NoAm Version Flanges
Call us today 201.444.7800 or visit www.stauff.comSTAUFF CorperationCLAMPSTESTHomeFILTRATIONDIAGTRONICS ACCESSORIESVALVESFLANGESACCUMULATORSFlangesSAE FlangesGear Pump FlangeThe STAUFF range of flanges gives you extensive productdiversity, whether it is the DIN ISO 6162-1/2 range or SAEJ518compliant SAE flanges, as well as the range of gear pumpflanges.STAUFF SAE flanges are made of high-quality materials. Theexact steel quality and the surface treatment are adaptedindividually to the needs and requirements of the flange.Naturally, all our coated parts have CrVI-free surfaces.The standard pressure series of STAUFF SAE flanges containscomponents for a flange connection with maximum operatingpressures from 35 . 350 bar / 507 . 5076 PSI. They areavailable in all nominal sizes between DN13 (1/2”)and DN127 (5”).Stainless steel (1.4404/1.4571), alternate gasket materialsand higher bolt strengths are also available on request.The STAUFF range of gear pump flanges is used as asupplement for gear-type rotary pumps, motors, and othersmaller size pumps. We offer you a wide range of differentvariations, divided into various sizes and designs, like, forexample, a straight or 90 design with 3-hole or 4-holefastening. It goes without saying that we manufacture ourpump flanges from high-quality materials, and naturally theyalso have CrVI-free surfaces.STAUFF covers maximum operating pressures of up to 420 bar/ 6092 PSI and nominal sizes between DN13 (1/2”) and DN51(2”) with this high-pressure series.STAUFF SAE flanges are available as individual flanges withoutany accessories, or as complete components with gaskets andsuitable sets of bolts. A large number of different componentsare available at all times.Please do not hesitate to contact STAUFF.s t auf f .c o m
Call us today 201.444.7800 or visit www.stauff.comSTAUFF CorperationCLAMPSTESTHomeSAE FlangesFILTRATIONDIAGTRONICS ACCESSORIESVALVESFLANGESACCUMULATORSSAE FlangesSAE Split Flange Halves DBSAE Flange Clamp BMGear Pump FlangeSAE Split Flange Halves (Flat Style) DB-FLSAE Flange Clamp (Flat Style) BM-FLSAE Flange Clamp with Metric Tapped Holes BM-GSAE Butt Weld Flange Adapter and Companion Flange Adapter CAG/CSG-STSAE Socket Weld Adapter and Companion Flange Adapter CAG/CSG-ESSAE Single Part Screw-In FlangesNPT Threaded Flange and Companion Flange BFX-N / BAS-NUN Threaded Flange BFX-U / BAS-UBSPP Threaded Flange and Companion Flange BFX-G / BAS-GMetric Threaded Flange BFX-MSAE Single Part Butt Weld Flanges / Companion FlangesHigh Pressure Pipe Flanges (Schedule 80/160) BFX-ST / BAS-STLow Pressure Pipe Flanges (Schedule 40) BFX-STRE / BAS-STREMetric Tube Flanges BFX-SRE / BAS-SRESAE Single Part Socket Weld Flanges / Companion FlangesStandard BFX-ES / BAS-ESFlat Style BFX-FLNA-ES / BAS-FLNA-ESE Single-Part Fitting Flange with JIC 37 Cone Connector BFX-JSAE 90 Single-Part Screw-in FlangesNPT Threaded Flange BFX90-NBSPP Threaded Flange BFX90-GPage 1 Page 2s t auf f .c o m
Call us today 201.444.7800 or visit www.stauff.comSTAUFF CorperationCLAMPSTESTHomeSAE FlangesGear Pump FlangeFILTRATIONDIAGTRONICS ACCESSORIESVALVESFLANGESACCUMULATORSSAE FlangesSAE 90 Single-Part Butt Weld FlangesSchedule 80 BFX90-STMetric Tube Flanges BFX90-SRESAE 90 Single-Part Socket Weld FlangesBFX90-ESOther SAE FlangesSAE Blanking Flange and Companion Flange BFX-CP / BAS-CPSAE Sandwich Plate (e.g. for Test Point) - Female BSP Port SPL-G1/4-LSAE Blindplug SAE Blindplug (High Version) CAG-BP / CAG-BPHSAE Sandwich Plate SPLSAE Cover Plate CPLSAE Flanges Also availablePage 1 Page 2s t auf f .c o m
