Para-maxx, Hydra-maxx & Scari-maxx Spare Parts
PARA-MAXX, HYDRA-MAXX & SCARI-MAXX SPARE PARTS INCLUDING COMMON PARTS & OPTIONAL EQUIPMENT Covering the 9m, 12m, 15m & 18m Models GPN224616 GPN 216595 REVISION - REVISION C 02/17 10/09 COPYRIGHT Neither this manual or part thereof may be reproduced or published without the prior permission of AF Gason Pty Ltd
Contents Contents Ordering Parts 1 Common Parts 3 9m Base Parts 30 12m Base Parts 36 15m Base Parts 46 18m Base Parts 52 Hydraulic Circuits 66
Ordering Parts The following information must be supplied to your local dealer to facilitate fast and accurate processing of a replacement parts order: Gason part number and description (as given in this manual) Quantity Machine model and serial number For your convenience record the following information below: Dealer Name: Dealer Address: Dealer Telephone Number: Subject to any applicable Federal, State or Territory laws or ordinances, which may apply from time to time, A. F. Gason Pty. Ltd. reserves the right to make changes in design and specifications without notice or obligation and to change or discontinue models at any time without incurring any liability to any Purchaser thereof. Machine Model No: Date Machine Purchased: Serial No.: Left and right hand: All references in this manual are determined by facing the direction of travel. For warranty provisions please consult your Installation and Warranty Registration document. While every effort has been made to ensure the accuracy of the information in this manual, A. F. Gason Pty. Ltd. reserves the right to delete, change or add information without notice. . 1
BLANK PAGE 2
Common Parts SECTION A COMMON PARTS 3
Common Parts - Scari-Maxx Upper Tine Assembly GPN: 210618 4
Common Parts - Scari-Maxx ITEM GPN DESCRIPTION QTY. ITEM GPN QTY. 902900 DESCRIPTION Tine Tower Cover Plate (Incl. h/ware) – Suits 400Ibf Tower. (Optional) Nut M20 1 210627 Spring Tower – 400Ibf 1 21 223488 2 211703 Pivot Bush - Secondary 1 22 3 917309 Screw Set M8 x 25 1 4 211702 Pivot Pin Assy. – Secondary 1 23 917806 Set Screw M20 x 50 W/Chamfer 2 24 913713 Bolt M20 x 65 GR8.8 4 5 208369 Cone Self Aligning 1* 25 210617 Pivot Bush - Outer 2 6 201538 Bearing Thrust 1* 26 208689 Shock Absorber Pad Assy. 1 7 907410 Washer Flat ¾” x 2” x 9g 1* 27 904905 Nut Nyloc M24 CL8 1 8 913715 Bolt M20 x 280 1* 28 903603 Nut Nyloc ½” UNF 2 9 211940 Spring Comp. – 400lbf (Nom.) Breakout 1 29 913803 Bolt M24 x 165 GR8.8 1 10 207158 Spring Retainer – Suit 400Ibf 1 30 906602 Washer Flat Structural ½” 2 11 903302 Nut Nyloc M8 1 31 210619 Tine - Sub Assembly 400lb # REF.# 12 211890 Pivot Bracket 1 13 207167 Lynch Pin Ø 4.5 1 14 207270 Pin Ø 16 x 56 1 15 8001380 Grease Nipple 1/8” NPT 1 16 210616 Pivot Bush - Inner 1 17 907405 Washer Structural M24 1 18 903931 Nut Nyloc M20 4 19 907416 Washer Structural M20 4 20 208645 Toolbar Clamp 1 REF 2 # Note: Item 31 includes all, except items 5 to 8, 18, 19, 20 & 24. 5
Common Parts - Hydra-Maxx Upper Tine Assembly GPN: 218720 6
Common Parts - Hydra-Maxx DESCRIPTION QTY. ITEM GPN 218721 Tine Sub Assy Hydraulic * REF.* 23 220481 Pivot Bracket – Machined 1 2 207167 Lynch Pin Ø4.5mm 1 24 210617 Pivot Bush - Outer 2 3 207270 Pin Clevis Ø16 x 56mm 1 25 - 4 210616 Pivot Bush - Inner 1 26 - 5 212029 Pin Cylinder Rod 1 27 - 6 212686 Cylinder HYD 2" Assembly 1 28 208645 Clamp Cast 4 Hole 1 7 212030 Cylinder HYD 2" x 115mm 1 29 907416 Washer Flat Structural M20 4 213139 Seal Kit REF. 30 913713 Bolt M20x65 GR8.8 Hex 4 8 212026 Bush 1 31 903931 Nut Nyloc M20 CL8 4 9 212027 Bush Cylinder Rod 1 10 216372 Pivot Pin - Cylinder Base 1 11 216373 Retaining Plate 1 12 218722 Tower Hydraulic Tine 1 13 8001380 Nipple Grease 1/8" NPT 1 14 902900 Nut M20 x 2.5 Hex CL8 2 15 903302 Nut Nyloc M8 CL8 1 16 904905 Nut Nyloc M24 CL8 1 17 907405 Washer M24 Structural 1 18 909004 Washer Spring M8 1 19 913803 Bolt M24x165 Hex GR8.8 1 20 917308 2 21 917806 Screw Set M8 x 20 x1.25 Screw Set M20 x 50 GR8.8 (with Chamfer) 22 220482 Pivot Bracket Assembly 1 ITEM GPN 1 DESCRIPTION QTY. * NOTE: Item 1 includes all, except items 28 -31 2 7
