2 TG AA 2 TG AA 2 TG 3 TG KB J AA ZJ J Stroke PJ Stroke Y WF 1 DD EE E 1 1 E Model 52 Tie Rods Extended Cap End (ISO Style MX2) KB G F Y 4 3 TG BB J ZJ J Stroke PJ StrokeJ WF 1 DD EE WH E 1 1 E Model 51 Tie Rods Extended Both Ends (ISO Style MX1) 1 BB FT G 4 3 TG BB J Head depth increased by 5mm to accommodate port on 25mm and 32mm bore cylinders – see piston rod end data page. Dimensions – 53, 52, 51 See also Rod End Dimensions and Mounting Information Bore Ø 25 32 40 50 63 80 100 125 160 200 AA BB DD E EE BSP/G F FT G J KB TG WF WH Y Stroke PJ inches ZJ 40 47 59 74 91 117 19 24 35 46 46 59 M5x0.8 M6x1 M8x1 M12x1.25 M12x1.25 M16x1.5 401 451 63 75 90 115 1/4 1/4 3/8 1/2 1/2 3/4 10 10 10 16 16 20 10 10 10 16 16 20 40 40 45 45 45 50 25 25 38 38 38 45 4 5 6.5 10 10 13 28.3 33.2 41.7 52.3 64.3 82.7 25 35 35 41 48 51 15 25 25 25 32 31 50 60 62 67 71 77 53 56 73 74 80 93 114 128 153 159 168 190 137 178 219 269 59 81 92 115 M16x1.5 M22x1.5 M27x2 M30x2 130 165 205 245 3/4 1 1 1-1/4 22 22 25 25 22 22 25 25 50 58 58 76 45 58 58 76 13 18 22 24 96.9 125.9 154.9 190.2 57 57 57 57 35 35 32 32 82 86 86 98 101 117 130 165 203 232 245 299 All dimensions are in millimeters unless otherwise stated. 8 www.miller-fluidpower.com Miller Fluid Power Des Plaines, IL
Metric Hydraulic Cylinders MHP Series Catalog HY08-M1151-3/NA Flange and Side Lug Mountings ZB Stroke ZJ J Stroke View Table of Contents Y WF UO PJ Stroke EE E 1 2 R E2 4 Model 67 Head Rectangular Flange (ISO Style ME5) G 3 TF KB J FBØ ZJ J Stroke PJ StrokeJ Y WF UO E 1 EE Model 68 Cap Rectangular Flange (ISO Style ME6) KB G F FBØ View at Z ZJ Stroke Y 3 A thrust key may be used with this mounting style. SB PJ Stroke EE WF 0.5 3 -0.0 1 2 E Ø SB (HEAD) 2 4 LH ST F Model 72 Side Lugs (ISO Style MS2) 2 3 E 3 TF J ZB J Stroke 1 1 2 R 4 G J SW SS Stroke XS 3 E KB Z SW TS US Head depth increased by 5mm to accommodate port on 25mm and 32mm bore cylinders, except Model 67 in port positions 2 and 4 – see port information. On 25mm and 32mm bore Model 72 and Model 68 cylinders with port in position 2 or 4, head depth E is increased by 5mm in position 1. On 25mm and 32mm bore Model 72 cylinders both head and cap mounting holes are slotted (also both heads of double rod styles). Dimensions – 67, 68 & 72 See also Rod End Dimensions and Mounting Information. Bore Ø 25 32 40 50 63 80 100 125 160 200 E 40 451 63 75 90 115 130 165 205 245 1 EE F FB G J KB LH R SB ST SW TF TS UO US WF XS Y Stroke BSP/G h10 PJ inches SS ZB ZJ 1/4 1/4 3/8 1/2 1/2 3/4 3/4 1 1 1-1/4 73 73 98 92 86 105 102 131 130 172 121 137 166 176 185 212 225 260 279 336 114 128 153 159 168 190 203 232 245 299 10 10 10 16 16 20 22 22 25 25 5.5 6.6 11 14 14 18 18 22 26 33 40 40 45 45 45 50 50 58 58 76 25 25 38 38 38 45 45 58 58 76 4 5 6.5 10 10 13 13 18 22 24 19 22 31 37 44 57 63 82 101 122 27 33 41 52 65 83 97 126 155 190 6.6 9 11 14 18 18 26 26 33 39 8.5 12.5 12.5 19 26 26 32 32 38 44 8 10 10 13 17 17 22 22 29 35 51 58 87 105 117 149 162 208 253 300 54 63 83 102 124 149 172 210 260 311 65 70 110 130 145 180 200 250 300 360 72 84 103 127 161 186 216 254 318 381 25 35 35 41 48 51 57 57 57 57 33 45 45 54 65 68 79 79 86 92 50 60 62 67 71 77 82 86 86 98 53 56 73 74 80 93 101 117 130 165 All dimensions are in millimeters unless otherwise stated. 9 www.miller-fluidpower.com Miller Fluid Power Des Plaines, IL