GFlangesThe standard pressure series of STAUFF SAE flanges containscomponents for a flange connection with maximum operatingpressures from 35 . 350 bar / 507 . 5076 PSI.They are available in all nominal sizes between DN13 (1/2")and DN127 (5").STAUFF covers maximum operating pressures of up to420 bar / 6092 PSI and nominal sizes between DN13 (1/2")and DN51 (2") with this high-pressure series.STAUFF SAE flanges are available as individual flangeswithout any accessories, or as complete components withgaskets and suitable sets of bolts. A large number of differentcomponents are available at all times.STAUFF SAE flanges are made of high-quality materials.The exact steel quality and the surface treatment are adaptedindividually to the needs and requirements of the flange.Naturally, all our coated parts have CrVI-free surfaces.Stainless steel (1.4404/1.4571), alternate gasket materialsand higher bolt strengths are also available on request.IndexG2SAE FlangesG4Gear Pump FlangesG51The STAUFF range of gear pump flanges is used as asupplement for gear-type rotary pumps, motors, and othersmaller size pumps. We offer you a wide range of differentvariations, divided into various sizes and designs, like, forexample, a straight or 90 design with 3-hole or 4-holefastening. It goes without saying that we manufacture ourpump flanges from high-quality materials, and naturally theyalso have CrVI-free surfaces.Please do not hesitate to contact STAUFF.www.stauff.comG FlangesThe STAUFF range of flanges gives you extensive productdiversity, whether it is the DIN ISO 6162-1/2 range orSAEJ518 compliant SAE flanges, as well as the range ofgear pump flanges.
IndexSAE FlangesG2SAE Split Flange HalvesDBG4SAE Single-Part Screw-inNPT Threaded Flangeand Companion FlangeBFX-N / BAS-NG14SAE Flange ClampBMG6SAE Single-Part Screw-inUN Threaded FlangeBFX-U / BAS-UG18SAE Split Flange Halves(Flat Style)DB-FLG8SAE Single-Part Screw-inBSPP Threaded Flangeand Companion FlangeBFX-G / BAS-GG22SAE Flange Clamp(Flat Style)BM-FLG9SAE Single-Part Screw-in MetricThreaded FlangeBFX-MG24SAE Flange Clampwith Metric Tapped HolesBM-GG10SAE Single-Part Butt Weld Flangefor High Pressure Pipesand Companion Flange (Schedule80/160)BFX-ST / BAS-STG26SAE Butt Weld Flange Adapterand Companion Flange AdapterCAG/CSG-STG11SAE Single-Part Butt Weld Flangefor Low Pressure Pipesand Companion Flange (Schedule 40)BFX-STRE / BAS-STREG28SAE Socket Weld Adapterand Companion Flange AdapterCAG/CSG-ESG12SAE Single-Part Butt Weld Flangefor Metric Tubesand Companion FlangeBFX-SRE / BAS-SREG30SAE Single-Part Socket Weld Flangeand Companion FlangeBFX-ES / BAS-ESG32SAE Single-Part Socket Weld Flangeand Companion Flange (Flat Style)BFX-FLNA-ESBAS-FLNA-ESG34SAE Single-Part Fitting Flangewith JIC 37 Cone ConnectorBFX-JG39SAE 90 Single-Part Screw-in NPTThreaded FlangeBFX90-NG39SAE 90 Single-Part Screw-in BSPPThreaded FlangeBFX90-GG40SAE 90 Single-Part Butt Weld Flange(Schedule 80)BFX90-STG41SAE 90 Single-Part Butt Weld Flangefor Metric TubesBFX90-SREG42SAE 90 Single-Part Socket WeldFlangeBFX90-ESG43www.stauff.com
