Catalogue 2014 June - CSS
CONTENTSPAGE1Wiring Channels, Trunking and Covers2-3Channel Accessories4PVC Trunking and Accessories5PVC Trunking and Accessories Continued6Light Duty Cable Trays and Accessories7Medium and Heavy Duty Cable Trays and Accessories8Wire Mesh Cable Trays and Accessories9Return Flange Cable Tray10-11CS Series Cable Ladder and Accessories12Strong Span13Cantilever ArmsFixing Brackets (Brackets, Base Plates & Beam Clamps) 14-1516Cable and Pipe Clamps17Pipe Hangers and Fasteners18Power Skirting: 4, 3, 2, or Single Compartments19Switching Accessories20Under Floor Box and Aluminium Service Pole21Pedestals22Caddy Clips, Clamps and Fixings23Typical Frame Support System24Structural Design Data
WIRING CHANNELS, TRUNKING AND COVERSReference No:Material Thickness in mmMass kg/mStandard Lengths in MetersDimension in mmCS 10002.53.0541,3 x 41.3CS 33002.51.8541,3 x 20.6CS 20001.61.0541,3 x 41.3CS 40001.61.3541,3 x 20.6CS 11840.60.52.5Reference No:Material Thickness in mmMass kg/mStandard Lengths in MetersDimension in mmCS 80000.82.1376.2 x 76.2*CS 83000.81.9376.2 x 63.5CS 82000.81.7376.2 x 50.8CS 81000.81.5376.2 x 25CS 81840.60.83Reference No:Material Thickness in mmMass kg/mStandard Lengths in MetersDimension in mmCS 90000.81.93127 x 76.2CS 91840.61.53*CS 22000.81.62.450.8 x 50.8* NOTE:B) See CS 2200 Trunking -the 20 mm knockouts areA) See CS 8300 Trunking - knockouts only fit 3 pin 5spaced at 152 mm centers, staggered.amp plug sockets. Knockouts are placed at 1500 mmcenters, staggered.Ex-Stock channels and trunking are finished “Galvanized”Ex-Stock covers are finished “Galvanised” and PVC (White or Grey)1
CHANNEL ACCESSORIESInternal ElbowExternal ElbowInternal SpiceTee4 WayHorizontal ElbowFlange HangerPurlin Hanger2End Cap
CHANNEL ACCESSORIESRadiused TeeRadiused Horizontal ElbowRadiused Horizontal Elbow with CoverRadiused Tee with CoverRadiused Internal ElbowRadiused External ElbowRadiused Ext Elbow with CoverDistribution OutletRadiused Distribution OutletRadiused Internal Elbow with CoverRadiused 4-WayChannel HangerRadiused 4-way with Cover20mm Brass Fluorescent Adaptor20mm Nylon Fluorescent Adaptor3
PVC TRUNKING AND ACCESSORIESCOMPACT MINIATURE TRUNKING162525161625YT 2YT 14040251640YT 2/140YT 4YT 3YT 5SINGLE COMPARTMENT - YTREFERENCE NODIMENSION IN mmSTANDARD LENGTHSYT 1YT 2YT 2/1YT 3YT 4YT 516 X 1625 X 1625 X 2540 X 1640 X 2540 X 402M3M3M3M3M3MTWIN COMPARTMENT - ZTREFERENCE NODIMENSION IN mm40 X 253M4025STANDARD LENGTHSZT 4CORNERTRUNKINGZT 4COMPACT TRUNKINGSINGLE COMPARTMENTREFERENCE NODIMENSION IN mmSTANDARD LENGTHSNBT /4NBT /5100 X 40100 X 503M3M40010NBT/450010NBT/5TWIN COMPARTMENTCOLOUR“WHITE”REFERENCE NODIMENSION IN mm40STANDARD LENGTHS1004NBT /4 /TC100 X 403M
