EN User Manual Washing Machine - GfK Etilize
ENUser ManualWashing MachineZWF 01483WRZWF 01483WH
ContentsSafety informationSafety instructionsProduct descriptionControl panelProgramme ChartConsumption valuesOptions2345678SettingsBefore first useDaily useHints and tipsCare and cleaningTroubleshootingTechnical Data99912131517Subject to change without notice.Safety informationBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible if anincorrect installation and use causes injuries and damages.Always keep the instructions with the appliance for futurereference.Children and vulnerable people safety This appliance can be used by children aged from 8 years andabove and persons with reduced physical, sensory or mentalcapabilities or lack of experience and knowledge if they havebeen given supervision or instruction concerning use of theappliance in a safe way and understand the hazards involved.Do not let children play with the appliance.Keep all packaging away from children.Keep all detergents away from children.Keep children and pets away from the appliance door when it isopen.Cleaning and user maintenance shall not be made by childrenwithout supervision.General Safety 2Do not change the specification of this appliance.Obey the maximum load volume of 10 kg (refer to the“Programme chart” chapter).The operating water pressure (minimum and maximum) must bebetween 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa).www.zanussi.com
The ventilation openings in the base (if applicable) must not beobstructed by a carpet.The appliance is to be connected to the water mains using thenew supplied hose-sets. Old hose sets must not be reused.If the supply cord is damaged, it must be replaced by themanufacturer, its Authorised Service Centre or similarlyqualified persons in order to avoid a hazard.Before maintenance, deactivate the appliance and disconnectthe mains plug from the mains socket.Do not use water spray and steam to clean the appliance.Clean the appliance with a moist soft cloth. Only use neutraldetergents. Do not use abrasive products, abrasive cleaningpads, solvents or metal objects.Safety instructionsInstallation Remove all the packaging and the transitbolts.Keep the transit bolts. When you move theappliance again you must block the drum.Always be careful when you move theappliance because it is heavy. Always wearsafety gloves.Do not install or use a damaged appliance.Obey the installation instruction suppliedwith the appliance.Do not install or use the appliance where thetemperature is less than 0 C or where it isexposed to the weather.Make sure that the floor where you install theappliance is flat, stable, heat resistant andclean.Do not install the appliance where theappliance door can not be fully opened.Make sure that there is air circulationbetween the appliance and the floor.Adjust the feet to have the necessary spacebetween the appliance and the carpet.Do not install the appliance where theappliance door can not be fully opened. Water connectionElectrical Connection The appliance must be earthed.Always use a correctly installed shockproofsocket.www.zanussi.comMake sure that the electrical information onthe rating plate agrees with the powersupply. If not, contact an electrician.Do not use multi-plug adapters andextension cables.Make sure not to cause damage to themains plug and to the mains cable. Shouldthe mains cable need to be replaced, thismust be carried out by our AuthorisedService Centre.Connect the mains plug to the mains socketonly at the end of the installation. Make surethat there is access to the mains plug afterthe installation.Do not touch the mains cable or the mainsplug with wet hands.Do not pull the mains cable to disconnectthe appliance. Always pull the mains plug.Only for UK and Ireland: The appliance has a13 amp mains plug. If it is necessary tochange the fuse in the mains plug, use a 13amp ASTA (BS 1362) fuse.This appliance complies with the E.E.C.Directives.Make sure not to cause damage to the waterhoses.Before you connect the appliance to newpipes or pipes not used for a long time, letthe water flow until it is clean.3
The first time you use the appliance, makesure that there is no leakage.Use WARNING!Risk of injury, electrical shock, fire,burns or damage to the appliance. Use this appliance in a household only.Obey the safety instructions on thedetergent packaging.Do not put flammable products or items thatare wet with flammable products in, near oron the appliance.Make sure that you remove all metal objectsfrom the laundry.Do not put a container to collect possiblewater leakage under the appliance. Contactthe Authorised Service Centre to ensurewhich accessories can be used.Do not touch the glass of the door while aprogramme operates. The glass can be hot.DisposalWARNING!Risk of injury or suffocation. Disconnect the appliance from the mainssupply.Cut off the mains cable and discard it.Remove the door catch to prevent childrenand pets to get closed in the appliance.Product descriptionAppliance overview121234563WorktopDetergent dispenserControl panelDoor handleRating plateFeet for the appliance level456Installation on suspended flooringSuspended wooden floors are particularlysusceptible to vibration.To help prevent vibration we recommend youplace a waterproof wood panel, at least 15 mmthick under the appliance, secured to at least 24floor beams with screws, the wood panel mustextend beyond the front feet.If possible install the appliance in one of thecorners of the room, where the floor is morestable.www.zanussi.com