IndexPressure InformationSAE Blanking Flangeand Companion FlangeBFX-CP / BAS-CPG44SAE Sandwich Plate(e.g. for Test Point) - Female BSP PortSPL-G1/4-LG46SAE BlindplugSAE Blindplug (High Version)CAG-BP / CAG-BPHG47SAE Sandwich PlateSPLG48The pressure information (maximum working pressures) stated in this catalogue onlyapply to the single components mentioned. It does not apply to the used bolts, fittings,welded or screwed connections. Please take notice of the information and specificationof the manufaturers for all further components used and also the legal regulations.Please note: The pressure information of the components of flange combinations(consisiting of the flange itself and a tube end) may vary from each other.Please consider the lowest pressure as the maximum working pressure of thiscombination.Temperature InformationAll information apply to a temperature range ofSAE Cover PlateSAE FlangesAlso available .CPLG49-20 C . 90 C / -4 F . 194 FOutside of this temperature range, the material-specific properties could be reduced.This applies to the selection of the sealing materials in particular.G50Gear Pump FlangesGear Pump FlangesAlso available .G51AccessoriesG52Technical AppendixG52G FlangesAccessories / Technical Appendixwww.stauff.comG3
SAE FlangesDimensions / Order CodesSAE Split Flange HalvesDBOrder Codes ExamplesSplit Flange SetPair of SAE Split Flange HalvesDB-.Split Flange HalfIndividual half onlyDB-.-HALFSplit Flange KitsIncl. UNC hexagon head boltsDB-.-AS-U-B#K(Gr10), spring rings, O-ring madeof NBR (Buna-N )(packed in kits)Incl. Metric hexagon headDB-.-AS-M-B#Kbolts 8.8, spring rings, O-ringmade of NBR (Buna-N )(packed in kits)********MaterialS355J0 / C45 or equivalentSurfaceCrVI-freeSpecial Material Stainless Steel 1.4404 “-W5” on request3000 PSI Standard Pressure Series (according to ISO 6162-1)PN 501001450355053550535505Nominal Size10.9 20355053550535505Order 3101275DB-311Dimensions 7.4210,7.42for 19120,74.75130,25.13152,46.00Ø .67UNCMetr.5/16–18 UNC x 1-1/4M8x253/8–16 UNC x 1-1/4M10x303/8–16 UNC x 1-1/4M10x307/16–14 UNC x 1-1/2M12x35M10x301/2–13 UNC x 1-1/2M12x35M14x351/2–13 UNC x 1-1/2M12x35M14x351/2–13 UNC x 1-1/2M12x40M14x405/8–11 UNC x 2M16x505/8–11 UNC x 2M16x505/8–11 UNC x 2M16x505/8–11 UNC x 2M16x55The maximum working pressure applies only to the flange itself and depends on the Metric bolts (Grade 8.8 / 10.9) and UNC bolts (Gr10) used. The actual maximum working pressuredepends on the thickness and the quality of the tube used.2Dimensions of screw holes in part different to the ISO to match both Metric and UNC screws.1For flange kit part number, refer to the ordering code at the top of the page.G4www.stauff.com
SAE FlangesDimensions / Order CodesSAE Split Flange HalvesDBOrder Codes ExamplesSplit Flange SetPair of SAE Split Flange HalvesDB-.Split Flange HalfIndividual half onlyDB-.-HALFSplit Flange KitsIncl. UNC hexagon head boltsDB-.-AS-U-B#K(Gr10), spring rings, O-ring madeof NBR (Buna-N )(packed in kits)Incl. Metric hexagon headDB-.-AS-M-B#Kbolts 8.8, spring rings, O-ringmade of NBR (Buna-N )(packed in kits)********MaterialS355J0 / C45 or equivalentSurfaceCrVI-freeSpecial Material Stainless Steel 1.4404 “-W5” on request6000 PSI High Pressure Series (according to ISO 6162-2)PN 075350507535050753505075Nominal Size10.9 80040058004005800Order 2DB-606Dimensions 29.359.359,8.399,8.3912.4712.47for 2.2566,62.6266,62.6279,33.1296,83.81Ø NCMetr.5/16–18 UNC x 1-1/4M8x303/8–16 UNC x 1-1/2M10x357/16–14 UNC x 1-1/4M12x451/2–13 UNC x 1-3/4M12x45M14x455/8–11 UNC x 2M16x553/4–10 UNC x 2-1/2M20x70The maximum working pressure applies only to the flange itself and depends on the Metric bolts (Grade 8.8 / 10.9) and UNC bolts (Gr10) used The actual maximum working pressure dependson the thickness and the quality of the tube used.2Dimensions of screw holes in part different to the ISO to match both Metric and UNC screws.1G FlangesFor flange kit part number, refer to the ordering code at the top of the page.www.stauff.comG5
