Catalogue Engine Perkins 1506A-E88TAG5
15001506A-E88TAG5Used for 300kVA generatorSeries299 kWm standby @ 1500 rpm345 kWm standby @ 1800 rpmBasic technical dataCentre of gravityNumber of cylinders. . . . . . . . . . . . . . . . . . . . . . . .6Cylinder arrangement . . . . . . . . . . . . . . . . . . . In-lineCycle . . . . . . . . . . . . . . . . . . . . . . . .4 strokeInduction system. . . . . . . . . . Air to air after cooled, turbochargedCompression ratio . . . . . . . . . . . . . . . . . . . .16.1:1Bore . . . . . . . . . . . . . . . . . . . 112 mm (4.41 inches)Stroke . . . . . . . . . . . . . . . . . . 149 mm (5.87 inches)Displacement. . . . . . . . . . . . . . 8.8 litres (537.0 inches³)Direction of rotation. . . . . . . . . . Anticlockwise facing flywheelFiring order (number 1 cylinder furthest from flywheel) . . .1, 5, 3, 6, 2, 4Estimated total weight of ElectropaK (dry) . . . . . . . . . . 1183 kgEstimated total weight of ElectropaK (wet). . . . . . . . . .1253 kgOverall dimensionsLength, front of radiator to rear of air cleaner . . . . . . . . . 2032 mmWidth . . . . . . . . . . . . . . . . . . . . . . 1091 mmHeight, including radiator support brackets . . . . . . . . . . 1320 mmMoments of rotational inertia (mk²)Engine . . . . . . . . . . . . . . . . . . . . . . .0.7361 Nms²Flywheel SAE14 . . . . . . . . . . . . . . . . . . . 1.667 Nms²Forward of rear face of cylinder block. . . . . . . . . . . . 413 mmAbove crankshaft centre line. . . . . . . . . . . . . . . . 231 mmOffset RHS of centre line . . . . . . . . . . . . . . . . . .-1 mmPerformanceAll ratings certified to within . . . . . . . . . . . . . . . . . 3%Speed variation at constant load. . . . . . . . . . . . . 0.25%Note:Note:Note:Data based on ISO/TR14396, SAE J1995 3.1, ISO3046-1.Engine speed control in accordance with BS5514 pt.4;ISO3046-4 and ISO8528-5.Electrical ratings are based on average alternator efficiencyand are for guidance only.Test conditionsAir temperature . . . . . . . . . . . . . . . . . . . . . . 25 CBarometric pressure. . . . . . . . . . . . . . . . . . . . 100 kPaRelative humidity. . . . . . . . . . . . . . . . . . . . . 35%Air inlet restriction at maximum power (nominal) . . . . . 3.7 kPaExhaust back pressure at maximum power (nominal) . . . . . . 10 kPaFuel temperature (inlet pump). . . . . . . . . . . . . . . 40 CNote:If the engine is to operate in ambient conditions other thanthose of the test conditions, suitable adjustments must bemade for these changes.For full details, contact Perkins Technical Service Department.1 of 12Publication No. TPD1953, December 2014.Copyright 2014 Perkins Engines Company Limited, all rightsreserved. No part of this document may be reproduced in any formor by any means, without prior written permission of Perkins EnginesCompany Limited. The information in this document is substantiallycorrect at the time of printing and may be altered subsequently.Perkins Engines Company LimitedPeterborough, PE1 5FQ, United KingdomTel: 44 (0)1733 583000Fax: 44 (0)1733 582240www.perkins.com
General installation1506A-E88TAG5Type of operation and applicationDesignationUnitsStandby PowerPrime PowerStandby PowerGross engine powerkWb307281358Fan powerkWm881313ElectropaK nett engine powerkWm299273345312246250 Hz @ 1500 rpmGross BMEPCombustion air flowExhaust gas temperature after turbo(Max.)Exhaust gas flow, wetPrime Power60 Hz @ 1800 294120116701564 316293.6Boost pressure ratio3.63.33.9%42424141Mean piston speedm/s7.47.48.98.9Engine coolant flowl/min140140190190Cooling fan air 338%90909090Prime PowerStandby PowerOverall thermal efficiency (nett)Typical Genset electrical output (0.8pf)Assumed alternator efficiencyEnergy balanceDesignationUnitStandby Power50 Hz @ 1500 rpmPrime Power60 Hz @ 1800 rpmEnergy in fuelkWt731665857769Energy in power output (at shaft)kWb299273345312Energy to coolantkWt125115138130Energy to exhaustkWt221202259227Energy to ACCkWt61508671Energy to cooling fankWm881313Energy to radiationkWt17171616Note:The above data is based on 42,770KJ/Kg calorific value for diesel conforming to specification BS2869 Class A2.Rating definitionsPrime powerVariable load. Unlimited hours usage with an average load of 70% of the published prime power rating. A 10% overload is availablefor 1 hour in every 12 hours of operation.Standby powerVariable load. Limited to 500 hours annual usage up to 300 hours of which may be continuous running. No overload is permitted.2 of 12Publication No. TPD1953, December 2014.Copyright 2014 Perkins Engines Company Limited, all rightsreserved. No part of this document may be reproduced in any formor by any means, without prior written permission of Perkins EnginesCompany Limited. The information in this document is substantiallycorrect at the time of printing and may be altered subsequently.Perkins Engines Company LimitedPeterborough, PE1 5FQ, United KingdomTel: 44 (0)1733 583000Fax: 44 (0)1733 582240www.perkins.com
