Topic Page - Zona Industrial SpA
Technical Data1756 ControlLogix I/O Modules SpecificationsCatalog Numbers 1756 seriesTopicPageAvailable 1756 I/O Modules3Digital I/O Modules3Analog I/O Modules5Specialty I/O Modules5Module Specifications6ControlLogix I/O Accessories184The ControlLogix architecture provides a wide range of input and outputmodules to span many applications, from high-speed digital to process control.The ControlLogix architecture uses Producer-Consumer technology, whichallows input information and output status to be shared among multipleControlLogix controllers.Each ControlLogix I/O module mounts in a ControlLogix chassis and requireseither a removable terminal block (RTB) or a 1492 interface module (IFM) toconnect all field-side wiring. RTBs and IFMs are not included with the I/Omodules. They must be ordered separately.6 / 2011www.klinkmann.com
1756 ControlLogix I/O Modules Specifications6 / 2011www.klinkmann.comImportant User InformationSolid state equipment has operational characteristics differing from those of electromechanical equipment. SafetyGuidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available fromyour local Rockwell Automation sales office or online at http://www.rockwellautomation.com/literature/) describes someimportant differences between solid state equipment and hard-wired electromechanical devices. Because of this difference,and also because of the wide variety of uses for solid state equipment, all persons responsible for applying this equipmentmust satisfy themselves that each intended application of this equipment is acceptable.In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from theuse or application of this equipment.The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables andrequirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility orliability for actual use based on the examples and diagrams.No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, orsoftware described in this manual.Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,Inc., is prohibited.Throughout this manual, when necessary, we use notes to make you aware of safety considerations.WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardousenvironment, which may lead to personal injury or death, property damage, or economic loss.IMPORTANTIdentifies information that is critical for successful application and understanding of the product.ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death,property damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize theconsequenceSHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people thatdangerous voltage may be present.BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people thatsurfaces may reach dangerous temperatures.Rockwell Automation, Rockwell Software, Allen-Bradley, TechConnect, ControlLogix, GuardLogix, and RSLogix 5000 are trademarks of Rockwell Automation, Inc.Trademarks not belonging to Rockwell Automation are property of their respective companies.2Rockwell Automation Publication 1756-TD002C-EN-E - September 2010
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules SpecificationsAvailable 1756 I/O ModulesI/O TypeCatalog NumberPageCatalog NumberPageAC 756-OA161756-OA16I1756-ON8929598101104155DC CI1756-OF6VI1756-OF8134137140143HART lty1756-CFM1756-HSC1701751756-PLS179Digital I/O ModulesThe 1756 digital I/O modules support these features: Variety of voltage interface capabilities Isolated and nonisolated module types Point-level output fault states Direct-connect or rack-optimized communication Field-side diagnostics on select modulesRockwell Automation Publication 1756-TD002C-EN-E - September 20103