PVC TRUNKING AND ACCESSORIES CONTINUEDINDUSTRIAL CABLE TRUNKING (SINGLE COMPARTMENT ONLY)75505050CLT 1CLT 275CLT 3751007550CLT 4CLT 5100CLT 6100100STANDARD COLOUR GREY - ALSO AVAILABLE ON REQUEST IN WHITEREFERENCE NO.DIMENSION IN mmSTANDARD LENGTHSCLT 1CLT 2CLT 3CLT 4CLT 5CLT 650 X 5075 X 5075 X 75100 X 50100 X 75100 X 1003M3M3M3M3M3MHALF MOON TRUNKING131848703 COMPARTMENT2 COMPARTMENT5
LIGHT DUTY CABLE TRAYS AND ACCESSORIESSTRAIGHT LENGTHWIDTHSIZEmmHEIGHT TURN UP OFEACH 1919STANDARD LENGTH:SLOT SIZE:3M25 X 6.5 mmNOTE: TRAY SPLICED BY OVERLAPPINGENDS, FIXED WITH GUTTER BOLTSAND NUTSHORIZONTAL BEND4-WAYEXTERNAL BENDTEEINTERNAL BEND6
MEDIUM & HEAVY DUTY CABLE TRAYS & ACCESSORIESMEDIUM DUTYCABLE TRAYWIDTHSIZEmmHEIGHT TURN UP OFEACH SIDEmm7611415222830445760938383838383838STRAIGHT LENGTHMEDIUM VS HEAVY DUTYSTANDARD LENGTHS - 3 METERSSLOT SIZE 25 X 11 mmHEAVY DUTYCABLE TRAY4-WAYWIDTHSIZEmmHEIGHT TURN UP OFEACH SIDEmm7611415222830445760976767676767676HEAVY DUTY TRAYTEEEXTERNAL BENDSTANDARD LENGTHS - 3 METERSSLOT SIZE 25 X 11 mmSPLICE SET(A) 2 X Angle Splices, 8 x M10 x20mm Mushroom head screwsand nutsMedium Duty Angle Splice(B)1 x Centre Splice, 4 x M10 x20mm Mushroom head screwsand nuts(A)HORIZONTAL BENDNOTE:1.Splice set (B) is supplied fortrays 457mm width and wider.2.The width of medium and heavyduty cable tray is reduced bymeans of reduction splices.TRAYS & ACCESSORIESREQUIRE THE FOLLOWINGSPLICE SETS:Straight, Bend, Internal Bend, ExternalBend and Reducers: - 1 x (A) 1 x (B)Tee: - 2 x (A) 2 x (B)4 way : - 3 x (A) 3 x (B)Heavy Duty Angle Splice(B)Center Splice - Med & HeavyINTERNAL BENDReduction Splice - Med & Heavy7
WIRE MESH CABLE TRAYS AND ACCESSORIESCS 50 & CS 75 SERIES - STEEL MESH CABLE TRAYSŸŸŸŸŸ3000 mm (3 m) Standard LengthPitch 100 x 50 mm, and 50 x 50 mmStandard finish - Hot Dip Galvanised (HDG)Hold down Saddle and Joiner Clamp Set GalvanisedOther material and finishes on request.MEDIUM DUTY CABLE TRAY (WMMD)WIDTHSTRAIGHT IRE:4mmSIDEWALLS: 2 LONGITUDINAL WIRES AT 25mmCENTERSHEAVY DUTY CABLE TRAY 915.919.9HEIGHT:75mmWIRE:5mmSIDEWALLS: 3 LONGITUDINAL WIRES AT 25mmCENTERS4-WAYCLIP-ON SUPPORT CHANNEL HORIZONTAL OR VERTICAL INSTALLATIONEXTERNAL BEND NO SADDLES REQUIRED BEND OVER TABS TO SECURE 1200 mm STANDARD LENGTHHORIZONTAL BENDMATERIAL THICKNESS:1.6 mmMASS Kg/ 1200 mm1.2 KgHOLD DOWN BRACKETINTERNAL BENDSPLICE CLAMP, WASHER,CUP SQUARE BOLT AND NUTNOTE: STANDARD ACCESSORIES HAVE A 450 mm INTERNAL RADIUS8
