OSP-P Series Pneumatic Rodless Cylinders And Guides
aerospaceclimate controlelectromechanicalfiltrationfluid & gas handlinghydraulicspneumaticsprocess controlsealing & shieldingOSP-P Series PneumaticRodless Cylinders and GuidesCatalog 0951ORIGA
OSP-P Pneumatic Rodless Cylinders and GuidesCatalog 0951Warning, Offer of Sale! WARNINGFAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREINOR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provideproduct and/or system options for further investigation by users h aving technical expertise. It is important that you analyze allaspects of your application including consequences of any failure, and review the information concerning the product or systemin the current product catalog. Due to the variety of operating conditions and applications for these products or systems, theuser, through its own analysis and testing, is solely responsible for making the final selection of the products and systemsand assuring that all performance, safety and warning requirements of the application are met.The products described herein, including without limitation, product features, specifications, designs, availability and pricing,are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.Offer of SaleThe items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this documententitled “Offer of Sale”. Copyright 2008 Parker Hannifin Corporation. All Rights ReservedORIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesCatalog 0951Conversion Table 2D & 3DCAD Drawingscan be downloadedfrom websitewww.parkeroriga.com ELECTRIC ACTUATORAttention!Contact PARKER-ORIGA for sizing softwareand/or technical assistance630-871-8300Application Sheet on Page 104All dimensions are in European-Standard.Please convert all in US-Standard.Conversion amsBy To illimetersNewtonsNewtons-MetersKilogramsParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesCatalog 0951NotesPARKER-ORIGA rodless pneumatic cylindersare the first rodless cylindersthat have been approved for use inpotentially explosive atmospheres inEquipment Group II, Category 2 GDThe Cylinders are to the ATEX Certification94/9/EG (ATEX 95) for PneumaticComponents.For the different classifications and detailsplease see pages 27 and 92.ORIGAfor use in Ex-Areas 120 Cfor Clean Room Applicationscertified toDIN EN ISO 14644-1Low Temperature Versionfor temperatures up to-40 C-40 CStainless steel versionfor special applicationswith special pneumaticcushioning system for cycletime optimization,for Ø 16 to 50 mm– on requestiiORIGAHigh Temperature Versionfor temperatures up to 120 C0.005 m/sSlow Speed Versionv 0.005 – 0.2 m/s 30 m/sHigh Speed Versionvmax. 30 m/sParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesContents – Linear DrivesCatalog 0951Index PageIntroduction – OSP Concept1-3Modular Components OverviewControl Examples for OSP-POSP-P Application examples4-567Rodless Pneumatic CylindersOverviewSeries OSP-P ø10 to 80 mmIntegrated Valves VOEClean Room Cylindersnew ATEX-Versionnew ATEX-Version Plain BearingGuide SLIDELINEnew Bi-parting Version9-1315-2122-2324-26272728-29Linear GuidesOverviewPlain Bearing Guide SLIDELINERoller GuidePOWERSLIDEAluminium-Roller GuidePROLINEAluminium-Roller Guide– PROLINE with ACTIVE-BrakeRecirculating Ball Bearing GuideSTARLINE– Variable Stop VSHeavy Duty Guide HDnew – Variable Stop OverviewPageOSP – Accessories51-52OverviewClevis MountingEnd Cap MountingMid-Section SupportMountings for Linear Drives fittedwith OSP-GuidesInversion MountingAdaptor ProfileT-Slot ProfileConnection ProfileDuplex ConnectionMultiplex ConnectionMagnetic Switches– Standard Versionnew – T-Slot Versionnew – ATEX-VersionWireway Cover– Metric Conversion lacement Measuring SystemsORIGA SENSOFLEXOverviewnew – Series SFI-plus95-9697-99787980818283Service Packs100Ordering Instructions102-103Application Sheet104Safety Guide105-106Offer of Sale107ACTIVE-BrakesACTIVE-Brake53-56– for Standard CylinderPlain Bearing Guide SLIDELINE33-34 – with ACTIVE-BrakeAluminium-Roller Guide39-40PROLINE with ACTIVE-BrakePASSIVE-BrakesMulti-Brake: PASSIVE-Brake withPlain Bearing Guide SLIDELINEMulti-Brake: PASSIVE-Brake withAluminium-Roller Guide PROLINE57-6061-631ORIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
