Goulds Water Technology
Goulds Water TechnologyResidential Water SystemsAPPLICATIONSADDITIONAL COMPONENTS REQUIREDSpecifically designed for: Homes Farms Cottages Booster service Shallow Well Package: Includes shallow well adapter,nozzle, venturi (diffuser), gasket, boltsand pipe plugs OR Deep Well Package: Choose either a twin pipe orpacker style. Twin pipe includes jet body, nozzle, venturi (diffuser) and foot valve. Packer includes packer body, nozzle, venturi (diffuser), and built-in check valve.NOTE: Packer systems also require a packer adapteron the wellhead.Deep well systems require a pressure control valve.NOTE: YOU MUST HAVE A JDW OR AV22 KIT TOMAKE THE PRESSURE SWITCH CONNECTION.SPECIFICATIONSPump: Pipe connections: 1¼" NPT suction, 1" NPT discharge,1" NPT drive (pressure) Pressure switch: AS4 preset at 30-50 PSIMotor: NEMA standard 60 Hz ½ – 1½ HP, 115/230 V capacitor start Single phase 3500 RPM Built-in overload with automatic reset Stainless steel shaft Rotation: clockwise when viewed from motor end UL778 listedMaximum temperature: 140 FPressure tank required on all systems.MODEL INFORMATIONCSA ListedOrder No.U.L. Listed (Indoor use)①Order No.HPJ5J5UL½¾J7J7ULJ10J10NUL1J15J15UL1½SYSTEM COMPONENTS Basic Pump Unit: Includes pump and motor, pressure gauge and bushing, pressure switch with tubing and fittings.NOTE: THE TUBING COMES CONNECTED FORSHALLOW WELL USE. A DEEP WELL SET UP REQUIRES A JDW FITTINGS PACKAGE OR AN AV22KIT.Both include additional fittings and a 24" tubing toconnect to a pressure control valve.SHALLOW WELL PERFORMANCE RATINGSHP/Model½ HP – J5½ HP – J5Shallow WellFH5FH5H (High Pressure D3528Discharge Pressure – PSIDischarge Pressure – PSIMax. 20 30 40 50 60Max.20 30 40 50Total SuctionShutShutGallons peroffoffLift (feet)Gallons per minuteminute(PSI)(PSI)517.5 16.5 10.2 5.0 63 11.5 11.3 11.0 7.7 4.8 831015.7 14.4 9.2 4.3 61 10.3 10.0 9.6 7.0 4.2 811513.7 12.5 8.0 3.6 59 8.8 8.6 8.3 6.3 3.7 792011.5 10.4 7.1 2.3 57 7.0 7.0 6.8 5.8 3.2 76258.7 8.6 6.2 1.3 54 5.3 5.2 5.2 5.0 2.8 73PAGE 2¾ HP – J71 HP – J101½ HP – J15FH7FH10FH154K62AN018AD3536Discharge Pressure – PSIMax.30 40 50 60ShutGallons peroffminute(PSI)21.3 18.3 12.5 6.6 7018.8 17.3 11.3 5.0 6816.4 15.5 9.6 3.7 6613.6 13.2 8.3 2.0 6310.0 9.9 6.4 1.0 59AN018AD3538Discharge Pressure – PSIMax.30 40 50 60ShutGallons peroffminute(PSI)24.8 24.4 16.6 9.9 7422.9 22.2 15.8 8.6 7219.8 19.5 13.8 6.9 7016.6 16.6 12.2 5.6 6712.5 12.4 10.4 3.6 65AN022AD3542Discharge Pressure – PSI30 40 50 60 Max.ShutGallons peroffminute(PSI)26.6 26.3 25.0 15.6 8024.7 24.3 22.6 13.9 7721.6 21.5 20.4 12.9 7518.1 18.0 17.6 12.0 7314.0 14.0 14.0 10.1 71
Goulds Water TechnologyResidential Water SystemsTWIN PIPE PERFORMANCE RATINGSDepth to Jet Assembly(based on submergence of 5 feet)HP/Model½ HP – J5¾ HP – J71 HP – J101½ HP – J15Well Casing min. I.D.44½44½44½4½Pressure11¼11¼11¼1¼PipeSize (in.)Suction1¼1½1¼1½1¼1½1½➀ Jet Assembly Package FT4-13 FT4-31 FT4-08 FT5-14 FT4-14 FT4-34 FT4-18 FT5-47 FT5-48 FT4-44 FT4-43 FT4-18 FT5-49 FT5-11 FT5-12 FT5-11Jet Body (only)AT4AT5AT4AT5AT4AT5AT5NozzleAN017 AN016 AN015 AN018 AN017 AN016 AN016 AN018 AN017 AN017 AN017 AN016 AN019 AN018 AN019 AN018VenturiAD726 AD723 AD720 AD724 AD729 AD725 AD722 AD730 AD725 AD730 AD727 AD722 AD732 AD727 AD734 AD72730303030282930283031333530323540➁ Control Valve Setting (PSI)FeetGallons Per Minute (GPM) 30-50 PSI Pressure Switch Setting30 13.0 11.015.816.617.019.321.240 016.1607.05.26.410.213.011.5 11.214.315.0704.75.68.211.0 10.09.312.614.0 11.2803.84.86.58.67.36.210.0 170NOTE: An offset of 50 feet will result in a decrease of about 25% from ratings as shown.