RETURN FLANGE CABLE TRAYRFMD - RETURN FLANGE MEDIUM DUTYTEEHORIZONTAL BENDMATERIAL THICKNESS:WIDTHSTRAIGHT TRAYSTANDARDACCESSORIES50 - 225 mm300 mm450 mm600 mm750 mm900 mm1.0 mm1.2 mm1.5 mm1.5 mm1.5 mm1.5 mm1.0 mm1.2 mm1.2 mm1.2 mm1.5 mm1.5 mm4-WAYINTERNAL/ EXTERNAL BENDMASS 711.4SLOT DIMENSIONS:25 X 7.5 mm FOR LONGITUDINAL SLOTS AND 20 X 11 mm FOR LATERAL SLOTSFASTENERS: M6 X 16 CUP SQUARE SCREW NUT FLAT WASHERSRFHD - RETURN FLANGE HEAVY DUTYSPLICESOPEN HANGER9
CS SERIES CABLE LADDER AND ACCESSORIESCS 55 “LIGHT DUTY” CABLE LADDERSHOWS APPLICATION OF WALL SUPPORT CHANNELAND CANTILEVER ARMLOADINGEX STOCK CABLE LADDER IS MANUFACTUREDFROM 1.6 mm GAUGE STEEL AND THEN FINISHEDHOT DIP GALVANISED.120 KG’S SUPPORTED AT 1500 mm CENTERSUNIFORMLY DISTRIBUTED.A - 55 mmB - 100, 150, 200, 300, 400, 500 mmC - 3000 mmCS 76 “MEDIUM DUTY” CABLE LADDERSHOWS APPLICATION OF WALL SUPPORT CHANNELAND CANTILEVER ARMLOADINGA - 76 mmB - 100, 150, 200, 300, 400, 500,600, 800, 1000 mmC - 3000 mmEX STOCK LADDERACK IS MANUFACTUREDFROM 1.6 mm GAUGE STEEL AND THEN FINISHEDHOT DIP GALVANISED.230 KG’S SUPPORTED AT 1500 mm CENTERSUNIFORMLY DISTRIBUTED.B10A - 76 mmB - 100, 150, 200, 300, 400, 500, 600, 800,1000 mmC - 3000 mm
CS SERIES CABLE LADDER AND ACCESSORIESACCESSORIES4 ENDREDUCTION SPLICEADJUSTABLE SPLICENOTE: STANDARD ACCESSORIES HAVE A 450 mm INTERNAL RADIUSA - LADDERACKB - TEEC - 4 WAY CROSSOVERD - EQUAL REDUCERE - HORIZONTAL ELBOW 90 F - INTERNAL RISERG - DOUBLE CANTILEVER ARMH - SINGLE CANTILEVER ARMI - ADJUSTABLE SPLICEJ - CLAMP OR STRAPPINGK - SPLICE11
STRONG SPANSS 75 & SS 100SS 75STRAIGHT LENGTHREFERENCE NO:SS 75RUNG SPACING300 mmSTANDARD LENGTHS INMETERS3 MetersSLOT SIZE25 x 7 mmCROSS RUNG2 mmMATERIALSide Rail 2 mm(3 mm Side Rail to ORDER)WIDTH1508001000MASSKG/3M15.1 15.7 17.1 18.4 19.7 21.1 23.726.4200300400500600EXTERNAL BENDSS 100REFERENCE NO:SS 100RUNG SPACING300 mmSTANDARD LENGTHS INMETERS3 MetersSLOT SIZE25 x 7 mmCROSS RUNG2 mmMATERIALSide Rail 2 mm(3 mm Side Rail to ORDER)HORIZONTAL BENDINTERNAL BENDWIDTH1508001000MASSKG/3M17.5 18.7 19.5 20.8 22.1 23.5 26.128.8200300400500600TEESPLICE SET16 nuts and bolts needed(8 per side)12
CANTILEVER ARMSRF ARMReference No.CS 150CS 229CS 305CS 381CS 457CS 610Material thickness in mm2 mm2 mm2 mm2 mm2 mm2 mmStandard lengths in mm152229305381457610223 SERIESMade to OrderMaterial thickness in mm 2.2 mm 2.2 mm 2.2 mm 2.2 mm 2.2 mm 2.2 mm 2.2 mmStandard lengths in mm150200250350450550650Wrap aroundarmsFULL DOUBLE ARMSMaterial thickness in mm2.2 mm2.2 mm2.2 mmStandard lengths in mm6508501050STAGGERED ARMSMaterial thickness in mm2.2 mm2.2 mm2.2 mmAStandard lengths in mm (A)6508501050Standard lengths in mm (B)250300350BSINGLE ARMS - 254 SERIESMaterial thickness in mm 2.2 mm 2.2 mm 2.2 mm 2.2 mm 2.2 mm 2.2 mm 2.2 mmStandard lengths in mm150200250350450550PIERCED CHANNEL - CS 1000TDOUBLE CHANNEL - CS 100113650