Control panelControl panel descriptionCottonsCotton ECOSyntheticsDelicatesWool/HandwashDuvetsMix 20 1400Quick60 1200Intensive40 800Easy IronFinish InRinse Only30 Drain & SpinPOn/Off11 On / Off button90 234567896 Start/Pause touchpad(On/Off)2 Programme selection touchpad3 Temperature touchpad7 Finish in touchpad8 Display(Finish In)9 Door locked indicator4 Spin selection touchpad5 Options selection touchpadDisplayA) The time area:A www.zanussi.comD : the alarm codes : the message of error : the programme is completed.B) The child lock indicator: The indicator comes on when youactivate this device.C) The extra rinse indicator: The indicator comes on when youactivate this option.D) The Finish In touchpad.Finish InB: the programme duration: the "finish in" timeC5
Programme ChartProgrammeTemperaturerangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)30' @ 30 30 C3 kg800 rpmA short cycle for synthetics and delicate items withlight soil level or for items to freshen up.Cottons90 C - Cold10 kg1400 rpmWhite cotton and coloured cotton. Normal soil and lightsoil.Cotton Eco1)60 C - 40 C10 kg1400 rpmWhite cotton and colour-fast cotton. Normal soil. Theenergy consumption decreases and the time of the washingprogramme is extended.Synthetics60 C - Cold4 kg1200 rpmSynthetic items or mixed fabric items. Normal soil.Delicates40 C - Cold4 kg1200 rpmDelicate fabrics as acrylics, viscose, polyester items.Normal soil.Wool/Handwash40 C - Cold2 kg1200 rpmMachine washable wool, hand washable wool andDuvets60 C - Cold3 kg800 rpmSpecial programme for one synthetic blanket, duvet,bedspread and so on.Mix 20 20 C2 kg1200 rpmSpecial programme for cotton, synthetic and mixed fabricswith light soil. Set this programme to decrease the energyconsumption. Make sure that the detergent is for low tem-delicate fabrics with «hand washing» care symbol.2)perature in order to have good washing results3).1) Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, these programmes are respectively the «Standard 60 C cotton programme» and the «Standard 40 C cotton programme». They are the most efficient programmes interms of combined energy and water consumption for washing normally soiled cotton laundry.The water temperature of the washing phase may differ from the temperature declared for the selected programme.2) During this cycle the drum rotates slowly to ensure a gentle washing. It can seem that the drum doesn't rotate or doesn't rotate properly.Consider this as a normal functioning of the appliance.3) No temperature indicator is on .Programme options compatibilityProgrammeQuick1)30' @ 30 EasyIron Cottons Cotton Eco Synthetics 6Intensive RinseOnlyDrain &Spin www.zanussi.com
ProgrammeQuick1)Intensive EasyIronRinseOnlyDrain &Spin Delicates Wool/Handwash DuvetsMix 20 1) When you set this option, we recommend that you decrease the quantity of the laundry. It is possible to keep the full load but the washingresults can be unsatisfactory. Recommended load: cotton: 5 kg, synthetics and delicates: 2,5 kg.Consumption valuesThe data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient temperature.At programme start the display shows the duration programme for the maximum loadcapacity. During the washing phase the programme duration is automatically calculatedand can be greatly reduced if the laundry load is lower than the maximum load capacity(e.g. Cotton 60 C, maximum load capacity 10 kg, the programme duration exceeds 2hours; real load 1 kg, the programme duration don’t reach 1 hour). When the applianceis calculating the real programme duration a dot blinks in the display.ProgrammesLoad(kg)Energyconsumption (kWh)Water consumption(litre)Approximate ttons 60 C102,048717753Cottons 40 C101,048317753Synthetics 40 C40,776112235Delicates 40 C40,56758335Wool/Handwash 30 C20,306357301,215723853Standard cotton programmesStandard 60 C cotton10Standard 60 C cotton50,844420953Standard 40 C cotton50,7242201531) At the end of spin phase.www.zanussi.com7
Off Mode (W)Left On Mode (W)0,480,48The information given in the chart above are in compliance with the EU Commission regulation1015/2010 implementing directive 2009/125/EC.OptionsTemperatureIntensiveWith this option you can change the defaulttemperature.With this option you can wash very soiledlaundry.Indicator cold water.The indicator of the set temperature comes on.SpinWith this option you can change the defaultspin speed.The indicator of the set speed comes on.Additional spin options:The washing cycle lasts longer with this option.The related indicator comes on.Easy IronThe appliance carefully washes and spins thelaundry to prevent the creases.The appliance decreases the spin speed, usesmore water and adapts the programme durationto the type of laundry.No SpinThe related indicator comes on. Rinse Only Set this option to deactivate all spin phases.Only the drain phase is available.The related indicator comes on.Set this option for very delicate fabrics.The rinses phase uses more water for somewashing programmes.Rinse Hold Set this option to prevent the laundrycreases.The related indicator comes on.There is a water in the drum when theprogramme is completed.The drum turns regularly to prevent thelaundry creases.The door stays locked. You must drain thewater to unlock the door.To drain the water refer to ‘At theend of the programme’.QuickWith this option you can perform only a lastrinse of a selected washing programme.If you set also the Extra Rinse function (appliance adds two or more rinses.) theThe related indicator comes on.Drain & SpinWith this option you can perform the spin anddrain cycle.The spin phase is suitable to the washingprogramme you set.If you set also the No Spin ( )option, the appliance only drains.Finish InWith this option you can decrease theprogramme duration.With this option you can set the number ofhours in which you would like your washingprogramme to be completed.Use this option for items with light soil or itemsto refresh.You can set from minimum 3 hours to maximum20 hours.The related indicator comes on.8www.zanussi.com
