Control Relays - ABB

6m ago
14 Views
1 Downloads
740.08 KB
18 Pages
Last View : 1d ago
Last Download : 3m ago
Upload by : Ciara Libby
Transcription

Type N, NE, NL & TNL Control relays Industrial control relays Type N, NE, NL & TNL Positive safety AC/DC operated Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage Co nt ro l re la ys 7 Description There are many applications where safety is very critical and it is important to use electrical equipment which ensures that dangerous machine movement cannot occur when a fault is detected with the moving contacts during the cycle which the fault is indicated. Regulations and standards have been written to ensure that safety is maintained: United States ANSI B11.19-1990 ANSI B11.20-1991 Germany SÜVA ZH1/457 France INRS United Kingdom BIA Switzerland SA The ABB Type N & NL 4 and 8 pole relays are designed with “Positive Guided” contacts and fulfill the regulations or standards shown. The relays can provide positive safety for the N.O. and N.C. contacts which assure that the N.O. contacts will not close before any N.C. contact opens. Therefore, if one of the contacts weld due to abnormal conditions in the control circuit, the other contacts will also remain in the same position as when the welding occurred. This means that the open contacts must maintain an air distance 0.5mm when the coil is energized at 110% Vc or when it is de-energized. UL File No: E39231 (N & NL) 7.1 1SXU000023C0202

ys tro n Co General information Type N, AC operated ela lr Description AC operated with laminated magnetic circuit. 2 versions: 4 pole or 8 pole. The width of 8 pole devices is identical to that of 4 pole devices; only the depth is increased. Side by side mounting possible. Self cleaning auxiliary contacts. Alone or by itself or with a 4 pole CA5 auxiliary contact block, these devices offer “positive safety” between their auxiliary contacts. Application Type N control relays are used for switching auxiliary circuits and control circuits. 7 Holes for screw mounting (screws not supplied). Distances between holes according to EN50 002. Quick mounting on 35 x 7.5mm DIN mounting rail according to IEC715 and EN50 022. Location of side mounted accessories: mounting on right or left hand side. Location of surge suppressors A2 z A 21 2 0 - 2 3 0 V 5V 06 0H H z 2 3 0 - 2 4R08 0 Clear marking of coil voltages and frequencies. NO7- 33NO8- NO - 23 5- 13 6 43NO Location of function marker. N40E Stops for attaching front mounted accessories. Terminals delivered in open position with captive screws (screws of unused terminals should be tightened). All terminal screws: Posidrive ( , -) N 2 Screwdriver guidance for all screws makes it possible to use motorized screwdrivers. All terminals provide protection against accidental direct contact with live parts according to VDE0106 – Part. 100 and offer IP 20 degree of protection according to IEC947-1. Frame type 8O 7O 44N 6O 34N 5- 14NO 24N Terminal marking according to IEC947-5-1 and EN50 011. Catalog number explanation N 40E–84 Coil voltage (see coil voltage chart below) Contact configuration Coil voltage selection chart Hz Relay type 12 24 48 110 120 125 208 60 N 81 83 84 84 34 50 N 81 83 84 DC NE, NL 80 81 83 86 87 7.2 1SXU000023C0202 Volts 220 240 277 380 415 440 480 500 600 36 80 42 86 86 51 53 55 80 85 86 55 88 89 Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage

Co General information Type NE, DC operated nt ro l re la ys Description Contactor relays with laminated magnet circuit and double-winding coil fed from a DC supply via a built-in N.C. lagging auxiliary contact. 1-stack version with three built-in auxiliary contacts. Self-cleaning auxiliary contacts Alone or fitted with a 4-pole CA5 auxiliry contact block, these devices offer mechanically linked contacts. Side by side mounting possible. Application NE. contactor relays are used for switching auxiliary circuits and control circuits. 7 Clear marking of the coil voltage Location of surge suppressor. Hole for screw mounting (screws not supplied). Distances between holes according to EN50 002. A2 z A 21 2 0 - 2 3 0 V 5V 06 0H H z 2 3 0 - 2 4R08 0 Electrical connection between the coil and the N.C. lagging auxiliary contact. NC 6- 31NC 7- NO - 21 4- 13 5 Quick mounting on 35 x 7.5mm mounting rail according to IEC 715 and EN 50 022. 85NC N.C. lagging auxiliary contact path. NE12E Location of side mounted accessories: mounting on right or left hand side. Location of function marker. Stops for attaching frontmounted accessories. All terminal screws: Terminals delivered in open position with captive screws (screws of unused terminals should be tightened). Screwdriver guidance for all screws makes it possible to use motorized screwdrivers. Posidrive ( , -) N 2 C 76C 86N 5- 22NC 32N 4 14NO All terminals provide protection against accidental direct contact with live parts according to VDE0106 – Part. 100 and offer IP 20 degree of protection according to IEC947-1. Frame type Terminal marking according to IEC947-5-1 and EN50 011. Catalog number explanation NE 12E–84 Coil voltage (see coil voltage chart below) Contact configuration Coil voltage selection chart Hz Relay type 12 24 48 110 120 125 208 60 N 81 83 84 84 34 50 N 81 83 84 DC NE, NL 80 81 83 86 87 Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage Volts 220 240 277 380 415 440 480 500 600 36 80 42 86 86 51 53 55 80 85 86 55 88 89 7.3 1SXU000023C0202