Cooling systemNormal operating angles:Total coolant capacity. . . . . . . . . . . . . . . . . . . . .33.2 litresEngine . . . . . . . . . . . . . . . . . . . . . . . . . . 13.9 litresRadiator . . . . . . . . . . . . . . . . . . . . . . . . . 15.5 litresPipes and hoses . . . . . . . . . . . . . . . . . . . . 3.84 litresMaximum top tank temperature . . . . . . . . . . . . . . . . . .107 CMaximum static pressure head on pump. . . . . . . . . . . . .N/A kPaThermostat operating range . . . . . . . . . . . . . . . 87 - 98 CCoolant flow, against 30 kPa restriction @ 1500 rpm . . . .140 litres/minCoolant flow, against 30 kPa restriction @ 1800 rpm . . . .190 litres/minMaximum temperature rise across the engine . . . . . . . . .N/A CRadiatorRadiator face area. . . . . . . . . . . . . . . . . . . .0.62 m²Number of rows and material . . . . . . . . . . . . . 4 / AluminiumFins per inch and material . . . . . . . . . . . . . . . . .10 FPIPressure cap setting (min). . . . . . . . . . . . . . . . .110 kPaCharge coolerFace area . . . . . . . . . . . . . . . . . . . . . . . . .0.34 m²Number of rows and material . . . . . . . . . . . . . . . . . . . 2 / AluminiumFins per inch and material . . . . . . . . . . . . . . . . . . . . .10 FPIHeight . . . . . . . . . . . . . . . . . . . . . . . . . . 1318 mmWidth . . . . . . . . . . . . . . . . . . . . . . . . 1071 mmWeight of cooling pack (dry) . . . . . . . . . . . . . . . . .130 kgCoolant pumpMethod of drive . . . . . . . . . . . . . . . . . . . .Belt drivenFan type/detailsDiameter . . . . . . . . . . . . . . . . . .813 mm (32 inches)Drive ratio . . . . . . . . . . . . . . . . . . . . . . . . 1:1Material . . . . . . . . . . . . . . . . . . . . . . . . . PlasticNumber of blades . . . . . . . . . . . . . . . . . . . . . . . .9Pusher/puller . . . . . . . . . . . . . . . . . . . . . . PusherCooling fan air flow @ 1500 rpm . . . . . . . . . . . 370 m3/minCooling fan air flow @ 1800 rpm . . . . . . . . . . . . . .482 m³/minDuct AllowanceAmbient cooling clearance (standby power) based on airtemperature at fan of 7 C above the ambient.Maximum additional restriction (duct allowance) to cooling airflowand resultant minimum airflow.Ambient clearanceDuct allowanceMinimum airflow at conditionsFuel systemRecommended fuel to conform to BS 2869 1998 CLASS A2 orBSEN590.Injection system . . . . . . . . . . . . . . . . . . . . . . . . DirectInjector type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulically Actuated Electronically Controlled Unit InjectorGovernor type . . . . . . . . . . . . . . . . . . . . . ElectronicInjector pressure . . . . . . . . . . . . . . . . . . . . . .185 MPaLift pump type . . . . . . . . . . . . . . . . . . . . . . .GearLift pump fuel delivery @ 1500 rpm . . . . . . . . . . . . . . 38 litres/hourLift pump delivery pressure. . . . . . . . . . . . 140-655 kPaMaximum suction head at pump inlet . . . . . . . . . . . . 60.9 kPaMaximum static pressure head. . . . . . . . . . . . . . . . 79 mMaximum fuel inlet temperature. . . . . . . . . . . . . . . . . 4 CFuel filter spacing. . . . . . . . . . . . . . . . . . . . 4 MicronsTolerance on fuel consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5%Fuel consumptionWidth and height of matrixDescriptionFront and rear. . . . . . . . . . . . . . . . . . . . . . . . . . 7 Side tilt. . . . . . . . . . . . . . . . . . . . . . . . . . . 7 @ 1500 rpm@ 1800 rpm53 C54 CNote: figures based on gross engine power and assumed fuelAlldensity of 0.85 r202.273.1203.285.719664.9201.177.175% prime195.248.2197.556.850% prime197.533202.738.9StandbyPrimeInduction systemMaximum air intake restriction of engine:Clean filter. . . . . . . . . . . . . . . . . . . . . . . . . 3.7 kPaDirty filter. . . . . . . . . . . . . . . . . . . . . . . . 6.2 kPaInduction indicator setting . . . . . . . . . . . . . . . . . . 7.5 kPaAir filter type . . . . . . . . . . . . . . . . . . . Dry paper element482 m³/min3 of 12Publication No. TPD1953, December 2014.Copyright 2014 Perkins Engines Company Limited, all rightsreserved. No part of this document may be reproduced in any formor by any means, without prior written permission of Perkins EnginesCompany Limited. The information in this document is substantiallycorrect at the time of printing and may be altered subsequently.1800 rpmg/kWh125 Pa370 m³/min1500 rpmPerkins Engines Company LimitedPeterborough, PE1 5FQ, United KingdomTel: 44 (0)1733 583000Fax: 44 (0)1733 582240www.perkins.com