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules SpecificationsIn addition, you can select these types of digital I/O modules.4Digital I/O TypeDescriptionDiagnosticThese modules provide diagnostic features to the point level. These modules have a D at the end ofthe catalog number.Electronic fusingThese modules have internal electronic fusing to prevent too much current from flowing through themodule. These modules have an E at the end of the catalog number.Individually isolatedThese modules have individually isolated inputs or outputs.These modules have an I at the end of the catalog number.Module TypeFeatures1756 digital AC input modules 1756 digital AC output modules Scheduled outputs: Synchronization within 16.7 seconds maximum, reference to the CoordinatedSystem Time Fault states per point: Hold last state, on or off (off is default) States in Program mode per point: Hold last state, on or off (off is default) Fusing:– 1756-OA8D, 1756-OA8E: Electronically fused per point– 1756-OA16: Mechanically fused/group, 3.15 A @ 250V AC slow blow, 1500 A interruptioncurrent, Littelfuse p/n H2153.15– All other modules: Not protected. A fused IFM is recommended to protect outputs Module keying: Electronic, software configurable RTB keying: User-defined mechanical1756 digital DC input modules Reverse polarity protection: All modules except 1756-IG16 module Change of state: Software configurable Timestamp of inputs:– 100 μs for sequence of events modules– 200 μs for all other modules Module keying: Electronic, software configurable RTB Keying: User-defined mechanical1756 digital DC output modules Scheduled outputs: Synchronization within 16.7 seconds maximum, reference to the CoordinatedSystem Time Fault states per point: Hold last state, on or off (off is default) States in Program mode per point: Hold last state, on or off (off is default) Fusing:– 1756-OB8EI, 1756-OB16D: Electronically fused per point– 1756-OB16E, 1756-OV16E, 1756-OV32E: Electronically fused per group– All other modules. Not protected. A fused IFM is recommended to protect outputs Module keying: Electronic, software configurable RTB keying: User-defined mechanical1756 digital contact modules Scheduled outputs: Synchronization within 16.7 seconds maximum, reference to the CoordinatedSystem Time Configurable fault states per point: Hold last state, on or off (off is default) Configurable states in Program mode per point: Hold last state, on or off (off is default) Fusing: Not protected. A fused IFM is recommended to protect outputs Module keying: Electronic, software configurable RTB keying: User-defined mechanicalChange of state: Software configurableTimestamp of inputs: 200 μsModule keying: Electronic, software configurableRTB keying: User-defined mechanicalRockwell Automation Publication 1756-TD002C-EN-E - September 2010
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules SpecificationsAnalog I/O ModulesThe 1756 digital I/O modules support these features.Module TypeFeatures1756 analog input modules On-board data alarmingScaling to engineering unitsReal-time channel samplingData format: Integer mode (left justified, 2s complement) IEEE 32-bit floating pointModule conversion method: Sigma-Delta1756 analog output modules Data format: Integer mode (left justified, 2s complement) IEEE 32-bit floating pointModule conversion method: R-Ladder DAC, monotonicity with no missing codesModule keying: Electronic, software configurableRTB keying: User-defined mechanical1756 high-speed analog combination module Data format: Integer mode (left justified, 2s complement) IEEE 32-bit floating pointInput conversion method: Successive approximationOutput conversion method: R-Ladder DAC, monotonicity with no missing codesModule keying: Electronic, software configurableRTB keying: User-defined mechanical1756 analog