ASTM STANDARDS IN BUILDING CODES
ASTM STANDARDSIN BUILDING CODESSPECIFICATIONS, TEST METHODS, PRACTICES,CLASSIFICATIONS, TERMINOLOGYVOLUME 12007Forty-fourth EditionASTM Stock Number: BLDG07ASTM INTERNATIONAL n 100 BARR HARBOR DRIVE, PO BOX C700, WEST CONSHOHOCKEN, PA 19428-2959TEL: 610-832-9500 n FAX: 610-832-9555 n EMAIL: service@astm.org n WEBSITE: www.astm.org
Editorial StaffDirector:Vernice A. MayerEditors:Sean J. BaileyNicole C. BaldiniScott EmeryJoe ErmigiottiBrendan HuffmanMatthew A. OlceseKathleen A. PetersJessica L. RosiakDavid A. TerrusoEmilie A. WhealenJulie WrightPublishing Assistant Coordinator:Nicholas FurcolaISBN: 978-0-8031-5683-8ISSN: 0192-2998Copyright r2007 ASTM International, West Conshohocken, PA. Prior editions copyrighted 2006 and earlier,by the American Society for Testing and Materials. All rights reserved. This material may not be reproducedor copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storagemedia, without the written consent of the publisher.ORDER INFORMATION: Additional copies of this book in print, on CD-ROM, or reprints (single or multiplecopies) of individual standards may be obtained by contacting ASTM International at 100 Barr Harbor Drive,PO Box C700, West Conshohocken, PA 19428-2959, or at 610-832-9585 (phone), 610-832-9555 (fax),service@astm.org (email), or through www.astm.org (website).Photocopy RightsAuthorization to photocopy items for internal, personal, or educational classroom use, or the internal,personal, or educational classroom use of specific clients, is granted by ASTM International providedthat the appropriate fee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA01923, Tel: 978-750-8400; online:http://www.copyright.com/Printed in Baltimore, MDMay 2007
ForewordASTM standards are widely used by the construction and building design industries as authentic sources of testprocedures and as a basis for acceptable quality for materials and constructions. To meet the needs of these industries, ASTM International has developed this compilation as a convenient reference source of ASTM constructionrelated standards.Included are ASTM standards referenced by the following nationally known building codes:·International Code Councilt (ICCt), comprised of the following:BOCA (Building Officials and Code Administrators, International, Inc.)SBCCI (Southern Building Code Congress International)ICBO (International Conference of Building Officials)·National Building Code of Canada — National Research Council Canada·Uniform Plumbing Code and Uniform Mechanical Code — IAPMO (International Association ofPlumbing and Mechanical Officials)Also included are ASTM standards referenced by the following organizations:·MASTERSPECt — A product of The American Institute of Architects (AIA), produced byARCOM Master Systems·SPECTEXTt — Master Guide Specifications·BSD SpecLinkt — Building Systems Design· NFPA 5000y — Building Construction and Safety CodeyThe standards are arranged in alphanumeric sequence. Volume 1 includes standards A 6 through C 173. Volume2 includes standards C 177 through D 870. Volume 3 includes standards D 882 through E 90. Volume 4 includesstandards E 94 through G 155, as well as a comprehensive index by subject.More than 1300 standards are included from 40 volumes of the 81-volume Annual Book of ASTM Standards.These standards represent the combined efforts, experience, knowledge, and abilities of a vast number of technical experts from various areas of the construction industry who serve on numerous ASTM technical committees.These committees, representing producer, user, consumer, and general interest members, work out and agree uponthe details of the various standards, and make their recommendations to ASTM International. This is done inaccordance with rigorous balloting procedures designed to give ample opportunity for all concerned to expresstheir views and to reach agreement.Membership in ASTM International is open to anyone concerned with the fields in which ASTM is active.Technical committee membership is open to ASTM members interested in standards development. Applicationsfor technical committee membership are available from ASTM International Headquarters. (The committee withjurisdiction for a particular standard is noted in footnote 1 of that standard.)Your comments or suggestions for revisions to this publication are welcome. Any such correspondence, as wellas requests for additional information, should be addressed to Product Manager, Publications Division, ASTMInternational, PO Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.iii
iv