Lubrication systemCold start recommendations at -20 CTotal lubrication system capacity (dry engine) . . . . . . . . . 41 litresTotal lubrication system capacity (oil change). . . . . . . . . . . 39 litresSump capacity only . . . . . . . . . . . . . . . . . . . . . . .36 litresOil temperature (in sump) maximum. . . . . . . . . . . . . .120 COil temperature (in sump) normal continuous operation . . . . . . . . .115 CLubricating oil pressure at bearings. . . . . . . . . . . . . . . . . 370 kPaMinimum oil pressure . . . . . . . . . . . . . . . . . . . .250 kPaOil relief opens at. . . . . . . . . . . . . . . . . . . . . .662 kPaOil filter screen spacing . . . . . . . . . . . . . . . . 23 MicronsLubricating oil flow . . . . . . . . . . . . . . . . . 200 litres/minOil consumption (highest rating) . . . . . . . . . . . 0.1% of fuelOil SAE . . . . . . . . . . . . . . . . . . . . . . . . . . 0W-30Starter type . . . . . . . . . . . . . . . . . . . 1 x 24 voltsBattery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 voltsMax. breakaway current . . . . . . . . . . . . . . . .998 ampsCranking current . . . . . . . . . . . . . . . . . .243 ampsElectrical systemMaximum back pressure for total system. . . . . . . . . . 10 kPaType (grounding). . . . . . . . . . . . . . . . . Negative groundAlternator type. . . . . . . . . . . . . . . . . . . 20SI 24 voltsAlternator voltage. . . . . . . . . . . . . . . . . . . .24 voltsAlternator output . . . . . . . . . . . . . . . . . . . . 45 ampsStarter type . . . . . . . . . . . . . . . . . . . . . . . . ElectricStarter motor voltage . . . . . . . . . . . . . . . . . .24 voltsStarter motor power . . . . . . . . . . . . . . .5.3 kW or 6 kWNumber of teeth on flywheel . . . . . . . . . . . . . . . . . . . 113Number of teeth on starter pinion . . . . . . . . . . . . . . . . 11Minimum mean cranking speed . . . . . . . . . . . . . . . . 100 rpmStarter solenoid maximum pull-in current @ 20 C . . . . .215 ampsStarter solenoid maximum hold-in current @ 20 C . . . . . . . . .6 ampsStarting aidsGrid heaters . . . . . . . . . . . . . . . . . . . Controlled by ECMBlock temperature. . . . . . . . . . . . . . . . . . . . . . . 45 CExhaust systemEngine mountingsMaximum static bending moment at rear face of block. . . . . .3134 NmMaximum permissible overhung load on flywheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464 kg (at a distance of 65 mm)Load acceptance (cold)1506A-E88TAG5RatingPrime %kWeTransient frequencydeviation, %Frequency recoverytime, seconds50 Hz / 1500 rpm601459.5360 Hz / 1800 rpm601668.72.5Note: The information shown above complies with the requirements of ISO 8528-5 stated G2 operating limits.The figure shown in the table above were obtained under the following test conditions:Minimum engine block temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 CAlternator efficiency @ 1500 rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93.8%Alternator efficiency @ 1800 rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.1%Ambient temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 CGoverning mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IsochronousTypical alternator inertia. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3759 kgm²Under frequency roll off (UFRO) set to @ 1500 rpm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49.5 HzUnder frequency roll off (UFRO) set to @ 1800 rpm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59.5 HzAlternator manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Leroy SomerAlternator model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LSA46.2VL12Note: All tests were conducted using an engine installed and serviced to Perkins Engine Company Limited recommendations.The information given on this technical data sheet is for guidance only. For ratings other than shown, installation guidance, please contact PerkinsEngine Company Limited, United Kingdom.4 of 12Publication No. TPD1953, December 2014.Copyright 2014 Perkins Engines Company Limited, all rightsreserved. No part of this document may be reproduced in any formor by any means, without prior written permission of Perkins EnginesCompany Limited. The information in this document is substantiallycorrect at the time of printing and may be altered subsequently.Perkins Engines Company LimitedPeterborough, PE1 5FQ, United KingdomTel: 44 (0)1733 583000Fax: 44 (0)1733 582240www.perkins.com