➀ Jet assembly package includes jet body (AT4), venturi, nozzle and foot valve.➁ Deep well jet pumps require a pressure control device on the discharge to provide back pressure to the jet assembly. Failure to controlthe amount of discharge by adjusting the back pressure (pressure control valve setting) will cause the pump to lose prime. On pumps withIow control valve settings, up to 40 psi, a simple ball valve or AV15 will work. On systems with control valve settings of 40 - 80 psi an AV22,AV22KIT or AV21 is required. They measure the pressure on the outbound side so that the high pressure does not open the 30-50 psiswitch and turn the pump off.PACKER SYSTEM PERFORMANCE RATINGSDepth to Jet Assembly(based on submergence of 5 feet)HP/Model½ HP – J5¾ HP – J71 HP – J101½ HP – J15Well Casing2323233Suction1¼1½1¼1½1¼1½1½Pipe Size (in.)Jet AssemblyFP2-13 FP2-31 FP2-08 FP3-36 FP3-24 FP2-40 FP2-47 FP3-53 FP3-54 FP2-48 FP2-43 FP3-55 FP3-14 FP3-16 FP3-18 FP3-21 FP3-24Package ➀Jet Body (only)AP2AP3AP2AP3AP2AP3AP3NozzleAN017 AN016 AN015 AN021 AN018 AN015 AN015 AN018 AN017 AN016 AN016 AN019 AN018 AN019 AN021 AN023 AN018VenturiAD726 AD723 AD720 AD730 AD724 AD727 AD723 AD730 AD725 AD729 AD725 AD732 AD727 AD735 AD723 AD731 AD724Control Valve3030303030303227303536283234343439Setting (PSI) ➁FeetGallons Per Minute (GPM) 30-50 PSI Pressure Switch 020.2606.74.88.86.59.07.813.511.09.215.316.9 15.0704.37.35.67.111.5 9.89.012.714.4803.54.85.18.67.310.2 10.312.9904.37.35.68.810.9 305.85.01404.74.51503.44.01603.31702.8NOTE: An offset of 50 feet will result in a decrease of about 25% from ratings as shown. Special turned (diameter) couplings are required on2" packer systems, order no. 64655 in Jet and Sub price book.➀ Jet Assembly Package includes jet body, AP2 or AP3; built-in check valve, nozzle and venturi.➁ Same as abovePAGE 3
Goulds Water TechnologyResidential Water SystemsAPPLICATIONSREQUIRED SYSTEM COMPONENTSSpecifically designed for: Homes Farms Cottages Basic Pump Unit: Includes pump, motor, pressureswitch, tubing, fittings, pressure gauge, bushing andpressure control valve (AV21). Deep Well Jet Assembly Package: Twin Pipeincludes: Jet body, nozzle, venturi and foot valve.Packer includes: Jet body with built-in check valve,nozzle and venturi. See Performance Charts onfollowing pages for Jet Assembly package ordernumbers.SPECIFICATIONSPumpPipe connection:1" NPT drive (pressure)1¼" NPT suction1" NPT discharge.Pressure switch: AS4, preset (30-50 PSI).ADDITIONAL ACCESSORIES REQUIREDMotor NEMA standard. ½–1 HP, 115/230 V, 60 Hz, capacitor start. Single phase, 3500 RPM. Built-in overload with automatic reset. Stainless steel shaft. Rotation: clockwise when viewed from motor end.For Packer: well casing adapter AWD2 (2") or AWD3(3"). Must be ordered separately.AGENCY LISTINGSCanadian Standards Association ULUnderwriters Laboratories① Maximum temperature: 140 FPERFORMANCE RATINGS – TWIN