PRE-PACKAGED AIRCON SETS450mm SLOTTED CANTILEVER ARM AIRCON SET COMPRISES OF:2 x SLOTTED C/L ARMS (FPA TYPE) 450mm LENGTH x 1.6mm (CS 2000 ARM)BACK PLATE: 150mm x 45mm x 6mm - EPC2 x BACKING CHANNEL 41mm x 41mm x 2.0mm THICK (CS 1000) x 250mm LONG - EPC4 x M8 x 65mm SHIELD ANCHORS4 x M8 x 30mm HEX SET SCREWS - EG4 x M8 LONG SPRING NUTS - EG650mm SLOTTED CANTILEVER ARM AIRCON SET COMPRISES OF:2 x SLOTTED C/L ARMS (FPA TYPE) 650mm LENGTH x 2.0mm (CS 1000 ARM)BACK PLATE: 150mm x 45mm x 8mm - EPC2 x BACKING CHANNEL 41mm x 41mm x 2.0mm THICK (CS 1000) x 250mm LONG - EPC4 x M10 x 75mm SHIELD ANCHORS4 x M8 x 30mm HEX SET SCREWS - EG4 x M8 LONG SPRING NUTS - EGSTANDARD COLOUR IS EASTER OAK - OTHER COLOURS AVAILABLE ON REQUESTHOT DIP GALVANIZED AVAILABLE EX STOCKBACKING PLATECANTILEVER ARMSBACKING CHANNELSPRING NUTSHEX SET SCREWSSHIELD ANCHORS
FIXING BRACKETS(Brackets, Base Plates & Beam Clamps)FLAT PLATE BRACKETS137891843889CS 1062 - 8mmCS 1063 - 10mmCS 1064 - 12mmCS 1031CS 1065CS 1067137898913713789137CS 1028CS 1066CS 1358CS 103689504741.3NINETY-DEGREE ANGLE BRACKETS10510CS 1026CS 1326CS 132589CS 1068557105CS 2484 REPLACES CS 1331 AND CS 1332CS 135914
FIXING BRACKETS89787620.641.3‘Z’ SHAPED BRACKETSANGULAR BRACKETS955489CS 1546-45CS 1186-45CS 1045CS 404520.6‘U’ SHAPED BRACKETS41.31378313879913137CS 2346CS 1737CS 1047CS 404741.38941.341.3ANGLE BRACKETS41.389137CS 1033CS 1034CS 10358999675748619551SLOTTED BRACKETSBA89CS 1749CS 1130 1A8 1B2CS 1130 168 102CS 1131 219 152CS 1713CS 17473810238BASE PLATESCS 2072-S1210210203CS 2073/ABEAM CLAMPS45893289CS 1272CS 12711538CS 1796
CABLE AND PIPE CLAMPSREF NO.CS 1000 CHANNELLADDERACK CROSS RUNG“K” CLAMPLADDERACK CROSS RUNGANGLE IRON“U” WO PIECE CLAMP FOR CLAMPING VERTICAL, HORIZONTAL CABLE OR PIPE RUNSPART NO.DESIGN LOAD SAFETY FACTOR OF 5BOTTOM MOUNTINGTRAPEZE HANGERDOUBLE TRAPEZEHANGERTOP ESIGNLOADCS 2026CS 2027CS 2028CS 1111CS 203011.3 - 13.513 -1716.5 -19.519 - 2321 -30M 6 X 20Gutter Bolt& Nut1.5 mm180 KgCS 1112CS 1113CS 111424 -2932 - 3638 - 44M 6 X 25Gutter Bolt& Nut2.0 mm270 KgCS 1115CS 2038CS 1117CS 2043CS 1118CS 111943 - 5747 - 5754 -7062 -7571 - 8587 - 95M 8 X 35HSS & Nut2.5 mm360 KgCS 1120CS 1121CS 1122CS 112399 - 110110 -122116 - 140135 - 145M10 X 50HSS & Nut2.9 mm450 KgCS 1124CS 1125CS 1126CS 1127CS 1129155 - 180175 - 206188 - 228235 - 270260 - 285M10 X 60HSS & Nut3.3 mmDOUBLE MOUNTING16
