3500/61E & 3500/67E Temperature Monitor - Amazon S3
3500/61E & 3500/67E Temperature MonitorBently Nevada* Asset Condition MonitoringDescriptionThe 3500/61E and 3500/67E modules provide six channels and two channel oftemperature monitoring. Both monitors can be ordered to accept ResistanceTemperature Detector (RTD) or Thermocouple (TC) temperature inputs. The TCoption provides 500 Vdc of channel-to-channel isolation.The modules condition these inputs and compare them against userprogrammable alarm setpoints.The user programs the configuration parameters for the monitor using the 3500Rack Configuration Software.The 3500 ENCORE series is available in two configurations:3500 ENCORE Rack Upgrade: In this configuration the 3500/61 and 3500/67E are installed as part ofa 3500 ENCORE upgrade of a 3300 Monitor System where the 3300 chassis and IO remain in place.When used in a rack upgrade the temperature monitors use the pre-existing 3300 series IO Moduleand the relays located on the 3300 series IO.3500 ENCORE System: In this configuration there will be a 3500 ENCORE System Rack with 3500ENCORE Temperature IO modules.Monitors in 3500 ENCORE Systems use a logic programmable Relay Module to drive alarm relays.When used in a 3500 ENCORE Rack Upgrade of a 3300 Monitor System the3500/61E is designed to work with the I/O modules used for the 3300/30 &3300/35 6-Channel Temperature Monitors. The 3500/67E is designed to workwith the I/O modules used for the 3300/36 2-Channel Temperature Monitor.Only the 3500/61E 6-Channel Temperature Monitor is designed for use in a 3500ENCORE System rack.Specifications and Ordering InformationPart Number 287825-01Rev. A (07/13)Page 1 of 7
SpecificationsInputsRTDs100Ω 3-wire & 4-wire platinum RTD (alpha 0.00385):Signal*-200 C to 850 C3500/61E:(-328 F to 1562 F).Accepts from 1 to 6 RTD or TC transducersignals.With external barriers:-50 C to 850 C3500/67E:(-122 F to 1562 F).Accepts from 1 to 2 RTD or TC transducersignals.100Ω 3-wire & 4-wire platinum RTD (alpha 0.00392):InputImpedance* -200 C to 700 CGreater than 3 MΩ for each lead input.(-328 F to 1292 F).PowerConsumptionWith external barriers:3500/61E:-50 C to 700 CTC Option: Nominal consumption of 6.3watts.(-122 F to 1292 F).RTD Option: Nominal consumption of 5.6watts.120Ω 3-wire & 4-wire nickel RTD:-80 C to 260 C(-112 F to 500 F).3500/67E:With external barriers:TC Option: Nominal consumption of 4.8watts.RTD Option: Nominal consumption of 3.2watts.Transducers-50 C to 260 C(-112 F to 500 F).10Ω 3-wire & 4-wire copper RTD:*-100 C to 260 C,TCs(-148 F to 500 F).Type E:With external barriers:-100 C to 1000 C,-50 C to 260 C(-148 F to 1832 F).Type J:-18 C to 760 C,(0 F to 1400 F).Type K:-18 C to 1370 C,(0 F to 2498 F).Type T:-160 C to 400 C,(-122 F to 500 F).Note: Platinum RTD's with 0.00385 alphasare the worldwide industrial standard andare recommended for all applications.* Lower OK limit with external barriers is 50 C.IsolationThe isolated option has 500 Vdc of isolationbetween channels.(-256 F to 752 F).Specifications and Ordering InformationPart Number 287825-01Rev. A (07/13)Page 2 of 7
OutputsFront PanelLEDsRTDs and TCs(except for 10ΩCopper RTDs)OK LEDResolutionIndicates when the 3500/61E or 3500/67E isoperating properly.DANGER LEDIndicates when the 3500/61E or 3500/67Ehas detected that a Danger condition and isdriving the danger alarm.ALERT LEDIndicates when the 3500/61E or 3500/67Ehas detected that an Alert condition and isdriving the alert alarm.Bypass LEDIndicates when the 3500/61E or 3500/67E isin Bypass Mode (alarming has been disabledon one or more channels).RTD CurrentSource Value913 10 µA @ 25 C per transducer (singlesupply for the 4-wire RTD and two suppliesfor the 3-wire).Recorder 4 to 20 mA. Values are proportional tomonitor full-scale. Individual recorder valuesare provided for each channel. Monitoroperation is unaffected by short circuits onrecorder outputs.VoltageCompliance(current output)0 to 12 Vdc range across load. Loadresistance is 0 to 600 Ω.Resolution0.3662 µA per bit 0.15% error at roomtemperature 0.4% error over