Catalog 0951The System ConceptOSP-P Pneumatic Rodless Cylinders and GuidesOne Concept – Three Drive OptionsBased on the ORIGA rodless cylinder, proven in world wide markets, PARKER-ORIGA now offers the complete solution forlinear drive systems. Designed for absolute reliability, high performance, ease of use and optimized engineering the ORIGASYSTEM PLUS satisfies even the most demanding applications.ORIGA SYSTEM PLUSis a totally modular concept whichoffers the choice of pneumatic orelectric actuation, with guidance andcontrol modules to suit the exactneeds of individual installations.The actuators at the core of thesystem all have a common aluminiumextruded profile, with double dovetailmounting rails on three sides, theseare the principle building blocks of thesystem to which all modular optionsare directly attached.SYSTEM MODULARITY Pneumatic Drive– For all round versatilityand convenience,combining ease of controland broad performancecapability. Ideally suited forpoint-to point operations,reciprocating movementsand simple traverse /transfer applications. Electric Belt Drive– For high speed appli cations,accurate path and position controland longer strokes. Different guidance options providethe necessary level of precision,performance and duty for variousapplications.For additional information on electric linear actuators, please contactfactory for OSP-E literature. Compact solutions, which aresimple to install and can be easilyretrofitted. Valves and control options can bedirectly mounted to the actuatorsystem. Diverse mounting options to providetotal installation flexibility. Electric Screw Drive– For high force capabilityand accurate path andposition control.2ORIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
Catalog 0951The System ConceptOSP-P Pneumatic Rodless Cylinders and GuidesOne Concept – Three Drive Options* For information on Electric Linear Drives, contact factory for literatureDuplex ConnectionBasic Linear DriveStandard Version Series OSP-P Series OSP-P Series OSP-E*Belt driveBelt drive with integrated GuidesVertical belt drive with recirculatingball bearing guideMultiplex Connection Series OSP-P Series OSP-E*Screw drive (Ball Screw, Trapezoidal Screw)Linear Guides– SLIDELINE Series OSP-P Series OSP-E Screw drive*Air Connection on theEnd-face or both at One EndLinear Guides– POWERSLIDE Series OSP-P Series OSP-P Series OSP-E Belt drive* Series OSP-E Screw drive*Clean Room Cylindercertified toDIN EN ISO 146644-1Linear Guides– PROLINE Series OSP-P Series OSP-E.SB Series OSP-P Series OSP-E Belt drive* Series OSP-E Screw drive*Products forATEX Areas Series OSP-PRodless CylindersLinear Guides– STARLINE Series OSP-PProducts forATEX AreasHeavy Duty Linear Guides– HD Series OSP-PRodless Cylinderswith Linear Guide SLIDELINE Series OSP-P Series OSP-E Screw drive*Bi-parting VersionBrakes Series OSP-P Active BrakesIntegrated3/2 Way Valves Passive Brakes Series OSP-PMagnetic Switches Series OSP-P Series OSP-E Belt drive* Series OSP-E Screw drive*Clevis Mounting Series OSP-P Series OSP-E Belt drive* Series OSP-E Screw drive*SENSOFLEX-Measuring SystemEnd Cap Mounting Series SFI-plus Series OSP-P Series OSP-E Belt drive* Series OSP-E Screw drive*Variable Stop VS Series OSP-Pwith Linear Guide STL, HDMid-Section Support Series OSP-P Series OSP-E Belt drive* Series OSP-E Screw drive*Inversion Mounting Series OSP-P Series OSP-E Belt drive* Series OSP-E Screw drive*3ORIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesRodless Cylinders Series OSP-PCatalog 0951Modular Components OverviewLinear DrivesTheoretical force at 6bar [N]Effective force at 6bar [N]Velocity v [m/s]Magnetic piston (three sides)Lubrication - PrelubricatedMultiple air ports ( 4 x 90 )Both Air Connections at End-faceAir Connection on the End-faceCushioningCushioning length[mm]Stroke length [mm] Pressure range pmax [bar]Temperature range [ C] Viton / chemical resistanceStainless steel partsClevis MountingSlow speed lubricationDuplex Connection / Multiplex ConnectionTandem pistonBasic