The display shows the number of hours and theindicator above the buttonis on.Extra RinseUse this option for persons allergic todetergents and in areas where the water is soft.The related indicator comes on.1With this option you can add some rinses to awashing programme.SettingsExtra RinseWith this option you can permanently have anextra rinse when you set a new programme. To activate/deactivate this option touchthe buttonsthe indicatorandat the same time untilcomes on/goes off.Child LockWith this option you can prevent that thechildren play with the control panel. To activate/deactivate this option, touchthe buttonsandat the same time untilThis option stays active even whenyou switch off the appliance.Acoustic signalsThe acoustic signals operate when: The programme is completed. The appliance has a malfunction.To deactivate/activate the acoustic signals,touch the buttonsfor 4 seconds.andat the same timeIf you deactivate the acousticsignals, they continue operate whenthe appliance has a malfunction.the indicatorcomes on/goes off.Activate this option after you touch the button: the buttons are locked (except for thebutton).Before first use1. Put a small quantity of detergent in thecompartment for washing phase.2. Set and start a programme for cotton at thehighest temperature without laundry.This removes all possible dirt from the drum andthe tub.Daily useWARNING!Refer to Safety chapters.Loading the laundryOpen the water tap. Connect the mains plug tothe mains socket.1. Pull the door handle to open the appliancedoor.2. Put the laundry in the drum, one item at atime.3. Shake the items before you put them in theappliance.1 See in "Settings" how to activate this option.www.zanussi.com9
Make sure not to put too much laundry in thedrum. Refer to max. loads indicated in"Programme chart".4. Close the door.Liquid or powder detergentAThe default position ofthe flap is A (powderdetergent).CAUTION!Make surethat nolaundrystaysbetween theseal and thedoor. Thereis a risk ofwaterleakage ordamage tothe laundry.To use liquid detergent:1. Remove the drawer.Push the drawer edge inthe place with the arrow(PUSH) to remove thedrawer easily.Using detergent and additives1. Measure out thedetergent and thefabric conditioner.2. Carefully close thedetergent drawer.When you use the liquid detergent: Do not use gelatinous or thickliquid detergents. Do not put more liquid then 120ml. Do not set the delay start.Detergent compartmentsDetergent compartment for washing phase.If you use liquid detergent, put itimmediately before you start theprogramme.ACompartment for liquid additives(fabric conditioner, starch).CAUTION!Do not exceed theMAX level.Flap for powder or liquid detergent.2. Adjust the flap inposition B.3. Put back the drawer inthe recess.B When the flap is inposition B and you wantto use powder detergent:1. Remove the drawer.2. Adjust the flap inposition A.3. Put back the drawerin the recess.Measure out the detergent and the fabricconditioner.Put the detergent and the fabric conditionerinto the compartments.Carefully close the detergent drawer.Activating the appliancePress and hold for a couple of seconds thebutton to activate or deactivate the appliance.10www.zanussi.com
A tune sounds when the appliance is activated.The appliance performs a start up animation.The animation quickly shows each washingprogramme and the default temperature andspin settings.The display shows the word On.Setting a programme1. Touch the programme buttonprogramme:and set the The indicator of the buttonflashes.The display shows the programmeduration.2. If necessary, change the temperature andthe spin speed or add available options.When you activate an option, the indicatorof the set option comes on.If you set something incorrect, thedisplay shows the message.Starting a programme without theFinish In optionTouch the button .The indicator of the buttonstops toflash and stays on.The programme starts, the door locks,the indicatoris on.The drain pump can operate for a shorttime at the beginning of the washingcycle.After approximately 15 minutes fromthe start of the programme: The appliance adjustsautomatically the programmeduration agree with the laundryload. The display shows the new value.Starting a programme with the Finish Inoption1. Touch the buttonagain and again tochoose the number of hours in which youwant the washing cycle to be finished.The display shows the number of hours you set(e.g.) and the indicator above the buttonis on to show that his option is active. The appliance starts the countdown.When the countdown is completed, theprogramme starts automatically.You can cancel or change the set ofthe Finish In option before you touchthe button. After touching thebuttonyou can only cancel theFinish In option.To cancel the the Finish In option:a. Touch the buttonto set theappliance to pause. The indicator ofbuttonflashes.b. Touch the buttonuntil the indicatorabove this button goes off.Touch the buttonagain to start theprogramme immediately.Interrupting a programme and changingthe optionsYou can change only some options before theyoperate.1. TouchThe indicator of this button flashes.2. Change the options. If you change anyoption the Finish In option (if set) will bedisabled.3. Touchagain.The programme continues.Cancelling a programme1. Press the buttonfor some seconds tocancel the programme and to deactivate theappliance.2. Press the same button again to activate theappliance. Now, you can set a new washingprogramme.The appliance does not drain thewater. The water left in a drum canbe used for the next washing cycle.Opening the doorWhile a programme (or the) operates, theappliance door is locked. The indicatoron.is2. Touch the button: The door is locked.www.zanussi.com11