Common Parts - Para-Maxx Para-Maxx Row Unit GPN: 224640 8
Common Parts - Para-Maxx ITEM GPN DESCRIPTION QTY. 1 208645 Clamp Cast 4 Hole Suit 1 2 216927 Spacer S/S 25 x 12 x 8 1 3 223807 Pin Drawbar 1" x 8-1/4" GR8 1 4 224641 Row Unit - Base Parts 1 5 226837 Axle Assy Std - Integral Hub 1 6 229436 Nut M12 Stepped 1 7 903931 Nut Nyloc M20 Cl8 As1285 4 8 906901 Washer Flat 1" x 1-7/8" x 14g Z/P 1 9 907416 Washer Flat Structural M20 Gal 4 10 908604 Washer Spring 1/2 x 5/32 x 5/32 ZP 1 11 913626 Bolt M12x70 GR8.8 1 12 913703 Bolt M20x75 GR8.8 4 9
Common Parts - Para-Maxx Row Unit - Base Parts GPN: 224641 10
Common Parts - Para-Maxx ITEM GPN DESCRIPTION QTY. 19 225611 Press Wheel Arm Assembly 1 1 207167 Pin Lynch 4.5 DIA 1 ITEM 2 207270 Pin Clevis Ø16 x 56mm Long 1 20 225733 Nipple. 9/16UNO x 3/4 JICM 45deg QTY. 1 3 209173 Nipple 9/16UNO x ¾ JICM 1 21 228176 Scraper R/H 1 4 216837 Extension Spring - P/Wheel 1 22 228177 Scraper L/H 1 5 222497 Coulter Assembly 1 23 812588 Washer M16 Structural 2 6 222522 Cylinder Assembly 1 ½" 2 24 904600 Nut Nyloc M12 Cl10 11 - 223697 Seal Kit (Suits 222522) REF. 25 906602 Washer Flat Structural ½" 8 - 207186 Bush DU-1" DIA x 1" LG (2/Cyl.) REF. 26 906902 Washer Flat 1" x 2-1/8" x 7g 1 7 222535 Washer Recessed 1" 3 27 907503 Washer Flat M12 x 24 x 1.6 9 8 222536 Washer Recessed 1-¼" 1 28 908604 Washer Spring 1/2 x 5/32 x 5/32 6 9 222543 PIN Ø1" x 264mm 2 29 908702 Washer Spring 5/8" x 3/16" x 3/16" 2 10 222553 PIN Ø1-¼" x 214mm 1 30 913608 Bolt M12 x 30 GR8.8 6 11 222557 PIN Ø1" x 69mm 4 31 913612 Bolt M12 x 40 GR8.8 11 12 223807 Pin Drawbar 1" x 8-1/4" 2 32 917705 Screw Set M16 x 40 GR8.8 2 13 224643 Mount Upper Assembly 1 14 224644 Arm Upper Assembly 1 15 224647 Coulter Arm 1 15.1 222484 16 224649 16.1 222521 17 225410 Arm Lower 2 18 225413 Pin Ø1" X 171mm 2 Bush DU-1" DIA x 1-1/2" LG (10 PLC’S) Tool Holder Assembly Bush DU-1-1/4" DIA x 1-1/4" LG (2 PLC’S) GPN DESCRIPTION REF. 1 REF. 11
Common Parts - Para-Maxx Coulter Assembly GPN: 222497 ITEM GPN DESCRIPTION QTY. 1 222499 Coulter Drum 2 2 222502 Coulter Axle 1 3 222498 Coulter 18" x 4mm 1 4 226148 Nut Nyloc 7/16" UNF 5 5 906504 Washer Flat 7/16" x 22.5 x 2 5 12
Common Parts - Para-Maxx Coulter Axle GPN: 222502 ITEM GPN DESCRIPTION QTY. 1 226147 Stud Wheel 7/16 UNF 5 2 227748 Hub - Cast & Machined 1 3 222506 Axle 1 4 228046 Locking Spacer 30mm 1 5 222508 Seal Marine 1-½" 2 6 222510 Lock Washer M30 1 7 8 222511 222512 Lock Ring M30 Bearing Set 1 2 13
Common Parts - Para-Maxx Axle Assy - Integral Hub GPN: - 226837 ITEM GPN DESCRIPTION QTY. 1 2 226836 222508 Arm Weldment Seal – Marine type, pre 2014. 1 1* 231381 Seal – Oil type, post 2014 will fit old design 1* 3 4 5 214820 223820 214819 Bearing Cone Inner Hub Assembly 15” Integral Bearing Cone Outer 1* 1* 1* 6 907408 Washer Flat 21 x 37 x 1.6 1 7 8 934801 214818 Nut Slotted ¾” UNF Cap Dust A/B Type L 1 1* 9 922328 Screw Cap M4 x 10 2* 10 227133 Retainer - Grease Cap 2* 11 12 930100 917412 Pin Split 5/32 x 1-1/2" Z/P Screw Set M10 x 20 GR8.8 1 3* 13 902404 Lock Nut - M10 3* 14 227130 Hub Integral 15” 1* * NOTE: Item 14 includes items 2, 3, 4, 5, 8, 9, 10, 12, & 13. 14
Common - Para-Maxx Gauge Kit - 223242 ITEM GPN DESCRIPTION QTY. 1 216082 Gauge Pressure 0-1500psi (Coulter) 1 2 223239 Gauge Pressure 0-3625psi (Tine) 1 3 223241 Bracket 1 4 812204 U Bolt M16 GR8.8 *(Suit 100 x 100 SHS) 1 5 903930 Nut Nyloc M16 CL8 2 6 208177 Screw Set M5 x 15 POZI 6 7 8 9 10 11 12 13 903200 228632 223277 223240 222312 903406 217564 6 2 2 2 2 4 2 14 225970 Nut Nyloc M5 CL8 Decal Gauge Adaptor ½”G Hose 3/8” SAE R2 1200mm U BOLT M10 *(Suit 75 x 75 SHS) Nut Nyloc M10 CL8 *(Suit 75 x 75 SHS) Tee **For In Circuit Fitment (Not Shown) Nipple **For Direct Accumulator Fitment (Not Shown) 2 * U Bolt Item 4 & 11 will vary depending on where kit is mounted. **Will vary depending on circuit fitment 15