SAE FlangesDimensions / Order CodesSAE Flange ClampBMOrder Codes ExamplesClamp*Flange*SAE FlangeKitsBM-.UNC hexagon head bolts**Incl.(Gr10), spring rings, O-ring madeof NBR (Buna-N )(packed in kits)Incl. Metric hexagon headbolts 8.8, spring rings, O-ringmade of NBR (Buna-N )(packed in kits)**BM-.-AS-U-B#KBM-.-AS-M-B#KMaterialS355J0 / C45 or equivalentSurfaceCrVI-freeSpecial Material Stainless Steel 1.4404 “-W5” on request3000 PSI Standard Pressure Series (according to ISO 6162-1)PN 501001450355053550535505Nominal Size10.9 20355053550535505Order 3101275BM-311Dimensions 7.4210,7.42for 6.00Ø .67UNCMetr.5/16–18 UNC x 1-1/4M8x253/8–16 UNC x 1-1/4M10x303/8–16 UNC x 1-1/4M10x307/16–14 UNC x 1-1/2M12x35M10x301/2–13 UNC x 1-1/2M12x35M14x351/2–13 UNC x 1-1/2M12x35M14x351/2–13 UNC x 1-1/2M12x40M14x405/8–11 UNC x 2M16x505/8–11 UNC x 2M16x505/8–11 UNC x 2M16x505/8–11 UNC x 2M16x55The maximum working pressure applies only to the flange itself and depends on the Metric bolts (Grade 8.8 / 10.9) and UNC bolts (Gr10) used. The actual maximum working pressuredepends on the thickness and the quality of the tube used.2Dimensions of screw holes in part different to the ISO to match both Metric and UNC screws.1For flange kit part number, refer to the ordering code at the top of the page.G6www.stauff.com
SAE FlangesDimensions / Order CodesSAE Flange ClampBMOrder Codes ExamplesClamp*Flange*SAE FlangeKitsBM-.UNC hexagon head bolts**Incl.(Gr10), spring rings, O-ring madeBM-.-AS-U-B#Kof NBR (Buna-N )(packed in kits)Incl. Metric hexagon headBM-.-AS-M-B#Kbolts 8.8, spring rings, O-ringmade of NBR (Buna-N )(packed in kits)**MaterialS355J0 / C45 or equivalentSurfaceCrVI-freeSpecial Material Stainless Steel 1.4404 “-W5” on request6000 PSI High Pressure Series (according to ISO 6162-2)PN 50507535050753505075Nominal Size10.9 80040058004005800Order 2BM-606Dimensions 290,3590,359,80,399,80,39120,47120,47for 2,2566,62,6266,62,6279,33,1296,83,81Ø 10,83UNCMetr.5/16–18 UNC x 1-1/4M83/8–16 UNC x 1-1/2M 107/16–14 UNC x 1-1/4M 121/2–13 UNC x 1-3/4M 12M 145/8–11 UNC x 2M 163/4–10 UNC x 2-1/2M 20The maximum working pressure applies only to the flange itself and depends on the Metric bolts (Grade 8.8 / 10.9) and UNC bolts (Gr10) used. The actual maximum working pressuredepends on the thickness and the quality of the tube used.2Dimensions of screw holes in part different to the ISO to match both Metric and UNC screws.1G FlangesFor flange kit part number, refer to the ordering code at the top of the page.www.stauff.comG7
