TACK LIFE T8 Pro Jump Starter User Manual - Manuals
Manuals — User Manuals Simplified. TACK LIFE T8 Pro Jump Starter User Manual Home » TACK LIFE » TACK LIFE T8 Pro Jump Starter User Manual User Manual Jump Starter Model: T8 Pro Thank you for choosing TACKLIFE T8 Pro smart car jump starter. Please read the user manual carefully before using it and keep it for further reference.
Contents [ hide 1 PARTS AND FUNCTIONAL DESCRIPTION 2 LCD SCREEN DISPLAY 3 PART LIST 4 TECHNICAL SPECIFICATION 5 FAQ 6 TROUBLESHOOTING 7 COMPOSITIONS AND AMOUNT OF TOXIC AND HARMFUL SUBSTANCES IN T8 Pro 8 WARNING 9 WARRANTY 10 Documents / Resources 10.1 References 11 Related Posts PARTS AND FUNCTIONAL DESCRIPTION 1. Power Button 2. Compass 3. LCD Screen 3.15V/1A Input 5. 12V/10A Output 6. 5V/2.1A Output 7. Quick Charge Output 8. 12V Smart Jumper Socket 9. LED Flashlight (Stable/Strobe/SOS) 10. Emergency Light
15V/1A Input 12V Jump Clamps USB 5V/2.1A Output 12V/10A Output LCD SCREEN DISPLAY Press the power button, the LCD screen will show the remaining power of the T8 Pro. When it is fully recharged, it will show 100%, while XX% indicates there is XX% power left. The product is being charged when the LCD screen shows “IN”. The LCD screen will show “OUT” when the 5V/9V quick charge or 12V output is being used.
Steps To Charge The T8 Pro 1. Plug the wall charger into the universal socket. 2. Plug the end of the wall charger into the 15V input port of T8 Pro. OR 1. Plug the car charger into the socket of a cigarette lighter. 2. Plug the end of the car charger into the 15V input port of T8 Pro. How To Jump Start 12V Vehicles Firstly, plug the blue end of the jump clamps into the host of T8 Pro. Secondly, connect the jump clamps with the car battery, red to positive ( ) battery terminal, and black to negative (-). Then operate with the following instruction:
Graphic Green Light Red Light Reason/Solutions ON OFF The connection is correct, ready to start your car. Blinking OFF OFF OFF The power of the car batt ery is too low or the car b attery is totally dead. Pres s the “BOOST” button, the green light will turn on the n start the engine in 30 seconds. OFF ON The internal battery is too hot, allow the unit to cool / The T8 pro is at low powe r capacity / Please connect tightly the unit and clamps again. OFF Blinking Overcurrent protection, w ait for at least 30 seconds. Blinking Blinking Temperature protection ini tiates, wait 10 mins to res ume automatically. Red light on with Buzzing Reverse the battery connections, please reconnect the poles correctly until th e green light is on. 1. Make sure all of the connections are right and then start the engine. 2. Once you have started your engine, disconnect the clamps, and remove the T8 pro.
Use T8 Pro To Charge Your Cell Phone And Tablet. 1. Plug the USB cable into the USB quick charge output of the device. 2. Connect the Micro-USB end with your cell phone or tablet. 3. Push the power button, the device will charge your cell phone or tablet. Use T8 Pro To Power The Other Car Equipment. 1. Plug the cigarette adapter into the 12V/10A output of the device. 2. Connect the power cable of the other 12V car equipment with the cigarette adapter. 3. Press the power button to power the other 12V vehicle equipment. LED Flash Light Instructions 1. Hold the power button for a few minutes to turn on the flashlight. Press one more time to change the modes from Stable, Strobe, SOS to OFF. 2. Press the power button twice quickly to turn on the red emergency light. Press one more time to turn it OFF. PART LIST
No. Content name Quantity No. Content name Quantity 8 T8 Pro 1 @ Type-C Cable 1 0 Smart Jumper Cable 1 8 Cigarette Lighter Adapter 1 0 Wall Charger 1 @ EVA Storage Case 1 Car Charger 1 @ User Manual 1 0 USB Cable 1 C. Warranty Card 1 TECHNICAL SPECIFICATION Model: T8 Pro Size: 185*87*40mm Weight: 550g Battery Capacity: 18000mAh (66.6Wh) Output: 5V/9V Quick Charge; 5V/2.1A; 12V/10A; 12V Jumper Socket Input: 15V/1A Full Charging Time: 4.5h Starting Current: 500A (3s), 300A (5s) Peak Current: 1200A Waterproof Level: IP65 Working Temperature: -20 60 FAQ Q: How to turn off the device A: This device is equipped with an intelligent detection system and will shut down automatically in 30 seconds once there is no load or it is fully charged. Q: How long will it take before the device is fully charged? A: It will take about 4.5 hours with the 15V/1A wall charger. Q: How many times can T8 Pro charge the cell phone? A: It depends on the capacity of your cell phone. Taking iPhone 6 as an example, T8 Pro can charge it about 7 times.