ys tro n Co General information Type NL & TNL, DC operated ela lr Type NL Type TNL Description Description Magnetic circuit variants: NL types: d.c. operated with solid magnetic circuits. 2 versions: 4 pole or 8 pole The width of 8 pole devices is identical to that of 4 pole devices; only the depth is increased. Alone or mounted with a 4 pole CA5 auxiliary contact block, these devices offer “positive safety” between their auxiliary contacts. 2 versions – 4-pole/1-stack or 8-pole/2-stack – The width of 8-pole devices is identical to that of 4 pole devices; only the depth is increased. Application Double sharp auxiliary contacts. Type NL control relays are used for switching auxiliary circuits and control circuits. Alone or mounted with a 4-pole CA 5 auxiliary contact block, these devices offer "positive safety" between their auxiliary contacts. Bifurcated auxiliary contacts. 7 Magnetic circuit variants – NL types: D.C. operated with solid magnetic circuits. – TNL types: D.C. operated with solid magnetic circuit and large coil voltage range. Application Type NL and TNL control relays are used for switching auxiliary circuits and control circuits. Clear marking of coil voltages. Location of surge suppressors. Quick mounting on 35 x 7.5mm or 35 x 15mm DIN mounting rail according to IE715 and EN50022. A1 Terminal marking according to IEC947-5-1 and EN50 011. -A2 2 4 V D8 C1 R NO 6- 23NO7- 5- 13 NO 33NO 8- 43 Location of function marker and surge suppressor. Holes for screw mounting (screws not supplied). Distances between holes according to EN50002. NL40E Stops for attaching front mounted accessories. Terminals delivered in open position with captive screws (screws of unused terminal should be tightened). Screwdriver guidance for all screws makes it possible to use motorized screwdrivers. 8O 7O 44N 6O 34N 5- 14NO 24N All terminal screws: M 3.5, posidrive ( ,-) N 2 All terminals provide protection against accidental direct contact with live parts according to VDE0106 – Part. 100. Frame type Catalog number explanation (T)NL 44E–84 Coil voltage (see coil voltage chart below.) Contact configuration Coil voltage selection chart Hz Relay type 12 24 48 110 120 125 208 60 N 81 83 84 84 34 50 N 81 83 84 DC NE, NL 80 81 83 86 87 7.4 1SXU000023C0202 Volts 220 240 277 380 415 440 480 500 600 36 80 42 86 86 51 53 55 80 85 86 55 88 89 Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage

Co Type N & NL AC & DC operated N40E-1 nt 4 3 2 4 5 6 7 8 0 1 2 4 3 2 1 0 re la ys NE12E-1 A.C. operated Contact configuration N.O. N.C. ro l 7 D.C. operated AC inductive current DC inductive current 10A 5A 10A 5A Catalog number N40E-84 N31E-84 N22E-84 N44E-84 N53E-84 N62E-84 N71E-84 N80E-84 List price Contact configuration N.O. N.C. 4 3 2 4 5 6 7 8 1 2 3 4 5 6 7 60 120 Coil voltage selection All AC operated catalog numbers include a 120VAC coil. All DC operated catalog numbers include a 110VDC coil. To select other coil voltages, substitute the code from the Coil Voltage Selection Chart for the first digit after the last dash in the catalog number. Ex.: A 240V coil is required for an N80 control relay: N80E-80 DC inductive current 10A 5A 10A 5A 10A 5A 10A 5A Catalog number List price NL40E-86 NL31E-86 NL22E-86 NL44E-86 1 NL53E-86 1 NL62E-86 1 NL71E-86 NL80E-86 NE12E-86 NE21E-86 NE30E-86 NE43E-86 1 NE52E-86 1 NE61E-86 1 NE70E-86 1 72 144 72 144 Block diagrams for NE. contactor relay coil supply Coil voltage selection chart Hz Relay type 12 24 48 110 120 125 208 60 N 81 83 84 84 34 50 N 81 83 84 DC NE, NL 80 81 83 86 87 0 1 2 4 3 2 1 0 2 1 0 3 2 1 0 AC inductive current Volts 220 240 277 380 415 440 480 500 600 36 80 42 86 86 51 53 55 80 85 86 55 88 89 Uc (DC) A1 Uc (DC) A2 A1 A2 Varistor B2 - Holding B2 - Holding U B1 - Pull-in B1 - Pull-in A3 Coil supply Uc 110 VDC A3 Coil supply via built-in varistor UC 110 VDC 1 NE43 – NE70 and NL44 – NL62 control relays cannot accept any front mounted auxiliary contact blocks. Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage Discount schedule KCN [OV] 7.5 1SXU000023C0202

