BarTender Barcode Printing Manual
BarTender Barcode Printing Manual M00027701 Rev. B Trademarks EPSON is registered trademarks of Seiko Epson Corporation in Japan and other countries./regions. BarTender is registered trademarks of Seagull Scientific, Inc. Copyright 2010-2012 Seiko Epson Corporation. All rights reserved. This manual explains the settings for using BarTender to print out bar codes with TM-C3400 When using BarTender to print out bar codes, the scale of the bar width and space width might change as shown below, making the bar code difficult or even impossible to read with a scanner. Therefore, first you will need to optimize the printer information for BarTender, and then set the bar code object to the recommended minimum values. Example: For Code128 Type C Barcode printed out with initial settings 㪍㪇㪍㪏㪎㪐 㪍㪇㪍㪏㪎㪐 Optimizing printer information (page 2) BarTender Ver.9.20 or later (page 2) BarTender Ver.9.10 or earlier (page 4) Barcode Object settings Barcode after resetting values (page 6) Barcode (page 6) 2D symbol of stack type (page 8) 2D symbol of matrix type (page 9) Caution: After optimizing the printer information, set the Barcode Object. You might not be able to set the recommended minimum value for the Barcode Object.
Optimizing printer information Install the TM-C3400, and then make the following settings. The optimization method varies according to the BarTender version. BarTender Ver.9.20 or later 1 2 Install the TM-C3400 printer driver on the computer. Set the printer driver according to the customer's usage conditions. The printer's resolution will vary according to the Media Type and Print Quality settings in the printer driver. Printer driver settings Print Quality Printer Resolution (dpi) Plain Media Speed 180 Plain Media Label Quality 360 Fine Media Speed 360 Quality 360 Media Type PET Film Synthetic Media Label 3 4 5 6 Click [OK] to exit the printer driver settings. Start BarTender. Use the New Label Format Wizard to set the media type. At that time, correctly select the printer you are using in [Printer Selection]. Select [Advanced Printer and Driver Setup] in the [Administer] menu to open the [Advanced Printer and Driver Setup].
7 Select the printer you are using, and then confirm that the Dot Size is set to the recommended value. See the table below. If it has been set to the recommended value, proceed to Step 10. If it has not been set to the recommended value, proceed to Step 8. Dot Size (mils) Resolution (dpi) Horizontal Vertical 180 8.3 8.3 360 4.2 4.2 8 Add a checkmark to [Override Default Settings]. 9 Set [Dot Size]. Refer to the recommended values in the table below and then click the [arrow] to make a setting. Dot Size (mils) Resolution (dpi) Horizontal Vertical 180 8.3 8.3 360 4.2 4.2 10Click the [OK] button. This completes the BarTender optimization settings.
BarTender Ver.9.10 or earlier 1 2 Install the TM-C3400 printer driver on the computer. Set the printer driver according to the customer's usage conditions. The printer's resolution will vary according to the Media Type and Print Quality settings in the printer driver. Printer driver settings Print Quality Printer Resolution (dpi) Plain Media Speed 180 Plain Media Label Quality 360 Fine Media Speed 360 Quality 360 Media Type PET Film Synthetic Media Label 3 4 Click [OK] to exit the printer driver settings. Use Notepad to open the btwprn.ini file that was created when BarTender was installed. The save location for btwprn.ini is shown below. Windows XP/ Windows Server 2003 : C:\Documents and Settings\All Users\Application Data\Seagull\BarTender Windows Vista/ Windows 7/ Windows Server 2008 : C:\ProgramData\Seagull\BarTender
5 Refer to the following regarding resolution, and then edit and overwrite the file as necessary. Caution: The EPSON TM-C3400 " remark in the btwprn.ini file is added when the TM-C3400 printer driver is installed. Functions that allow the setting of multiple resolutions for a single printer with BarTender cannot be used with TM-C3400. If the printer's resolution changes due to the settings used for the TM-C3400 printer driver, you must edit the btwprn.ini file as necessary each time. Edit only the locations enclosed in a red frame. For 180 dpi For 360 dpi This completes the BarTender optimization settings.
Barcode Object Settings Set the Barcode Object created in BarTender according to the customer's usage conditions, using the values shown below. Caution: Before setting the Barcode Object, make sure that the printer information has been optimized. You might not be able to set the recommended minimum value for the Barcode Object. Barcode Symbology Code39 / Codabar / Interleaved 2-of-5 / JAN13 / Code93 / Code128 Printer driver settings Printing direction *1 Media Type Print Quality Printer Resolution (dpi) Plain Media Fence Barcode Plain Media Label Speed 180 8.3 *2 13.9 *3 360 9.8 Plain Media Plain Media Label X Dimension (mils) Ratio 13.9 Other than the above Ladder Barcode BarTender settings (Recommended minimum values) 19.4 Speed Other than the above 180 13.9 *2 19.4 *3 360 12.5 2.5
*1 The printing directions are shown below. Feed direction 606879 㪍㪇㪍㪏㪎㪐 Fence Barcode Ladder Barcode *2: Code39, Codabar, Interleaved 2-of-5 (Binary-level Barcode) *3: JAN13, Code93, Code128 (Multi-level Barcode) Note: The values shown above are for the recommended print media.