Q: How many times can this device jump-start a vehicle when it is fully charged. A: It can jump-start the vehicle about 25 times. Q: What is the lifetime of T8 Pro A: About 3-5 years in general condition. Q: How long can T8 Pro hold a charge? A: With scientific circuit design, can T8 Pro hold charge up to 12 months. But in order to extend the service life of the lithium battery, we suggest charging it every three months. TROUBLESHOOTING If the following operations can not solve your problems, please stop using the device and contact the manufacturer with an E-mail: support@autotacklife.com. Problem Reason Nothing happens when pressing the power button. The voltage of T8 Pro is really low and trigger the low power protection to shut down the device. Plug the w COMPOSITIONS AND AMOUNT OF TOXIC AND HARMFUL SUBSTANCES IN T8 Pro TOXIC AND HARMFUL SUBSTANCES Pb Hg Cd Cr (Vi) PBB PBDE 0 0 0 0 0 0 0: Indicate all homogeneous materials hazardous substances content is below the MCV limit specified in the St andard 2002/95/EC(RoHS). WARNING 1. Read the instruction carefully before using the device. 2. Leave the device far from children. 3. Do not place the product in an environment where the temperature exceeds 60 C 4. Do not shower dip the product in water. 5. Do not place the product in an extremely hot environment or fire. 6. Do not operate the product in an explosive environment, such as in the flammable liquids, gases or dust environment. 7. Do not use the device as a toy. 8. Do not use this device for charging a car. 9. Do not drop the product. If the product is impacted or damaged, it must be repaired by a qualified technician. 10. Do not use damaged or modified battery packs. Damage or modification of batteries may have unpredictable consequences, increasing the risk of fire, explosion, and injury.
11. To reduce the risk, keep away from children when using the device. 12. Make sure someone is nearby when you are using the device. 13. Please remove metal accessories such as rings, bracelets, and necklaces before using the product to prevent the metal from falling into the hole and causing a short circuit. 14. Please make sure that the power is above 75% when you use it to start your car. 15. The product is only suitable for starting 12V gasoline and diesel vehicles. It may be dangerous if used for other purposes. Do not use it on equipment such as airplanes and ships. 16. This device can not power all 12V automotive products. Currently, it can only power some small automotive electronics, such as portable tire air pumps. 17. Please ensure that the blue end of the smart jump clamps is fully inserted into the product 12V car start port when you use it to start your car, otherwise, the blue end may melt. 18. Please use the jump clamps which come with the device only. When the battery clip or wire is damaged, please stop using it to avoid personal injuries such as fire and electric shock. 19. Do not use the clamps to power other equipment. 20. Before starting, make sure there is no rust and foreign matter at the interface, and tightly connect the device with the jump clamps. The non-tight connection will affect the starting performance of the device. 21. Do not use the device to start the car while it is being charged. 22. Do not use the device to continuously start the car more than 3 times. It may cause the product to overheat and damage product. Each starting should be separated by two minutes. 23. After successfully starting, please remove the product from the car battery within the 30s, otherwise it may cause damage. 24. Do not charge the device immediately after using it to start the car successfully. 25. Please charge it in the environment temperature between 0 45 . 26. Please use the comes with wall charger or the same specification charger to charge the device. 