COMMON PARTS SOWING BOOT – SECONDARY RUBBER GPN: - 229363 ITEM GPN DESCRIPTION QTY. 1 217260 Sowing Boot - Dual Rubber 1 2 217263 903302 Tail (Included in 217260) Nut Nyloc M8 CL8 1 2 3 917309 Screw Set M8 x 25 2 SOWING BOOT – SECONDARY STEEL ITEM GPN DESCRIPTION QTY. 1 217503 Shank 52.5 Foot (Grey) REF. 2 208906 Shank 47 Foot (Blue) REF. 3 211909 Sowing Boot Scar/Cult 37mm REF. 3.1 209644 Clamp Sowing Boot 1 3.2 917311 Screw Set M8 x 40 1 3.3 903302 Nut Nyloc M8 CL8 1 ITEM GPN DESCRIPTION QTY. 1 225735 Sowing Boot - Secondary Steel 1 2 3 903302 917309 Nut Nyloc M8 CL8 Screw Set M8 x 25 2 2 4 8001368 Washer Flat 8x17x1.6mm Z/P 2 16
COMMON PARTS Shank Assy - Male Adapt Spear Shank Assy - Female Adapt, 12mm GPN: 228185 Knife ITEM GPN 1 228181 DESCRIPTION Shank-16mm With Boot GPN: 228376 QTY. Male ITEM GPN 1 214499 Shank Adapt 2 228377 Point-Hard Metals 3 903205 4 922329 1 2 222568 Point Para-Maxx 1 3 228044 Pin Roll 1/4 x 1-1/4 1 4 228045 Pin Roll 5/32" x 1-1/4" 1 DESCRIPTION Assembly QTY. FM Nut Whiz Lock Flange M5 CL10 Screw Cap M5 x 16 SOC HD GR12.9 1 1 1 1 Spare Parts Note: Weld-on adaptor GPN 219253. Shank Assy – Gason Knife GPN: 224619 ITEM GPN 1 224620 2 3 4 5 6 7 223827 223828 216484 216485 216509 216510 DESCRIPTION Shank Knife Point Painted Black Point Knife Sowing Boot Roll Pin Ø10 x 50 Roll Pin Ø6 x 50 Roll Pin Ø10 x 40 Roll Pin Ø6 x 40 QTY. - 1 1 1 2 2 3 3 17
COMMON PARTS Double Disc Opener (DDO) – Para-Maxx only. L/H GPN: 228357 - R/H GPN: 228358 ITEM GPN 1 2 3 4 5 6 223806 223773 223779 223780 223782 223793 223794 223795 223796 223802 223803 228360 228359 903605 913626 228788 917616 7 8 9 10 11 12 13 14 DESCRIPTION Roll Pin Ø12 x 40 Single Bevel Disc 18" x 6mm Guard Hub Assembly DDO Left Hub Assembly DDO Right Scraper Assembly L/H LHL-shown Scraper Assembly L/H RHL-n/s. Scraper Assembly R/H LHL-shown Scraper Assembly R/H RHL-n/s Shim DDO 1.2mm Shim DDO 2mm Shank Assembly DDO L/H-shown Shank Assembly DDO R/H-n/s Nut Nyloc M12 CL8 Bolt M12 x 70 x 1.75P GR8.8 Sowing Boot DDO Screw Set M12 x 35 CSK QTY. 2 2 1 1 1 1 1* 1 1* 4 4 1 1* 12 2 1 10 * NOTE: L/H (Left Hand) shown. i.e. left hand disc leading. Right Hand assembled opposite with alternate parts at Items 6, 7 & 10. Disc lead will alternate. i.e. Item 2 will move from the rear to the front. 18
COMMON PARTS MUD SCRAPER – Para-Maxx only. GPN: 216960 ITEM GPN 1 2 3 4 917412 909005 223341 223392 223393 917405 903406 6 7 DESCRIPTION Screw Set M10 x 20 GR8.8 Washer Spring M10 x 2.35 x 2.40 Mud Scraper Arm L/H (Shown) Arm R/H (Not Shown) Screw Set M10 x 35 GR8.8 Nut Nyloc M10 CL8 QTY. 2 2 1 1 2 2 19
COMMON PARTS Castor Group R/H - GPN: 224572 (shown) L/H - GPN: 224571 (opposite) ITEM GPN DESCRIPTION QTY. 1 - 217843 Wheel Assembly 400/60-22.5 R/H REF. 217844 Wheel Assembly 400/60-22.5 L/H REF. 1.1 210926 Wheel 11.75 X 22.5 Ref. 1.2 211138 Valve Stem - Short Ref. 1.3 217845 Tyre 400/60 -22.5 18ply (BKT648) Ref. 2 222886 PIN Ø38.1 x 372mm 2 3 224551 Castor Frame R/H 1 - 224550 Castor Frame L/H REF. 4 224558 Linkage Assembly Lower Front 4.1 222661 Bush Ø47.7 x 38.4 x 40 REF. 1 4.2 210775 Grease Nipple M6 Straight REF. 4.3 209338 Grease Nipple M6 90deg REF. 4.4 231809 Adaptor – M6 Grease Nipple REF. 4.5 902201 Nut M6 Hex Z/P REF. 5 224560 Linkage Assembly Upper Front 1 5.1 214951 Pivot Bush-Hydraulic Cylinder REF. 5.2 222661 Bush Ø47.7 x 38.4 x 40 REF. 5.3 210775 Grease Nipple M6 Straight REF. 6 224569 Bracket Castor Boss Assembly 6.1 225449 Bush Du-80 Dia x 60mm LG 6.2 8001380 Nipple Grease1/8” 1 7 225416 Washer Top 1 8 225448 Washer Thrust 115 x 80 x 8.5mm 1 9 903930 Nut Nyloc M16 CL8 2 10 904905 Nut Nyloc M24 CL8 1 11 913730 Bolt M16 x 85 GR8.8 2 1 REF. 20
COMMON PARTS Rear Group R/H - GPN: 233058 (shown) L/H - GPN: 233057 (opposite) 21
