HIGH TENSILE : METRI VS. IMPERIAL LASS VS. GRADE METRI .
HIGH TENSILE : METRIC VS. IMPERIALCLASS VS. GRADEMETRICIMPERIALLOW TENSILEHIGH TENSILEHIGH TENSILECLASS 4.6CLASS 8.8CLASS 10.9GRADE 2GRADE 5GRADE 8WHAT DOES 8.8 MEAN ?8 BREAKING STRENGTH 800 MPa.8 YIELD STRENGTH(WHEN THE BOLT BECOMES PERMANENTLY STRETCHED)
1606101HAHOBSONARTICLESHigh-Tensile andStainless Steel Head MarkingsImperialHead MarkingNo markings3 radial lines6 radial linesNominalSize RangeGrade andMaterialGrade 2Low or medium CarbonSteelGrade 5Medium Carbon Steel,quenched and temperedMechanical Properties(inches)Proof Load(psi)Min. YieldStrength (psi)Min. TensileStrength (psi)1/4 through 3/455,00057,00074,000Over 3/4 through1-1/233,00036,00060,0001/4 through 185,00092,000120,000Over 1 00Grade 8Medium Carbon Alloy 1/4 through 1-1/2quenched and temperedMetric BoltsHead MarkingClass and MaterialNominalSize RangeMechanical PropertiesProof Load(MPa)Min. YieldStrength (MPa)Min. TensileStrength (MPa)All sizes belowM16580640800M16 - M726006608308.8Class 8.8Medium Carbon Steel,quenched and temperedM6 - M48830940104010.9Class 10.9Alloy Steel, quenchedand temperedM6 - M489701100122012.9Class 12.9Alloy Steel, quenchedand temperedClass 50Austenitic Steel with16-18.5% Chromiumand 10-15% NickelM20 - M48–210500Class 70Austenitic Steel with16-18.5% Chromiumand 10-15% NickelM6 - M20–450700Class 80Austenitic Steel with16-18.5% Chromiumand 10-15% NickelM6 - M36–600800A4A4-70A4-80www.hobson.com.auCopyright 2016 Hobson Engineering Company Pty. Ltd. All rights reserved. Release date 10/06/2016.1
Breaking Strengthv.1.5Quality Fasteners Since 1935 August 2007
FASTENER ACRONYMS - HOBSONMEANINGACRONYM2H D/EDINDTIF436FHCSFWGrHDGHRBHRCHSFGHWHNut strength level designation (ASTM A194 Grade 2H Heavy Hex Nut)Class of thread fit for metric screwsClass of thread fit for metric nutsBearing joint as per AS4100 - bolting to be fully tensionedSnug Tight as per AS4100 (Non Bearing / Friction Joint)Friction joint as per AS4100 - bolting to be fully tensionedA Austenitic steel (300 series) / 4 Cold formed stainless 316 / 50 500 Mpa Tensile StrengthA Austenitic steel (300 series) / 4 Cold formed stainless 316 / 70 700 Mpa Tensile StrengthA Austenitic steel (300 series) / 4 Cold formed stainless 316 / 80 800 Mpa Tensile StrengthWidth Across Flats - Spanner SizeAmerican Iron and Steel Institute, specifies chemical composition of steelsAmerican National Standards InstituteAmerican Society of Mechanical EngineersAmerican Society for Testing and MaterialsAll thread - fully threaded rodSud bolt grade - Petrochemical Stud bolts for flanges Re ASTM-A193Sud bolt grade - Petrochemical Stud bolts for flanges Re ASTM-A193Sud bolt grade AISI Type 304 - Petrochemical Stud bolts for flanges Re ASTM-A193Sud bolt grade AISI Type 316 - Petrochemical Stud bolts for flanges Re ASTM-A193British AssociationButton Head Cap ScrewHardness measured with a Brinell Hardness TesterBritish StandardBritish Standard FineBritish Thread Standard WhitworthC1018 low carbon steel with a medium range manganese contentCadmium PlatingClass 3 Coating for Self drilling Screws as per AS3566.2Class 4 Coating for Self drilling Screws as per AS3566.2Countersunk HeadDouble Ended StudGerman Standards OrganizationDirect Tension Indicator - Squirter WasherHardened flat washer with dimensions per ASTM F436Flat Head (Countersunk) Cap ScrewFlat WasherImperial Grade-strength level of screw or nut (ex: Grade 2, Grade 5 or Grade 8)Hot Dip GalvanizedHardness measured on the Rockwell B ScaleHardness measured on the Rockwell C ScaleHigh Strength Friction Grip - Structural BoltingHex Washer HeadPage 1 of 2