CylinderF [N]Mx [Nm]My [ Nm]Mz [Nm]SlidelineF [N]Mx [Nm]My [Nm]Mz [Nm]ProlineF [N]Mx [Nm]My [Nm]Mz [Nm]PowerslideF [N]Mx [Nm]My [Nm]Mz [Nm]StarlineF [N]Mx [Nm]My [Nm]Mz [Nm]– variable StopOSP-P10 OSP-P16471203278 0.005 0.005 2,50111 - 60001 - 60008.08.0-10 – 80 -10 – 80 on request OSP-P25295250 0.005 171 - 60008.0-10 – 80 OSP-P32483420 0.005 201 - 60008.0-10 – 80 OSP-P40754640 0.005 271 - 60008.0-10 – 80 OSP-P5011781000 0.005 301 - 60008.0-10 – 80 OSP-P6318701550 0.005 321 - 60008.0-10 – 80 on request 15151650122002424002436048 25001202602602500120260260 49 1400144545300065 - 90175 - 250175 - 2503000 - 400090 - 140250 - 350250 - 350 1000153030 4000-7500150400400 4000-7500210580580 1400 - 3000 1400 - 300014 - 6520 - 6563 - 17570 - 17563 - 17570 - 175310050110110 4ORIGAOSP-P8030102600 0.005 391 - 60008.0-10 – 80 on request 310062160160 Parker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesRodless Cylinders Series OSP-PCatalog 0951Modular Components OverviewLinear DrivesOSP-P10OSP-P16HD Heavy Duty GuideF [N] Mx [Nm] My [Nm] Mz [Nm] – variable Stop Active BrakeBraking force at 6 bar (brake surface dry) [N] Slideline SL / Proline PL with BrakesActive BrakeSL Braking force at 6 bar (brake surface dry) [N] PL Braking force at 6 bar (brake surface dry) [N] Passive Brake MultibrakeSL Braking force at 6 bar (brake surface dry) [N] PL Braking force at 6 bar (brake surface dry) [N] Magnetic SwitchesStandard Version T-Nut Version ATEX Version for EX- AreasDisplacement measuring systemsSFI-plus incrementalIntegrated valves 3/2 WV NO VOEMountingsEnd Cap Mounting / Mid-Section SupportInversion MountingShock absorber for intermediate positioningAdaptor Profile / T-Nut ProfileSpecial CylindersSpecial Pneumatical Cushioning SystemClean Room Cylinders to DIN EN ISO 14644-1ATEX Version for EX-AreasBi-parting VersionHigh-Speed up to 30 60320320 6000285475475 1500080011001100 18000110014001400 3505909001400217040003255458351200on request on request on request on request 4703157904901200715187011002900–2900– on request on request on request on request on request on request on request on request on request on request on request on request on request on request Standard version longer strokes on request other temperature ranges on request Option not applicable5ORIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesControl Examples for OSP-PCatalog 0951ExamplesCircuit diagram for endof stroke application.Intermediate positioning isalso possible.Circuit diagram for endof stroke application.Intermediate positioning isalso possible.The cylinder is controlledby two 3/2-way valves(normally open). Thespeed can be adjustedindependently for bothdirections.The cylinder is controlledby a 5/3-way valve (middleposition pressurized).The speed can be adjustedindependently for bothdirections.Fast/Slow speed cycle control with pneumatic brake foraccurate positioning at highvelocities.Additional 3/2-way valveswith adjustable throttlevalves at the exhaust of thestandard directional controlvalves for two displacementspeeds in each direction ofthe piston’s travel.The valve controlling thebrake is activated afterthe slow speed cycle isactvatedThe optional integratedVOE Valves offer optimalcontrol, and allow accurateThe combination of anOSP-cylinder with the passiveMULTIBRAKE as shown here,allows accurate positioningand safety in case of loss ofpneumatic air pressure.6ORIGApositioning of intermediatepositions and the lowestpossible speeds.Parker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesOSP-P Application ExamplesCatalog 0951ExamplesORIGA SYSTEM PLUS – rodless linear drives offer maximum flexibility for any application.The high load capacity ofthe piston can cope withhigh bending momentswithout additional he mechanical designof the OSP-P allowssynchronized movementof two cylinders.Integrated guides offeroptimal guidance forapplications requiring highperformance, easy assembly and maintenance freeoperation.Optimal system performance by combiningmulti-axis cylinder combinations.When using externalguides, the clevis mountingis used to compensate fordeviations in parallelism.For further information and assembly instructions, please contact your localPARKER-ORIGA dealer.7ORIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesCatalog 0951Notes8ORIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