COMMON PARTS ITEM GPN 1 1.1 1.2 1.3 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 3 3.1 3.2 4 5 6 7 8 9 10 11 12 - 217844 217843 210926 211138 217845 224556 214951 211703 222661 210775 231809 902201 209338 224554 210775 222661 224578 222886 913730 903930 913713 913806 903931 906801 233060 233059 DESCRIPTION Wheel Assembly 400/60-22.5L/H Wheel Assembly 400/60-22.5R/H Wheel 11.75 x 22.5 Valve Stem - Short Tyre 400/60 -22.5 18ply (BKT648) Linkage Assembly Lower Back Bush Pivot Bush Bush Ø47.7 x 38.4 x 40 Grease Nipple M6 Straight Adaptor – M6 Grease Nipple Nut M6 Hex Z/P Grease Nipple M6 90deg Linkage Assembly Upper Back Grease Nipple M6 Straight Bush Ø47.7 x 38.4 x 40 Frame Rear Pin Dia 38.1 x 319mm Bolt M16 x 85 Nut Nyloc M16 CL8 Bolt M20 x 65 GR8.8 Bolt M20 x 85 GR8.8 Nut Nyloc M20 Washer Flat ¾” x 1- ¾ ” x 10G Frame Assembly Adjustable R/H (shown) Frame Assembly Adjustable L/H ITEM GPN 12.1 12.2 12.3 12.4 12.5 12.6 12.7 233063 233061 233064 233062 917609 902600 903931 907416 913719 DESCRIPTION QTY. QTY. Ref. Ref. Ref. Ref. Ref. 1 Ref. Ref. Ref. Ref. Ref. Ref. Ref. 1 Ref. Ref. 1 4 4 4 8 2 10 10 1 Ref. Frame Rear Wheel Upper R/H Frame Rear Wheel Upper L/H Frame Rear Wheel Lower R/H Frame Rear Wheel Lower L/H Set Screw M12 x 80 x 1.75 Nut M12 Nut Nyloc M20 Washer Flat Structural M20 Bolt M20 X 70 Ref. Ref. Ref. Ref. Ref. Ref. Ref. Ref. Ref. 22
COMMON PARTS Axle Assy Sq 70mm Stub. GPN: 222467 ITEM GPN DESCRIPTION QTY. 1 230092 Hub Fad 70h-8 1 2 230091 Stub Axle-Square 70mm 1 3 210070 Inner Bearing 1 4 220753 Bearing Outer 32210 1 5 204617 Seal Bearing - Suits 1810 1 6 204623 Seal Ring 678013-Suit 1 7 215312 Nut Slotted M39x2 1 8 215313 Pin - Split M6 x 60 1 9 204621 Stud Wheel M18x1.5x49mm 8 10 204622 Wheel Nut M18 x 1.5 HEX 8 12 204620 Cup Dust 90mm 1 Note: Common on all except 18m Rear Centre Frame. Hub assembly GPN 230090 includes all above items except for item 2 axle. 23
COMMON PARTS Connector Bar Assembly GPN: 224552 ITEM GPN DESCRIPTION QTY. 1 902911 NUT M48 HEX 2 2 224553 NUT LOCKING 1 3 224575 CLEVIS RIGHT HAND 1 4 224581 PIN CLEVIS 2 5 8001247 LYNCH PIN 4 6 224576 ROD CONNECTOR 1 7 923211 SCREW GRUB M8x12KN CUP PT 2 8 224577 CLEVIS LEFT HAND 1 24
COMMON PARTS Kit Tine Stub – Front Row Kit Tine Stub - L Shape GPN: 228297 GPN: 227400 ITEM GPN 1 228298 2 DESCRIPTION QTY. ITEM GPN DESCRIPTION QTY. Stub - Tine Front Row 1 1 227401 Stub - Tine Rear L 1 228299 Plate 1 2 218715 U Bolt M20 Suits 100 x 100 3 3 913741 Bolt M20 x 130 GR8.8 Hex 2 3 903931 Nut Nyloc M20 CL8 6 4 218715 U Bolt M20 Suits 100 x 100 1 4 907416 Structural Washer M20 6 5 903931 Nut Nyloc M20 CL8 4 6 907416 Washer Flat Structural M20 4 25
COMMON PARTS Kit Tine Stub – Front Row Kit Tine Stub - U Shape GPN: 218644 GPN: 229957 DESCRIPTION ITEM GPN QTY. DESCRIPTION QTY. ITEM GPN 1 218071 Stub Tine – Rear L 1 1 229956 Stub - Tine Front Row 1 2 218715 U Bolt M20 Suits 100 x 100 2 2 218715 U Bolt M20 Suits 100 x 100 4 3 907416 Washer Flat Structural M20 4 3 907416 Washer Flat Structural M20 8 4 903931 Nut Nyloc M20 CL8 4 4 903931 Nut Nyloc M20 CL8 8 26
COMMON PARTS Decals Listing ITEM GPN 2 221949 3 8001418 4 5 DESCRIPTION QTY. 8 207472 Decal Wheel Nut / Tyre Press. Tag Serial No (Rear L/H Centre – not shown) Decal Danger - Keep Clear 223281 Decal Para-Maxx Pull *2 227885 Decal Scari-Maxx Pull *2 227887 Decal Hydra-Maxx Pull *2 6 229842 Decal Lift 4 7 227889 Decal Para-Maxx 100 Wing *2 227886 Decal Scari-Maxx 100 Wing *2 227888 Decal Hydra-Maxx 100 Wing Decal Warning Cylinder D/Stop (may vary between models) *2 8 214853 1 4 1 * NOTE: Variation of Wing & Pull decals between Par-Maxx, ScariMaxx & Hydra-Maxx. Refer pull drawings for remaining decals. 27
COMMON PARTS Tool box ITEM GPN DESCRIPTION QTY. 1 202671 Tool Box Suit 102mm RHS 1 2 224589 Spanner-Suit M48 Nut 1 3 208656 Paint & Can A/D Blue 1L 1 4 206714 Paint & Can A/D GREY 1L 1 5 208612 Spanner-Suit M36/M24 Nut 1 6 213771 Depth Stop Kit 210mm long - PTE *REF 7 229671 Depth Stop Kit 200mm long - Nordon *REF 8 229339 C Spanner - Coulter Bearings *1 * NOTE: Items 6 & 7 Depth Stop Kits will vary between cylinder brands (hardware not shown). Qty will vary between models. Item 8 Para-Maxx Only. 28
COMMON PARTS 29
9M 9m Base Parts SECTION B 9m BASE PARTS 30
9M 9m Base Frames GPN: 224603 (Ref Only) ITEM GPN 1 224541 2 3 4 5 226737 226739 224565 227309* DESCRIPTION QTY Centre Frame Assy 9&12m (See 12m Section) Left Wing Assy 9m Right Wing Assy 9m Pull Assembly 9 & 12m (See 12m Section) Wing Extension Kit (250mm spacings only) 1 1 1 1 2 * NOTE: Wing Extension kit optional (not in 9m Base parts 224603) Extends 9m to 12m on 250mm spacing models only. For Pre March 2016 machines, use kit GPN 232361. 31