RTD and thermocouple modules Data format: Integer mode (left justified, 2s complement) IEEE 32-bit floating pointModule conversion method: Sigma-DeltaModule keying: Electronic, software configurableRTB keying: User-defined mechanical1756 analog modules with HART interface Data format: Integer mode (left justified, 2s complement), Floating point IEEE 32 bitInput conversion method: Successive approximationOutput conversion method: R-Ladder DAC, monotonicity with no missing codesModule keying: Electronic, software configurableRTB keying: User-defined mechanicalSpecialty I/O ModulesThese specialty modules are available.Module TypeFeatures1756-CFM configurable flow meter moduleThe 1756-CFM module provides Totalizer mode for metering applications, or high-speed frequencymeasurements for speed or rate control applications, on two channels connected to flowmeters. Totalizer fill and prover High-resolution 100 kHz max Frequency 0.0005 Hz resolution Reverse polarity protection: Outputs only Module keying: Electronic, software configurable RTB keying: User-defined mechanical1756-HSC high-speed counter moduleThe 1756-HSC module provides four high-speed, output-switching, on-off windows. The moduleuses pulses for counting and frequency. Counter: 1 MHz max Rate measurement: 500 kHz max Encoder: 250 kHz max Debounce filter: 70 Hz max Module keying: Electronic, software configurable RTB keying: User-defined mechanical keying1756-PLS programmable limit switch moduleThe 1756-PLS module supports enhanced packaging applications. Requires three contiguous slots in chassis RTB keying: User-defined mechanicalRockwell Automation Publication 1756-TD002C-EN-E - September 20105
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules Specifications1756-IA8DControlLogix AC (79.132V) diagnostic input module1756-IA8DSimplified Schematic 5V2143658710912111413161518172019Not UsedDaisy Chain toOther RTBsInputDisplayGNDGND 5V ControlLogixBackplane InterfaceOpen WireDisplayControlLogixBackplane InterfaceL1-0 Loss of Field PowerL2-0IN-0L2-0Group 1 Loss of Field PowerL2L1ST 0 1 2 3 4 5 6 7 OFLT 0 1 2 3 4 5 6 7 KDIAGNOSTICAttribute1756-IA8DOpen wireOff-state leakage current 1.5 mA minLoss of powerTransition range 46 85V ACTimestamp of diagnostics 1 msAttribute1756-IA8DInputs8 diagnostic (4 points/group)Voltage category120V ACOperating voltage range79 132V AC,47 63 HzInput voltage, nom120V ACInput delay timeOFF to ONON to OFF647 kΩ, 1/2 W,5% ResistorIN-7L2-1AC INPUT47 kΩ, 1/2 W5% ResistorIN-4L2-1Group 1Group0Hardware delay: 10 ms max filter timeUser-selectable filter time: 1 or 2 msHardware delay: 8 ms max filter timeUser-selectable filter time: 9 or 18 msCurrent draw @ 5.1V100 mACurrent draw @ 24V3 mAPower dissipation, max4.5 W @ 60 C (140 F)Thermal dissipation15.35 BTU/hrOff-state voltage, max20VOff-state current, max2.5 mARockwell Automation Publication 1756-TD002C-EN-E - September 2010
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules SpecificationsAttribute1756-IA8DOn-state current, min5 mA @ 74V ACOn-state current, max16 mA @ 132V ACInrush current, max250 mAInput impedance, max8.25 kΩ @ 132V AC, 60 HzCyclic update time200 μs.750 msIsolation voltage125V (continuous), basic insulation type, inputs-tobackplane, and input group-to-groupNo isolation between individual group inputsRoutine tested @ 1200V AC for 2 sRemovable terminal block housing1756-TBNH1756-TBSHSlot width1Wire size0.33. 2.1 mm2 (22.14 AWG) solid or stranded copperwire rated at 90 C (194 F), or greater, 1.2 mm (3/64 in.)insulation max(1)Wire category1(2)North American temperature codeT4AEnclosure typeNone (open-style)(1) Maximum wire size requires extended housing, catalog number 1756-TBE.