ORIGARodless Pneumatic CylindersSeries OSP-PContentsDescriptionPageStandard CylindersOverview9-13Technical Data15-17Dimensions18-23Clean Room CylindersTechnical Data24-25Dimensions26Cylinders ATEX-VersionTechnical Data27Dimensions18-23Cylinders for synchronized bi-parting movementsTechnical Data28Dimensions299ORIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesRodless Pneumatic CylinderCatalog 0951System Concept & Componentsoriga system plus– innovation from A PROVEN designA completely new generation of linear drives which can be simply and neatlyintegrated into any machine layout.A NEW MODULAR LINEAR DRIVESYSTEMMOUNTING RAILS ON 3 SIDESWith this second generation lineardrive PARKER-ORIGA offersdesign engineers complete flexibility.The well known ORIGA cylinder hasbeen further developed into a combined linear actuator, guidance andcontrol package. It forms the basis forthe new, versatile ORIGA SYSTEMPLUS linear drive system.Mounting rails on 3 sides of thecylinder enable modular componentssuch as linear guides, brakes, valves,magnetic switches etc. to be fitted tothe cylinder itself. This solves manyinstallation problems, especially wherespace is limited.All additional functions are designedinto modular system componentswhich replace the previous series ofcylinders.Combined clampingfor inner andouter sealing bandwith dust cover.The modular system concept formsan ideal basis for additional customerspecific functions.Corrosion resistant steelouter sealing band androbust wiper system on thecarrier for use in aggressiveenvironments.Magnetic piston as standard- for contactless positionsensing on three sides of thecylinder.Proven corrosion resistant steelinner sealing band for optimumsealing and extremely low friction.Stainless steelscrews optional.Low friction piston seals foroptimized running characteristicsEnd cap can be rotated to any oneof the four positions (before or afterdelivery) so that the air connectioncan be in any desired position.Optimized cylinder profilefor maximum stiffness andminimum weight. Integralair passages enable both airconnections to be positionedat one end, if desired.10ORIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesRodless Pneumatic CylinderCatalog 0951System Concept & ComponentsClean Room Versioncertified to DIN EN ISO 14644-1SLIDELINECombination withlinear guidesprovides forheavier loads.POWERSLIDERoller bearingprecision guidancefor smooth traveland high dynamicor static loads.Rodless Cylinderfor synchronized bi-parting movementsProlineThe compactaluminium rollerguide for high loadsand velocities.New low profilepiston/carrier design.STARLINERecirculating ballbearing guide forvery high loadsand precisionHeavy Dutyguide HDfor heavy dutyapplications.Adjustable end cushioningat both ends are standard.Integral dovetail rails on three sidesprovide many adaptation possibilities(linear guides, magnetic switches,etc.).Modular system componentsare simply clamped on.INTEGRATEDVOE VALVESThe completecompact solutionfor optimal cylindercontrol.Passivepneu matic brakereacts auto mati cally to pressurefailure.Active pneumaticbrake for secure,positive stoppingat any position.SENSOFLEXSFI-plusincrementalmeasuring systemwith 0,1 (1,0) mmresolution11ORIGAVARIABLE STOPVSThe variable stopprovides simplestroke limitation.Parker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesRodless Pneumatic CylinderCatalog 0951AccessoriesOPTIONS AND ACCESSORIESFOR SYSTEM VERSATILITYSeries OSP-PSTANDARDVersionsOSP-P10 to P80STAINLESS VERSIONFor use in constantly dampor wet environments. Allscrews are A2 qualitystainless steelTo solve special installation problems.SINGLE END PORTINGPage 21For simplified tubing connectionsand space saving.SLOW SPEED OPTIONSPages 15-18Standard carrier with integralguidance. End cap can be rotated4 x 90 to position air connection onany side.Magnetic piston as standard.Dovetail profile for mounting ofaccessories