ContentsASTM STANDARDS IN BUILDING CODESVOLUMEVOLUMEVOLUMEVOLUME1: A 6 - C 1732: C 177 - D 8703: D 882 - E 904: E 94 - G 155A complete Subject Index appears at the end of Volume 4.In the serial designations prefixed to the following titles, the number following the dash indicatesthe year of original issue, or in the case of revision, the year of last revision. Thus, standards adoptedor revised during the year 2007 have as their final number 07. A letter following this number indicatesmore than one revision during that year, that is, 07a indicates the second revision in 2007, 07b thethird revision, etc. Standards that have been reapproved without change are indicated by the year oflast reapproval in parentheses as part of the designation number, for example, (2007). A superscriptepsilon (e) indicates an editorial change since the last revision or reapproval—e1 for the first change,e2for the second change, etc. Since the standards in this book are arranged in alphanumeric sequence,no page numbers are included in this contents.VOLUME 1AAAAAAAAAA6 / A 6M – 0627 / A 27M – 0529 / A 29M – 0536 / A 36M – 0547 / A 47M – 99(2004)48 / A 48M – 0353 / A 53M – 06a74 – 0682 / A 82M – 05a90 / A 90M – 06A 105 / A 105M – 05A 106 / A 106M – 06aA 108 – 03e1A 116 – 05A 121 – 99(2004)A 123 / A 123M – 02A 126 – 04A 135 / A 135M – 06A 139 / A 139M – 04A 148 / A 148M – 05A 153 / A 153M – 05A 167 – 99(2004)A 176 – 99(2004)A 182 / A 182M – 06AAAA183 – 03184 / A 184M – 06185 / A 185M – 06e1193 / A 193M – 06aA194 / A 194M – 07Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, andSheet PilingSpecification for Steel Castings, Carbon, for General ApplicationSpecification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements forSpecification for Carbon Structural SteelSpecification for Ferritic Malleable Iron CastingsSpecification for Gray Iron CastingsSpecification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and SeamlessSpecification for Cast Iron Soil Pipe and FittingsSpecification for Steel Wire, Plain, for Concrete ReinforcementTest Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-AlloyCoatingsSpecification for Carbon Steel Forgings for Piping ApplicationsSpecification for Seamless Carbon Steel Pipe for High-Temperature ServiceSpecification for Steel Bar, Carbon and Alloy, Cold-FinishedSpecification for Metallic-Coated, Steel-Woven Wire Fence FabricSpecification for Metallic-Coated Carbon Steel Barbed WireSpecification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel ProductsSpecification for Gray Iron Castings for Valves, Flanges, and Pipe FittingsSpecification for Electric-Resistance-Welded Steel PipeSpecification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)Specification for Steel Castings, High Strength, for Structural PurposesSpecification for Zinc Coating (Hot-Dip) on Iron and Steel HardwareSpecification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and StripSpecification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and StripSpecification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, andValves and Parts for High-Temperature ServiceSpecification for Carbon Steel Track Bolts and NutsSpecification for Welded Deformed Steel Bar Mats for Concrete ReinforcementSpecification for Steel Welded Wire Reinforcement, Plain, for ConcreteSpecification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or HighPressure Service and Other Special Purpose ApplicationsSpecification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High TemperatureService, or Bothv
CONTENTSAA197 / A 197M – 00(2006)213 / A 213M – 06ae1A216 / A 216M – 04AA229 / A 229M – 99(2005)234 / A 234M – 06aA240 / A 240M – 06cAA242 / A 242M – 04e1249 / A 249M – 04aAAAAA252 – 98(2002)254 – 97(2002)264 – 03269 – 04270 – 03aAA276 – 06278 / A 278M – 01(2006)AAAAAAAAA283 / A 283M – 03307 – 04e1308 / A 308M – 06309 – 01312 / A 312M – 06313 / A 313M – 03320 / A 320M – 05a325 – 06325M – 05AA328 / A 328M – 07354 – 04e1AAAAAA370 – 06376 / A 376M – 06377 – 03391 / A 391M – 01392 – 06395 / A 395M – 99(2004)AAAA403 / A413 / A416 / A420 / AAAAAA421 / A 421M – 05424 – 06428 / A 428M – 06435 / A 435M – 90(2007)449 – 04be1AAAAAAA463 / A 463M – 06466 / A 466M – 01467 / A 467M – 01(2006)475 – 03478 – 97(2002)479 / A 479M – 06a480 / A 480M – 06bAAA489 – 04e1490 – 06490M – 04ae1403M – 06413M – 01416M – 06420M – 06Specification for Cupola Malleable IronSpecification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and HeatExchanger TubesSpecification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-TemperatureServiceSpecification for Steel Wire, Oil-Tempered for Mechanical SpringsSpecification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate andHigh Temperature ServiceSpecification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip forPressure Vessels and for General ApplicationsSpecification for High-Strength Low-Alloy Structural SteelSpecification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and CondenserTubesSpecification for Welded and Seamless Steel Pipe