27. In extreme cases, the battery may leak. Do not touch the liquid directly with your hands or skin. If you accidentally touch it, rinse it off immediately with soap and water. If you accidentally get into your eyes, rinse your eyes with cold water for at least 10 minutes and seek medical attention immediately. 28. If the product battery leaks, please recycle it with the appropriate equipment immediately. 29. Lithium battery-based products should be disposed of according to local regulations at the end of the product’s life. WARRANTY The Warranty of this product is covered by TACKLIFE. At TACKLIFE, we aim to manufacture the best products that inspire our consumers to live a more convenient, secure lifestyle. We provide a 2-year warranty and lifetime technical support. If you need help, please contact us at any time, we will help you solve the problem within 24 hours. Contact us: support@autotacklife.com Website: www.tacklifetools.com Facebook: www.facebook.com/AutoTacklife
0689 Documents / Resources TACK LIFE T8 Pro Jump Starter [pdf] User Manual T8 Pro, Jump Starter References Manuals , home privacy
TACK LIFE T8 Pro Jump Starter User Manual merazun November 2, 2021November 3, 2021 Home » TACK LIFE » TACK LIFE T8 Pro Jump Starter User Manual User Manual Jump Starter Model: T8 Pro Thank you for choosing TACKLIFE T8 Pro smart car jump starter. Please read the user manual carefully before using it and keep it for further reference. Contents .
Activity 1: Jump Rope Progression - Practice your basic jump rope skills. Activity 2: Creative Mode Jump Rope Do as many jump tricks as you can. Activity 1: Jumping Tabata Challenge Activity 2: Ninja Warrior Jump Challenges Activity 1: Creative Mode Jump Rope Do as many jump tricks as you can. Activity 2: Create a jump rope routine
Paso Fino Tack TG 1. BITS All mouthpieces must be smooth or latex wrapped. The mouthpiece will consist of a metal bar 5/16" to 3/4" in . Dressage saddle-Legal in all classes requiring English Tack Legal in Pleasure and Western Pleasure with Western Tack and Attire TG 48.
jump rope Start with a forward jump (1st rotation). Swing rope to your R (2nd rotation) and rotate your body 180 to face backwards. Jump rope backwards once (3rd rotation). Swing rope to your R again (4th rotation) and rotate your body another 180 to face front again and jump. Challenges How many can you do in a row .
straddle the far rope. Jump out to the far side with both feet outside. c. Ons - go back to your starting side, facing the ropes and jump up and land with both feet on the first rope. Jump off of this rope and land on the two middle ropes with both feet. Now jump off the middle ropes and land on the far rope with both feet. Jump off this rope. d.
Read the following documents before using the PHANTOMTM 4 Pro / Pro : 1. In the Box 2. Phantom 4 Pro / Pro User Manual 3. Phantom 4 Pro / Pro Quick Start Guide 4. Phantom 4 Pro / Pro Series Disclaimer and Safety Guidelines 5. Phantom 4 Pro / Pro Series Intelligent Flight Battery Safety Guidelines
The jump rope was a Valeo Deluxe Speed Rope purchased from Amazon.com. The jump rope is made of rubber and comes with bearings. See Figure 4. Figure 4: 5The Valeo jump rope. Made from rubber, the jump rope had slight springback and tight packaging caused some bends along the length of th
Amp Jump Starter Jump Starter/Power Supply Kit 18,000 mAh Allstart 560 Boost Max 20’ 2-Gauge HD Jumper Cable 16’ 4 Gauge Battery Jumper Cables Allstart Boost Max Camo- 12 Volt Jump-starter/ 900 Peak Amps DSR ProSeries - Jump Starter -2200 Peak Amps/ 12V power outlet DSR128 - 2000 Peak Amp/ 12V Lithium Ion ProSeries Jump Starter w/ USB
RUSSIAN LANGUAGE The Honour course in Russian aims to develop a good active and passive command of correct spoken and written Russian for non-technical purposes, with some appreciation of different stylistic registers. This is done by means of regular obligatory classes in translation to and from Russian, instruction in writing essays in Russian, grammar classes as needed, and classes allowing .