(2) Use this conductor category information for planning conductor routing as described in the system-levelinstallation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.Attribute1756-IA8DTemperature, operatingIEC 60068-2-1 (Test Ad, Operating Cold),IEC 60068-2-2 (Test Bd, Operating Dry Heat),IEC 60068-2-14 (Test Nb, Operating Thermal Shock)0 60 C (32 140 F)Temperature, surrounding air60 C (140 F)Temperature, storageIEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)-40 85 C (-40 185 F)Relative humidityIEC 60068-2-30 (Test Db, Unpackaged Nonoperating Damp Heat)5 95% noncondensingVibrationIEC 60068-2-6 (Test Fc, Operating)2 g @ 10 500 HzShock, operatingIEC 60068-2-27 (Test Ea, Unpackaged Shock)30 gShock, nonoperatingIEC 60068-2-27 (Test Ea, Unpackaged Shock)50 gEmissionsCISPR 11: Group 1, Class AESD immunityIEC 61000-4-26 kV contact discharges8 kV air dischargesRadiated RF immunityIEC 61000-4-310V/m with 1 kHz sine-wave 80% AM from 80. 2000 MHz10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz3V/m with 1 kHz sine-wave 80% AM from 2000.2700 MHzRockwell Automation Publication 1756-TD002C-EN-E - September 20107
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules SpecificationsAttribute1756-IA8DEFT/B immunityIEC 61000-4-4 4 kV at 5 kHz on signal portsSurge transient immunityIEC 61000-4-5 1 kV line-line (DM) and 2 kV line-earth (CM) on signal portsConducted RF immunityIEC 61000-4-610Vrms with 1 Hz sine-wave 80% AM from 150 kHz.80 MHzCertification(1)1756-IA8DULUL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.CSACSA Certified Process Control Equipment. See CSA File LR54689C.CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA FileLR69960C.CEEuropean Union 2004/108/IEC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)European Union 2006/95/EC LVD, compliant with: EN 61131-2; Programmable Controllers)C-TickAustralian Radiocommunications Act, compliant with:AS/NZS CISPR 11; Industrial EmissionsFMFM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous LocationsTÜVTÜV Certified for Functional Safety:Capable of SIL 2(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.8Rockwell Automation Publication 1756-TD002C-EN-E - September 2010
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules Specifications1756-IA16ControlLogix AC (79.132V) input module1756-IA16Simplified Schematic143658710912111413161518172019IN-0Group 0 5VIN-O2IN-1DaisyChain rolLogix DisplayBackplaneInterfaceL2-0IN-9IN-8IN-11Group 1IN-10IN-13IN-12L2-1L2-1L2ST 0 1 2 3 4 5 6 7 OFLT 0 1 2 3 4 5 6 7 KDIAGNOSTICAttribute1756-IA16Inputs16 (8 points/group)Voltage category120V ACOperating voltage range74 132V AC,47 63 HzInput voltage, nom120V ACInput delay timeOFF to ONON to OFFGroup 1IN-14IN-15AC INPUTGroup 0L1Hardware delay: 10 ms max filter timeUser-selectable filter time: 1 or 2 msHardware delay: 8 ms max filter timeUser-selectable filter time: 9 or 18 msCurrent draw @ 5.1V105 mACurrent draw @ 24V2 mAPower dissipation, max5.8 W @ 60 C (140 F)Thermal dissipation18.41 BTU/hrOff-state voltage, max20VOff-state current, max2.5 mAOn-state current, min5 mA @ 74V ACOn-state current, max13 mA @ 132V ACRockwell Automation Publication 1756-TD002C-EN-E - September 20109
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules SpecificationsAttribute1756-IA16Inrush current, max250 mA peak (decaying to 37% in 22 ms, withoutactivation)Input impedance, max10.15 kΩ @ 132V AC, 60 HzCyclic update time200 μs.750 msIsolation voltage125V (continuous), basic insulation type, inputs-tobackplane, and input group-to-groupNo isolation between individual group inputsRoutine tested @ 1200V AC for 2 sRemovable terminal block housing1756-TBNH1756-TBSHSlot width1Wire size0.33. 