PilesSpecification for Copper-Brazed Steel TubingSpecification for Stainless Chromium-Nickel Steel-Clad PlateSpecification for Seamless and Welded Austenitic Stainless Steel Tubing for General ServiceSpecification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel SanitaryTubingSpecification for Stainless Steel Bars and ShapesSpecification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to650 F (350 C)Specification for Low and Intermediate Tensile Strength Carbon Steel PlatesSpecification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile StrengthSpecification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip ProcessTest Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot TestSpecification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel PipesSpecification for Stainless Steel Spring WireSpecification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature ServiceSpecification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile StrengthSpecification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]Specification for Steel Sheet PilingSpecification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other ExternallyThreaded FastenersTest Methods and Definitions for Mechanical Testing of Steel ProductsSpecification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station ServiceIndex of Specifications for Ductile-Iron Pressure PipeSpecification for Grade 80 Alloy Steel ChainSpecification for Zinc-Coated Steel Chain-Link Fence FabricSpecification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated TemperaturesSpecification for Wrought Austenitic Stainless Steel Piping FittingsSpecification for Carbon Steel ChainSpecification for Steel Strand, Uncoated Seven-Wire for Prestressed ConcreteSpecification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-TemperatureServiceSpecification for Uncoated Stress-Relieved Steel Wire for Prestressed ConcreteSpecification for Steel, Sheet, for Porcelain EnamelingTest Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel ArticlesSpecification for Straight-Beam Ultrasonic Examination of Steel PlatesSpecification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General UseSpecification for Steel Sheet, Aluminum-Coated, by the Hot-Dip ProcessSpecification for Weldless ChainSpecification for Machine and Coil ChainSpecification for Zinc-Coated Steel Wire StrandSpecification for Chromium-Nickel Stainless Steel Weaving and Knitting WireSpecification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure VesselsSpecification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate,Sheet, and StripSpecification for Carbon Steel Lifting EyesSpecification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile StrengthSpecification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints[Metric]vi
CONTENTSA 491 – 03A 492 – 95(2004)A 496 / A 496M – 05A 497 / A 497M – 06e1A 499 – 89(2002)A 500 – 03aAAA501 – 01(2005)510 – 06510M – 06AA513 – 06b514 / A 514M – 05A516 / A 516M – 06AAAAAAAAA518 / A 518M – 99(2003)529 / A 529M – 05532 / A 532M – 93a(2003)536 – 84(2004)554 – 03555 / A 555M – 05563 – 04a563M – 06568 / A 568M – 06aAAAAAAAA572 / A 572M – 06574 – 04e1574M – 04e1575 – 96(2002)580 / A 580M – 06582 / A 582M – 05586 – 04a588 / A 588M – 05AA603 – 98(2003)606 – 04AAAA615 / A 615M – 07618 / A 618M – 04625 / A 625M – 03627 – 03A635 / A 635M – 06aAA641 / A 641M – 03645 / A 645M – 05A653 / A 653M – 06aA656 / A 656M – 05e1A666 – 03AAAA668 / A 668M – 04674 – 05675 / A 675M – 03e1690 / A 690M – 07AAAAA703 / A 703M – 07704 / A 704M – 06706 / A 706M – 06a716 – 03722 / A 722M – 07Specification for Aluminum-Coated Steel Chain-Link Fence FabricSpecification for Stainless Steel Rope WireSpecification for Steel Wire, Deformed, for Concrete ReinforcementSpecification for Steel Welded Wire Reinforcement, Deformed, for ConcreteSpecification for Steel Bars and Shapes, Carbon Rolled from “T” RailsSpecification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Roundsand ShapesSpecification for Hot-Formed Welded and Seamless Carbon Steel Structural TubingSpecification for General Requirements for Wire Rods and Coarse Round Wire, Carbon SteelSpecification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel[Metric]Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical TubingSpecification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable forWeldingSpecification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-TemperatureServiceSpecification for Corrosion-Resistant High-Silicon Iron CastingsSpecification for High-Strength Carbon-Manganese Steel of Structural QualitySpecification for Abrasion-Resistant Cast IronsSpecification for Ductile Iron CastingsSpecification for Welded Stainless Steel Mechanical TubingSpecification for General Requirements for Stainless