Noise DataNoise levelsThe figures for total noise levels are typical for an engine running at the standby continuous baseload power rating in a semi-reverberant environment and measured at a distance of one meter from the periphery of the engine (sound pressure level re: -20x10-6 Pa.Ambient noise level load with open set at 264kWe, standby @ 1500 rpm. All value measured at Sound pressure levels (SPL).PositionNoise, adiator214Frequency,HzNoise, .34K90.58K91.0Octave analysis, 1500 rpm100Noise, cy, Hz5 of 12Publication No. TPD1953, December 2014.Copyright 2014 Perkins Engines Company Limited, all rightsreserved. No part of this document may be reproduced in any formor by any means, without prior written permission of Perkins EnginesCompany Limited. The information in this document is substantiallycorrect at the time of printing and may be altered subsequently.Perkins Engines Company LimitedPeterborough, PE1 5FQ, United KingdomTel: 44 (0)1733 583000Fax: 44 (0)1733 582240www.perkins.com
1506A-E88TAG5 - Front view6 of 12Publication No. TPD1953, December 2014.Copyright 2014 Perkins Engines Company Limited, all rightsreserved. No part of this document may be reproduced in any formor by any means, without prior written permission of Perkins EnginesCompany Limited. The information in this docume
Note: All tests were conducted using an engine installed and serviced to Perkins Engine Company Limited recommendations. The information given on this technical data sheet is for guidance only. For ratings other than shown, insta
Publication No. PN3088B/04/15 Produced in England 2015 Perkins Engines Company Limited 1500 Series 1506A-E88TAG3 ElectropaK 278 kWm standby net power 1800 rpm Building upon Perkins proven reputation within the power . generation industry the Perkins 1500 Series Electropak engines now fit even closer to our customer’s needs.
1.Engine Oil SABA 13 1.Engine Oil 8000 14 1.Engine Oil 6000 15 1.Engine Oil 3000 16 1.Engine Oil Alvand 17 1.Engine Oil Motor Cycle Engine Oil M-150 18 1.Engine Oil M-100 19 1.Engine Oil Gas Engine Oil CNG-BUS 20 1.Engine Oil G.I.C.X.LA 21 1.Engine Oil G.I.C.X. 22 1.Engine Oil Diesel Engine Oil Power 23 1.Engine Oil Top Engine 24
Perkins Engines Company Limite d Peterborough, PE1 5FQ, United Kingdom Tel: 44 (0)1733 583000 Fax: 44 (0)1733 582240 www .perkins.com Copyright 2013 Perkins .
Perkins global product support is designed to enhance the customer experience of owning a Perkins powered machine. We deliver this through the quality of our distribution network, extensive global coverage and a range of Perkins supported OEM partnership options. So whether you are an end-user or an equipment manufacturer our
Perkins Engines (Tianjin) Ltd, Jinwei Road, Beichen District, Tianjin, 300402 China Telephone: (86) (22) 2699 2288 Fax: (86) (22) 2699 3784 France Moteurs Perkins S.A., "Parc des reflets", 165 Avenue du Bois de la Pie, 95700 Roissy Charles de Gaulle, France. Telephone: 0033 (01) 49-90-7171 Fax: 0033 (01) 49-90-7190 Germany Perkins Motoren GmbH .
Perkins School for the Blind Brailler Manual Getting Started The Perkins Brailler is guaranteed for one year against defective materials and workmanship. If there is a problem using the brailler, you can contact Howe Press. Phone or e-mail communications are preferred. HOWE PRESS Perkins School for the Blind 175 North Beacon St.
bm bn LR,.KN PERKINS PERKINS Ltr. A 2,4 A 3.144 3 Zyl. 31 kW (42 PS) MF 133 02-41645-01 69040 08-41650-01
CORE SKILLS FOR PSYCHOTHERAPY. by Ian Rory Owen. 1. It is easy to define what therapy is not. It is not lecturing, nor moralizing, patronizing nor befriending. It is not the use of counselling skills by non-mental health professionals in interviewing or management. Some clinical psychologists describe their work as making "clinical psychology interventions", rather than counselling or .