9M Left Hand Wing 9m GPN: 226737 32
9M ITEM GPN DESCRIPTION QTY. 1 207227 Eye Bolt M36 Level Adjust 1 2 207399 Pin drawbar 1-1/8 x 4-3/4" 2 3 208689 Shock Pad Assembly 2 4 210775 Grease Nipple M6 Straight 3 5 213641 6 214229 Cylinder Hydraulic 5.5"x12" Master PTE (depth stop plates not shown) Cylinder Eye-Long 7 222886 Pin Ø38.1 x 319mm 2 8 223130 Stand 2 9 224552 Connector Bar Assembly 1 10 224571 Castor Group Left 1 11 233057 Rear Group Left 1 12 226738 Wing Left Hand 9m 1 13 812238 Hyd. Cylinder 5.0” x 36” PTE 1 14 902902 Nut M36 Hex 1 15 903609 Nut Nyloc 1/2" UNF 4 16 903916 Nut Nyloc M36 CL8 1 17 903930 Nut Nyloc M16 CL8 2 18 906602 Washer Flat Structural 1/2"Gal 4 19 913730 Bolt M16 x 85 GR8.8 2 20 923402 Screw Grub 3/8UNCx1/2”lg 2 1 1 33
9M Right Hand Wing 9m REF. 226739 34
9M ITEM GPN DESCRIPTION QTY. 1 207227 Eye Bolt M36 Level Adjust 1 2 207399 Pin Drawbar 1-1/8 x 4-3/4" 2 3 208689 Shock Pad Assembly 2 4 210775 Grease Nipple M6 Straight 3 5 201240 Cylinder Hyd 4.5"x12" PTE 1 6 214229 Cylinder Eye-Long 1 7 222886 PIN Ø38.1x319mm 2 8 223130 Stand 2 9 224552 Connector Bar Assembly 1 10 224572 Castor Group Right 1 11 233058 Rear Group Right 1 12 224587 Depth Gauge Kit 1 13 226740 Wing Right Hand 9m 1 14 812238 Hyd. Cylinder 5.0” x 36” PTE 1 15 902902 Nut M36 Hex 1 16 903609 Nut Nyloc 1/2" UNF 4 17 903916 Nut Nyloc M36 CL8 1 18 903930 Nut Nyloc M16 CL8 2 19 906602 Washer Flat Structural 1/2"GAL 4 20 913730 Bolt M16 x 85 GR8.8 2 21 923402 Screw Grub 3/8UNC x 1/2 LG 2 35
12M 12m Base Parts SECTION C 12m BASE PARTS 36
12M 12m Base Frames GPN: 224605 & 224610 (Ref Only) ITEM GPN 1 2 3 4 224541 224544 224547 224565 DESCRIPTION Centre Frame Assembly 9m & 12m Left Wing Assembly 12m & 15m Right Wing Assembly 12m & 15m Pull Assembly 9m & 12m QTY 1 1 1 1 37
12M Centre Frame 9m & 12m GPN: 224541 38
12M ITEM GPN 1 201239 DESCRIPTION QTY 1 *REF . 2 2 207227 Cylinder Hydraulic 4.75" x 12" PTE Cylinder Hydraulic 5"x12” Master Nordon (Para-Maxx post 2015 only) Eye Bolt M36 Level Adjust 3 207399 Pin Drawbar 1-1/8" x 4-3/4" 4 4 209732 Cylinder Hydraulic 5" x 12" PTE Cylinder Hydraulic5"x12” Master Nordon (Para-Maxx post 2015 only) 1 222651 222651 *REF. 5 222886 Pin Ø38.1 x 372mm 4 6 222957 Pin Wing Pivot 6 7 223130 Stand 4 8 224543 Centre Frame 9m & 12m 1 9 224552 Connector Bar Assembly 2 10 224571 Castor Group Left 1 11 224572 Castor Group Right 1 12 233058 Rear Group Right 1 13 233057 Rear Group Left 1 14 231663 Drawbar Pin ¾”Dia X 3-3/4” (wing lock) 4 15 812310 Roller Wing Lift Mast 2 16 812311 Bush Wing Lift Mast 2 17 812704 Roller Wing Lift Mast 2 18 902902 Nut M36 Hex 2 19 903916 Nut Nyloc M36 CL8 2 20 903930 Nut Nyloc M16 CL8 8 ITEM GPN 21 904905 Nut Nyloc M24 CL8 4 22 913730 Bolt M16 x 85 GR8.8 8 23 913811 4 24 209914 Bolt M24 x 170 GR10.9 Hex Transport Lock – 1.75” dia. max rod. All models except 12m Para-Maxx. Transport Lock – 57mm dia. max rod. 12m Para-Maxx only. 231912 DESCRIPTION QTY 2 2 *Note: Items 1 & 4 Master cylinders on Para-Maxx only - Depth Stops not shown. 39
12M Left Hand Wing 12m & 15m GPN: 224544 40
12M ITEM GPN 1 205566 DESCRIPTION Cylinder Hydraulic 5.5" x 36" PTE QTY. *1 2 207227 Cylinder hydraulic 6” x 36” Nordon (15m Para-Maxx only) Eye Bolt M36 Level Adjust 3 207399 Pin Drawbar 1-1/8" x 4-3/4" 2 4 208689 Shock Pad Assembly 2 5 210775 3 6 213641 229701 *1 1 7 213771 Grease Nipple M6 Straight Cylinder Hydraulic 5.5" x 12" PTE Master Cylinder Hydraulic 4.5" x 12” Nordon (Para-Maxx post 2015 only) Depth Stop Assembly (PTE Only) 8 214229 Cylinder Eye Long *1 9 222886 PIN Ø38.1 x 372mm 2 10 223130 Stand 2 11 224546 Wing Left Hand 1 12 224552 Connector Bar Assembly 1 13 224571 Castor Group Left 1 14 233057 Rear Group Left 1 15 230559 Wing Extension Kit (15m Only) 16 902902 Nut M36 Hex 1 17 903609 Nut ½” UNF Hex ZP 4 18 903916 Nut Nyloc M36 Hex 1 19 903930 Nut Nyloc M16 CL8 2 20 906602 Washer Structural ½” 4 21 913730 Bolt M16 X 85 GR8.8 2 22 923402 Screw Grub 3/8UNC x 1/2Long *2 222652 *Reference only. *1 *1 REF. REF. 41