and the cylinder itself.Specially formulated grease 0.005 m/slubrication facilitates slow,smooth and uniform pistontravel in the speed rangefrom 0.005 to 0.2 m/s.Minimum achievable speeds aredependent on several factors. Pleaseconsult our technical department.Slow speed lubrication in combinationwith Viton on demand.Oil free operation preferred.INTEGRATED VOE VALVESPage 22The complete compact solutionfor optimal cylinder control.viton VERSIONFor use in an environmentwith high temperatures orin chemically aggressiveareas.All seals are made of Viton .Sealing bands: Stainless steelBASIC CYLINDEROPTIONSClean Room CylindersPage 24For use in clean room applications, certified with theIPA-Certificate(to DIN EN ISO 14644-1).The special design of the linear driveenables all emissions to be led away.CORROSION RESISTANCE COATINGDUPLEX ConnectionPage 82The duplex connection combines twoOSP-P cylinders of the same size intoa compact unit with high performance.FDA Approved Xylan CoatingGood for food applications, causticwashdown, salt spray, dionized waterand chemical resistance.end-Face AIR CONNECTIONPage 20multiplex connectionPage 83ATEX-VersionPage 27The multiplex connection combinestwo or more OSP-P cylinders of thesame size into one unit.The orientation of the carriers can befreely selected.For use in Ex-Areas12ORIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesRodless Pneumatic CylinderCatalog 0951AccessoriesACCESSORIESMID-SECTION SUPPORTMagnetic switchesTYPE RS, ES, RST, ESTPage 70Pages 84-94For electrical sensing of end andintermediate piston positions, also inEX-Areas.For supporting long cylinders ormounting the cylinder by its dovetailrails.INVERSION mountingMOUNTINGSPage 78clevis MOUNTINGThe inversion mounting transfers thedriving force to the opposite side, e. g.for dirty environments.Page 67-68Carrier with tolerance and parallelismcompensation for driving loadssupported by external linear guides.END CAP MOUNTINGPage 69For end-mounting of the cylinder.13ORIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesRodless Pneumatic CylinderCatalog 0951Notes14ORIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesRodless Pneumatic CylinderCatalog 0951Technical DataTypeRodless ouble-acting, with cushioning,position sensing capabilityø 10-80 mmMountingSee drawingsAir ConnectionThreaded CharacteristicsPressures quoted as gauge l FeaturesAmbienttemperature rangeTminTmaxWeight (mass) C C-10 80Other temperature rangeson requestkgSee table belowInstallationIn any positionMediumFiltered, unlubricated compressed air(other media on request)LubricationPermanent grease lubrication(additional oil mist lubricationnot required)Option: special slow speed greaseAnodized aluminiumCarrier (piston)Anodized aluminiumEnd capsAluminium, lacquered / Plastic (P10)Sealing bandsCorrosion resistant steelSealsNBR (Option: Viton )ScrewsGalvanized steelOption: stainless steelMaterialCylinder ProfileDust covers,wipersMax. operating pressurepmaxPlasticbar8The right to introduce technicalmodifications is reservedWeight (mass) kgWeight (Mass) kgCylinder series(Basic cylinder)At 0 mm strokeper 100 mm 6OSP-P636.410.925OSP-P8012.461.262 Series OSP-P.Standard Versions: double-acting with adjustableend cushioning with magnetic piston for positionsensingSpecial Versions: with special pneumaticalcushioning system (on request) Clean room cylinders(see page 24) ATEX-Version(see page 27) Stainless steel screws Slow speed lubrication Viton seals Both air connections on one end Air connection on the end-face Integrated ValvesSize ComparisonP10 P16 P25P32P40P50P63P8015ORIGA End cap can be rotated4 x 90 to position airconnection as desired Free choice of strokelength up to 6000 mm(longer strokes on request)Parker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesRodless Pneumatic CylinderCatalog 0951Technical DataLoads, Forcesand Moments Choice of cylinder is decided by: permissible loads, forces andmoments performance of the pneumatic endcushions.The main factors here arethe mass to be cushioned and thepiston speed at start of cushioning(unless external cushioning is used,e. g. hydraulic shock