ys tro n Co ela lr Type TNL 4 Pole & 8 Pole 4 Pole, 1 stack Number of contacts 1st stack 2nd stack N.O. N.C. N.O. N.C. 2 3 4 2 1 – – – – Catalog number Weight – – – 0.540 0.540 0.540 List price TNL22E- TNL31E- TNL40E- 121 8 Pole, 2 stack Number of contacts 1st stack 2nd stack N.O. N.C. N.O. N.C. 4 4 – – – 2 Catalog number Weight 4 2 0.600 0.600 List price TNL44E- TNL62E- 180 - Substitute the for the coil voltage code. See the Type TNL Coil voltage Selection chart beneath the photos. TNL22E Coil voltage selection Coil characteristics Min. UC Max No extra tolerances applicable to the Uc min. . max. values quoted in the Coil voltage selection table 17 24 36 42 50 77 90 152 Coil consumption at Uc max. q 20 C: 9 W pull-in/holding Replacement coils: consult us (standard coils used on NL control relays are not suitable for TNL control relays). – – – – – – – – Voltage 32 45 65 78 90 143 150 264 51 52 54 58 55 62 66 68 Mounting distance – for coil operating limits Uc min. Uc max. A mm B mm Ambient temp. C Max. switching frequency Operating cycles/h 2 20 20 1200 5 20 55 1200 A ABB ABB 7 ABB Pos.1 Add-on accessories Control relays CA5-10 Max. number of auxiliary contact blocks CA5-01 CA5-40 CA5-31 CA5-22 CA5-04 Pos. 3, 4 ABB B Timer TP Mechanical interlock Label marker Pos. 1, 3 or 4 TNL 40-E 4 2 1 1 1 – – VBC 30 BA 5-50 Pos. 1, 3 or 4 TNL 31-E 4 1 1 1 – – – VBC 30 BA 5-50 Pos. 1, 3 or 4 TNL 22-E 4 – 1 – – – – VBC 30 BA 5-50 Pos. 1 30 TNL - all types – – – – – – – VBC 30 BA 5-50 Mounting positions 7.6 1SXU000023C0202 Discount schedule KCN [OV] ABB ABB ABB Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage

Co Accessories Type N, NL & TNL nt ro l re la ys Auxiliary contact blocks Contacts N.O. N.C. Positioning N, NE, NL, TNL (front mount) N, NL, NE, TNL (4 pole) N, NE, NL, TNL (side mount) Catalog number 1 — — 1 CA5-10 CA5-01 4 2 — — 2 4 CA5-40N CA5-22N CA5-04N 1 1 CAL5-11 List price 15 30 Pneumatic timers CAL5-11 Timing range CA5-10 N, NL NE, TNL Contacts N.O. N.C. On delay 0.1 – 40s On delay 10 – 180s Off delay 0.1 – 40s Off delay 10 – 180s 1 1 1 1 1 1 1 1 Catalog number TP40DA TP180DA TP40IA TP180IA List price 108 Interlocks Contacts N.O. N.C. Feature TP40DA N, NE, NL, TNL N, NE, NL, TNL Mechanical/electrical Mechanical — — 2 — Catalog number VE5-1 VM5-1 List price 45 21 Mechanical latches Feature N, NL (4 pole only) Catalog number WB75A- List price 84 Coil voltage selection chart — mechanical latches 50 Hz 60 Hz VE5-1 24 42 48 110 220 – 230 230 – 240 380 – 415 415 – 440 24 42 48 110 220 230 380 440 – – – – – – – – 28 48 55 127 255 277 440 480 Voltage code 01 02 03 04 06 05 07 08 Identification markers Feature Pack of 50 Catalog number BA5-50 List price 15 BA5-50 Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage Discount schedule ABA [OF] 7.7 1SXU000023C0202 7