PIPE SYSTEMSHP/Model½ HP-VJ05¾ HP-VJ07Well CasingMin. I.D. (In.)1HP-VJ104PressurePipeSize In.Suction11¼Jet AssemblyFT4-46FT4-08FT4-47FT4-46FT4-06Package ➀Jet Body (only) 4AD722AD720Control Valve233440Setting (PSI) ➁FeetFT4-14FT4-09AN017AD729AN015AD7213436Gallons per Minute 30-50 Pressure Switch Setting12.2 15.2 18.84011.7 13.2 16.75010.0 11.7 15.08.2Depth to Jet Assembly(based on submergence of 5 feet)30608.39.710.012.770 5.8 8.3 10.080 5.0 7.1 7.990 3.8 5.85.85.35.8100 5.05.0110 3.84.61203.3NOTE: An offset of 50 feet will result in a decrease of about 25% from ratings as shown.➀ Jet assembly package includes jet body (AT4), venturi, nozzle and foot valve.➁ Deep well jet pumps require a pressure control device on the discharge to provide back pressure to the jet assembly. Failure to control theamount of discharge by adjusting the back pressure (pressure control valve setting) will cause the pump to lose prime. The AV21 measuresthe pressure on the outbound side so that the high pressure does not open the 30-50 psi switch and turn the pump off.PAGE 2
Goulds Water TechnologyResidential Water SystemsCOMPONENTSItem No.DIMENSIONS AND WEIGHTS87DescriptionHP/Model½-VJ051Mechanical sealWeight502ImpellerLength3Diffuser (Guidevane)4Pressure control valve5Motor adapter6Casing7Stainless steel shaft8Pressure switch2¾-VJ071-VJ10535612¾Width 12¾1Height34513½14¼14¾Pressure control valve not included in dimensions.(All dimensions are in inches and weights in lbs. Donot use for construction purposes.)6MODEL INFORMATIONCSA ListedOrder No.VJ05VJ07VJ10U.L. Listed (Indoor use)①Order No.VJ05ULVJ07ULVJ10ULHP½¾1PERFORMANCE RATINGS – PACKER SYSTEMHP/Model½ HP-VJ05Well Casing (In.)2¾ HP-VJ07321HP-VJ103PipeSuction1¼1½1¼1½Size In.Jet AssemblyPackage ➀231¼1½FP2-38 FP2-08 FP3-42 FP3-09 FP2-50 FP2-47 FP2-09 FP3-40 FP3-43 FP2-48 FP2-43 FP2-08 FP3-40 FP3-49Jet Body (only)AP2AP3AP2AP3AP2AP3AN013 AN014AN016AN015NozzleAN014 AN015 AN014 AN016 AN013VenturiAD722 AD720 AD722 AD721 AD724 AD723 AD721 AD724 AD721 AD729 AD725 AD720 AD724 AD723Control Valve ➁Setting (PSI)AN0152334Feet3634Gallons per Minute 30-50 Pressure Switch Setting3012.2 12.5 15.2 15.8 18.8 18.84010.8 11.3 13.2 13.7 16.7 16.7509.0 10.0 11.3 11.7 14.2 15.0607.570 5.5 6.8 8.7 9.6 9.3 10.080 4.6 5.8 6.8 8.2 7.7 8.3Depth to Jet Assembly(based on submergence of 5 feet)367.78.28.39.310.3 10.010.311.711.012.590 3.4 4.3 5.3 6.7 5.7 6.3100 3.5 4.0110 3.3 4.3 3.3 5.0120 2.3 3.3 2.9 4.21302.93.31402.94.2 5.4 4.66.54.6 5.8NOTE: An offset of 50 feet will result in a decrease of about 25% from ratings as shown. Special turned (diameter) couplings are required on2" packer systems, order no. 64655 in Jet and Sub price book.➀ Jet Assembly Package includes jet body, AP2 or AP3; built-in check valve, nozzle and venturi.➁ Deep well jet pumps require a pressure control device on the discharge to provide back pressure to the jet assembly. Failure to control theamount of discharge by adjusting the back pressure (pressure control valve setting) will cause the pump to lose prime. The AV21 measuresthe pressure on the outbound side so that the high pressure does not open the 30-50 psi switch and turn the pump off.PAGE 3