12M Right Hand Wing 12m & 15m GPN: 224547 42
12M ITEM GPN 1 201240 Cylinder Hydraulic 4.5" x 12" PTE 222652 Cylinder Hydraulic 4.5” x 12” Nordon (Para-Maxx post 2015) 2 205566 DESCRIPTION QTY. 1 REF. 3 207227 Cylinder Hydraulic 5.5" x 36" PTE Cylinder Hydraulic 6” x 36” Nordon (15m Para-Maxx only) Eye Bolt M36 Level Adjust 4 207399 Pin Drawbar 1-1/8" x 4-3/4" 2 5 208689 Shock Pad Assembly 2 6 210775 Grease Nipple M6 Straight 3 7 214229 Cylinder Eye Long *1 8 222886 PIN Ø38.1 x 372mm 2 9 223130 Stand 2 10 224549 Wing Right Hand 1 11 224552 Connector Bar Assembly 1 12 224572 Castor Group Right 1 13 233058 Rear Group Right 1 14 224587 Depth Gauge Kit 1 15 230559 Wing Extension Kit (15m Only) 16 902902 Nut M36 Hex 1 17 903609 Nut Nyloc ½” UNF Hex ZP 4 18 903916 Nut Nyloc M36 CL8 1 19 903930 Nut Nyloc M16 CL8 2 20 906602 Washer Structural ½” 4 21 913730 Bolt M16 x 85 GR8.8 2 22 923402 Screw Grub 3/8UNC x 1/2Long *2 229701 *Reference only. *1 *1 1 REF. 43
12M Pull Assembly 9m & 12m GPN: 224565 44
12M DESCRIPTION ITEM GPN QTY. 1 202671 Tool Box Suit 102mm RHS 1 2 206955 Decal - Warning Safety 1 3 209348 Decal - Transport Warning 1 4 216072 Decal - Do Not Ride on Machine 1 5 216338 Safety Chain - 18 Tonne Tow 1 6 217111 Spring Hose Stand 2 7 217907 Decal – Hydraulic Caution 1 8 223222 Pin Ø50 Pull 2 9 224567 Pull Weldment 1 10 224585 Jack Assembly 1.5t Drop leg 1 11 913658 Bolt M16 x 100 GR8.8 Hex 2 12 917705 Screw Set M16 x 40 x 2.0 4 13 903930 Nut Nyloc M16 CL8 6 14 917602 Screw Set M12 x 30 GR8.8 2 15 908604 Washer Spring 1/2 x 5/32 x 5/32 2 16 217112 Washer 2 17 212530 Bracket - Hyd. Hose Tip 2 18 909005 Washer Spring M10 ZP 4 19 917412 Screw Set M10 x 20 GR8.8 4 20 212808 Dustcap ½” Male (Not Shown) 8 45
15M 15m Base Parts SECTION D 15m BASE PARTS 46
15M 15m Base Frames GPN: 224607 & 224609 (Ref Only) ITEM GPN 1 225881 2 224544 3 224547 4 225860 DESCRIPTION Centre Frame Assembly 15m Left Wing Assembly 12m & 15m (See 12m Section) Right Wing Assembly 12m & 15m (See 12m Section) Pull Assembly - 15m QTY 1 1 1 1 47
15M Centre Frame 15m GPN: 225881 48
15M ITEM GPN 1 201239 222651 3 207227 4 207399 5 209732 DESCRIPTION Cylinder Hydraulic 4.75" x 12" PTE. All except for Para-Maxx post 2014. Cylinder Hydraulic 5" x 12” Master Nordon (Para-Maxx post 2014 only.) Eye Bolt M36 Level Adjust QTY. ITEM GPN 1 23 904905 Nut Nyloc M24 CL8 4 24 908604 Washer Spring ½” 4 25 913730 Bolt M16 X 85 GR8.8 Hex 8 26 913811 Bolt M24 X 170 GR10.9 Hex 2 REF. 2 7 222886 Pin Drawbar 1-1/8" x 4-3/4" Cylinder Hydraulic 5" x 12" PTE. All except for Para-Maxx post 2014. Cylinder Hydraulic 5"x 12” Master Nordon (Para-Maxx post 2014 only.) Pin Ø38.1 x 372mm 8 222957 Pin Wing Pivot 6 9 223130 Stand 4 10 223229 Pin Wing lift 2 11 223231 Washer Wing lift 4 12 224552 Connector Bar Assembly 2 13 224571 Castor Group Left 1 14 224572 Castor Group Right 1 15 233058 Rear Group Right 1 16 233057 Rear Group Left 1 17 225882 Centre Frame 15m 1 18 812310 Roller Wing Lift Mast 2 19 812311 Bush Wing Lift Mast 2 20 902902 Nut M36 Hex 2 21 903916 Nut Nyloc M36 CL8 2 22 903930 Nut Nyloc M16 CL8 8 222651 4 DESCRIPTION QTY. 27 917608 Screw set M12 x 35 x 1.75 4 1 28 231663 4 REF. 29 209914 Drawbar Pin ¾”Dia X 3-3/4” (wing lock) Transport Lock – 1.75” dia. max rod. All models except Para-Maxx. Transport Lock – 57mm dia. max rod. Para-Maxx only. 4 231912 2 2 *Note: Items 1 & 5 Master cylinders on Para-Maxx only - Depth Stops not shown. 49
15M Pull Assembly - 15m GPN: 225860 50
15M ITEM GPN DESCRIPTION QTY. 1 202671 Tool Box Suit 102mm RHS 1 2 206955 Decal - Warning Safety 1 3 209348 Decal - Transport Warning 1 4 212530 Bracket Hyd. Hose Tip 2 5 216072 Decal – Warning Do Not Ride 1 6 216338 Safety Chain - 18 Tonne Tow 1 7 217111 Spring Hose Stand 2 8 217112 Washer 2 9 217907 Decal – Hydraulic Caution 1 10 223222 Pin Ø50 Pull 2 11 224585 Jack Assembly – 1.5t Drop leg 1 12 225861 Pull - Weldment Wide Single Fold 1 13 812204 U Bolt M16 Gr8.8 2 14 903930 Nut Nyloc M16 CL8 6 15 906404 Washer Flat 3/8” x ¾” 4 16 908604 Washer Spring 1/2 x 5/32 x 5/32 2 17 909005 Washer Spring ½ x 5/32 x 5/32 4 18 913658 Bolt M16 x 100 GR8.8 2 19 917404 Screw Set M10 x 30 GR8.8 4 20 917602 Screw Set M12 x 30 GR8.8 2 21 212808 Dustcap ½” Male (Not Shown) 8 51