CAUTION!If the temperature and level of thewater in the drum are too high, youcannot open the door.1. To drain the water.To open the door during the first minutesof the cycle (or when the1. Touch the buttonappliance.goes off.4. Close the door and touch the buttonagain. The programme (or thecontinues.)At the end of the programme The appliance stops automatically.The acoustic signal operates (if it isactivated).comes on. In the display The indicator of the button The door lock indicatorgoes off.You can open the door.Remove the laundry from the appliance.Make sure that the drum is empty.goes off. Press the buttonfor some seconds todeactivate the appliance. Close the water tap. Keep the door and the detergent drawerajar, to prevent the mildew and odours.The washing programme is completed,but there is water in the drum: The drum turns regularly to prevent thecreases in the laundry. The indicatordrain the water. The door lock indicatorTouch the button. The appliancedrains the water and spins with themaximum spin speed for selectedwashing programme. toAlternatively, touch the buttonchange the spin speed and then touchthe button. The appliance drains thewater and spins. If you set , theappliance only drains.2. When the programme is completed and thedoor lock indicatoropen the door.goes off, you can3. Press the buttonfor some seconds todeactivate the appliance.The appliance drains and spinsautomatically after approximately 18hours (except for Wool programme).AUTO-OFF optionThe AUTO-OFF stand-by option automaticallydeactivates the appliance to decrease theenergy consumption. All the indicators and thedisplay go off when : You do not use the appliance for 5 minutesbefore you touch .Press the button to activate the applianceagain.After 5 minutes from the end of the washingprogramme.Press the button to activate the applianceagain.The display shows the end of the last setprogramme.flashes to remind you toindicator of buttonstays locked. operates) :to pause the2. Wait until the indicator3. You can open the door.You must drain the water to open the door.Draining the water:is on. TheTouch the buttoncycle.flashes. The doorif you want to set a newHints and tipsThe laundry load 12Divide the laundry in: white, coloured,synthetics, delicates and wool.Obey the wa
User Manual Washing Machine. Contents Safety information 2 Safety instructions 3 Product description 4 Control panel 5 Programme Chart 6 Consumption values 7 Options 8 Settings 9 Before first use 9 Daily use 9 Hints and tips 12 Care and cleaning 13 Troubleshooting 15 Technical Data 17 Subject to change without notice. Safety information Before the installation and use of the appliance .
The Pedal Operated washing machine is working on simple gear system. The PPWM is used to washing, drying, rinsing. POWM helps to obtain a less effort uniform spinning and washing. By pedaling the bicycle, the pedaling motion rotates the drum, the washing machine will be moving with the crank & rotate the multi utility drum for the washing. .
Your new washing machine You have chosen a Bosch washing machine. Please take a few minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands required by Bosch, every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition.
Your new washing machine You have chosen a Bosch washing machine. Please take a few minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands required by Bosch, every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition.
Your new washing machine You have chosen a Bosch washing machine. Please take a few minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands required by Bosch, every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition.
Your new washing machine You have chosen a Bosch washing machine. Please take a few minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands required by Bosch, every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition.
of clothes and amount of dirtiness of cloths, washing machine will automatically adjust its washing, rinsing, spinning time using Mamdani controller. Consequently, Fuzzy logic control system can be used to calculate the processing time of washing machine for different cloths. 2. Proposed Design for FLC of Smart Washing Machine
With Intego Washing Machine, you can delete one, some, or all of these different types of information from your Mac. You can run Washing Machine manually or automatically; you can choose specific items to clean, or select them by file size or other criteria. Or you could have Washing Machine
The washing machine requires a 240V alternating current (AC) power source. The washing machine will work within a tolerance of 10% of its rated voltage. A dedicated power point should be used where possible to ensure the washing machine receives the correct voltage. Please see overleaf for correct 240V connection. INSTALLATION 5
