Parts Manual (RG, CRG, HDRG Grader Blade) 05-22 - Bush Hog
RG 60/72/84 CRG48/60 HDRG84/96 ROAD GRADER Published 05/22 SECTION 24 2015 Alamo Group Inc.
To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense! WARRANTY INFORMATION: Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty RegistrationForm in full and return it to within 30 Days. Make certain the Serial Number of the Machine is recorded on theWarranty Card and on the Warranty Form that you retain.
LIMITED WARRANTY Bush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an authorized Bush Hog dealer, that the equipment be free from defects in material and workmanship for a period of one (1) year for non-commercial, state and municipalities’ use and ninety (90) days for commercial use from date of retail sale. The obligation of Bush Hog to the purchaser under this warranty is limited to the repair or replacement of defective parts. Replacement or repair parts installed in the equipment covered by this limited warranty are warranted for ninety (90) days from the date of purchase of such part or to the expiration of the applicable new equipment warranty period, whichever occurs later. Warranted parts shall be provided at no cost to the user at an authorized Bush Hog dealer during regular working hours. Bush Hog reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship. DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES Bush Hog’s obligation under this limited warranty, to the extent allowed by law, is in lieu of all warranties, implied or expressed, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE and any liability for incidental and consequential damages with respect to the sale or use of the items warranted. Such incidental and consequential damages shall include but not be limited to: transportation charges other than normal freight charges; cost of installation other than cost approved by Bush Hog; duty; taxes; charges for normal service or adjustment; loss of crops or any other loss of income; rental of substitute equipment, expenses due to loss, damage, detention or delay in the delivery of equipment or parts resulting from acts beyond the control of Bush Hog. THIS LIMITED WARRANTY SHALL NOT APPLY: 1. To vendor items which carry their own warranties, such as engines, tires, and tubes. 2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident. 3. If parts not made or supplied by Bush Hog have been used in connection with the unit, if, in the sole judgement of Bush Hog such use affects its performance, stability or reliability. 4. If the unit has been altered or repaired outside of an authorized Bush Hog dealership in a manner which, in the sole judgement of Bush Hog, affects its performance, stability or reliability. 5. To normal maintenance service and normal replacement items such as gearbox lubricant, hydraulic fluid, worn blades, or to normal deterioration of such things as belts and exterior finish due to use or exposure. 6. To expendable or wear items such as teeth, chains, sprockets, belts, springs and any other items that in the company’s sole judgement is a wear item. NO EMPLOYEE OR REPRESENTATIVE OF BUSH HOG IS AUTHORIZED TO CHANGE THIS LIMITED WARRANTY IN ANY WAY OR GRANT ANY OTHER WARRANTY UNLESS SUCH CHANGE IS MADE IN WRITING AND SIGNED BY BUSH HOG’S SERVICE MANAGER, 2501 GRIFFIN AVE., SELMA, ALABAMA 36703. Record the model number, serial number and date purchased. This information will be helpful to your MODEL NUMBER SERIAL NUMBER dealer if parts or service are required. DATE OF RETAIL SALE MAKE CERTAIN THE WARRANTY HAS BEEN FILED WITH BUSH HOG SELMA, ALABAMA
July, 2015 TABLE OF CONTENTS ROAD GRADER RG 60, RG 72, RG 84 SERIES Frame and Related Parts RG60, RG72, RG84 .24-1-1 Frame and Related Parts HDRG84, HDRG96 .24-1-2 Frame and Related Parts CRG48, CRG60.24-1-4 2015 Alamo Group Inc.
May,2022 RG 60, RG 72, RG 84 SERIES FRAME AND RELATED PARTS Ref. No. Part No. 1 2 3 4 5 6 7 50069718 95155 95157 95158 95121 50031991 50005860 8 9 10 Description Skid Flatwasher 3/8 SAE Locknut 3/8 Plow Bolt 3/8 x 1 Hex Nut 5/8 Plow Bolt 5/8 x 1-1/2 Cutting Edge RG 60 Cutting Edge RG 72 Cutting Edge RG 84 Hitch Pin Retainer Pin Hair Pin Qty. Req’d. Ref. No. Part No. 2 10 10 10 A/R A/R 1 1 1 2 A/R 2 11 12 13 50005861 50031990 50069585 50069586 50069587 50057097 90960BH 50031212 50031213 50083392 00725746 14 15 16 17 18 19 24-1-1 Description Hair Pin Shank and Piont Assy. Model Decal RG 60 Model Decal RG 72 Model Decal RG 84 Caution Decal Warning Decal Amber Reflector Red Reflector Bush Hog Logo Decal Danger/ Peligro Decal Qty. Req’d. A/R A/R 2 2 2 1 1 2 2 2 1 2015 Alamo Group Inc.
July, 2015 HDRG84 / HDRG96 SERIES FRAME AND RELATED PARTS y 1# u 1@ 1) 1! 1 t 1# i q w o 1% i r 1 1 1&1*1( e t 2)2! 2@2# 24-1-2 2015 Alamo Group Inc.