Goulds Water TechnologyResidential Water SystemsPERFORMANCE RATINGS — TWIN PIPE SYSTEMSHP/Model¾ HP – SJ071 HP – SJ101½ HP – SJ15WellCasingMin. I.D. in.Pressure PipeSizeSuction(in.)Jet AssemblyPackage ➀411¼FT4-48 FT4-47 FT4-06FT4-47FT4-24FT4-08Jet ozzleAN012 AN013AN014VenturiAD727 AD724AD720ControlValve Setting(PSI) ➁FeetDepth to Jet Assembly(based on submergence of 5 feet)2 HP – SJ20AN013AN015AD72437 767880Gallons Per Minute (GPM) 30-50 Pressure Switch Setting3015.2 16.0 13.0 13.04013.5 15.2 13.0 13.05011.8 14.7 13.0 13.06010.7 13.7 12.8 12.8708.59.0 11.711.7 12.212.880 7.5 10.5 10.6 12.090 6.26.2 9.0 9.29.3 11.3100 5.8 7.5 9.0 9.59.5110 5.0 6.36.0 8.0 9.4120 4.6 5.0 7.0 8.5130 4.0 4.3 6.25.8 7.7140 4.0 5.66.8150 3.5 5.2 6.05.7160 4.75.5170 4.25.3180 3.75.0190 3.24.72003.8NOTE: An offset of 50 feet will result in a decrease of about 25% from ratings as shown.➀ Jet assembly package includes jet body (AT4), venturi, nozzle and foot valve.➁ Deep well jet pumps require a pressure control device on the dischargeto provide back pressure to the jet assembly. Failure to control theamount of discharge by adjusting the back pressure (pressure controlvalve setting) will cause the pump to lose prime. On pumps with Iowcontrol valve settings, up to 40 psi, a simple ball valve or AV15 will work.On systems with control valve settings of 40 - 80 psi an AV22, AV22KITor AV21 is required. They measure the pressure on the outbound side sothat the high pressure does not open the 30-50 psi switch and turn thepump off.VENTURINOZZLEJET BODYFOOT VALVEPAGE 2
Goulds Water TechnologyResidential Water SystemsPERFORMANCE RATINGS — PACKER SYSTEMHP/Model¾ HP SJ07Well Casing In.2321 HP SJ10321½ HP SJ15322 HP SJ203PipeSuction Size(in.)1¼1½1¼1½1¼1½1¼1½Jet AssemblyPackage ➀ FP2-51 FP2-50 FP2-06 FP3-40 FP3-42 FP2-50 FP2-07 FP2-08 FP3-40 FP3-49 FP2-49 FP2-30 FP2-29 FP3-47 FP3-46 FP3-34 FP2-49 FP2-30 FP2-29 FP3-47 FP3-46FP3-34Jet BodyAP2AP3AP2AP3AP2AP3AP2AP3(Only)NozzleAN012 AN013 AN014 AN013 AN014 AN013 AN014 AN015 AN013 AN015VenturiAD727 AD724 AD720 AD724 AD722Pressure ➁Control ValveSetting (PSI)Feet36AN013AD720 AD724 AD723 AD726 AD722 AD719 AD727 AD722 AD719 AD726 AD722 AD719 AD727 AD722 AD719404540436265676264667678807530 14.9 15.3 15.8 16.3 13.0 14.7 13.0 14.740 13.1 13.5 14.0 16.0 13.0 14.5 13.0 14.750 11.6 12.5 12.5 15.5 12.9 14.3 13.0 14.760 10.5 12.2 11.2 11.3 14.2 12.7 14.3 13.0 14.57080 7.6 10.2 8.5 8.7 10.0 10.2 12.2 11.8 13.57880Gallons Per Minute 30-50 Pressure Switch SettingDepth to Jet Assembly(based on submergence of 5 feet)40AD7248.48.8 11.8 10.0 12.5 11.8 14.2 12.8 14.590 6.1100 5.7 6.9 5.5 8.2 8.3 7.86.2 7.8 7.3 8.39.08.39.1 10.0 10.5 12.7110 4.3 6.0 4.2120 3.8 5.3 4.0 6.7 6.2 7.6 7.9 9.1130 2.2 4.5 3.5 5.8 5.4140 3.0 4.8 5.3 6.2 6.0 8.29.1 8.59.1 10.54.8 7.3 7.3 8.8 8.9 8.39.15.6 6.9 6.9 8.8150 2.4 4.1 4.8 5.45.6 5.25.6 33.85.52003.83.35.32103.34.82204.52304.0NOTE: An offset of 50 feet will result in a decrease of about 25% from ratings as shown. Special turned (diameter) couplings are required on2" packer systems, order no. 64655 in Jet and Sub price book.➀ Jet Assembly Package includes jet body, AP2 or AP3; built-in check valve, nozzleand venturi.➁ Deep well jet pumps require a pressure control device on the discharge toprovide back pressure to the jet assembly. Failure to control the amount of discharge by adjusting the back pressure (pressure control valve setting) will causethe pump to lose prime. On pumps with Iow control valve settings, up to 40 psi,a simple ball valve or AV15 will work. On systems with control valve settings of40 - 80 psi an AV22, AV22KIT or AV21 is required. They measure the pressure onthe outbound side so that the high pressure does not open the 30-50 psi switchand turn the pump off.VENTURINOZZLEPACKER BODYFOOT VALVE(POPPET)LEATHER CRIMPSPACERLEATHER CRIMPVALVE SEATPAGE 3