SAE FlangesDimensions / Order CodesSAE Split Flange Halves (Flat Style)DB-FLOrder Codes ExamplesSplit Flange SetPair of SAE Split Flange Halves (Flat Style) DB-FL-.Split Flange HalfIndividual half only (Flat Style) DB-FL-.-HALFSplit Flange KitsIncl. UNC hexagon head boltsDB-FL-.-AS-U-B#K(Gr10), spring rings, O-ringmade of NBR (Buna-N )(packed in kits)Incl. Metric hexagon headDB-FL-.-AS-M-B#Kbolts 8.8, spring rings,O-ring made of NBR (Buna-N )(packed in kits)********MaterialSurfaceC60 / C55 or equivalentCrVI-free3000 PSI Standard Pressure Series (according to ISO 6162-1)PN 900160232010014501001450Nominal Size10.9 90016023201602320Order -1/2DB-FL-307763DB-FL-308Dimensions 247,5.307,5.307,5.309.359.359.35for ,72.3169,92.7577,83.0688,93.50106,44.19Ø 17.67UNCMetr.5/16–18 UNC x 1-1/4M8x253/8–16 UNC x 1-1/4M10x303/8–16 UNC x 1-1/4M10x30M10x301/2–13 UNC x 1-1/2M12x351/2–13 UNC x 1-1/2M12x351/2–13 UNC x 1-1/2M12x405/8–11 UNC x 1-1/2M16x506000 PSI High Pressure Series (according to ISO 6162-2)PN 0753505075Nominal Size10.9 800Order 6Dimensions ,23.16C7,2.288,2.329.359,8.3912.4712.47for 279,33.1296,83.81Ø 18 UNC x 1-1/4M8x303/8–16 UNC x 1-1/2M10x35M12x45M14x455/8–11 UNC x 2M16x553/4–10 UNC x 2-1/2M20x70The maximum working pressure applies only to the flange itself and depends on the Metric bolts (Grade 8.8 / 10.9) and UNC bolts (Gr10) used. The actual maximum working pressuredepends on the thickness and the quality of the tube used.2Dimensions of screw holes in part different to the ISO to match both Metric and UNC screws.1For flange kit part number, refer to the ordering code at the top of the page.G8www.stauff.com
SAE FlangesDimensions / Order CodesSAE Flange Clamp (Flat Style)BM-FLOrder Codes ExamplesClamp (Flat Style)*Flange*SAE FlangeKitsBM-FL-.Incl. UNC hexagon head bolts**(Gr10),spring rings, O-ringBM-FL-.-AS-U-B#Kmade of NBR (Buna-N )(packed in kits)Incl. Metric hexagon headBM-FL-.-AS-M-B#Kbolts 8.8, spring rings,O-ring made of NBR (Buna-N )(packed in kits)**MaterialSurfaceC60 / C55 or equivalentCrVI-free3000 PSI Standard Pressure Series (according to ISO 6162-1)PN 900160232010014501001450Nominal Size10.9 90016023201602320Order -1/2BM-FL-307763BM-FL-308Dimensions 247,5.307,5.307,5.309.359.359.35for 658,72.3169,92.7577,83.0688,93.50106,44.19Ø 17.67UNCMetr.5/16–18 UNC x 1-1/4M8x253/8–16 UNC x 1-1/4M10x303/8–16 UNC x 1-1/4M10x30M10x301/2–13 UNC x 1-1/2M12x351/2–13 UNC x 1-1/2M12x351/2–13 UNC x 1-1/2M12x405/8–11 UNC x 2M16x506000 PSI High Pressure Series (according to ISO 6162-2)Nominal Size10.9 800Order 6Dimensions ,23.16C7,2.288.319.359,8.3912.4712.47for ,62.6279,33.1296,83.81Ø 18 UNC x 1-1/4M8x303/8–16 UNC x 1-1/2M10x35M12x45M14x455/8–11 UNC x 2M16x553/4–10 UNC x 2-1/2M20x70G FlangesPN 0753505075The maximum working pressure applies only to the flange itself and depends on the Metric bolts (Grade 8.8 / 10.9) and UNC bolts (Gr10) used. The actual maximum working pressuredepends on the thickness and the quality of the tube used.2Dimensions of screw holes in part different to the ISO to match both Metric and UNC screws.1For flange kit part number, refer to the ordering code at the top of the page.www.stauff.comG9
SAE FlangesDimensions / Order CodesSAE Flange Clamp with Metric Tapped HolesBM-GOrder Codes ExamplesFlange Clamp**SAEwith Metric tapped holesBM-G-.**Deviant Metric tapped holes (M14)BM-G-.M14MaterialS355J0 / C45 or equivalentSurfaceCrVI-freeSpecial Material Stainless Steel 1.4404 “-W5” on request3000 PSI Standard Pressure Series (according to ISO 6162-1)PN (bar)18.8Bolts35035025020020016010010035353510.9 (Gr10)Bolts350350315250200200160160353535Nominal SizeOrder CodesDimensions Ø Thread 769,977,888,9106,4120,7130,2152,4M8M10M10M10 (M12)M12 (M14)M12 (M14)M12 (M14)M16M16M16M166000 PSI High Pressure Series (according to ISO 6162-2)PN (bar)18.8Bolts35035035035035035035010.9 (Gr10)Bolts400400400400400400400Nominal SizeOrder CodesDimensions 454,854,864,380,2Ø 10M12M12M14M16M20The maximum working pressure applies only to the flange itself and depends on the Metric bolts (Grade 8.8 / 10.9) and UNC bolts (Gr10) used. The actual maximum working pressuredepends on the thickness and the quality of the tube used.2Alternative options shown in brackets are available on request.1G10www.stauff.com
