9100 SERIES Flanged - Mercer Valve
9100 SERIESFlangedTHINK.MERCER FIRST MERCER VALVEMERCER VALVE CO., INC. “AUTO SEAT TECHNOLOGY”
MERCER VALVE COMPANY, INC. “Auto Seat Technology” 9100 SERIES FLANGED SAFETY RELIEF VALVES9100 SeriesProduct OverviewThe Mercer Valve 9100 SeriesPressure Relief Valve is “State ofthe Art” in soft seat, high flow rate,pressure relieving devices.The 9100 Series is a continuation ofthe 8100 Series incorporating ourpatented “Auto SeatTechnology” into its design.Mercer Valve’s “Auto SeatTechnology“ has made the 9100Series an industry leader with itsreliable, repeatable set pressures.The patented soft seat design andfully guided disk allow the valve tocontinually outlast the competition.The soft seat 9100 Series has afield-proven lip seal design, whichallows for a tighter seal up to setpressure. This tight seal reducesleaks and limits product loss.The 9100 Series is manufactured inaccordance with the requirementsof ASME Boiler and Pressure VesselCode, Section VIII, Division 1 forAir/Gas and Liquid service. The9100 Series is well suited forspecialty gases, compressors,separators, transmission, gatheringlines and other productionprocesses.9100 Series Features Designed with "Auto Seat Technology" . Consistent Set Pressures allowing repeatable useswithout repair or resetting. Open, Close, Seat and Seal . Fully guided disk keeps the disk properly aligned,opening and closing, helping to reseat the valve. Mechanical Stop prevents wear on parts andcontrols valve lift. Low rated and fully guided spring allows for moreconsistent set pressures from pop to pop. Pop Action relief allows valve to go to full lift at setpressure. Helps with DOT regulated applications. Built in accordance with the requirements of ASMEBoiler and Pressure Vessel Code. Sec. VIII Div 1. Non-rising stems allowing valves to be installed insmall areas.2www.mercervalve.net · 1.800.833.6402
MERCERVALVEVALVECOMPANYCOMPANYINC.MERCER, ,INC. AutoSeatSeatTechnology” Technology ESFLANGEDSAFETYRELIEFVALVES9100 Series Flanged SpecificationsOrifice LetterStandardInletSizesC3/4”1”D3/4”1”1 1/2”EFGH1”1 1/2” 1 1/2”1”1 1/2” 1 1/2”2”2”Inlet ”4”4”RF x RF , RTJ x RF , RTJ x RTJActual OrificeDiameter (in).281.394.520.655.7751.0501.3501.625 2.0202.280Actual OrificeArea (in2).062.122.212.337.472.8651.4302.074 3.2054.080API OrificeArea (in2)---.110.196.307.503.7851.2871.838 2.8533.600PressureRanges (psi)15 to299915 to299915 to240015 to240015 to200015 to200015 to180015 to150015 to125015 to1000StandardTemperatureRange (ºF)-20 to400-20 to400-20 to400-20 to400-20 to400-20 to400-20 to -20 to -20 to400400400-20 to400ASME FlowCoefficient,Kd (Gas).818.818.818.818.818.818.818.818.818.818ASME FlowCoefficient,Kd TE: Mercer Valve reserves the right to change product designs and specifications without valve.net · 1.800.833.640233
