Treadmill-Page 3
F80 / F83 / F85 TREADMILL 2 WARNING - Read all instructions before using this appliance. DANGER - To reduce the risk of electric shock disconnect your SOLE treadmill from the electrical outlet prior to cleaning and/or service work. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the treadmill on a
Jan 17, 2011 · mph (0.8 km/hr in metric mode). To turn off the treadmill: Press STOP once to stop the treadbelt and put the unit in pause mode. Press STOP twice to power down the treadmill. The treadmill will shut off and all current statistical information will be cleared. To restart
Aug 21, 2018 · treadmill is first turned on or even during use. If your treadmill is tripping the house circuit breaker (even though it is the proper current rating) but the circuit breaker on the treadmill itself does not trip, you will need to replace the home breake
Thank you for selecting the new PROFORM _ CROSSWALK FIT 415 treadmill. The CROSSWALK FIT 415 treadmill provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. For your benefit, read this manual carefully before you use the treadmill. If you have questions after
Install the treadmill on a flat level surface with access to a 220240 volt (50/60Hz), grounded outlet.- Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and treadmill may result. Do not block the rear of
manual. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill. 4. Keep the treadmill
The treadmill display shows English units (mph for speed, lb for weight) by default. To change to metric units (kilometers per hour for speed and kilograms for weight): Ensure the treadmill is plugged in and powered off. Pro Sports: press and hold 3, 9 and START simultaneously while the treadmill is off, then release all. Use the or .
The treadmill control algorithm is realized by a microcontroller in the receiver, while the console transfers only the speed an d slope signal to the treadmill. The belt speed change ramp, previously progra mmed in the console, can now be changed as required for the test. We decided to return to the idea of a treadmill that changes its belt
2. The treadmill must be continuously monitored when used in the vicinity of children or physically and mentally disabled persons. 3. The treadmill may only be used for the purposes described in this manual. 4. Never operate a treadmill with defective plug or cable or a running surface which is damaged or not functioning correctly. 5.
Treadmill The treadmill is an integral part of the STAT pro-gram for patients with an upper motor neuron dysfunc-tion. Many brands and models of treadmills are commercially available, but not all are effective in this application. An appropriate treadmill must be able to operate at a very slow speed and allow for speed increas-es in small .
overall comfort of treadmill speed - patients should be moving at a brisk walking pace. The HR at stage 0 is the HR when the patient is standing on the treadmill before starting the BCTT and not during the 2-minute seated rest. 5) After 1 minute at this pace, treadmill incline is increased by 1 degree and patient is asked to rate their
on treadmill and in this instruction manual before using. Inspect treadmill for incorrect, worn, or loose components and then correct, replace, or tighten prior to use. Care should be used when mounting or dismounting the treadmill. Read, understand, and test the emergency stop procedures before use.