PIPE HANGERS AND FASTENERSCS 75 SERIES PIPE HANGERPART NO.CS 75/15CS 75/20CS 75/25CS 75/30CS 75/40CS 75/50CS 75/60CS 75/80CS 75/100CS 75/125CS 75/150CS 75/200BASUITABLE FOR HANGING OF:PLUMING, DRAINAGE ANDSPRINKLER PIPES ETC.DIAGRAMA mm2127344248607689114140166219DIAGRAMB mm6570758090100120160200250300400CLAMPING NUTSSPRING NUTS FOR CS 1000 - CS 2000CHANNELS AND CS 32/ CONCRETE INSERTSSTRENGTH OF CS 1 M12 NUTS USED IN CS 1000SPRING NUTS FOR CS 3300 - CS 4000CHANNELS AND CS 42/ CONCRETE INSERTS* Resistance to slip - 350KG per bolt* Pull-out strength - 700Kg safe tension load per bolt* Safety Factor of 2METRIC SIZESPART NO.METRIC SIZESPART NO.CS 1 M6CS 1 M8CS 1 M10CS 1 M12CS 4 M6CS 4 M8CS 4 M10CS 4 M12SCREWS, NUTS AND WASHERSFULLY THREADED RODSRAWL BOLTMETRIC SIZESM6 X 3 MetersM8 X 3 MetersM10 X 3 MetersM12 X 3 Meters17DROP IN ANCHORCOUPLER NUT
POWER SKIRTING: 4, 3, 2, OR SINGLE COMPARTMENTSTANDARD COLOURS:Easter Oak, Hammertone Grey, Hospital Grey, CarrierBeige, Motorcraft Grey, Textured White & Texturedsemi Matt BlackCS 801 DOUBLE COMPARTMENT165DIVIDER AVAILABLEON REQUEST5590CS 802 SINGLE COMPARTMENT5524424455DIVIDER AVAILABLEON REQUESTCS 803 & CS 804 - THREE & FOUR COMPARTMENT55CS 803 CS 804POWER SKIRTING ACCESSORIESFLATBENDEND CAPCS 801 WITHEND CAPCS 803/4 WITHEND CAPCS 802 WITHFLAT BENDCS 802 WITHEND CAP18FLATTEEHORIZONTALBENDCS 801 WITHTEECS 803 WITHHORIZONTALBEND
ECO SKIRT PVC POWER SKIRTINGECO SKIRT - ECO/1 SERIES WITH ACCESSORIESECO SKIRT SINGLEFIXED YOKE OUTLETUNIVERSAL TWIN OUTLETS5590COVEREND CAPINTERNAL/ EXTERNAL BENDECO SKIRT - ECO/2 SERIES WITH ACCESSORIES55INTERNAL/ EXTERNAL BENDEND CAP165INTERNAL/ EXTERNAL BENDHOW TO MAKE 3 COMPARTMENTS
ALUMINIUM SKIRTINGALUMINIUM SKIRTING DOUBLE COMPARTMENT AND ELBOW55DOUBLE COMPARTMENT WITH END CAP165EXTERNAL ELBOWSIDE VIEWALUMINIUM SKIRTING SINGLE COMPARTMENT AND ELBOW5590SINGLE COMPARTMENTSIDE VIEWCOVER
SWITCHING ACCESSORIESCLIPSALLS 2000 CRADLE S2032PSCCRABTREECLASSIC16A SSO - 6896HCRABTREEDIAMONDDATA POINT - 11894TEL POINT - 11815NORMAL SWITCH - 11901BLANK - 1190016A DEDICATED SSO RED - 6896HDLS 2000 16A SSO WHITEDEDICATED SWITCH: AVAILABLE COLOURS16A DEDICATED SSO BLACK - 6896HD16A SO WHITE - 11915LS 2000 16A DEDICATED SSO RED16A DED SO RED - 1145116A DEDICATED SSO BLUE - 6896HD16A DED SO BLUE - 11457 16A DED SO BLACK-11454LS 2000 16A DEDICATED SSO BLACK13A SSO - 4556H13A SO MOD - 11940SHUKO SO MOD - 11459LS 2000 16A DEDICATED SSO BLUE20A DPI AND CORD GRIPEURO SO MOD - 11850LS 2000 TEL MODULERJ 11LS 2000 DATA MODULERJ 453 MOD YOKE - 1100019
UNDER FLOOR BOX AND ALUMINIUM SERVICE POLEPOLES ARE AVAILABLE IN STANDARD LENGTHS OF 3, 3.5, 4.0 AND 4.5 METERS.KITS COMPRISE OF THE POLE COMPLETE WITH PVC COVERS, FLOOR PAD, CEILING FLANGE AND JACKASSEMBLY. FINISHED IN A NATURAL ANODISED ALUMINIUM WITH GREY PVC COVERS.POWER BOXALUMINIUM SERVICE POLE20