Goulds Water TechnologyResidential Water SystemsVENTURIDeep WellTwin Pipe SystemNOZZLE4K107STRAINER(OPTIONAL)JET BODYFOOT VALVEPERFORMANCE RATINGS — TWIN PIPE SYSTEMS – 4” WELLDepth to Jet Assembly(based on submergence of 5 feet)HP/Model¾ HP – HSJ07N1 HP – HSJ10N1½ HP – HSJ15N2 HP – HSJ20NJet AssemblyFT4-48 FT4-47 FT4-06 FT4-47 FT4-24 FT4-08 FT4-45 FT4-30FT4-29 FT4-45 FT4-30 FT4-29Package ➀Pressure1"PipeSuction Size (in.)1¼"NozzleAN012AN013 AN014 26AD722AD719AD726 AD722AD719Pressure ControlValve Setting374043626567767880(PSI) ➁FeetGallons Per Minute (GPM) 30-50 Pressure Switch .25.31803.75.01903.24.52003.8NOTE: An offset of 50 feet will result in a decrease of about 25% from ratings as shown.➀ Jet assembly package includes jet body (AT4), venturi, nozzle and foot valve.➁ Deep well jet pumps require a pressure control device on the discharge to provide back pressure to the jet assembly. Failure to control the amountof discharge by adjusting the back pressure (pressure control valve setting) will cause the pump to lose prime. On pumps with Iow control valvesettings, up to 40 psi, a simple ball valve or AV15 will work. On systems with control valve settings of 40 - 80 psi an AV22, AV22KIT or AV21 isrequired. They measure the pressure on the outbound side so that the high pressure does not open the 30-50 psi switch and turn the pump off.PAGE 5
Goulds Water TechnologyResidential Water SystemsVENTURINOZZLEJET BODYBUILT INFOOT VALVELEATHER CRIMPDeep WellPacker SystemSPACERLEATHER CRIMPFITTINGPERFORMANCE RATINGS — PACKER SYSTEMHP/Model¾ HP – HSJ07N1 HP – HSJ10N1½ HP – HSJ15N2 HP – HSJ20NWell Casing (in.)23232323PipeSuction Size(in.)1¼1½1¼1½1¼1½1¼1½Jet Assembly FP2- FP2- FP2- FP3- FP3- FP2- FP2- FP2Package ➀51 50 0640 425007 08Jet Body(Only)AP2FP340AP3 AP2FP3- FP2- FP2494930AP3 AP2 AP3 AP2 AP3NozzleAN012 AN013 AN014 AN013 AN014 AN013 AN014 AN015 AN013 AN015VenturiAD727 AD724 AD720 AD724 AD722Pressure ➁Control ValveSetting (PSI)3640AN013AD720 AD724 AD723 AD726 AD722 AD719 AD727 AD722 AD719 AD726 AD722 AD719 AD727 AD722 AD7197880Feet30 14.9 15.3 15.8 16.3 13.0 14.7 13.0 14.740 13.1 13.5 14.0 16.0 13.0 14.5 13.0 14.750 11.6 12.5 12.5 15.5 12.9 14.3 13.0 14.760 10.5 12.2 11.2 11.3 14.2 12.7 14.3 13.0 14.570 8.4 8.8 11.8 10.0 12.5 11.8 14.2 12.8 14.5807.6 10.2 8.58.7 10.0 10.2 12.2 11.8 13.5906.0 6.27.87.38.3 9.0 8.3 9.1 10.0 10.5 12.71005.76.95.58.28.37.8 9.18.5 9.1 10.51104.36.04.2 4.87.37.38.88.98.3 9.11203.85.34.06.76.27.67.99.11302.24.53.55.85.4 5.66.96.98.81403.04.85.36.26.08.21502.44.14.85.4 5.65.2 epth to Jet Assembly(based on submergence of 5 feet)40AD724FP2- FP3- FP3- FP3- FP2- FP2- FP2- FP3- FP3- FP329474634493029 4746 3445404362656762646676788075Gallons Per Minute (GPM) 30-50 Pressure Switch SettingNOTE: An offset of 50 feet will result in a decrease of about 25% from ratings as shown. Special turned (diameter) couplings are required on 2"packer systems, order no. 64655 in Jet and Sub price book.