18M 18m Base Parts SECTION E 18m BASE PARTS 52
18M 18m Base Frames GPN: 224608 ITEM GPN 1 2 3 4 5 6 225850 225852 225856 225863 225858 225854 DESCRIPTION Centre Frame Assembly 18m 18m Right Inner Wing Assembly 18m Right Outer Wing Assembly Pull Assembly - 15m 18m Outer Wing Assembly 18m Left Inner Wing Assembly QTY 1 1 1 1 1 1 53
18M Centre Frame 18m GPN: 225850 54
18M ITEM GPN DESCRIPTION QTY 1 207227 Eye Bolt M36 Level Adjust 2 2 207399 Pin Drawbar 1-1/8 x 4-3/4" 4 3 213781* Transport Lock - 55mm dia. max rod 2 4 222651 Cylinder 5" x 12" Nordon 2 5 222886 Pin Ø38.1x319mm 4 6 222957 Pin Wing Pivot 6 7 223130 Stand 4 8 225851 Centre frame 18m 1 9 225866 Castor Dual Assembly 2 10 225869 Rear Group Right (Phantom) 1 11 225870 Rear Group Left (Phantom) 1 12 229680 Cylinder 5.5" x 12" Master Nordon 2 13 231912* Transport Lock - 57mm dia. max rod 2 14 812310 Roller Wing Lift Mast 4 15 812311 Bush Wing Lift Mast 4 16 812704 Roller Wing Lift Mast 4 17 902902 Nut M36 Hex 2 18 903916 Nut Nyloc M36 2 19 903930 Nut Nyloc M16 CL8 10 20 904905 Nut Nyloc M24 CL8 8 21 913730 BOLT M16 x 85 GR8 10 22 913800 Bolt M24x160 Gr8.8 Hex Z/P 4 23 913811 Bolt M24x170 Gr10.9 Hex Z/P 4 *Note: Transport Locks are different between front & rear of machine. Refer items 3 & 13. Item 13 suits cylinders fitted with depth stop plates. 55
18M Inner Wing Frame 18m R/H - GPN: 225852 (shown) L/H - GPN: 225854 (opposite) Refer operator’s manual for permanent setting (Required as part of wing fold process) 56
18M ITEM GPN 1 207227 2 DESCRIPTION QTY ITEM GPN Eye Bolt M36 Level Adjust 1 19 903930 Nut Nyloc M16 Cl8 4 207399 Pin Drawbar 1-1/8 x 4-3/4" 2 20 913730 Bolt M16 x 85 Gr 8 4 3 210775 Grease Nipple M6 Straight 4 21 923402 Screw Grub 3/8UNC x 1/2 LG 6 4 214229 Cylinder Eye-Long 3 5 222652 Cylinder 4.5" x 12" Nordon 1 6 222886 Pin Ø38.1x319mm 2 7 222957 Pin Wing Pivot 2 8 223130 Stand 2 9 224552 Connector Bar Assembly 1 10 233058 Rear Castor Group RH (shown) 1 233057 Rear Castor Group LH (not shown) 11 224587 Depth Gauge Kit (RH Only) 1 12 225853 Inner Wing Right 18m (shown) 1 225855 Inner Wing Left 18m (not shown) 13 227400 Kit Tine Stub - L Shape 1 14 229671 Depth Stop Kit - 200mm long Nordon 1 15 229944 Castor Group RH offset 18m (shown) 1 229945 Castor Group LH offset 18m (not shown) 16 812238 Hyd. Cylinder 5” x 36” PTE 3 17 902902 Nut M36 Hex 1 18 903916 Nut Nyloc M36 1 DESCRIPTION QTY REF. REF. REF. 57
18M Outer Wing Frames 18m R/H - GPN: 225856 (shown) L/H - GPN: 225858 (opposite) 58
18M QTY ITEM GPN DESCRIPTION QTY Eye Bolt M36 Level Adjust 1 20 902902 Nut M36 Hex 1 208689 Shock Pad Assembly 2 21 903609 Nut Nyloc 1/2" UNF 4 3 210775 Grease Nipple M6 Straight 5 22 903916 Nut Nyloc M36 1 4 222653 Cylinder Hyd. 4.25" x 12” Nordon 1 23 903930 Nut Nyloc M16 Cl8 6 5 222886 Pin Ø38.1x319mm 2 24 904905 Nut Nyloc M24 Cl8 As1285 3 6 222957 Pin Wing Pivot 4 25 906602 Washer Flat Structural 1/2"Gal 4 7 224552 Connector Bar Assembly 1 26 913709 Bolt M20x100 Gr8.8 Hex Zp 1 8 224571 Castor Group Left (shown) 1 27 913730 Bolt M16 x 85 Gr 8 Zp 6 224572 Castor Group Right (not shown) REF. 28 913800 Bolt M24x160 Gr8.8 Hex Zp 2 233058 Rear Castor Group Right (shown) 1 29 913811 Bolt M24x170 Gr10.9 Hex Zp 1 233057 Rear Castor Group Left (not shown) 225857 Wing Right Outer 18m (shown) 225859 Wing Left Outer 18m (not shown) 11 225862 Wing Intermediate 18m 1 12 227400 Kit Tine Stub - L Shape 1 13 228397 Cylinder Hyd - 3" x 8" PTE 2 14 228790 Bracket - R/H Wing Support 1 15 229456 Shim - Shock Pad 16 231548 Kit - Safety Stand Bracket 1 17 812310 Roller Wing Lift Mast 2 18 812311 Bush Wing Lift Mast 2 19 812704 Roller Wing Lift Mast 1 ITEM GPN 1 207227 2 9 10 DESCRIPTION REF. 1 REF. A/R 59