SAE FlangesDimensions / Order CodesSAE Butt Weld Flange Adapter / SAE Butt Weld Companion Flange AdapterCAG/CSG-STOrder Codes ExamplesButt Weld Flange Adapter**SAE(without O-ring)CAG-.-ST-/Butt Weld Companion**SAEFlange AdapterCSG-.-ST-/Flange KitsUNC hexagon head bolts CAG-.-ST**Incl.(Gr10), spring rings, O-ring made/-U#Kof NBR (Buna-N ) and DB (packed in kits)Incl. UNC hexagonCAG-.-ST- / -V-U-BM#K**headbolts (Gr10), spring rings, O-ring madeof FPM (Viton ) and BM (packed in kits)Metric hexagon headCAG-.-ST**Incl.bolts 8.8, spring rings, O-ring made/#KMaterialS355J0 or equivalentSurfaceblank, oiledSpecial Material Stainless Steel 1.4571 “-W5” on requestof NBR (Buna-N ) and DB (packed in kits)/Please indicate pipe-OD and pipe-ID3000 PSI Standard Pressure Series (according to ISO 6162-1)PN (bar)18.8Bolts35035025020020016010010035353510.9 (Gr10)Bolts350350315250200200160160353535Nominal SizeOrder /411-1/41-1/222-1/233-1/245Dimensions (mm)Ø A min.12131919303847587397120///////////Ø B 14,3127152,4L4150505557575860808080Ø B 63,579,4L3438404550586000 PSI High Pressure Series (according to ISO 6162-2)PN (bar)18.8Bolts35035035035035035010.9 (Gr10)Bolts400400400400400400Nominal SizeOrder 22Dimensions (mm)//////2Ø A min.101218192832The maximum working pressure applies only to the flange itself and depends on the Metric bolts (Grade 8.8 / 10.9) and UNC bolts (Gr10) used. The actual maximum working pressuredepends on the thickness and the quality of the tube used.2According to ISO 6162-2 bolts M12 should be used but because usually bolts M14 are used the description of the complete part must show M14 (e.g. CAG-604-ST- / -M14#K).1G FlangesFor flange kit part number, refer to the ordering code at the top of the page.www.stauff.comG11
SAE FlangesDimensions / Order CodesSAE Socket Weld Flange Adapter / SAE Socket Weld Companion Flange AdapterCAG/CSG-ESOrder Codes ExamplesSocket Weld Flange Adapter**SAE(without O-ring)CAG-.-ES-.Socket Weld**SAECompanion Flange AdapterCSG-.-ES-.Flange KitsIncl. UNC hexagon head boltsCAG-.-ES-.-U#K(Gr10), spring rings, O-ring made of NBR (Buna-N )and DB (packed in kits)Incl. UNC hexagon head bolts CAG-.-ES-.-V-U#K(Gr10), spring rings, O-ring made of FPM (Viton )and DB (packed in kits)Incl. Metric hexagon head bolts 8.8, CAG-.-ES-.#Kspring rings, O-ring made of NBR (Buna-N ) and DB(packed in kits)******MaterialS355J0 or equivalentSurfaceblank, oiledSpecial Material Stainless Steel 1.4571 “-W5” on request3000 PSI Standard Pressure Series (according to ISO 6162-1)PN 10010.9 Nominal SizeOrder CodesDimensions 41,347,6ØE3232404048M1313131316L60606868756000 PSI High Pressure Series (according to ISO 6162-2)PN (bar)18.8Bolts350350350350350110.9 (Gr10)Bolts400400400400400Nominal SizeOrder CodesDimensions 4/25ØA20,521,725,727,334,0(in)1/21/23/43/41The maximum working pressure applies only to the flange itself and depends on the Metric bolts (Grade 8.8 / 10.9) and UNC bolts (Gr10) used. The actual maximum working pressuredepends on the thickness and the quality of the tube used.For flange kit part number, refer to the ordering code at the top of the page.G12www.stauff.com