MERCER VALVE COMPANY, INC. “Auto Seat Technology” 9100 SERIES FLANGED SAFETY RELIEF VALVES9100 SERIES FLANGED C , D , & E ORIFICESITEM NOPART NAMESTANDARD MATERIALS1BODY SUBASSEMBLYCARBON STEEL2BASE SEALSOFT STEEL3NOZZLE O-RINGFLUOROCARBON (FKM)4NOZZLE SUBASSEMBLYSTAINLESS STEEL WITH SOFT SEAT5DISK SUBASSEMBLYSTAINLESS STEEL6SET SPRINGSTAINLESS STEEL7ADJUSTMENT SCREWSTAINLESS STEEL8ADJUSTMENT BUSHINGSTAINLESS STEEL9ADJUSTMENT SCREW O-RING BUNA N10CENTER BUSHINGSTAINLESS STEEL11CENTER BUSHING O-RINGBUNA N12WASHERCARBON STEEL13LOCKNUTCARBON STEEL14CLOSED CAPALUMINUM ALLOYNOTE: Mercer Valve reserves the right to change product designs and specifications without notice.4www.mercervalve.net · 1.800.833.6402
MERCER VALVE COMPANY, INC. “Auto Seat Technology” 9100 SERIES FLANGED SAFETY RELIEF VALVES9100 SERIES FLANGED F & G ORIFICESITEM NOPART NAMESTANDARD MATERIALS1BODY SUBASSEMBLYCARBON STEEL2BASE SEALSOFT STEEL3NOZZLE O-RINGFLUOROCARBON (FKM)4NOZZLE SUBASSEMBLYSTAINLESS STEEL WITH SOFT SEAT5DISK SUBASSEMBLYSTAINLESS STEEL6SET SPRINGSTAINLESS STEEL7ADJUSTMENT SCREWSTAINLESS STEEL8ADJUSTMENT BUSHINGSTAINLESS STEEL9CENTER BUSHINGSTAINLESS STEEL10CENTER BUSHING O-RINGBUNA N11CENTER NUTCARBON STEEL12ADJUSTMENT SCREW O-RING BUNA N13LOCKNUTCARBON STEEL14CLOSED CAPALUMINUM ALLOYNOTE: Mercer Valve reserves the right to change product designs and specifications without notice.www.mercervalve.net · 1.800.833.64025
MERCER VALVE COMPANY, INC. “Auto Seat Technology” 9100 SERIES FLANGED SAFETY RELIEF VALVES9100 SERIES FLANGED H ORIFICEITEM NOPART NAMESTANDARD MATERIALS1BODY SUBASSEMBLYCARBON STEEL2NOZZLE O-RINGFLUOROCARBON (FKM)3NOZZLE SUBASSEMBLYSTAINLESS STEEL WITH SOFT SEAT4DISK SUBASSEMBLYSTAINLESS STEEL5SET SPRINGSTAINLESS STEEL6BONNET O-RINGBUNA N7BONNETCARBON STEEL8ADJUSTMENT BUSHINGSTAINLESS STEEL9ADJUSTMENT SCREWSTAINLESS STEEL10ADJUSTMENT SCREW O-RING BUNA N11WASHERCARBON STEEL12LOCKNUTCARBON STEEL13CLOSED CAPALUMINUM ALLOYNOTE: Mercer Valve reserves the right to change product designs and specifications without notice.6www.mercervalve.net · 1.800.833.6402
MERCER VALVE COMPANY, INC. “Auto Seat Technology” 9100 SERIES FLANGED SAFETY RELIEF VALVES9100 SERIES FLANGED J, K, L, & M ORIFICESITEM NOPART NAMESTANDARD MATERIALS1BODY SUBASSEMBLYCARBON STEEL2NOZZLE O-RINGFLUOROCARBON (FKM)3NOZZLE SUBASSEMBLYSTAINLESS STEEL WITH SOFT SEAT4DISK SUBASSEMBLYSTAINLESS STEEL5SET SPRINGSTAINLESS STEEL6BONNET O-RINGBUNA N7ADJUSTMENT SCREWSTAINLESS STEEL8BONNET BOLTSALLOY STEEL9ADJUSTMENT BUSHINGSTAINLESS STEEL10BONNET SUBASSEMBLYCARBON STEEL11ADJUSTMENT SCREW O-RING BUNA N12WASHERCARBON STEEL13LOCKNUTCARBON STEEL14CLOSED CAPALUMINUM ALLOYNOTE: Mercer Valve reserves the right to change product designs and specifications without notice.www.mercervalve.net · 1.800.833.64027