Steel Wire and Wire RodsSpecification for Carbon and Alloy Steel NutsSpecification for Carbon and Alloy Steel Nuts [Metric]Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolledand Cold-Rolled, General Requirements forSpecification for High-Strength Low-Alloy Columbium-Vanadium Structural SteelSpecification for Alloy Steel Socket-Head Cap ScrewsSpecification for Alloy Steel Socket-Head Cap Screws [Metric]Specification for Steel Bars, Carbon, Merchant Quality, M-GradesSpecification for Stainless Steel WireSpecification for Free-Machining Stainless Steel BarsSpecification for Zinc-Coated Parallel and Helical Steel Wire Structural StrandSpecification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] MinimumYield Point, with Atmospheric Corrosion ResistanceSpecification for Zinc-Coated Steel Structural Wire RopeSpecification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled,with Improved Atmospheric Corrosion ResistanceSpecification for Deformed and Plain Carbon-Steel Bars for Concrete ReinforcementSpecification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural TubingSpecification for Tin Mill Products, Black Plate, Single-ReducedTest Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and CorrectionalFacilitiesSpecification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural,High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, GeneralRequirements forSpecification for Zinc–Coated (Galvanized) Carbon Steel WireSpecification for Pressure Vessel Plates, 5 % and 5 1 2 % Nickel Alloy Steels, Specially HeatTreatedSpecification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated(Galvannealed) by the Hot-Dip ProcessSpecification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with ImprovedFormabilitySpecification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, andFlat BarSpecification for Steel Forgings, Carbon and Alloy, for General Industrial UsePractice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other LiquidsSpecification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical PropertiesSpecification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and SheetPiling with Atmospheric Corrosion Resistance for Use in Marine EnvironmentsSpecification for Steel Castings, General Requirements, for Pressure-Containing PartsSpecification for Welded Steel Plain Bar or Rod Mats for Concrete ReinforcementSpecification for Low-Alloy Steel Deformed and Plain Bars for Concrete ReinforcementSpecification for Ductile Iron Culvert PipeSpecification for Uncoated High-Strength Steel Bars for Prestressing Concretevii
CONTENTSAA733 – 03743 / A 743M – 06AA746 – 03755 / A 755M – 03AA760 / A 760M – 06764 – 07AAAAA767 / A 767M – 05775 / A 775M – 06778 – 01780 – 01(2006)786 / A 786M – 05AAA792 / A 792M – 06a793 – 96(2001)794 – 06A795 / A 795M – 04AAA798 / A 798M – 01809 – 03817 – 03AAA820 / A 820M – 06824 – 01847 / A 847M – 05AAA857 / A 857M – 07861 – 04865 / A 865M – 06AAA875 / A 875M – 06884 / A 884M – 06888 – 07aAAA898 / A 898M – 91(2001)899 – 91(2002)913 / A 913M – 04A 924 / A 924M – 07A 929 / A 929M – 01A 934 / A 934M – 04A 951 / A 951M – 06A 959 – 04A 992 / A 992M – 06aA 996 / A 996M – 06aA 1003 / A 1003M – 05A 1008 / A 1008M – 07A 1011 / A 1011M – 06bBBBBBBBBBBB1 – 012 – 00(2005)e13 – 018 – 0416 / B 16M – 0519 – 0526 / B 26M – 0529 – 0330 – 06a32 – 0433 – 04Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe NipplesSpecification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, forGeneral ApplicationSpecification for Ductile Iron Gravity Sewer PipeSpecification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by theCoil-Coating Process for Exterior Exposed Building ProductsSpecification for Corrugated Steel Pipe, Metallic-Coated for Sewers and DrainsSpecification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size forMechanical SpringsSpecification for Zinc-Coated (Galvanized) Steel Bars for Concrete ReinforcementSpecification for Epoxy-Coated Steel Reinforcing BarsSpecification for Welded, Unannealed Austenitic Stainless Steel Tubular ProductsPractice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized CoatingsSpecification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy SteelFloor PlatesSpecification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip ProcessSpecification for Rolled Floor Plate, Stainless SteelSpecification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Ro
ASTM STANDARDS IN BUILDING CODES SPECIFICATIONS, TEST METHODS, PRACTICES, CLASSIFICATIONS, TERMINOLOGY VOLUME 1 2007 Forty-fourth Edition ASTM Stock Number: BLDG07 ASTM INTERNATIONAL n 100 BARR HARBOR DRIVE, PO BOX C700, WEST CONSHOHOCKEN, PA 19428-2959 TEL: 610-832-9500 n FAX: 610-832-9555 n EMAIL: service@astm.org n WEBSITE: www.astm.org. Editorial Staff Director: Vernice A. Mayer Editors .