18M Pull Assembly – 18m GPN: 225863 60
18M ITEM GPN DESCRIPTION QTY 1 202671 Tool Box 102 RHS 1 2 206955 Decal Warning – Safety 1 3 209348 Decal Transport Warning 1 4 216072 Decal – Do Not Ride 1 5 216338 Safety Chain – 18 Tonne Tow 1 6 217111 Spring Hose Stand 2 7 217112 Washer 2 8 217907 Decal Warning 1 9 223222 Pin Ø50 Pull 2 10 224585 Jack Assembly 1 11 225864 Pull – Weldment 18m 1 12 903930 Nut Nyloc M16 6 13 908604 Washer Spring ½ x 5/32 x 5/32 2 14 913658 Bolt M16 x 100 2 15 917602 Screw Set M12 x 30 2 16 917705 Screw Set M16 x 40 4 17 917404 Screw Set M10 x 30 4 18 909005 Washer Spring M10 4 19 906404 Washer Flat 3/8” 4 20 212530 Bracket Hyd Hose Tip 2 21 212808 Dustcap ½” Male (Not Shown) 8 61
18M CASTOR GROUP 18m OFFSET R/H - GPN: 229944 (shown) L/H - GPN: 229945 (opposite) ITEM GPN DESCRIPTION 1 224569 Bracket Castor Boss Assembly 1.1 225449 Bush Du-80 Dia x 60mm LG 1.2 8001380 2 217843 - 217844 Nipple Grease1/8” Wheel Assembly 400/60-22.5 R/H (shown) Wheel Assembly 400/60-22.5 L/H 3 224551 Castor Frame R/H (not shown) QTY. 1 REF. 1 REF. REF. 1 - 224550 Castor Frame L/H (shown) 4 229891 Linkage Assembly Offset - Lower Front REF. 4.2 222661 Bush Ø47.7 x 38.4 x 40 REF. 4.3 210775 Grease Nipple M6 Straight REF. 4.4 902201 Nut M6 Hex Z/P REF. 4.5 231809 Adaptor – M6 Grease Nipple REF. 4.6 209338 Grease Nipple M6 90deg REF. 5 2
Neither this manual or part thereof may be reproduced or published without the prior permission of AF Gason Pty Ltd PARA-MAXX, HYDRA-MAXX & SCARI-MAXX SPARE PARTS INCLUDING COMMON PARTS & OPTIONAL EQUIPMENT Covering the 9m, 12m, 15m & 18m Models GPN224616 REVISION C 02/17 GPN 216595 REVISION - 10/09
2 www.Hydra-Cell.com. Hydra-Cell Pumps for Chemical Processing. Hydra-Cell Standard Pumps, Hydra-Cell Metering Pumps, and Hydra-Cell T80 Series Pumps. Hydra-Cell positive displace-ment pumps are available in 16 pump models covering a wide range of flows and pressures. Eight (8) standard Hydra
PSI AP Physics 1 Name_ Multiple Choice 1. Two&sound&sources&S 1∧&S p;Hz&and250&Hz.&Whenwe& esult&is:& (A) great&&&&&(C)&The&same&&&&&
Argilla Almond&David Arrivederci&ragazzi Malle&L. Artemis&Fowl ColferD. Ascoltail&mio&cuore Pitzorno&B. ASSASSINATION Sgardoli&G. Auschwitzero&il&numero&220545 AveyD. di&mare Salgari&E. Avventurain&Egitto Pederiali&G. Avventure&di&storie AA.&VV. Baby&sitter&blues Murail&Marie]Aude Bambini&di&farina FineAnna
HyDra Waterstop HyDra Liquid Rubber HyDra FB Membrane 3080 HyDra FB Tape T120S Scale Adress: Hallsbergsterminalen 11-13 694 35 Hallsberg Sverige Kontakt: Tel: 010-585 21 00 E-post: info@hydratec.se Do not scale 04.11.2019 09:20:05 Detaljlösningar HyDra System Hissgrop eftermonterad Hissgrop förmonterat 1A 1B 2 Detalj platta/vägg .
The program, which was designed to push sales of Goodyear Aquatred tires, was targeted at sales associates and managers at 900 company-owned stores and service centers, which were divided into two equal groups of nearly identical performance. For every 12 tires they sold, one group received cash rewards and the other received
The room temperature where the MAXX 2 is located should be 68 F to 78 F (20 C to 25.6 C) with a relative humidity of 20% to 85%. Be sure to allow the equipment and materials to reach and remain at room temperature for 24 hours before printing. Using MAXX READY material The MAXX prints only on GERBER MAXX READY materials. Gerber specially .
College"Physics" Student"Solutions"Manual" Chapter"6" " 50" " 728 rev s 728 rpm 1 min 60 s 2 rad 1 rev 76.2 rad s 1 rev 2 rad , π ω π " 6.2 CENTRIPETAL ACCELERATION 18." Verify&that ntrifuge&is&about 0.50&km/s,∧&Earth&in&its& orbit is&about p;linear&speed&of&a .
NOTE: See page 1702.8 for a complete list of casing options by size. Section 1702 Page 1702.3 Issue E UNIVERSAL PRODUCT LINE: STAINLESS STEEL — JACKETED PUMPS 227A Series , 1227A Series , 4227A Series , 327A Series , 1327A Series , 4327A Series A Unit of IDEX Corporation Cedar Falls, IA 2020. CUTAWAY VIEW & PUMP FEATURES Multiple port sizes, types, and ratings are available .