MERCERMERCER VALVEVALVE COMPANYCOMPANY,, INC.INC. Auto“AutoSeatSeatTechnology Technology” 91009100 SERIESSERIES 2434445424344VALVE SIZE ANDFLANGE RATINGINLET X OUTLET3/4” 150 X 1” 1503/4” 300 X 1” 1503/4” 600 X 1” 1503/4” 900 X 1” 3003/4” 1500 X 1” 3001” 150 X 1” 1501” 300 X 1” 1501” 600 X 1” 1501” 900 X 1” 3001” 1500 X 1” 3001” 150 X 1 1/2” 1501” 300 X 1 1/2” 1501” 600 X 1 1/2” 1501” 900 X 1 1/2” 3001” 1500 X 1 1/2” 3001” 150 X 1 1/2” 1501” 300 X 1 1/2” 1501” 600 X 1 1/2” 1501” 150 X 2” 1501” 300 X 2” 1501” 600 X 2” 1501” 600 X 2” 1501” 900 X 2” 3001” 1500 X 2” 3001” 1500 X 2” 3001 1/2” 150 X 2” 1501 1/2” 300 X 2” 1501 1/2” 600 X 2” 1501 1/2” 900 X 2” 3001 1/2” 900 X 2” 3001 1/2” 1500 X 2” 3001 1/2” 1500 X 2” 3001 1/2” 150 X 2” 1501 1/2” 300 X 2” 1501 1/2” 600 X 2” 1501 1/2” 150 X 3” 1501 1/2” 300 X 3” 1501 1/2” 600 X 3” 1501 1/2” 900 X 3” 3001 1/2” 1500 X 3” 3001 1/2” 150 X 3” 1501 1/2” 300 X 3” 1502” 150 X 2” 1502” 300 X 2” 1502” 600 X 2” 1502” 900 X 2” 3002” 150 X 2” 1502” 300 X 2” 1502” 600 X 2” SURERANGE (psig)C.S. @100º 200015-285286-740741-850CENTER TO FACEDIMENSIONS (IN.) /- 1/16INLET X OUTLET X HT.“A” X “B” X “C”APPROX.WEIGHT(lbs.)4 1/8 X 4 1/2 X 94 1/8 X 4 1/2 X 94 1/8 X 4 1/2 X 94 1/8 X 4 1/2 X 94 1/8 X 4 1/2 X 94 1/8 X 4 1/2 X 94 1/8 X 4 1/2 X 94 1/8 X 4 1/2 X 94 1/8 X 4 1/2 X 94 1/8 X 4 1/2 X 94 1/8 X 4 1/2 X 94 1/8 X 4 1/2 X 94 7/8 X 4 1/2 X 10 1/25 7/8 X 5 1/2 X 11 1/25 7/8 X 5 1/2 X 11 1/24 1/8 X 4 3/4 X 9 3/44 1/2 X 4 3/4 X 10 1/85 1/4 X 4 3/4 X 10 7/84 1/8 X 4 1/2 X 94 1/8 X 4 1/2 X 94 1/8 X 4 1/2 X 95 1/4 X 4 1/2 X 10 7/85 1/4 X 5 1/2 X 10 7/85 1/4 X 5 1/2 X 10 7/85 1/4 X 5 1/2 X 10 7/84 7/8 X 4 3/4 X 10 1/24 7/8 X 6 X 10 1/24 7/8 X 6 X 10 1/25 7/8 X 6 X 11 1/24 1/8 X 5 1/2 X9 3/44 1/8 X 5 1/2 X9 3/44 1/8 X 5 1/2 X9 3/44 7/8 X 4 3/4 X 12 5/84 7/8 X 4 3/4 X 12 5/84 7/8 X 4 3/4 X 12 5/84 7/8 X 4 3/4 X 10 1/24 7/8 X 6 X 10 1/24 7/8 X 6 X 10 1/24 7/8 X 6 1/2 X 10 1/24 7/8 X 6 1/2 X10 1/25 1/8 X 4 7/8 X 12 7/85 1/8 X 4 7/8 X 12 7/84 7/8 X 4 3/4 X 10 1/24 7/8 X 4 3/4 X 10 1/25 3/8 X 6 X 116 1/16 X 6 X 11 11/164 7/8 X 4 3/4 X 12 5/84 7/8 X 4 3/4 X 12 5/84 7/8 X 6 X 12 OTE: Mercer Valve reserves the right to change product designs and specifications without notice.88www.mercervalve.netwww.mercervalve.net · 1.800.833.64021.800.833.6402