➀ Jet Assembly Package includes jet body, AP2 or AP3; built-in check valve, nozzle and venturi.➁ Deep well jet pumps require a pressure control device on the discharge to provide back pressure to the jet assembly. Failure to control the amountof discharge by adjusting the back pressure (pressure control valve setting) will cause the pump to lose prime. On pumps with Iow control valvesettings, up to 40 psi, a simple ball valve or AV15 will work. On systems with control valve settings of 40 - 80 psi an AV22, AV22KIT or AV21 isrequired. They measure the pressure on the outbound side so that the high pressure does not open the 30-50 psi switch and turn the pump off.PAGE 6
PAGE 2. Residential Water Systems Goulds Water Technology. HP/Model ½ HP-VJ05 ¾ HP-VJ07 1HP-VJ10 Well Cas
Goulds Pumps is a brand of ITT Residential and Commercial Water. Goulds Pumps es una marca de fábrica de ITT Agua Residencial y Comercial. www.goulds.com Engineered for life Goulds Pumps G&L Series NPE 316L SS NPE Series End Suction Centrifugal Pumps Bombas Centrífugas de
Goulds Pumps is a brand of ITT Corporation. Goulds Pumps es una marca de fábrica de ITT Corporation. www.goulds.com Engineered for life Goulds Pumps G&L Series NPE 316L SS NPE Series End Suction Centrifugal Pumps Bombas Centrífugas de Succión Final Serie NPE BNPE
Goulds Pumps 7v ITTIndustries 'vV Engineeredforlife Goulds Model VIISVertical Cantilever Recessed Impeller Pumps BULLETIN221.1 GOULDS PUMPS February2001 Lenntech info@lenntech.com Tel. 31-152-610-900 www.lenntech.com Fax. 31-152-616-289 info@lenntech.com Tel. 31-152-610-900 www.lenntech.com Fax. 31-152-616-289 Lenntech
Warranty is valid only when genuine Goulds Water Technology parts are used. Use of the equipment on a service other than stated in the order will nullify the warranty, unless written approval is obtained in advance from Goulds Water Technology. For information or questions not covered in this manual, contact Goulds Water Technology at (806) 743 .
Goulds Pumps G&L SERIES MODEL SSV Installation, Operation and Maintenance Instructions Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered for life Commercial Water. 2 SERIES/SÉRIE/SERIES 1SV 3SV 33SV 66SV 2SV 4SV 46SV 92SV Pump Mo
JET PUMP REPAIR PARTS Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered for life Residential Water Systems. ITT GOULDS PUMPS Residential Water Systems . 25 Pump foot bolt Steel 13K252 13K252 26 Switch con. with locknut Steel 6K24 6K24 27 Fillister head machine screw Stainless steel 13K4 13K4 .
Goulds Pumps AquaBoost II Controller Variable Speed Pump Control Installation, Operation & Maintenance Models Covered: 3 & 5 HP 3AB2 (10.9A) 3AB2W (10.9A) 5AB2 (16.6A) Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered for life Residential & Commercial Water Systems CUS Tested to UL 778, 508C and CSA 22.2
Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps Bombas de Succión Final de 316 Acero Inoxidable Grupo-M y S Goulds Pumps is a brand of ITT Residential and Commercial Water. Goulds Pumps es una marca de fábrica de ITT Agua Residencial y Industrial. www.