2D Symbol of Stack type Symbology PDF417/ GS1 DataBar Stacked/ GS1 DataBar Stacked Omnidirectional, /GS1 DataBar Expanded Stacked Printer driver settings Media Type Print Quality Printer Resolution (dpi) BarTender settings (Recommended minimum values) X Dimension (mils) Plain Media Speed 180 8.3 Plain Media Label Quality 360 7.0 Other than the above 360 7.0 Note: The values shown above are for the recommended print media. Row Height 3X
2D Symbol of Matrix type Symbology QR Code Printer driver settings Symbol position * Media Type No Paper feed Print Quality X Dimension (mils) Speed 180 19.4 Plain Media Label Quality 360 18.1 360 15.3 Plain Media Speed 180 25.0 Plain Media Label Quality 360 23.6 360 18.1 Other than the above *) BarTender settings (Recommended minimum values) Plain Media Other than the above With Paper feed Printer Resolution (dpi) You can use the Print Preview function in the printer driver to make sure that the symbol does not fall outside of the printing area. For details, see "Symbol Printing Position" on page 10. Note: The values shown above are for the recommended print media.
Symbol Printing Position The value to set for [X Dimension] will vary depending on whether the symbol printing position falls outside of the printing area. Use the following procedure to check the symbol printing position. 1 2 Add a checkmark to [Print Preview] in the TM-C3400 printer driver, and then click the [OK] button. When printing, the [EPSON Print Preview] window will appear. The dashed lines shown here indicate the printing area. Check if the symbol position falls inside or outside of the printing area. No Paper feed (Inside the printing area) With Paper feed (Outside the printing area )
Barcode Object Settings Set the Barcode Object created in BarTender accord ing to the customer's usage conditions, using the values shown below. Caution: Before setting the Barcode Object, make sure t hat the printer information has been optimized. You might not be able to set the recommended minimum value for the Barcode Object. Barcode Symbology
industrial label printers. But today, BarTender is much more than just label software. With RFID, print and encode support for smart cards, powerful drawing features, and a robust suite of companion applications, BarTender is a truly complete design and print solution. The World's Leading Software for Label, Barcode, RFID & Card Printing
A bartender was upset about that waitresses did not have to share tips with him even though he helped serve food Bartender complained about this policy to another bartender, who agreed it “sucked”. Neither bartender raised this issue with man
5.2.1 Insert Barcode in Word 2003 using the Menu 11 5.2.2 Insert Barcode in Word 2003 using the Control Toolbox 12 5.3 Microsoft Office 2007 12 5.3.1 Insert Barcode in Word 2007 12 5.3.2 Insert Barcode in Excel 2007 13 5.3.3 Insert Barcode in Access 2007 14 5.4 Microsoft Office 2010 / Office 2013 / Office 2016 15 5.4.1 Insert Barcode in Word .
KDC270Li 1D Laser Bluetooth Barcode Scanner KDC270Di 1D CCD Bluetooth Barcode Scanner KDC270Ci 2D Imager Bluetooth Barcode Scanner Basic Operation 1. Aim the KDC directly at the barcode and press the SCAN button, ensuring the beam covers the barcode horizontally. 2.
33. New Barcode/Spine Label Format 33.1. Catalog Barcode Spine Label Spine/Barcode/Barcode 3X10 33.1.1. New label layout Spine/Barcode/Barcode 3X10 has been added to the system. 33.1.2. Please Note: Left margin should be set at 0.07 in order to print properly. 34. Collection Count Window 34.1. Catalog Cataloging Collection Count 34.1.1.
DataMatrix Barcode 1. DataMatrix Barcode 1.1 DataMatrix Barcode DataMatrix is a two-dimensional matrix symbology made up of square modules arranged in a square or rectangle shaped pattern. This barcode can pack large amount of data and has the capability of recovering the original data encoded even when it is partially damaged through an
during barcode verification testing. [1] Barcode A symbol that encodes data into a machine-readable pattern of adjacent, varying width, parallel, rectangular dark bars and pale spaces. [1] Barcode verification The assessment of the printed quality of a barcode based on ISO/IEC standards using ISO/IEC compliant barcode verifiers. [1] Batch - lot
with API 650’s level of risk of tank failure. Likewise, the rules in the external pressure appendix will be consistent with the basic part of API 650 with regard to loading conditions and combinations. Thus, starting with a specified design external pressure, roof live or snow load, and wind pressure (or velocity), the total roof design pressure is calculated as the greater of DL (Lr or S .