MERCER VALVE COMPANY, INC. “Auto Seat Technology” 9100 SERIES FLANGED SAFETY RELIEF 2526284846485866768717171727070717172VALVE SIZE ANDFLANGE RATINGINLET X OUTLET2” 150 X 2 1/2” 1502” 300 X 2 1/2” 1502” 600 X 2 1/2” 1502” 600 X 2 1/2” 1502” 900 X 2 1/2” 1502” 150 X 3” 1502” 300 X 3” 150 2̀” 600 X 3” 1502” 900 X 3” 3002” 300 X 3” 1502” 600 X 3” 1502” 600 X 3” 1502” 900 X 3” 1502” 150 X 3” 1502” 300 X 3” 1502” 300 X 3” 1503” 150 X 4” 1503” 300 X 4” 1503” 300 X 4” 1503” 300 X 4” 1503” 600 X 4” 1503” 900 X 4” 1503” 150 X 4” 1503” 300 X 4” 1504” 300 X 6” 1504” 300 X 6” 1504” 300 X 6” 1504” 600 X 6” 1504” 150 X 6” 1504” 150 X 6” 1504” 300 X 6” 1504” 300 X 6” 1504” 600 X 6” J*K*J*,K*J*L*L*L*L*L*L*M*M*M*M*M*PRESSURERANGE (psig)C.S. @100º FCENTER TO FACEDIMENSIONS (IN.) /- 1/16INLET X OUTLET X HT.“A” X “B” X 286-450451-740286-740740- 125015-250251-285286-500501-740741-10004 7/8 X 4 3/4 X 12 5/84 7/8 X 4 3/4 X 12 5/84 7/8 X 6 X 12 5/84 7/8 X 6 X 15 3/166 1/16 X 6 X 16 3/84 7/8 X 5 3/8 X 10 1/24 7/8 X 5 3/8 X 10 1/26 1/16 X 6 3/8 X 11 11/166 1/16 X 6 3/8 X 11 11/165 1/8 X 4 7/8 X 12 7/86 1/16 X 6 3/8 X 13 13/166 1/16 X 6 3/8 X 16 3/86 1/16 X 6 3/8 X 16 3/85 3/8 X 4 7/8 X 13 3/85 3/8 X 4 7/8 X 13 3/85 3/8 X 4 7/8 X 17 1/166 1/8 X 6 3/8 X 14 3/167 1/4 X 7 1/8 X 15 1/47 1/4 X 7 1/8 X 196 1/8 X 6 3/8 X 17 7/87 1/4 X 7 1/8 X 197 1/4 X 7 1/8 X 196 1/8 X 6 1/2 X 15 3/46 1/8 X 6 1/2 X 15 3/47 1/16 X 7 1/8 X 17 1/47 1/16 X 7 1/8 X 20 3/167 1/16 X 7 1/8 X 24 13/167 1/16 X 8 X 24 5/87 X 7 1/4 X 17 3/167 X 7 1/4 X 20 1/87 X 7 1/4 X 20 1/87 X 7 1/4 X 24 3/47 X 8 X 24 100140160180195135150160180195NOTES: (1) * Indicates API Flange Size and Dimensions. (2) Consult factory for other size options. (3) PressureLimit, Weight, & “C” dimension may vary with sour gas options.NOTE: Mercer Valve reserves the right to change product designs and specifications without notice.www.mercervalve.net · 1.800.833.640299
MERCER VALVE COMPANY, INC. “Auto Seat Technology” 9100 SERIES FLANGED SAFETY RELIEF VALVESFLANGE RATINGSASME B16.5-2003ANNEX FTables F2-1.1 & F2-2.2 Pressure-Temperature Ratings for Group 1.1 & 2.2 MaterialsForgingCastingsA105A216 Gr. WCBA182 Gr. F316A351 Gr. CF3MCarbon SteelStainless SteelWorking Pressures by Classes, psigTemp.Range (ºF) 760Max100101 200201 300301 400401 500501 nlessSteelwww.mercervalve.net · 1.800.833.6402
MERCERVALVEVALVECOMPANYCOMPANYINC.MERCER, ,INC. AutoSeatSeatTechnology” Technology ESFLANGEDSAFETYRELIEFVALVES9100 Series Flanged Capacity ChartsCAPACITY IN SCFM OF AIR AT 60ºF AND STD ATMOSPHERIC 833.6402www.mercervalve.net · 1.800.833.64021111
MERCERMERCER VALVEVALVE COMPANYCOMPANY,, INC.INC. Auto“AutoSeatSeatTechnology Technology” 91009100 SERIESSERIES CAPACITY IN SCFM OF 0.6 SG NATURAL GAS AT 60ºF AND STD ATMOSPHERIC mercervalve.netwww.mercervalve.net · 1.800.833.64021.800.833.6402