May, 2022 HDRG84 / HDRG96 SERIES FRAME AND RELATED PARTS Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Part No. Description Qty. 50076161 95152 95158 99332 50076160 50076166 50076163 50031991 50005861 99342 2850005 90959 50057097 00725746 50031214 50031212 50076164 50076167 50083388 50072329 15830 44624BH 15093 44539BH 20475 44336BH Shank w/ Plow Point Assy. Plow Point, Heat Treated Cutting Edge 83-3/4” HDRG84 Cutting Edge 95-3/4” HDRG96 Cutting Edge Weldment HDRG84 Cutting Edge Weldment HDRG96 Skid Shank Retainer Pin Hair Pin Lift Pin Cat. II &III Klick Pin Warning Decal Caution Decal Peligro Decal Red Reflector Amber Reflector Model Decal HDRG84 Model Decal HDRG96 Logo Decal, Bush Hog Plow Bolt 3/8” x 1-1/2” Flatwasher 3/8” SAE Hex Nut 3/8” Nylock Capscrew 1/2” x 1-1/2” Gr.5 Hex Nut 1/2” Nylock Plow Bolt #3 Hd 5/8” x 2” Hex Nut 5/8” 24-1-3 HDRG84 HDRG96 6 6 2 8 8 2 2 2 2 6 6 8 8 2 2 1 1 1 2 2 1 1 2 10 10 10 8 8 14 14 16 16 2015 Alamo Group Inc.
May, 2022 CRG48 CRG60 SERIES FRAME AND RELATED PARTS Ref. No. Part No. 1 2 3 4 5 6 7 50071421 099 50058098 63765 ---------- 8 9 Description Skid Flatwasher 3/8” Locknut, Nylock 3/8” Plowbolt 3/8” x 1” Hex Nut 5/8” Plow Bolt 5/8” x 1-1/2” Cutting Edge 3/8” x 6” x 47-3/4” Cutting Edge 3/8” x 6” x 59-3/4” Lift Pin Cat.1 Locknut 7/8” Qty. Req’d. Ref. No. Part No. 2 6 6 6 8/10 8/10 2 2 2 2 10 11 12 ---------N/A 50071519 50071527 50057097 90960BH 50031212 50031213 50083392 00725746 24-1-4 13 14 15 16 17 18 Description Lockwasher 7/8” Serial No Decal Decal CRG48 Decal CRG60 Caution Decal Warning Dceca Reflector, Amber Reflector, Red Bush Hog Decal Decal, Peligro Qty. Req’d. 2 1 2 2 1 1 2 2 2 1 2015 Alamo Group Inc.
2501 Griffin Ave. Selma, AL 36703 www.bushhog.com
If parts not made or supplied by Bush Hog have been used in connection with the unit, if, in the sole judgement of Bush Hog such use affects its performance, stability or reliability. 4. If the unit has been altered or repaired outside of an authorized Bush Hog dealership in a manner which, in the . ROAD GRADER RG 60, RG 72, RG 84 SERIES .
canon - printer 5 product code description crg328/crg 312/912/712/ crg 713/313/crg 125/325/725/925/crg 326/726/cf380a(312a)/ cf380x(312x)/cf38
Interfacing, Thomson Delmar Learning, 2006. ECE 4510/5530 13 Clock and Reset Generation Block (CRG) (2 of 2) CRG generates the clock signals required by the HCS12 instruction execution and all peripheral operations. – The clock signal has the form of square waveform. Crystal oscillators are often used to generate clock signals.
On-line Chemical Resistance Guide 19 The CRG is a resource to help you choose the best elastomer for your application. Access to our on-line Chemical Resistance Guide (CRG) is available through the DuPont Performance Elastomers web site at www.dupontelastomers.com,where detailed information about our product line may also be found.
Dozer Blade Parts, Crawler Loader Parts, Suspension Parts. Section C 2015 Parts Catalog SECTION C DOZER BLADE PARTS, CRAWLER LOADER PARTS, DOZER SUSPENSION PARTS Page BLADE & C-FRAME PARTS CASE C2-C9. DRESSER C18-C19: JOHN DEERE C10-C17; C-FRAMES. CASE C5. JOHN DEERE C13, C15: CRAWLER LOADER PARTS. CASE C1. JOHN DEERE C1:
Parts, Inspection and Maintenance 17 Warranty Statement and Service Policy 18 Specifications: P220 & P245 19 P225 20 P226 21 P228 22 P229 23 P239 24 Parts Diagram - P220 26 Parts List - P220 27 Parts Diagram - P225 28 Parts List - P225 29 Parts Diagram - P226 30 Parts List - P226 31 Parts Diagram - P228 32 Parts List - P228 33 Parts Diagram .
parts of major components. All sections in this manual consist of parts illustrations and corresponding parts lists. The parts illustrations are numbered with Ref numbers which refer to corresponding parts lists. The parts lists include a number of columns of information:--Ref-- column refers to the reference number on the parts illustration.
The OPTION section lists repair parts of options. The BREAKDOWN section lists available repair parts of major components. All sections in this manual consist of parts illustrations and corresponding parts lists. The parts illustrations are numbered with Ref numbers which refer to corresponding parts lists. The parts lists include a number of .
2nd Grade . ELA Priority Standards Grade 2 CCSS PA Core Foundational Skills RF.2.3 CC.1.1.2.D Know and apply grade level phonics and word analysis skills in decoding words. Distinguish long and short vowels when reading regularly spelled one- syllable words. Decode two-syllable words with long vowels and words with common prefixes and suffixes. Read grade level high-frequency .
