MAC Address Configuration Commands - FS
MAC Address Configuration Commands
Table of Contents Table of Contents Chapter 1 MAC Address Configuration Commands.1 1.1 MAC Address Configuration Commands.1 1.1.1 mac address-table static .1 1.1.2 mac address-table aging-time .1 1.1.3 show mac address-table .2 1.1.4 clear mac address-table .3 -I-
MAC Address Configuration Commands Chapter 1 MAC Address Configuration Commands 1.1 1.1.1 MAC Address Configuration Commands mac address-table static Syntax [no] mac address-table static mac-addr vlan vlan-id interface interface-id To add a static MAC address, run mac address-table static mac-addr vlan vlan-id interface interface-id. To cancel the static MAC address, run no mac address-table static mac-addr vlan vlan-id interface interface-id. Parameter Parameter Description mac-addr Means an MAC address. Value range: H.H.H vlan-id A VLAN that the MAC address belongs to Value range: 1-4094 interface-id Physical port that the MAC address belongs to Default value N/A Explanation This command is configured in global configuration mode. Example The following example shows how to bind MAC address 0004.5600.67ab to port G0/2 of VLAN1. Switch config# mac address-table static 0004.5600.67ab vlan 1 interface g0/2 1.1.2 mac address-table aging-time Syntax mac address-table aging-time [0 10-1000000] -1-
MAC Address Configuration Commands To configure the aging time of the MAC address table, run the previous command. Parameter Parameter Description 0 Means that the MAC address never ages. 10-1000000 Aging time of the MAC address whose unit is second Default value 300s. Explanation This command is configured in global configuration mode. Example The following example shows how to set the aging time of the MAC address to 100 seconds. Switch config# mac address-table aging-time 100 1.1.3 show mac address-table Syntax show mac address-table [dynamic [interface interface-id vlan vlan-id] static brief multicast interface interface-id vlan vlan-id H.H.H] To display the MAC address table of the switch, run show mac address-table {dynamic [interface interface-id vlan vlan-id] static brief multicast interface interface-id vlan vlan-id H.H.H]. Parameter Parameter Description dynamic Dynamically-learned MAC address table interface-id Name of an interface vlan-id VLAN ID static Static MAC address table brief Brief information about the MAC address multicast Multicast MAC address table Interface Port’s MAC address table Vlan Vlan mac address table Value range: 1-4094 -2-
MAC Address Configuration Commands H.H.H Specific address Default value N/A Explanation This command is used to display the MAC address table. Example The following example shows how to display all dynamic MAC address tables. Switch config#show mac address-table Mac Address Table (Total 2) ------------------------------------------ Vlan Mac Address ---- 1.1.4 ----------- Type ---- 1 0026.5a7c.fad3 1 0000.0000.0004 Ports ----DYNAMIC DYNAMIC g0/24 g0/24 clear mac address-table Syntax clear mac address-table dynamic [address mac-addr interface interface-id vlan vlan-id] To delete a dynamic MAC address, run the above-mentioned command: Parameter Parameter Description address mac-addr Means an MAC address. Value range: H.H.H interface-id Means a name of a L2 interface. vlan-id VLAN ID Value range: 1-4094 Default value N/A -3-
MAC Address Configuration Commands Remarks This command is used in EXEC mode. Example The following example shows how to clear all dynamically learned MAC addresses on interface g0/2. Switch# clear mac address-table dynamic interface g0/2 -4-
Chapter 1 MAC Address Configuration Commands 1.1 MAC Address Configuration Commands 1.1.1 mac address-table static Syntax [no] mac address-table static mac-addr vlan vlan-id interface interface-id To add a static MAC address, run mac address-table static mac-addr vlan vlan-id interface interface-id. To cancel the static MAC address, run no mac
Router(config)# mac access-list extended mac_layer Router(config-ext-macl)# deny 0000.4700.0001 0.0.0 0000.4700.0009 0.0.0 dsm Router(config-ext-macl)# permit any any Related Commands Command Description mac access-group in Applies MAC ACLs to Ethernet service instances. show mac-address-table Displays information about the MAC address table.
Provided by the Academic Center for Excellence 1 Spanish: Commands Updated February 20. Spanish: Commands . Formal Commands (Ud. and Uds.) Formal commands are used when talking in the Usted/Ustedes form of a verb. To create formal affirmative and negative commands, use the third person
Hence the devices with randomized MAC address will be identified regardless of the MAC address in use. Secure onboarding for BYOD devices is an additional option to work with unmanaged devices. . By enabling MAC address randomization, . Android implemented MAC randomization for Wi-Fi/5G/LTE connections with V10; the feature is enabled by .
Step 4. In the Remote Wireless Bridge’s MAC Address section, enter the MAC address of an access point to use as a bridge in the MAC 1 field. You can also configure additional access points to use as bridges in the MAC 2, MAC 3, and MAC 4 fields.
MATLAB Commands – 1 MATLAB Commands and Functions Dr. Brian Vick Mechanical Engineering Department Virginia Tech General Purpose Commands Operators and Special Characters / 3 Commands for Managing a Session / 3 Special Variables and Constants / 4 System and File Commands / 4
1.1 Commands for Managing Configuration Files Commands for managing configuration files are shown in the following: copy delete dir ip address ip route show configuration format more 1.1.1 copy To read files from the TFTP server to the switch, run copy. copy tftp :filename {flash :filename rom} [ip_addr]
Online Backup Client User Manual Mac OS 1. Product Information Product: Online Backup Client for Mac OS X Version: 4.1.7 1.1 System Requirements Operating System Mac OS X Leopard (10.5.0 and higher) (PPC is not supported, Intel only) Mac OS X Snow Leopard (10.6.0 and higher) Mac OS X Lion Mac OS X Mountain Lion Hardware Resources
An Introduction to Description Logic IV Relations to rst order logic Marco Cerami Palack y University in Olomouc Department of Computer Science Olomouc, Czech Republic Olomouc, November 6th 2014 Marco Cerami (UP) Description Logic IV 6.11.2014 1 / 25. Preliminaries Preliminaries: First order logic Marco Cerami (UP) Description Logic IV 6.11.2014 2 / 25. Preliminaries Syntax Syntax: signature .