MERCERVALVEVALVECOMPANYCOMPANYINC.MERCER, ,INC. AutoSeatSeatTechnology” Technology ESFLANGEDSAFETYRELIEFVALVESCAPACITY IN GPM WATER AT 60ºF AND STD ATMOSPHERIC et · 1.800.833.64021313
MERCER VALVEVALVE COMPANYCOMPANY,, INC. INC.MERCERAuto Seat“AutoSeatTechnology Technology” 9100 SERIES9100SERIES FLANGEDFLANGED SAFETYSAFETYRELIEFRELIEFVALVESVALVES9100 Series Flanged Product Numbering System91-17D11VALVE SERIES91 – 9100 SeriesINLET & OUTLETCOMBINATION(See Selection Tablepages 8 & 9)ORIFICE SIZEC to MINLET BASE& BODY MATERIAL1 – RF x RF / CARBON STEEL2 – RF x RF / STAINLESS STEEL3 – RTJ x RF / CARBON STEEL4 – RTJ x RF / STAINLESS STEELA – RTJ x RTJ / CARBON STEELB – RTJ x RTJ / STAINLESS STEELCAP TYPE1 – CLOSED CAP2 – OPEN LIFT LEVER3 – CLOSED LIFT LEVER4 – CLOSED CAP W/STAINLESS STEEL BONNET (H - M ORIFICE)5 – OPEN LIFT LEVER W/STAINLESS STEEL BONNET (H - M ORIFICE)6 – CLOSED LIFT LEVER W/STAINLESS STEEL BONNET (H - M ORIFICE)CONSULT FACTORY FORADDITIONAL INFORMATIONAND OPTIONSNOTE: Mercer Valve reserves the right to change product designs and specifications without notice.1414www.mercervalve.netwww.mercervalve.net · 1.800.833.64021.800.833.6402
MERCER VALVE COMPANY, INC. “Auto Seat Technology” 9100 SERIES FLANGED SAFETY RELIEF VALVESV06I12 – DIGIT “SPECIAL” CODE(IF APPLICABLE ASSIGNED BY MERCER)O-RING MATERIAL1 – STANDARD O-RINGS(FLUOROCARBON (FKM) & BUNA-N)TRIM CODESU – 316 S.S. DISK & NOZZLE (STD GASSERVICE F,G,H,J,K,L, & M ORIFICES)*I – 17-4 S.S. DISK & NOZZLE (STD GASSERVICE D&E ORIFICES)C – 440C S.S. DISK, 17-4 S.S. NOZZLE(STD GAS SERVICE C ORIFICE ANDHIGH PRESSURE F,G,H,J,K & L)*L – LIQUID SERVICE 316 S.S. DISK &NOZZLEN – SOUR GAS SERVICE 316 S.S. DISK &NOZZLEB – SOUR LIQUID SERVICE 316 S.S. DISK& NOZZLESPRING CODE(ASSIGNED BY MERCER)SEAT MATERIALV – FLUOROCARBON (FKM) 90 DURO* U TRIM CODE CHANGES TO C TRIM CODE ATF 1399psi, G 1199psi, H 1049psiJ 1124psi, K 799psi, L 599psiT – 15% GLASS FILLED PTFEP – VIRGIN PEEKwww.mercervalve.net · 1.800.833.640215
CORPORATE HEADQUARTERS9609 NW 4th STREETOKLAHOMA CITY, OK 731271-800-833-6402PHONE: (405) 495-6533, FAX: (405) 495-8728SALES@MERCERVALVE.NETPlease visit our website to learn about our branch locations!WWW.MERCERVALVE.NETMercer Valve Company, Inc. manufactures pressure relief valves for uses withmany different products. Your choice of a valve requires that you, as buyer,determine the valve material is compatible with the intended use of the valve.You are responsible to insure that the correct pressure relief valve is installedfor your application and your order of a valve confirms the material compatibilitychoices.MVC91FLRevision Date 04/18Supersedes 10/15