2.1 mm2 (22.14 AWG) solid or stranded copperwire rated at 90 C (194 F), or greater, 1.2 mm (3/64 in.)insulation max(1)Wire category1(2)North American temperature codeT4Enclosure typeNone (open-style)(1) Maximum wire size requires extended housing, catalog number 1756-TBE.(2) Use this conductor category information for planning conductor routing as described in the system-levelinstallation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.Attribute1756-IA16Temperature, operatingIEC 60068-2-1 (Test Ad, Operating Cold),IEC 60068-2-2 (Test Bd, Operating Dry Heat),IEC 60068-2-14 (Test Nb, Operating Thermal Shock)0 60 C (32 140 F)Temperature, surrounding air60 C (140 F)Temperature, storageIEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)-40 85 C (-40 185 F)Relative humidityIEC 60068-2-30 (Test Db, Unpackaged Nonoperating Damp Heat)5 95% noncondensingVibrationIEC 60068-2-6 (Test Fc, Operating)2 g @ 10 500 HzShock, operatingIEC 60068-2-27 (Test Ea, Unpackaged Shock)30 gShock, nonoperatingIEC 60068-2-27 (Test Ea, Unpackaged Shock)50 gEmissionsCISPR 11: Group 1, Class AESD immunityIEC 61000-4-26 kV contact discharges8 kV air dischargesRadiated RF immunityIEC 61000-4-310V/m with 1 kHz sine-wave 80% AM from 80. 2000 MHz10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz3V/m with 1 kHz sine-wave 80% AM from 2000.2700 MHzEFT/B immunityIEC 61000-4-4 4 kV at 5 kHz on signal ports10Rockwell Automation Publication 1756-TD002C-EN-E - September 2010
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules SpecificationsAttribute1756-IA16Surge transient immunityIEC 61000-4-5 1 kV line-line (DM) and 2 kV line-earth (CM) on signal portsConducted RF immunityIEC 61000-4-610Vrms with 1 kHz sine-wave 80% AM from 150 kHz.80 MHzOscillatory surge withstandIEEE C37.90.13 kVCertification(1)1756-IA16ULUL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.CSACSA Certified Process Control Equipment. See CSA File LR54689C.CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA FileLR69960C.CEEuropean Union 2004/108/IEC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)European Union 2006/95/EC LVD, compliant with: EN 61131-2; Programmable ControllersC-TickAustralian Radiocommunications Act, compliant with:AS/NZS CISPR 11; Industrial EmissionsFMFM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.Rockwell Automation Publication 1756-TD002C-EN-E - September 201011
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules Specifications1756-IA16IControlLogix AC (79.132V) isolated input moduleSimplified SchematicL2-0 olLogix DisplayBackplaneInterfaceJumper Bar(Cut to Length)NonisolatedWiringAdditional jumper bars are available ascat. no. -3L2-4109IN-4L2-512 11IN-5L2-614 13IN-6L2-716 15IN-7L2-818 17IN-8L2-920 19IN-9L2-1022 21IN-10L2-1124 23IN-11L2-1226 25IN-12L2-13L2-1428 2730 29IN-13IN-14L2-1532 31IN-15L2-15Not used34 33Not UsedNot UsedL2-0L2-136 35Daisy Chain toOther RTBsAC INPUTST 0 1 2 3 4 5 6 7 OST 8 9 10 11 12 13 14 15 KAttribute1756-IA16IInputs16 individually isolatedVoltage category120V ACOperating voltage range79 132V AC,47 63 HzInput voltage, nom120V ACInput delay timeOFF to ONON to OFF12Hardware delay: 10 ms max filter timeUser-selectable filter time: 1 or 2 msHardware delay: 8 ms max filter timeUser-selectable filter time: 9 or 18 msCurrent draw @ 5.1V125 mACurrent draw @ 24V3 mAPower dissipation, max4.9 W @ 60 C (140 F)Thermal dissipation16.71 BTU/hrOff-state voltage, max20VOff-state current, max2.5 mAOn-state current, min5 mA @ 79V AC, 47 63 HzOn-state current, max15 mA @ 132V AC, 47 63 HzInrush current, max250 mARockwell Automation Publication 1756-TD002C-EN-E - September 2010L1-4L1