temperaturerange.Signal ConditioningNote: Specified at 25 C ( 77 F) unless otherwisenoted.Full-scale range for each channel is set inthe field via 3500 Configuration Software.No calibration is required.1 C or 1 FAccuracyWith RTDs (Platinum or Nickel) and a full scalerange limited to 150 C 1 C max over temperatureAll other configurations 2.6 C ( 5.4 F) at 25 2 C 2.8 C ( 5.04 F) max over temperature10Ω CopperRTDsResolution1 C or 1 FAccuracy 3 C at 25 C( 5.4 F at 77 F).Cold JunctionCompensationSensor (used forTCmeasurements)Accuracy 1 C at 25 C( 1.8 F at 77 F).AlarmsAlarm SetpointsThe user can set Alert and Danger setpointsfor the value measured by the monitor usingsoftware configuration. Alarms areadjustable from 0 to 100% of full-scale foreach measured value. The exception iswhen the full-scale range exceeds the rangeof the sensor. In this case, the range of thesensor will limit the setpoint. Accuracy ofalarms are to within 0.13% of the desiredvalue. The Temperature Monitors have bothunder and over alarm setpoints.Specifications and Ordering InformationPart Number 287825-01Rev. A (07/13)Page 3 of 7
Electrical SafetyAlarm TimeDelaysStandards:EN 61010-1: 2010The user can program alarm delays usingsoftware as follows:European Community Directive:2006/95/EC Low VoltageAlertFrom 1 to 60 seconds in 1 second intervals.DangerFrom 1 to 60 seconds in 0.5 second intervalsor can be set to the minimum alarm delay.For further certification and approvals information please visit thefollowing website:www.ge-mcs.com/bentlyHazardous Area ApprovalsNorth American:Number of actualchannel(s)Minimum time delay(mS)1360Groups A, B, C, D.2450T4 @ Ta -20 C to 65 ºC.3540(-4 ºF to 150 ºF).463057206810Class I, Div 2.Note: When installed as a retrofit monitor for a 3300System, hazardous area approval is valid only if theexisting 3300 System has the same type of approval.For further certification and approvals information please visit thefollowing lNote: 225 ms alarm time delays will not be available forall channels. As more channels are used the alarmtime delay increases. The configuration software willindicate the minimum alarm time delay based on thechannel loading.Environmental LimitsOperatingTemperature-20 C to 65 C (-4 F to 150 F)StorageTemperaturePhysicalMonitor Module(Main Board)Dimensions(Height x Widthx Depth)228mm (8.97 in) x 50mm (1.98 in) x289mm (11.39 in)Weight1.23kg (2.70lb)-30 C to 85 C (-22 F to 185 F).Compliance and CertificationsEMCEuropean Community Directives:EMC Directive 2004/108/ECStandards:EN 61326-1:2006Emissions and ImmunityEN 61000-6-2 (2005) C1EN 61000-3-2 (2006) A1, A2EN 61000-3-3 (2008)EN 61000-6-4 (2007) A1Specifications and Ordering InformationPart Number 287825-01Rev. A (07/13)Page 4 of 7
2 Channel Temperature Monitor3500/67E-AXX-BXX-CXXRack Space RequirementsMonitor Module3500/61E1 full-height front slot. In a retrofitrack, the slot to the right of themonitor must be left empty due tothe size of the 3300 I/O moduleOrdering ConsiderationsGeneralThe 3500/61E and 3500/67Erequire the following (or later)software revisions:A: Transducer Type0102B: I/O Module Type00none, uses currentlyinstalled 3300 SIM or SIRMC: Agency Approval Option00None01CSA/NRTL/C (Class 1, Div 2)Notes:1)2)3500/01 Software – Version 4.0System 1*- Version 6.75ENCORE 2- Version 4.6Ordering Information6 Channel Temperature Monitor3500/61E-AXX-BXX-CXXA: Transducer Type0102B: I/O Module Type00Isolated TCRTD/Non-Isolated TCnone, uses currentlyinstalled 3300 SIM or SIRM01Temperature I/OC: Agency Approval Option00None01CSA/NRTL/C (Class 1, Div 2)Note: For installation as a retrofit monitor for a 3300System as in a 3500 ENCORE Rack Upgrade, AgencyApproval Option C01 should be ordered only if theexisting 3300 System has the same type ofapprovals. Installation of a retrofit monitor in asystem without approvals will invalidate theapprovals of the monitor.Isolated TCNon-Isolated RTDThe 3500/67E cannot be used in a 3500 ENCORESystem Rack.For installation as a retrofit monitor for a 3300System as in a 3500 ENCORE Rack Upgrade,Agency Approval Option C01 should be orderedonly if the existing 3300 System has the sametype of approvals. Installation of a retrofitmonitor in a system without approvals willinvalidate the approvals of the 03285694-04287547-01Temperature I/O3500/61E 6 Channel TemperatureMonitor, Isolated TC3500/61E 6 Channel TemperatureMonitor, Non-Isolated RTD3500/67E 2 Channel TemperatureMonitor, Isolated TC3500/67E 2 Channel TemperatureMonitor, Non-Isolated RTD3500/61E & 3500/67E Manual.287199Jumper, 18 Pin, 2 x 9Specifications and Ordering InformationPart Number 287825-01Rev. A (07/13)Page 5 of 7