9100 SERIES FLANE SAFET RELIEF VALVES. 9100 Series Product Overview. The Mercer Valve 9100 Series Pressure Relief Valve is “State of the Art” in soft seat, high flow rate, pressure relieving devices. The 9100 Series
9100 SERIES THREADED SAFETY RELIEF VALVES 2 www.mercervalve.net 1.800.833.6402 9100 Series Threaded Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is "State of the Art" in soft seat, high flow rate, pressure relieving devices. The 9100 Series is a continuation of the 8100 Series incorporating
9100/F9100 SERIES CONCEALED VERTICAL ROD EXIT DEVICE 1135-26 I9100-6 8/06. 2 RHR LHR RHR LHR RHR LHR RHR LHR HANDING TYPICAL INSTALLATIONS SCREW CHART 9100 Series Device 9300 Series Device 9100 Series Device 9500 Series Device 9100 Series Device 9100 Series Device 9100
The Mercer Valve 9100 Series Pressure Relief Valve is "State of the Art" in soft seat, high flow rate, pressure relieving devices. The 9100 Series is a continuation of the 8100 Series incorporating our patented "Auto Seat Technology" into its design. Mercer Valve's "Auto Seat Technology"
9100-PS01 18-Volt, 1-amp power supply/charger for 9100D Portable Vibration Calibrator, universal 100-240 V, 50/60 Hz. 9100-BAT01 Replacement battery for 9100 Series Portable Vibration Calibrators. 9100-PPA02 Target for 9100-PPA01 or 9100-MPPA
Welding Helmet 9100 FX 3M Speedglas . 06-0400-51 9100 headband incl assembled parts. 06-0400-52 Pivot mechanism 9100 headband, left and right. 06-0400-53 Headband 9100 front part. 06-0400-54 Headband 9100 back part. 06-0400-55 Battery holder 9100, 2/case
MERCER WIN SURVEYS IN OVER 140 COUNTRIES WORLDWIDE CONTAINS INFORMATION BASED ON MORE THAN 15 MILLION INCUMBENTS MORE THAN 35,000 ORGANIA TIONS COVERS BENCHMARK POSITIONS JOB SII NG MERCER WIN The Mercer Workforce Intelligence Network (Mercer WIN ) is a single-point access to Mercer's unparalleled survey data and analytics. With Mercer
The Mercerian, 1501 Mercer University Drive, Macon, GA 31207 P (478) 301-4024 F (478) 301-2684 www.mercer.edu mercerian@mercer.edu TO UPDATE YOUR ADDRESS AND TO SUPPORT MERCER UNIVERSITY, CALL: (478) 301-2715 or 1-800-MERCER-U, x2715 THE MERCERIAN is published by the Office of Marketing Communications at Mercer University. 2015 Mercer .
Unit 39: Adventure Tourism 378 Unit 40: Special Interest Tourism 386 Unit 41: Tourist Resort Management 393 Unit 42: Cruise Management 401 Unit 43: International Tourism Planning and Policy 408 Unit 44: Organisational Behaviour 415 Unit 45: Sales Management 421 Unit 46: Pitching and Negotiation Skills 427 Unit 47: Strategic Human Resource Management 433 Unit 48: Launching a New Venture 440 .