FLOOR PEDESTALSLEGRAND POP UP PEDESTALSLEGRAND SINGLEPOP UP PEDESTALCRADLE0 540 00LEGRAND SINGLEPOP UP PEDESTALCOMPLETE0 540 10012120023LEGRAND DOUBLEPOP UP PEDESTALCRADLE0 540 02120LEGRAND DOUBLEPOP UP PEDESTALCOMPLETE0 540 124 MOD AND 8 MOD POP UP PEDESTALS ARE AVAILABLE ON REQUESTFLOOR PEDESTALSF6 AND F9 - SINGLE AND DOUBLE PEDESTALSFD 6 SINGLE AND FD 6 DOUBLEPEDESTAL015UNDERFLOOR DUCTING AVAILABLE ON REQUEST2100DRAW BOXPRE-GALVANZIEDSHEET1515FD 9 SINGLE AND FD 9 DOUBLEPEDESTAL230
CADDY CLIPS, CLAMPS AND FIXINGSFLANGEHANGERCHANNEL SPACING DEFLECTION CHANNEL SPACING 7161000600025CADDY CLIPSCODEBC153-RH6TAmm1.5 - 3BC38-RH6T3-8BC814-RH6T8 - 14BC1420-RH6T14 - 2068KgCODEVF155RH6TVF57RH6TAmm1.5 - 55-7Availablefor 6mm,8mm,10mm,12mmThreadedRodAvailable for 6mm, 8mm,10mm, 12mm Threaded RodCABLE RUN CLIPS70Kg (160lbs)700NAmmVF155 1.5 - 5CODEVF5768KgCODEFmmDmmSizes from- up toSizes from- up toSizes from- up toCRSCRMCRL5-72 - 4 mm 4.5 - 32 mm4 - 7 mm 4.5 - 32mm8 - 12 mm 4.5 - 32 mmAmmBC153 1.5 - 33-8BC 388 - 14BC81414- 20BC1420CODE22REFA mm-333333B 8-LCC3240BC38-LCC4047BC38-LCC4757333333-88888812 - 1919 - 2626 - 3232 - 4040- 4747 - 4141414-20202020202012 - 1919 - 2626 - 3232 - 4040- 4747 - 57-192632404757192632404757
TYPICAL FRAME SUPPORT SYSTEMEASY AS A, B, C .WEDGE SHAPED IN-TURNEDEDGES TO TAKE SERRATEDGROOVES OF SPRING NUTASSEMBLE FITTING, NUT ANDBOLT - A TURN OF THE WRENCHAND IT’S DONE.ROUNDED EDGES OF NUT PERMITEASY INSERTION, SPRING (YOURTHIRD HAND) HOLDS NUT SNUGLYIN PLACE FOR BOLTINGSERRATED GROOVES “BITEINTO” IN-TURNED EDGES OFCHANNEL FOR POSITIVECLAMPING ACTIONThe Cross Section of the nut and screw assemblyshows how a strength-adding box section is formed.NOTE:-The bolt is not directly in shear, adding extrasecurity.NUT ASSEMBLYThe spring below the nut conveniently holds thenut in position for easy bolting. The teeth on thetop of the cyanide hardened nut bite into theclamping flange in the channelled framing member- ensuring firm, positive fixing.INSERT NUT ANYWHEREALONG CONTINUOUSSLOT OF CHANNELGENERAL SPECIFICATIONMATERIAL:Spring nuts are manufactured from steel bar, afterall Machining Operations are completed, they arethoroughly cyanide hardened. Hardening assurespositive biting action into the in-turned edge ofthe channel.FINISHES:All nuts and screws are zinc plated 252612131427THREAD:All Threads on the nuts and screws are metric.1CS 8200 CHANNEL C/W WHITE PVCCOVER15CS 8300 CHANNEL C/W PG COVER2CS 2200 CHANNEL C/W PG COVER16CS 8000 CHANNEL C/W GREY PVCCOVER3CS 4000 CHANNEL17CS 9000 CHANNEL4M10 X 35mm HEX SET SCREW188mm FENDER WASHER51068 ANGLE BRACKET19CS 8200 CHANNEL WHITE C/WWHITE PVC COVER6CS 2000 1 mm SUPPORT CHANNEL20GS 75 100mm HEAVY DUTY WIREMESH E/ ORANGE 