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules SpecificationsAttribute1756-IA16IInput impedance, max8.8 kΩ @ 132V AC, 60HzCyclic update time200 μs.750 msIsolation voltage125V (continuous), basic insulation type, inputs-tobackplane, and input-to-inputRoutine tested @ 1200V AC for 2 sRemovable terminal block housing1756-TBCH1756-TBS6HSlot width1Wire size0.33. 2.1 mm2 (22.14 AWG) solid or stranded copperwire rated at 90 C (194 F), or greater, 1.2 mm (3/64 in.)insulation max(1)Wire category1(2)North American temperature codeT4AEnclosure typeNone (open-style)(1) Maximum wire size requires extended housing, catalog number 1756-TBE.(2) Use this conductor category information for planning conductor routing as described in the system-levelinstallation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.Attribute1756-IA16ITemperature, operatingIEC 60068-2-1 (Test Ad, Operating Cold),IEC 60068-2-2 (Test Bd, Operating Dry Heat),IEC 60068-2-14 (Test Nb, Operating Thermal Shock)0 60 C (32 140 F)Temperature, surrounding air60 C (140 F)Temperature, storageIEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)-40 85 C (-40 185 F)Relative humidityIEC 60068-2-30 (Test Db, Unpackaged Nonoperating Damp Heat)5 95% noncondensingVibrationIEC 60068-2-6 (Test Fc, Operating)2 g @ 10 500 HzShock, operatingIEC 60068-2-27 (Test Ea, Unpackaged Shock)30 gShock, nonoperatingIEC 60068-2-27 (Test Ea, Unpackaged Shock)50 gEmissionsCISPR 11: Group 1, Class AESD immunityIEC 61000-4-26 kV contact discharges8 kV air dischargesRadiated RF immunityIEC 61000-4-310V/m with 1 kHz sine-wave 80% AM from 80. 2000 MHz10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz3V/m with 1 kHz sine-wave 80% AM from 2000.2700 MHzEFT/B immunityIEC 61000-4-4 4 kV at 5 kHz on signal portsSurge transient immunityIEC 61000-4-5 1 kV line-line (DM) and 2 kV line-earth (CM) on signal portsConducted RF immunityIEC 61000-4-610Vrms with 1 kHz sine-wave 80% AM from 150 kHz.80 MHzOscillatory surge withstandIEEE C37.90.13 kVRockwell Automation Publication 1756-TD002C-EN-E - September 201013
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules SpecificationsCertification(1)1756-IA16IULUL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.CSACSA Certified Process Control Equipment. See CSA File LR54689C.CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA FileLR69960C.CEEuropean Union 2004/108/IEC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)European Union 2006/95/EC LVD, compliant with: EN 61131-2; Programmable ControllersC-TickAustralian Radiocommunications Act, compliant with:AS/NZS CISPR 11; Industrial EmissionsFMFM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous LocationsTÜVTÜV Certified for Functional Safety:Capable of SIL 2(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.14Rockwell Automation Publication 1756-TD002C-EN-E - September 2010
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules Specifications1756-IA32ControlLogix AC (74.132V) input moduleSimplified Schematic1756-IA32 5VIN-OL2-0Group 0GNDDaisy Chainto Other RTBsControlLogix DisplayBackplaneInterfaceGroup IN-21IN-23IN-25IN-27IN-29IN-31L2-12143658710912 1114 1316 1518 1720 1922 2124 2326 2528 2730 2932 3134 3336 8IN-20IN-22IN-24IN-26IN-28IN-30L2-1Group 0Group 1L1L2AC INPUTST 0 1 2 3 4 5 6 71ST 8 9 01 1 1ST 6 7 82 2 2ST 4 5 61119271220281321291422301 O5K2331Attribute1756-IA32Inputs32 diagnostic (4 points/group)Voltage category120V ACOperating voltage range74 132V AC,47 63 HzInput voltage, nom120V ACInput delay timeOFF to ONON to OFFHardware delay: 1.5 ms nom/10 ms max filter timeUser-selectable filter time: 1 or 2 msHardware delay: 1 ms nom/8 ms max filter timeUser-selectable filter time: 9 or 18 msCurrent draw @ 5.1V165 mACurrent draw @ 24V2 mAPower dissipation, max6.1 W @ 60 C (140 F)Thermal dissipation20.8 BTU/hrOff-state voltage, max20VOff-state current, max2.5 mAOn-state current, min5 mA @ 74V ACOn-state current, max15 mA @ 132V ACInrush current, max390 mAInput impedance, max14.0 kΩ @ 132V AC, 60 HzRockwell Automation Publication 1756-TD002C-EN-E - September 201015