absorbers).The adjacent table shows themaximum values for light, shock-freeoperation, which must not beexceeded even in dynamic operation.Load and moment data are basedon speeds v 0.5 m/s.When working out the action forcerequired, it is essential to take intoaccount the friction forces generatedby the specific application or load. M F ·lBending moments arecalculated from thecenter of the linearactuator Cylinder- TheoreticalSeriesAction Force[mm Ø]at 6 bar [N]effektiveAction Force FAat 6 bar [N]max. MomentsMxMyMz[Nm] [Nm] [Nm]max. LoadF[N]CushionLength[mm]OSP-P10 47320.2 10.3 202.5 *OSP-P16 120780.45 40.5 12011OSP-P25 2952501.5 15330017OSP-P32 483420330545020OSP-P40 754640660875027OSP-P50 1178100010115 15120030OSP-P63 1870155012200 24165032OSP-P80 3016260024360 48240039* A rubber element (non-adjustable) is used for end cushioning.To deform the rubber element enough to reach the absolute end position wouldrequire a Dp of 4 bar!Cushioning Diagram Max. permissible piston speedat start of cushioningWork out your expected moving massand read off the maximum permissiblespeed at start of cushioning.Alternatively, take your desired speedand expected mass and find thecylinder size required.Please note that piston speed atstart of cushioning is typically ca. 50% higher than the average speed,and that it is this higher speed whichdetermines the choice of cylinder. Ifthese maximum permissible values areexceeded, additional shock absorbersmust be used. Mass to be cushioned ** For cylinders with linear guides or brakes, please be sure to takethe mass of the carriage or the brake housing into account.If the permitted limit values are exceeded, either additional shockabsorbers should be fitted in the area of the center of gravity or you canconsult us about our special cushioning system– we shall be happy to advise you on your specific application.16ORIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesRodless Pneumatic CylinderCatalog 0951Technical DataPermissible Support Spacings: OSP - P10 - P32 Load FMid-Section SupportsTo avoid excessive bending andoscillation of the cylinder, mid-sectionsupports are required dependenton specified stroke lengths andapplied loads. The diagrams show themaximum possible support spacingsdepending on the load.Bending up to max. 0.5 mm is permissible between supports. The midsection supports are clamped on tothe dovetail profile of the cylinder tube.They are also able to take the axialforces. Distance kPermissible Support Spacings: OSP - P40 - P80 Load F Distance k17ORIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesRodless Pneumatic CylinderCatalog 0951DimensionsCylinderStroke and Dead Length ADimensions of Basic Cylinder OSP-P10 Free choice of stroke length up to6000 mm in 1 mm steps.Stroke Longer strokes on request.Stroke 2 x ATandem CylinderStrokeTwo pistons are fitted: dimension "Z"is optional. (Please note minimumdistance "Zmin"). Free choice of stroke length up to6000 mm in 1 mm steps.Stroke 2 x A Z Longer strokes on request. Stroke length to order isstroke dimension "Z"End Cap/Air ConnectionSeries OSP -P10Please note:To avoid multiple actuation ofmagnetic switches, the secondpiston is not equipped withmagnets.CarrierSeries OSP-P10Dimension Table (mm)Cylinder A B C D E G HIJK L M N P RS WX YSeriesZCF EM EN FB FH ZZminOSP-P106444.5 1219M512M3 56608.5 2222.5 17.5 10.5 3.418ORIGA1622.5 31M332 9.5 21717 6Parker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.com
OSP-P Pneumatic Rodless Cylinders and GuidesRodless Pneumatic CylinderCatalog 0951DimensionsCylinderStroke and Dead Length ADimensions of Basic Cylinder OSP - P16-P80 Free choice of stroke length up to6000 mm in 1 mm steps.Stroke Longer strokes on request.Stroke 2 x AStroke Tandem CylinderTwo pistons are fitted: dimension "Z"is optional. (Please note minimumdistance "Zmin").Stroke 2 x A Z Free choice of stroke length up to6000 mm in 1 mm steps.End Cap/Air Connection can be rotated 4 x 90 Series OSP-P16 to P32 Longer strokes on request. Stroke length to order isstroke dimension "Z"Air connection DPlease note:To avoid multiple actuation ofmagnetic switches, the secondpiston