SAE FlangesG FlangesNoteswww.stauff.comG13
SAE FlangesDimensions / Order CodesSAE Single-Part Screw-in NPT Threaded FlangeBFX-NOrder Codes ExamplesSingle-Part FlangeSAE Single-Part Screw-inBFX-.-NNPT Threaded Flange (without O-ring)Flange KitsIncluding UNC bolts (Gr10),BFX-.-N-U#Kspring rings, O-ring made of NBR (Buna-N )(packed in kits)Including UNC bolts (Gr10),BFX-.-N-V-U#Kspring rings, O-ring made of FPM (Viton )(packed in kits)Including Metric bolts 8.8,BFX-.-N #Kspring rings, O-ring made of NBR (Buna-N )(packed in kits)********MaterialS355J0 or equivalen
STAUFF Corperation Call us today 201.444.7800 or visit www.stauff.com CLAMPS TEST FILTRATION DIAGTRONICS ACCESSORIES VALVES FLANGES ACCUMULATORS Flanges stauff.com The STAUFF range of flanges gives you extensive product diversity, whether it is the DIN ISO 6162-1/2 range or SAEJ518 complian
707 SW 19th Ave. Williston, FL 32696 1-800-FLANGE1 352-528-4100 www.ancorp.com 5 QF63 Flanges QF80 Flanges QF100 Flanges QF160 Flanges QF200 Flanges ANCORP now offers quick flanges up to size QF200 (8 inch tube outer diameter). ISO standards only
Flanges CL150 ASME B16.5 Note 1: Socket weld flanges up to 3" in this pressure rating. Note 2: For Lapped flanges, add 1.6mm to tf dimension. Note 3: Threaded Flanges shall have a taper pipe thread conforming to ASME B1.20.1 Pipe Refer to ASME B36 - 10 / B36 - 19 or as specified by purchaser No counter bore required on threaded flanges .
RF GORE DIN Swivel flanges Fixed flanges Flange gasket Swivel flanges Fixed flanges Flange gasket. FLANGES DIMENSIONS EN-DIN PN ASTM EN-DIN PN 6 EN-DIN PN 10 EN-DIN PN 16 EN-DIN PN 25 EN-DIN PN 40 ND D K N D2 D K N D2 D K N D2 D K N D2 D K N D2 1/2" 15 80 55 4 11 95 65 4 14 95 65 4 14 95 65 4 14 95 65 4 14
Metallic butterfly valves BS EN 1092-1:2007 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges BS EN 1092-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Copper alloy flanges BS EN 12516:2005 Series Industrial Valves .
The STAUFF range of flanges gives you extensive product diversity, whether it is the DIN ISO 6162-1/2 range or SAEJ518 compliant SAE flanges, as well as the range of gear pump flanges. The standard pressure series of
FLANGES AND FITTINGS ISO-KF Flanges and Fittings Easy and reliable ISO-KF Flanges and Fittings allow quick release and tight connections from 10 to 50 mm nominal diameters. With 2 flanges coupled together by a cente-ring ring with a O-ring and a clamp (Fig. 1 & 2), this kind of connection provides many advantages such as: Easy and quick .
SQUARE FLANGES Square Flanges Specifications: JIS B2291 - Socket Welding Pipe Flanges to be used for Pressures of 210 kg/cm² JIS F7806 - Socket Welding Pipe Flanges to be used for Pressures of 280 kg/cm² and 350 kg/cm² Material Specifications: (SF440A) Hydraulic Steel (SS316) Stainless Steel Size Range:
The “Agile Software Development Manifesto” was developed in February 2001, by representatives from many of the fledgling “agile” processes such as Scrum, DSDM, and XP. The manifesto is a set of 4 values and 12 principles that describe “What is meant by Agile". THE AGILE VALUES 1. Individuals and interactions over processes and tools 2. Working software over comprehensive .