100/50APERTURE7R/FLANGE MEDIUM DUTY 50mmTRAY21CLT 3 PVC INDUSTRIALTRUNKING GREY8R/FLANGE HEAVY DUTY 100mmTRAY22WIRE MESH HOLD DOWN SADDLE9CS 2000 1.6 mm SUPPORTCHANNEL23CS 1000 SLOTTED CHANNEL10LIGHT DUTY CABLE TRAY 152 mm24GS 50 50mm WIRE MESH 50/50APERTURE11GS 50 100mm WIRE MESH50/50APPERTURE25GS 50 100mm WIRE MESH 100/50APERTURE121062 SQUARE WASHER26HEAVY DUTY CABLE TRAY 76mm13CL 76 100mm CABLE LADDER27MEDIUM DUTY CABLE TRAY76mm14CL 55 200mm CABLE LADDER282072/S1 BASE PLATE2823
STRUCTURAL DESIGN DATABEAMLOADS:Allowable uniformly distributed loads are listed for various simple spans. That is, beam on two supports. If load isconcentrated at centre of span, multiply load from table by 0,5 and corresponding deflection by 0,8.WORKING STRESS: 135 N/mm:Recommended for use where deflection is not a factor on long spans.DEFLECTION:This is the vertical displacement of a product under load, measured on the flanges at mid-span. Deflection under load isnot directly related to the strength of the product but visually it is of obvious aesthetic importance and for this reasonmay well be a principal design criterion. Deflection is directly proportional to the applied load, thus doubling the load,will double the consequent deflection. Anyload will, if applied at one cause approximately twice the product deflectionELEMENTS OF SECTION:that it would if the load were uniformly distributed along a complete span.Span/200 - Recommended for use when deflection is a factor.COLUMN LOADS:Column loadings are for allowable axial loads for the unsupported heights listed. If loads are eccentric, loads should bereduced according to Standard Practice.Strength of M12 Spring Nuts used in CS 1000Resistance to slip 360 Kg per boltPull Out Strength - 720 kg per holtMinimum Safety Factor of 2.AXIS X - XAXIS Y - YPRODUCTMASSKG/mAREA OF SECTION(cm2)I (cm4)Z (cm3)r (cm)I (cm4)Z (cm3)r (cm)CS 1000CS 1001CS 1001 -C41CS 2000CS 3000CS 1.55I - MOMENT OF INERTIABEAM SPAN ORCOLUMNUNSUPPORTEDPRODUCTHEIGHT(mm)Z - SECTION MODULUSUDL (kg) DEFLECTIONMAXIMUM BEAM SPAN OR PRODUCT UDL (kg) DEFLECTION UDL (kg)UDL (kg)UDL (kg)UDL (kg)AT(mm) ATLOADINGWHENWHENWHENCOLUMNAT(mm) ATWHENWORKING WORKING DEFLECTION DEFLECTIONOFUNSUPPORTEDWORKING WORKING DEFLECTION HT SPAN/200SPAN/350SPAN/350(kg)(kg)250CS 1000CS 1001CS 1001-C41CS 2000CS 3000CS 5632500CS 1000
Reference No. CS 150 CS 229 CS 305 CS 381 CS 457 CS 610 Material thickness in mm 2 mm 2 mm 2 mm 2 mm 2 mm 2 mm Standard lengths in mm 152 229 305 381 457 610 CANTILEVER ARMS. PRE-PACKAGED AIRCON SETS 2 x SLOTTED C/L ARMS (FPA TYPE) 450mm LENGTH x 1.6mm (CS 2000 ARM) BACK PLA