Metric Hydraulic Cylinders MHP Series Catalog HY08-M1151-3/NA Pivot Mountings JZC Stroke ZJ Stroke Pivot pin not supplied View Table of Contents Y 1 E 1 1 E PJ StrokeJ EE WF 4 2 3 Model 90 Cap Fixed Eye (ISO Style MP3) LR KB EW F G 1 E 1 M CD Hole H9 Pin f8 4 2 CW LR KB CB CW F G J MR L M XC Stroke Pivot pin not supplied. Grease fitting not supplied on bore sizes 25-40mm. 1 E 1 1 4 Model 94 Cap Fixed Eye with Spherical Bearing (ISO Style MP5) ZO Stroke ZJ Stroke Y PJ StrokeJ EE WF E 2 1 PJ StrokeJ EE WF 3 Model 84 Cap Fixed Clevis (ISO Style MP1) L ZJ Stroke Y 1 J MR XC Stroke JZC Stroke Supplied complete with pivot pin E CD CX 3 3 3 MS KB EP F G J LT XO Stroke EX Head depth increased by 5mm to accommodate port on 25mm and 32mm bore cylinders – see piston rod end data page. Dimensions – 90, 84 & 94 See also Rod End Dimensions and Mounting Information. Bore Ø 25 32 40 50 63 80 100 125 160 200 CB CD CW CX E EE EP EW EX F BSP/G A16 H9 inches 12 16 20 30 30 40 50 60 70 80 10 12 14 20 20 28 36 45 56 70 6 8 10 15 15 20 25 30 35 40 12-0.008 16-0.008 20-0.012 25-0.012 30-0.012 40-0.012 50-0.012 60-0.015 80-0.015 100-0.020 40 451 63 76 90 115 130 165 205 245 1 1/4 1/4 3/8 1/2 1/2 3/4 3/4 1 1 1-1/4 G J KB L LR LT M MR MS WF Y h14 max PJ 8 11 13 17 19 23 30 38 47 57 12 16 20 30 30 40 50 60 70 80 10 14 16 20 22 28 35 44 55 70 10 10 10 16 16 20 22 22 25 25 40 40 45 45 45 50 50 58 58 76 25 25 38 38 38 45 45 58 58 76 4 5 6.5 10 10 13 13 18 22 24 13 19 19 32 32 39 54 57 63 82 12 16 17 20 17 25 29 31 29 38 34 48 50 58 53 72 59 92 78 116 10 12 14 20 20 28 36 45 59 70 Stroke XC XO ZC ZJ ZO 12 20 25 50 53 127 130 137 15 22.5 35 60 56 147 148 159 16 29 35 62 73 172 178 186 25 33 41 67 74 191 190 211 25 40 48 71 80 200 206 220 34 50 51 77 93 229 238 257 44 62 57 82 101 257 261 293 53 80 57 86 117 289 304 334 59 100 57 86 13 0 308 337 367 76 120 57 98 165 381 415 451 114 128 153 159 168 190 203 232 245 299 150 170.5 207 223 246 288 323 384
Metric Hydraulic Cylinders MHP Series Catalog HY08-M1151-3/NA 4 www.miller-fluidpower.com Miller Fluid Power Des Plaines, IL HV2 Series Cylinders Up to 3,000 psi CHD & CHE Series Compact Hydraulic Cylinders CHD up to 207 bar & CHE up to 140 bar AV Series Cylinders Up to 250 psi Permanently Lubricated Our popularly-priced line of medium pressure .
The Commercial Series-Quantum Designed With Installers and Serviceability in Mind . Central to the Quantum Series (QSB, QSC, QSL) is the high-pressure common rail fuel system, providing better power-to-weight ratios, cleaner starting, less . Crankshaft power1 261 kW, 355 mhp 361 kW, 490 mhp298 kW, 405 mhp 433 kW, 590 mhp Crankshaft power2 .
MHP AMC Series Warranty . This installation guide provides you with easy to follow illustrations and instructions to assemble your MHP Gas Barbecue Grill. . When you complete the mount assembly go to the approp
MILLER Syncrowave 350LX TIG Welder, 350-AMP @ 40% w/Miller Cooler MILLER Shopmaster TIG Welder, 300-AMP @ 50% w/Miller Cooler MILLER Dialarc HF TIG Welder, 250-AMP @ 40%, Miller Coolmatic 3 MILLER DX Portable TIG Welder (11) MILLER Dialarc 250 AC/DC Stick Welders, 225-AMP @ 30% (3) LINCOLN Idealarc 250 Stick
mhp Verlag GmbH Kreuzberger Ring 46 65205 iesbaden Tel. 49/6 11/5 05 93-32 Fax 49/6 11/5 05 93-79 E-Mail: anzeigenmhp-verlag.de Media-informationen
(10) Late Model Miller and Lincoln Tig Welders; (2) Lincoln Precision Tig 375, (2) Miller Dynasty 350’s, (2) Miller Syncrowave 350LX’s, Miller Dynasty 300DX, Miller Syncrowave 250, (2) Miller Dynasty 200’s SEE PHOTO (8) Miller Spectrum 2050 Plasma Cutters SEE PHOTO Large Quantity of W
SMB_Dual Port, SMB_Cable assembly, Waterproof Cap RF Connector 1.6/5.6 Series,1.0/2.3 Series, 7/16 Series SMA Series, SMB Series, SMC Series, BT43 Series FME Series, MCX Series, MMCX Series, N Series TNC Series, UHF Series, MINI UHF Series SSMB Series, F Series, SMP Series, Reverse Polarity
350 Amp Miller Millermatic 350P Pulsed Mig Welder 300 Amp Miller Millermatic 300 Mig Welder (13) 250 Amp Miller Millermatic 252 Mig Welders (6) 250 Amp Miller Millermatic 251 Mig Welders (3) 250 Amp Miller Millermatic 250 Mig Welders 250 Amp Miller Millermatic 250X Mig Welder (4) Mi
LITERARY(THEORY(An(introduction((!! ClassReader! Spring2014!! Prof.DavidMiralles,PH.D.! University!of!Oregon!! Universidad!Autónoma!de!Querétaro!