FASTENER ACRONYMS - HOBSONMEANINGACRONYMIDIFIISOksiLWL7lb (lbs)LHLHCSLTmmMPaMTRMTSNATANPTODPh DrpsiPTFEPZROHSSAESemsSerratedSHCSSS or nside diameter-washerIndustrial Fastener InstituteInternational Standards OrganizationThousand of pounds per square inchLock WasherSud bolt grade - Petrochemical Stud bolts for flanges Re ASTM-A320PoundsLeft Hand ThreadLow Head Socket Head Cap ScrewLow Tensile Carbon Steel Class 4.6MillimeterMega PascalMaterial Test ReportMetal Thread ScrewNational Association Of Testing AuthoritiesNational Tapered Pipe ThreadOutside diameter-washerPhillips Drive (cross recess)Pounds per square inchPolytetrafluoroethylene (best known brand name Teflon)Pozi-Drive style of cross recessRistriction of Hazardous SubstancesSociety of Automotive EngineersScrew with permanantly attached washerLocking serrations on bearing face of bolt or nutSocket Head Cap ScrewStainless SteelStainless Steel Grade 304Stainless Steel Grade 316Drill point for timber self drilling screw ( will drill through thin metal into timber)Triangular thread forming screw6 Lobe Drive -Torx DriveThreads per InchUnified National - 8 threads per inch (applies to petro studs 1" and above)Unified National Coarse ThreadUnified National Fine ThreadUltimate Tensile StrengthYellow ChromateYield StrengthZinc, usually referencing zinc plating (zinc with clear chromate)Zinc Plating with Yellow Chromate topcoatPage 2 of 2
ASTM American Society for Testing and Materials AT All thread - fully threaded rod B16 Sud bolt grade - Petrochemical Stud bolts for flanges Re ASTM-A193 B7 Sud bolt grade - Petrochemical Stud bolts for flanges Re ASTM-A193 B8 Sud bolt grade AISI Type 304 - Petrochemical Stud bolts f
Piling Shackle Dee Shackles Product Code Description S.W.L up to HDS2T High Tensile 2t HDSE5T High Tensile 5t HDS10T High Tensile 10t HDS25T High Tensile 25t HDS50T High Tensile 50t HDS85T High Tensile 85t HDS100T High Tensile 100t HDS150T High Tensile 150t HDS300T High Tensile 300t An ext
Jul 22, 2020 · Imperial Great Seal of the Imperial Mu'urish Yamaxi Consular Court: Imperial Mission of the Imperial Judiciary Administration for the Imperial Royal Kingdom, uSA/USA: C ountry of United -states/ Imperial Moorish Al oroccan (American) Empire via His ajesty's Royal Post pursuant to
97 8 24th & imperial auto repair 2401 imperial av yes no n/a no 85 8 2509 imperial ave 2509 imperial ave yes yes unknown no 40 8 2644 island ave. property 2644 island av no yes open no 151 8 28th and webster avenue no no n/a no 84 9 3193 imperial ave 3193 imperial ave yes yes unknown no 84 9 3193 imperial ave. transformer location 3193 imperial .
Imperial Off White Imperial White 74 30x90cm 12"x35" 30x90cm 12"x35" f:01 f:01 IMPERIAL Monoporosa Wall Tile Parede Imperial Beige 30x90cm 12"x35" Imperial Grafiti 30x90cm 12"x35" Imperial Grey 30x90cm 12"x35" f:01 f:01 f:01 APOLO Monoporosa Wall Tile Parede Apolo Bianco 30,5x60,5cm F or m
2.4. Tensile Test of Nanocomposites A tensile test of all samples was carried out by a tensile tester (Instron 1196, Instron Corporation, Norwood, MA, USA) with a crosshead speed of 10 mm/min at room temperature. The tensile strength and tensile modulus of specimens were determined at the yield point and 0.5% strain, respectively.
IMPERIAL BIANCO MATTE A tile with a uniform, bone white color and a non-glossy finish. 440705 PRODUCT 6in SIZE Imperial Bianco Crazed 15x15cm DESCRIPTION Crazed FINISH 442005 440655 3x6in 4x8in Imperial Bianco Matte 7.5x15cm Imperial Bianco
Tensile Strength @ 0º ASTM D6637 lbs/in (kN/m) 655 (115) 459 (80) Tensile Strength @ 90º Method A lbs/in (kN/m) 655 (115) 459 (80) Tensile Strength @ 45º modified 459 (80) Tensile Strength @ -45º 459 (80) Tensile Elongation % 3 3 Melting Point ASTM D276 Fº (Cº) Glass filaments a
automotive industry based on patents and text-mining of company websites. The third section presents findings about private equity investment and startup/spinoff activity. The fourth section explores the supply and demand of skills related to advanced technologies in the automotive industry. The fifth chapter concludes with a short future outlook. Section . Technological trends of .