ys tro n Co Accessories Type N, NL, NE & TNL ela lr Coils Relay type Catalog number N NE ZA16- ZAE16- List price 24 24 Select the coil voltage from the Control Relay Coil Voltage Selection chart and substitute the letter code for the as the last digit in the catalog number. Coil voltage selection chart ZA16-84 Hz Relay type 12 24 48 110 120 125 208 60 N 81 83 84 84 34 50 N 81 83 84 DC NE, NL 80 81 83 86 87 Volts 220 240 277 380 415 440 480 500 600 36 80 42 86 86 51 53 55 80 85 86 55 88 89 Surge suppressors — for Type N control relays 7 Type Feature RV5/50 RC5-1/50 Varistor N, NE NL, TNL RC N Voltage range 24 – 50 VAC/DC 50 – 133 VAC/DC 110 – 250 VAC/DC 250 – 440 VAC/DC 24 – 50 VAC 50 – 133 VAC 110 – 250 VAC 250 – 440 VAC Catalog number RV5/50 RV5/133 RV5/250 RV5/440 RC5-1/50 RC5-1/133 RC5-1/250 RC5-1/440 List price 30 Technical data Type Control circuit Opening time growth factor Residual overvoltage or clipping voltage Remarks RV5/. Advantages Good energy absorption & damping 50 AC/DC 1.1 to 1.5 132V Unpolarized system 133 AC/DC 1.1 to 1.5 270V Disadvantages Clipping from Uvdr thus voltage 250 AC/DC 1.1 to 1.5 480V front up to this point 440 AC/DC 1.1 to 1.5 825V RC5-1/. or RC5-2/. AC 1.2 to 3 2 to 3 x Uc Advantages RC-EH300/. 7.8 1SXU000023C0202 Discount schedule ABA [OF] Very fast clipping Attenuation of steep fronts and therefore, high frequencies No operating delays Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage

Co Accessory mounting information Type N, NE, NL & TNL nt ro l re la ys 4 Pole, N control relays RV5 RC5-1 Surge suppressor CAL5-11 Side-mounted 2-pole auxiliary contact block NC 01 7 02 NC 01 NC N22E N31E N40E Control Relay NC 02 VM5-1 VE5-1 Interlock unit CA5-10 and CA5-01 Front-mounted 1-pole auxiliary contact blocks N22E N31E N40E Control Relay TP40DA TP180DA TP40IA TP180IA Pneumatic timer CAL5-11 Side-mounted 2-pole auxiliary contact block CA5. Front-mounted 4-pole auxiliary contact block 8 Pole, N contactor relays RV5 RC5-1 Surge suppressor CAL5-11 Side-mounted 2-pole auxiliary contact block NC 01 02 NC 01 NC 5-1 VM NC 02 CAL5-11 Side-mounted 2-pole auxiliary contact block Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage VM5-1 VE5-1 Interlock unit N44E N53E N62E N71E N80E Control Relay N44E N53E N62E N71E N80E Control Relay 7.9 1SXU000023C0202

ys tro n Co Possible accessory combinations Type N, NE, NL, TNL ela lr Configurations of accessories are different depending on whether front or side mounted. Accessories — Front mounting Accessories — Side mounting Auxiliary contact blocks TP - A Pneumatic Auxiliary contact Blocks 1-pole CA54-pole CA5timer block 2-pole CAL5-11 Type Main Built-in poles auxiliary contacts N . 1 2 2 E N . 1 3 1 E N . 4 0 E 7 N . N . N . N . N . 4 5 6 7 8 4 3 2 1 0 4 5 6 7 8 4 3 2 1 0 4 5 6 7 8 4 3 2 1 0 7.10 1SXU000023C0202 4 3 2 1 0 1 to 4 CA5- 1 CA5- 1 VM/E5-1 block 1 1-pole blocks or 4-pole block or — or CAL5-11 or 1 CAL5-11 block block E E 1 VM/E5-1 block or 1 or E — — — 1 CAL5-11 block CAL5-11 block E E TNL .1 2 2 E TNL .1 3 1 E TNL . 4 0 E TNL . 4 TNL . 5 TNL . 6 TNL . 7 TNL . 8 1 to 4 CA5- 1 CA5- 1 VM/E5-1 block 1 to 2 1-pole blocks or 4-pole block or 1 TP - A block CAL5-11 or 1 CAL5-11 block blocks E E 1 to 2 1 VM/E5-1 block CAL5-11 blocks or 1 CAL5-11 block E — — — E E NL . 1 2 2 E NL . 1 3 1 E NL . 4 0 E NL . NL . NL . NL . NL . 1 to 4 CA5- 1 CA5- 1 to 2 1 VM/ 5-1 block E 1-pole blocks or 4-pole block or 1 TP - A block CAL5-11 blocks or 1 CAL5-11 block E E 1 to 2 1 VM/E5-1 block CAL5-11 blocks or 1 CAL5-11 block E — — — E E NE . 1 2 2 E NE . 1 3 1 E NE . 4 0 E NE . NE . NE . NE . NE . Interlock units 1 to 4 CA5- 1 CA5- 1 VM/E5-1 block 1 1-pole blocks or 4-pole block or — or CAL5-11 or 1 CAL5-11 block block E 1 VM/E5-1 block E or 1 or 1 CAL5-11 block E — — — CAL5-11 block E E Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage

Co Technical data UL & CSA AC inductive ratings — NEMA A600 Continuous current Voltage 120V 240V 480V 600V 10 nt ys Maximum break 7200VA 720VA Continuous current Voltage 120V 250V 300-600V 5 Maximum make Maximum break 138VA 138VA DC coil consumption In rush Sealed In rush Sealed 80VA 8VA 7.0W 7.0W AC operating time DC operating time Pickup Dropout Pickup Dropout 10 – 20ms 10 – 20ms 30 – 90ms 10 – 20ms 30 million operations Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage re la DC inductive ratings — NEMA P300 Maximum make AC coil consumption AC mechanical endurance ro l 7 DC mechanical endurance 30 million operations 7.11 1SXU000023C0202

ys Technical data Terminal marking and positioning Type N ela lr tro n Co N control relays Pole configuration schematics 4 Pole control relay 13 NO A1 13 A1 21 A2 31 43 A1 21 13 A2 33 43 13 NO NC NO NO NO NC NC NO A2 33 43 A1 23 NO NO NO NO 13 A1 23 A2 33 43 NO NO NO NO 51 61 71 81 NC NC NO NC NO NO NO NO NO NO 52 62 72 82 NO NO NO NO 14 14 14 14 32 44 A2 22 44 A2 N31E N22E 7 34 24 34 44 A2 24 43 NO NC 22 NC 32 NO 44 A1 A2 N22E 34 13 NO 21 NC 33 NO 43 NO NO 14 NC 22 NO 34 NO 44 A1 A2 A1 23 13 A2 43 33 13 33 A2 43 13 NO NO NO NO 53 61 71 83 NO NO NO NO 53 61 71 81 NO NC A1 23 NO NC NC NC NC NO A1 23 33 A2 43 13 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 NO NC A2 33 43 NO NO NO NO NO NO 54 62 72 82 NO NO NO NO 54 62 72 84 NO NO NO NO 54 62 74 84 NO NO NO NO 54 64 74 84 NO NO NO NO 14 14 14 14 24 34 44 A2 A1 23 33 A2 41 13 44 A2 A1 23 33 NO NC NC NO 44 A2 24 34 14 N33/11 24 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 A1 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO N80E A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 34 NO 14 NO 24 NO 34 NO 44 N40E A1 13 NO 23 NO 33 NO A2 NO 14 NO 24 NO 34 43 NO 53 NO 61 NC 71 NC 81 NC NO 44 NO 54 NC 62 NC 72 NC 82 A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 N44E N80E A1 13 NO 23 NO 33 NO 41 NC 51 NC 61 NC 75 NC 87 NO A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 75 NC 87 NO A2 NO 14 NO 24 NO 34 NC 42 NC 52 NC 62 NC 76 NO 88 A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 76 NO 88 N51/11 N31/11 NC NO 14 42 A2 13 NO 44 A2 A2 43 54 62 76 88 NO NO NO NO 34 34 N71E 52 62 76 88 NO NO NO NC 24 24 43 NO N62E NO NO NO NO 53 61 75 87 NO NO NO NC 51 61 75 87 NC NC 34 N62E N53E 13 24 33 NO N53E A1 NO NO NO NO 53 63 73 83 NO NO NO NO 53 61 73 83 23 NO N31E N71E A1 23 13 NO 4 Pole control relay with 4 pole adder deck 44 A2 N44E N40E 31 NC NC NC NO NC NC NO 22 NO 14 A2 21 NC 44 A2 N51/11 Other possible contact combinations with auxiliary contacts added by the user 13 A1 21 33 A2 43 13 A1 21 33 A2 43 NO NC NO NO NO NC NO NO 53 NO 54 5- 13 A1 23 33 A2 43 13 A1 23 33 A1 A2 43 NO NO NO NO NO NO NO NO 51 61 NC NC 52 62 5- 6- 5- 6- A2 5- -3 NO -4 NO NC NO NO NO NC NO NO NO NO NO NO NO NO NO NO 14 14 14 14 22 34 44 A2 Combination 41 E 22 34 44 A2 N 31 E CA5-10 24 34 44 A2 Combination 42 E 24 34 -1 NC -2 -1 NC -2 A1 CA5-01 CA5-01 A2 A1 23 A2 43 33 13 NO NO NO NO 53 NO 54 33 A2 43 13 24 34 44 A2 Combination 50 E 7.12 1SXU000023C0202 A1 23 33 A2 43 13 A1 23 33 A2 43 NO NO NO NO NO NO NO NO NO NO NO NO 5- 53 63 NO NO 54 64 5- 6- 5- 6- 5- NO NO NO NO 14 A1 23 -3 NO -4 NO NO NO NO NO NO NO NO NO NO NO NO 14 14 14 24 N 40 E 34 44 A2 CA5-10 24 34 44 A2 Combination 60 E 24 N 40 E A2 34 -3 NO -4 -3 NO -4 A1 CA5-10 CA5-10 43 NO 53 NO NO 14 NC 22 NO 34 NO 44 NO 54 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 13 NO 23 NO 33 NO 43 NO 53 NO NO 14 NO 24 NO 34 NO 44 NO 54 Combination 50 E 44 A2 33 NO Combination 42 E A1 13 21 NC Combination 41 E 44 A2 N 40 E 13 NO A2 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 Combination 60 E Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage

Co Technical data Terminal marking and positioning Type NE nt ro l re la ys NE control relays Pole configuration schematics 13 A1 21 A2 31 85 NO NC NC NC 13 A1 21 A2 33 85 NO NC NO NC 13 A1 23 33 A1 A2 85 NO NO NO NC A2 A3 85 13 NO 21 NC 31 NC 86 NO 14 NC 22 NC 32 NE12E NO NC NC NC NO NC NO NC NO NO NO NC 14 14 14 22 32 86 A3 NE12E 22 34 86 A3 NE21E Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage 24 34 A1 A2 A3 85 13 NO 21 NC 33 NO 86 NO 14 NC 22 NO 34 NE21E A1 A2 A3 85 13 23 NO NO 33 NO 86 NO NO 14 24 NO 34 NE30E 86 A3 7 NE30E 7.13 1SXU000023C0202

ys tro n Co Technical data Terminal marking and positioning Type NL & TNL ela lr Standard devices without addition of auxiliary contacts A1 21 31 43 A1 21 13 NO NC NC NO 33 43 13 NO NC NO NO A1 23 33 43 A1 NO NO NO NO A2 NO NC NC NO NO NC NO NO NO NO NO NO 14 14 14 22 32 44 A2 NL22E TNL22E 7 13 A1 23 34 44 A2 NL31E TNL31E 33 43 A1 23 13 NO NO NO NO 51 61 71 81 NC NC 22 33 NO NC 14 14 NL44E TNL44E 24 31 NC 43 NO A1 NO 14 NC 22 NC 32 NO 44 A2 NL40E TNL40E 13 NO 21 NC 33 NO 43 NO NO 14 NC 22 NO 34 NO 44 A1 A2 NL31E TNL31E 13 NO 23 NO 33 NO 43 NO NO 14 NO 24 NO 34 NO 44 NL40E TNL40E A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 NL62E TNL62E NL44E TNL44E NC NO 54 62 72 84 NO NO NO NO 44 A2 21 NC NL22E TNL22E 44 A2 NO NO NO NO 53 61 71 83 NC NC 34 34 43 52 62 72 82 NO NO NO NO 24 24 13 NO E0491D 13 34 44 A2 NL62E TNL62E Other possible contact combinations with auxiliary contacts added by the user A1 13 A1 21 33 43 13 NO NC NO NO 53 NO 54 A1 21 A1 13 23 33 43 5- 5- NO NC NO NO NO NC NO NO 14 14 22 34 44 A2 Combination 41E 22 34 51 61 NC NC 52 62 -3 NO -4 44 A2 33 43 5- 6- 5- 6- NO NO NO NO NO NO NO NO 14 14 24 34 A2 NO NO NO NO 44 A2 Combination 42 E CA5-10 CA5-10 NL31E TNL31E 13 43 NO NO NO NO NO NC NO NO 33 A1 23 24 34 -1 NC -2 -1 NC -2 A1 CA5-01 CA5-01 CA5-01 CA5-01 A2 13 A1 23 33 43 13 NO NO NO NO 53 NO 54 A1 23 33 43 5- 5- 33 13 43 53 63 NO NO 54 64 -3 NO -4 33 43 5- 6- 5- 6- NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO 14 14 14 14 24 34 44 A2 Combination 50E 13 A1 23 33 43 NO NO NO NO 34 44 A2 A1 23 33 14 14 44 A2 Combination 80E 7.14 1SXU000023C0202 53 67- 85NO NO NO NO 34 24 34 NL40E TNL40E 34 44 A2 24 34 NL40E TNL40E -3 NO -4 -3 NO -4 A1 44 A2 CA5-10 CA5-10 CA5-10 CA5-10 63 73 83 43 NO 53 NO NO 14 NC 22 NO 34 NO 44 NC 54 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 13 NO 23 NO 33 NO 43 NO 53 NO NO 14 NO 24 NO 34 NO 44 NO 54 Combination 50 E A2 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 Combination 60 E A1 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 43 NO NO NO NO 67- 85- 54 64 74 84 NO NO NO NO 24 24 Combination 60 E CA5-10 CA5-10 NL40E TNL40E 13 NO NO NO NO 53 63 73 83 24 A2 NO NO NO NO NO NO NO NO NO NO NO NO A1 23 33 NO Combination 42 E A1 A1 13 23 21 NC Combination 41 E 44 A2 NL40E TNL40E 13 NO Combination 80 E NO NO NO NO 54 64 74 84 44 A2 CA5-40E CA5-40E Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage

Co Technical data IEC nt ro l re la ys Type NE12, NE 21, NE 30 N22, N31, N40 N44, N53, N62, N71, N80 NL22, NL31, NL40 NL44, NL62 Number of poles 3 4 8 4 8 Insulation characteristics Rated insulation voltage Ui acc. to IEC947-5-1 and VDE0110 (Gr. C) acc. to UL/CSA Rated impulse withstand voltage Uimp acc. to IEC947-5-1 V V 690 600 kV 8 General technical data Standards Air temperature near contactor — for operation in free air: — for storage: Devices complying with international standards IEC947-5-1/947-4-1 and European standards EN60 947-5-1/60 947-4-1 Electromagnetic compatibility (EMC) according to amendment A11 to IEC947-1; EN60 947-1 and amendment 2 to IEC947-4-1 C C -40 to 55 (0.85 – 1.1 Uc) / 55 to 70 (Uc) -60 to 80 Climatic withstand 7 according to IEC68-2-30 and 68-2-11 – UTE C63-100, Specification II Mounting positions Positions 1 to 5 - θ 55 C : 0.85 – 1.1 - θ 55 - 70 C : Position 6 (see diagrams below) - θ 55 C : 0.95 – 1.1 - θ 55 C : not acceptable unauthorized Operating altitude m 3000 Shock withstand according to 1/2 sinusoidal shock, 11ms: no change in contact position IEC 68-2-27 and EN 60068-2-27 Shock direction: A, C1, C2 : 20 g Mounting pos. 1 B1 : 5g (see below) B2 : 15 g C1 A ABB A B1 B2 C2 Mounting — on mounting rail 35mm according to IEC715 and EN50022 — with screws (not supplied) 2 x M4 Connection terminals (delivered in open position, screws of unused terminals must be tightened) M 3.5 ( ,-) posidrive 2 screw with cable clamp Connection capacity 1 x AWG 2 x AWG Rigid solid Degree of protection according to IEC529, IEC947-1 and EN60529 — Pole terminals — Coil terminals Mounting positions IP20 IP20 Electrical durability of contacts utilization category AC – 15 according to IEC947-5-1 making current: 10 x Ie with cos ϕ 0.7 and Ue breaking current: Ie with cos ϕ 0.4 and Ue Pos. 6 30 30 ABB Pos. 5 Pos. 4 IP20 IP20 The curves opposite show the electrical durability of the control relays as well as the add-on auxiliary contact blocks in relation to the breaking current Ic. These curves have been drawn for resistive and inductive loads up to 690V, 40 – 60 Hz. 30 20 10 CA5, CAL 5 4a nd 5 Million ops Pos. 2 16 – 12 16 – 12 4a 3 nd 2 8-p ole 8-p ole 1 NL N& NE typ es typ es 0.5 Pos. 1 30 Pos. 1 0.3 0.2 0.1 0.02 0.05 0.1 0.2 0.3 0.5 1 2 3 4 5 6 10 Breaking current (A) Pos. 5 Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage 7.15 1SXU000023C0202

ys tro n Co ela lr Technical data IEC Type NE12, NE21, NE30 N22, N31, N40 N44, N53, N62, N71, N80 NL22, NL31, NL40 NL44, NL62 Number of poles 3 4 8 4 8 Pole utilization characteristics Rated operational voltage UeV Conventional thermal current in free air Ith according to IEC947-5-1 θ 40 C 690 A 16 16 in AC-15 according to IEC947-5-1 24 – 127 V 50/60 Hz 230 – 240 V 50/60 Hz 400 – 415 V 50/60 Hz 500 V 50/60 Hz 690 V 50/60 Hz A A A A A 6 4 3 2 2 6 4 3 2 2 in DC-13 according to IEC947-5-1 24VDC 48VDC 72VDC 125VDC 250VDC A/W A/W A/W A/W A/W 6/144 2.8/134 1/72 0.55/69 0.3/75 6/144 2.8/134 1/72 0.55/69 0.3/75 Rated operating current Ie 7 Field of rated frequencies Hz Mechanical durability in operating cycles Max. switching frequency cycles/h 25 – 400 10 million 3000 20 million 6000 Electrical durability in operating cycles Max. switching frequency cycles/h 1200 10 x Ie /AC-15 10 x Ie /AC-15 Rated making capacity according to IEC947-5-1 Rated breaking capacity according to IEC947-5-1 gG (gl) protection fuse A Rated short time withstand current at ambient temp. of 40 C, in free air, from cold state 10 1.0 s 0.1 s 100A 140A 50A 100A Insulation resistance at 500 VDC after durability test: 5 MΩ Min. switching capacity with failure rate below 10-6 Non overlapping time between N.O. and N.C. contacts Power loss per pole at 6A 30 million 6000 17V / 5mA ms 24V / 5mA 2 W 0.10 0.15 Magnet system characteristics Coil operating limits θ 40 C Drop out voltage in % of Uc Coil consumption (average value) — a.c. operation: 50 Hz pull in 60 Hz pull in 50/60 Hz1 pull in 50/60Hz holding according to IEC 947-5-1 : 0.85 - 1.1 Uc 10 – 30% roughly 40 – 65% VA VA VA/VA VA/W — — — — 70 80 74/70 8/2 W W 90 2 — — — d.c. operation: cold pull in warm holding roughly 10 – 30% — — — — 3 3 Rated control voltage Uc — AC operation: 50/60 Hz — DC operation: Max. permissible short supply interruption without opening of contacts V VDC ms — 12 – 250 2 Operating time between coil energization and: — closing of N.O. contact ms 10 – 16 — opening of N.C. contact ms 8 — 12 between coil de energization and: — opening of N.O. contact ms 5 — 14 — closing of N.C. contact ms 11 — 17 20 – 690 — 2 — 12 – 240 2 10 – 26 7 – 21 100 20 – 70 4 – 11 9 – 16 10 – 17 16 – 27 1 50/60 Hz coils: voltage codes 80 to 88, see page 7.5. 7.16 1SXU000023C0202 Low Voltage Products & Systems ABB Inc. 888-385-1221 www.abb.us/lowvoltage