CSS Colorvalues CSS Colornames CSS Tutorial « W3Schools Home Next Chapter » Save a lot of work with CSS! In our CSS tutorial you will learn how to use CSS to control the style and layout of multiple Web pages all at once. CSS Example body {background-color:#d0e4fe;} h1 {color:orange; text-align:center;} p {font-family:"Times New Roman"; font .
Mar 03, 2010 · Tantek Çelik's CSS Examples CSS mastery: advanced web standards solu tions by Andy Budd "CSS Mastery" is available online from Harvard University Libraries . Examples are used from Tantek Çelik's CSS Examples by permission under a Creative Commons License CSS only for "modern" browsers: @import "null.css?\"\{"; @import "for_current_browsers.css";
Exercises SUMMARY Chapter 18—Styling XML with CSS The Rise and Fall of the Style Language Cascading Style Sheets XML, CSS, and Web Browsers XML, CSS, and Internet Explorer XML, CSS, and Mozilla Getting Mozilla Displaying XML Code in Mozilla Cheating Embedding CSS in XSL CSS Style Sheet Properties Units Specifying CSS Properties Classes
A brief history of CSS CSS 3 is divided into several separate documents called "modules" and its notes are posted on W3C: css3-background CSS Backgrounds and Borders Module Level 3 Candidate Rec. Oct 2017 css3-box CSS basic box model Working Draft Jul 2018 css-cascade-3 CSS Cascading and Inheritance Level 3 Candidate Rec. May 2016
5 CSS Essentials, Part 2 CSS Essentials, Part 2 6 Managing Text Flow by Using CSS CSS 7 Managing the Graphical Interface by Using CSS Interface by Using CSS 8 Understanding JavaScript and Coding Essentials Understanding JavaScript and Coding Essentials 9 Creating Animations, Working with Graphics, and Accessing Data Creating Animations,
Tags:css media query, css media query examples, css media query for ipad, css media query for mobile, css media query value defined in the query. max-width Rules applied for any browser width below the value defined in the query. min-height Rules applied for any browser height over the value defined in the query. max-height Rules applied for any
CSS 2.1 represents a "snapshot" of CSS usage: it consists of all CSS features that are implemented interoperably at the date of publication of the Recommendation. CSS 2.1 is derived from and is intended to replace CSS2. Some parts of CSS2 are unchanged in CSS 2.1, some parts have been altered, and some parts removed.
2 Getting Your Tools in Order 23 3 Introducing HTML and CSS 41 PART II: Creating Web Pages 4 Learning the Basics of HTML 57 5 Organizing Information with Lists 71 6 Working with Links 89 PART III: Doing More with HTML and CSS 7 Formatting Text with HTML and CSS 121 8 Using CSS to Style a Site 159 9 Using Images on Your Web Pages 197