Graphs and FiguresABCA. Color LCD DisplayB. Display Control SwitchesC. Status LEDsFigure 1: Front view of the Temperature MonitorSpecifications and Ordering InformationPart Number 287825-01Rev. A (07/13)Page 6 of 7
Figure 2: Rear view of the Temperature Monitor I/O module* Denotes a trademark of Bently Nevada, Inc., a wholly owned subsidiary of General Electric Company. 2011 - 2013 Bently Nevada, Inc. All rights reserved.Printed in USA. Uncontrolled when transmitted electronically.1631 Bently Parkway South, Minden, Nevada USA 89423Phone: 775.782.3611Fax: 775.215.2873www.ge-mcs.com/bentlySpecifications and Ordering InformationPart Number 287825-01Rev. A (07/13)Page 7 of 7
3500/61E & 3500/67E Temperature Monitor . Bently Nevada* Asset Condition Monitoring . 3300/35 6. with the I/O modules used for the 3300/36 2. Description . The 3500/61E and 3500/67E modules provide six channels and two channel of temperature monitoring. Both monitors can be ordered to accept Resis tance
Bently Nevada* Asset Condition Monitoring . 3500/61E 1 full-height front slot. The slot to the right of the monitor must be left . 3500/61E & 3500/67E Manual. Specifications and Ordering Information Part Number 287825-01 Rev. NC (04/11) Page 6 of 6 Graphs and Figures
Package (60W), EcoBoost Performance Package (67E), or Need for Green (AJ) 648 O 19" X 9" Luster Nickel-painted Forged Aluminum Wheels Note: Requires EcoBoost Performance Package (67E). Note: Not available with Black Accent Package (52B), Wheel & Stripe Package (60W), Mini Spare Wheel and Tire (66W), or Need for Green (AJ) 64L O O
Maserati- 3500 GT Coupe Touring- Engine 9 Maserati- 3500 GT Coupe Touring- Exhaust 11 Maserati- 3500 GT Coupe Touring- Fuel System 12 Maserati- 3500 GT Coupe Touring- Glass and Seals 13 Maserati- 3500 GT Coupe Touring- Interior 18 Maserati- 3500 GT Coupe Touring- Lights 20 Maserati- 3500 GT Coupe Touring- Luggage Compartment 22
106 AUP2022 3 RoLES AND RESPONSIBILETIES 3.1 ,oENT PURCHASING PARTIES Tttle 16 Chapter 61E ofthe Code of Alabama 1975(16‐ 61E‐2‐12))states that'Educational and eleemosynary institutions governed by boards oftrustees or similar sovernin8 bOdies,state trade schools,state,unior
Digital multimeter, 1 set of test leads, software, RS-232 interface cable, battery, instruction manual ITEM K-PCE-UT 61E digital multimeter calibrationcertificate PCE-UT 61E TRMS DMM with Relative Value IEC61010-1; CAT III 1,000 V; CAT IV 600 V relative value function & Max./Min. function / auto range selection / diode and continuity tests
125 crf125f/fb je03e 3500 3500 3500 3500 3500 trx250tm/te te21e, te48e 3250 3250 3250 3250 150 CRF150F KE02E 4250 4250 4250 4250 400 TRX400X TE23E 3500 CRF150R*/ RB* KE03E 6250 6250 6250 6250 6250 420 TRX420FA/FPA TE37E 3250
Bently Nevada* Asset Condition Monitoring 3500/05 System Rack . Description . The 3500 System rack design holds all 3500 monitor modules and rack power supplies. It allows the various 3500 modules to communicate with one another and the power supplies to distribute power to each mod ule as required. 3500 Racks are available in two sizes: 1.
The series--now titled ASM Handbook--continues to evolve and expand to serve the changing needs of metallurgy professionals throughout the world. One example of this evolution is the release this year of the ASM Handbook on CD-ROM. This year also marks the 50th anniversary of the classic 1948 edition of Metals Handbook--the last "regular" edition to be contained in one volume. The 1948 edition .