00.00 Inches 00.00 [Millimeters] Co Approximate dimensions Type N, NE, NL, & TNL AC & DC operated nt ro l re la ys Type N, 4 Pole, AC operated 2.91 74 2.68 68 1.73 0.22 1.38 5.5 35 44 2

values quoted in the Coil voltage selection table Coil consumption at Uc max. q 20 C: 9 W pull-in/holding Replacement coils: consult us (standard coils used on NL control relays are not suitable for TNL control relays). Pos.1 A B Pos. 3, 4 ABB ABB ABB ABB A B Ambient temp. Max. switching frequency mm mm C Operating cycles/h

Related Documents:

3.5 Phase-to-phase faults 4. PROTECTIVE RELA VS 4.1 General 4.2 Differential relays 4.2.1 General 4.2.2 Differential relays for fully insulated transformers 4.2.3 Differential relays for auto-transformers 4.3 Overcurrent protection and impedance relays 4.3.1 Time-overcurrent relays 4.3.2 Under-impedance relays 4.3.3 Distance relays 4.4 Grou d .

Directional Relays 4 Differential and Timing Relays 5 Auxiliary Relays 6 Reclosing Relays 7 Synchronizing Relays 8 Generator and Motor Protection Relays 9 Voltage and Frequency Relays 10 Test Equipment and Accessories 11 General Information, Dimensions and Data12 . GE Multilin Subject:

ABB Control SECRL - 1 2001-06-19 A New Contactor Range from ABB New Generation ABB Contactors. ABB Control SECRL - 2 2001-06-19 The ABB range of A The ABB range of A contactorscontactors A 9, A 12, A 16 A 26, A 30, A 40 A 50, A 63, A 75 A 95, A

Monitoring, Controlling and Switching with SIRIUS Relays One range for every application SIRIUS Monitor. 2 SIRIUS relays – . SIRIUS monitoring relays: Perfect protection of machines and systems Monitoring relays 3UG451 / 461 / 463 monitoring relays for line and single-phase

Motor Protection Relays - MM30, MM30W, MPR300, N-DIN-MA Generator Protection Relays -MG30, MG30I, MD32G Transformer Protection Relays - IM30T, MD32T, MD32TM Voltage and Frequency Relays - MC1V, MC3V, UFD34 Feeder Protection Relays- MC20, MC30, FMR Vector Surge Protection Relay -UM30A Neutral Displacement Relay -MND11 Reverse Power Relay -MRP11

ABB - global market and technology leader in AC drives ABB (www.abb.com) is a leader in power and automation technologies that enable utility and industry customers to improve their performance while lowering environmental impact. ABB is the world's largest drives manufacturer. The ABB Group of companies operates in around 100 countries

IEC 60081 (1997) Double-capped fluorescent lamps — Performance specifications IEC 60255-5 (1977) Electrical relays — Part 5 : Insulation tests for electrical relays IEC 60255-8 (1990) Electrical relays — Part 8: Thermal electrical relays IEC 60255-23 (1994) Electrical relays — Part 23: Contact performance IEC 60269-1 (1998) Low-voltage .

Institute (ANSI) A300 Part 7-2006 Vegetation Management standards and the International Society of Arboriculture best management practices. IVM has continued to evolve over the last decade, with examples of expanded emphasis of work on: 1) broad assessment of environmental impact, 2) building social awareness and responsibility; and 3) elevated focus on safety and reliability of service. The .