ASTM C42 ASTM C293 ASTM C457 7066 SW 44th ST Miami, FL 33155 Contact: Andres Diaz Abdias H. Saenz, P.E. ASTM C215 Ph 305-668-5792 Fax 786-513-3754 ASTM C900 ASTM C4435 ASTM C597 ASTM C642 Jaime Reyes, P.E. ASTM C174 ASTM C215 ASTM D698 ASTM D2167 ASTM C1585 ASTM D4263 ASTM D4564 ASTM D4580 ASTM C1740 ASTM D4263 ASTM
astm a 966, 135, 136 astm d 1298, 139 astm d 1500, 139 astm d 2161, 141 astm e 1025, 63 astm e 1032, 59 astm e 11, 136, 137 astm e 1135, 102, 107 astm e 1316, 80 astm e 1416, 59 astm e 1417, 106–108, 114 astm e 1444, 131–138, 141, 142 astm e 1647, 69 astm e 165, 109, 115 astm e 1742, 59 astm e 709, 132 astm e
*astm a182 *astm a564 *astm a213 astm a778 *astm a249 asms-5613 *astm a269 asms-5639 *astm a276 asms-5640 *astm a312 asms-5647 . astm a512 cdbw & cdew astm a513 dom astm a519 cdsm sae j524/j525 hydraulic ams 5050 fluid line specification astm a135 astm a178 grd a astm a214 astm a500 grd b astm a513 type 1,2 awwa c200
JIS G3459, JIS G3463. GOST 9940, GOST 9941 Nickel Alloy Pipe Specification: ASTM B111, ASTM B161, ASTM B163, ASTM B165, ASTM B167, ASTM B338, ASTM B407, ASTM B423, ASTM B444, ASTM B619, ASTM B622, ASTM B626, ASTM B668, ASTM B677, ASTM B829 or Standards stipulated in the technical agreement. Add：No.3, Jiangnan Road, Jiangnan Industrial Park, Songyang, Zhejiang Province, China Cell: 86-159 .
ASTM D 1056 ASTM D 1056 ASTM D 412 ASTM D 412 ASTM E 162 ASTM E 662 SMP-800- C ASTM E 595 ASTM E 595 ASTM E 595 Rogers Internal ASTM D 746 ASTM D 150 ASTM D 149 ASTM D 495 ASTM D 257 ASTM C 518 Flame Resistance Flame Spread Index (Is) Smoke Density (Ds) Toxic Gas Emissions Rating Total Mass Loss Collected Volatile Condensible Materials (CVCM) Water
ASTM A335 Gr P9 ASTM A234 Gr WP9 ASTM A182 Gr F9 ASTM A217 Gr C12 Carbon Steel ASTM A333 Gr 6 ASTM A420 Gr WPL6 ASTM A350 Gr LF2 ASTM A352 Gr LCB ASTM A320 Gr L7 Alloy ASTM A194 Gr 7 Low-Temp ASTM A333 Gr 3 ASTM A420 Gr WPL3
ASTM D638 TAS201 ASTM F476 TL-144 International Accreditation ASTM C1167 ASTM E773 ASTM E783 ASTM E987 ASTM E1105 ASTM E1886 Certificate of Accreditation Services Inc. TAS203 ASTM B117 ASTM C39 UL 580 UL 1897 ASTM G154 ASTM D635 ASTM G85 ASTM D790 TAS201 TAS202
Flexural (ASTM D790), Tensile (ASTM D638) Adhesion (ASTM D4541 and ASTM D3359) Sag resistance Dry film thickness Adhesion Hydrostatic leakage test (ASTM F1216) CIPP ASTM D5813 ASTM F1216 ASTM F1743 ASTM F2019 Tensile (ASTM D638 and ASTM D2290) Flexural (ASTM D790) Tensile Creep (ASTM D2990) Burst (ASTM D1599)