is not equipped withmagnets.Cushion adjustment screwCarrierSeries OSP-P16 to P80End Cap/Air Connection can be rotated 4 x 90 Series OSP-P40 to P80 Air connection D Cushion adjustment screw Dimension Table (mm)Cylinder A B CD E GH IJ K M O S V XYSeriesOSP-P16 65 14 30 M5 18 M3 9 5.5 69 15 23 33.2 22 16.5 36 M4OSP-P25100 22 41 G1/8 27 M5 15 9 117 21.5 31 47 33 25 65 M5OSP-P32125 25.5 52 G1/4 36 M6 15 11.5 152 28.5 38 59 36 27 90 M6OSP-P40150 28 69 G1/4 54 M6 15 12 152 34 44 72 36 27 90 M6OSP-P50175 33 87 G1/4 70 M6 15 14.5 200 43 49 86 36 27 110 M6OSP-P63 215 38 106 G3/8 78 M8 21 14.5 256 54 63 107 50 34 140 M8OSP-P80260 47 132 G1/2 96 M10 25 22 348 67 80 133 52 36 190 M1019ORIGAZBW BX BY CF EN FB FHmin81 10.8 1.8 28.4 38 330 27.2128 17.5 2.2 40 52.5 3.6 40 39.5170 20.5 2.5 44 66.5 5.5 52 51.7212 21 3 54 78.5 7.5 62 63251 27 – 59 92.5 11 76 77313 30 – 64 117 12 96 96384 37.5 – 73 147 16.5 122 122Parker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.parkeroriga.comZZ781010101620
OSP-P Pneumatic Rodless Cylinders and GuidesRodless Pneumatic CylinderCatalog 0951Dimensions Air connection D In some situations it is necessary ordesirable to fit a special end cap withthe air connection on the end-faceinstead of the standard end cap withthe air connection on the side. Thespecial end cap can also be rotated4 x 90 to locate the cushionadjustment screw as desired.Supplied in pairs.Series OSP-P16 to P32 Air Connection on theEnd-Face #5 Cushion adjustment screw Series OSP-P40 to P80124Air connection DCushion adjustment screw35Note: Position #2 is thestandard location.Dimension Table (mm)CylinderSeriesBCD RIGAParker Hannifin CorporationParker-OrigaGlendale Heights, Illinoiswww.p
Parker Hannifin Corporation Parker-Origa Glendale Heights, Illinois www.parkeroriga.com ORIGA ii Catalog 0951 OSP-P Pneumatic Rodless Cylinders and Guides Notes PARKER-ORIGA rodless pneumatic cylinders are the first rodless cylinders that have been approved for use in potentially e
Parker Hannifin Corporation Parker-Origa Glendale Heights, Illinois www.parkeroriga.com ORIGA ii Catalog 0951 OSP-P Pneumatic Rodless Cylinders and Guides Notes PARKER-ORIGA rodless pneumatic cylinders are the first rodless cylinders that have been approved for use in potentially e
filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding ORIGA OSP-P Pneumatic Rodless Cylinders and Linear Guides Catalog 0980 www.comoso.com. Parker Hannifin Corporation . Pa
This combination of basic pneumatic knowledge and practice with hands-on equipment helps learners build the pneumatic skills they will need to succeed in the workplace. 1. Pneumatic Power Systems 2. Basic Pneumatic Circuits 3. Principles of Pneumatic Pressure and Flow 4. Pneumatic Speed Control Circuits 5. Pneumatic DCV Applications Air Logic 7.
INTERNAL PLAIN BEARING GUIDE AND PISTON ROD Catalog 0950-2 Options & Accessories OSP-E Series Electric Linear Drives and Guides Ball Screw Drive & Piston Rod. 73 ORIGA Parker Hannifin Corporation . Series KB h7 KC KL KO KPP9 KR Opt.3 Opt.4 OSP-E25SBR 6 6.8 17 24 2 2 12 OSP-E32SBR 10 11.2 31 41 5 3 16 OSP-E50SBR 15 17 43 58 6 5 28
R&S OSP‑B157W8 R&S OSP‑B157W8PLUS R&S OSP‑B157WX Preface User Manual 1178.5795.02 03 6 Frequency ranges Basically, the modules are designed to cover the 2.4 GHz and 5 GHz frequency bands. However, some of the above mentioned regulatory ETSI and FCC tests include mea-
Mega-Bergerac Aspen OCB-37-0098 Mega-Bergerac Rio OCB-37-1152 Mega-Bergerac Toscana OSP-37-5020 Mega-Bergerac Victorian OSP-37-5021 Urbana Stone Aspen MLO-37-1113 Urbana Stone Rio OCB-37-1153 Urbana Stone Toscana OSP-37-0734 Urbana Stone Victorian OSP-37-0735
controls the cylinder. The speed can be controlled separately for both direc-tions. Examples CONTROL EXAMPLES FOR OSP-P If a 5/3-way valve (with pres-surized middle position) is used to control the cylinder, it is possible to stop at inter-mediate positions. The optional integrated VOE Valves
224 Communicating in the 21st Century Essay writing ‘The essay is a form of refined torture. Discuss.’ You almost certainly will never encounter such an essay topic, but you might think it.