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules SpecificationsAttribute1756-IA32Cyclic update time200 μs.750 msIsolation voltage250V (continuous), basic insulation type, inputs-tobackplane125V (continuous), basic insulation type, input group-togroupNo isolation between individual group inputsRoutine tested @ 1350V AC for 2 sRemovable terminal block housing1756-TBCH1756-TBS6HSlot width1Wire size0.33. 2.1 mm2 (22.14 AWG) solid or stranded copperwire rated at 90 C (194 F), or greater, 1.2 mm (3/64 in.)insulation max(1)Wire category1(2)North American temperature codeT4AEnclosure typeNone (open-style)(1) Maximum wire size requires extended housing, catalog number 1756-TBE.(2) Use this conductor category information for planning conductor routing as described in the system-levelinstallation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.Attribute1756-IA32Temperature, operatingIEC 60068-2-1 (Test Ad, Operating Cold),IEC 60068-2-2 (Test Bd, Operating Dry Heat),IEC 60068-2-14 (Test Nb, Operating Thermal Shock)0 60 C (32 140 F)Temperature, surrounding air60 C (140 F)Temperature, storageIEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)-40 85 C (-40 185 F)Relative humidityIEC 60068-2-30 (Test Db, Unpackaged Nonoperating Damp Heat)5 95% noncondensingVibrationIEC 60068-2-6 (Test Fc, Operating)2 g @ 10 500 HzShock, operatingIEC 60068-2-27 (Test Ea, Unpackaged Shock)30 gShock, nonoperatingIEC 60068-2-27 (Test Ea, Unpackaged Shock)50 gEmissionsCISPR 11: Group 1, Class AESD immunityIEC 61000-4-26 kV contact discharges8 kV air dischargesRadiated RF immunityIEC 61000-4-310V/m with 1 kHz sine-wave 80% AM from 80. 2000 MHz10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz3V/m with 1 kHz sine-wave 80% AM from 2000.2700 MHzEFT/B immunityIEC 61000-4-4 4 kV at 5 kHz on signal portsSurge transient immunityIEC 61000-4-5 1 kV line-line (DM) and 2 kV line-earth (CM) on signal portsConducted RF immunityIEC 61000-4-610Vrms with 1 kHz sine-wave 80% AM from 150 kHz.80 MHz16Rockwell Automation Publication 1756-TD002C-EN-E - September 2010
6 / 2011www.klinkmann.comCertification(1)1756 ControlLogix I/O Modules Specifications1756-IA32ULUL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.CSACSA Certified Process Control Equipment. See CSA File LR54689C.CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA FileLR69960C.CEEuropean Union 2004/108/IEC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)European Union 2006/95/EC LVD, compliant with: EN 61131-2; Programmable Controllers (Clause 11)C-TickAustralian Radiocommunications Act, compliant with:AS/NZS CISPR 11; Industrial Emissions(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.Rockwell Automation Publication 1756-TD002C-EN-E - September 201017
6 / 2011www.klinkmann.com1756 ControlLogix I/O Modules Specifications1756-IB16ControlLogix DC (10.31.2V) input module1756-IB16Simplified Schematic 5V? ? ? ? ? ? ? ? ? ? ?IN-0IN-1IN-0Group 0IN-2IN-3GND-0Daisy Chainto nterfaceDisplayGND-0GND-0IN-9IN-8IN-10IN-11Group 1Group 0IN-12IN-13IN-15Group 1IN14GND-1GND-1- DC COMDC INPUTST 0 1 2 3 4 5 6 7 OST 8 9 10 11 12 13 14 15KAttribute1756-IB16Inputs16 (8 points/group)Voltage category12/24V DC sinkOperating voltage range10.31.2V DCInput voltage, nom24V DCInput delay timeOFF to ONON to OFF18Hardware delay: 290 μs nom/1 ms max filter timeUser-selectable filter time: 0, 1, or
1756 ControlLogix I/O Modules Specifications . connect all field-side wiring. RTBs and IFMs are not included with the I/O modules. They must be ordered separately. . AC digital 1756-IA8D 1756-IA16 1756-IA16I 1756-IA32 1756-IM16I 1756-IN16 6 9 12 15 70 73 1756-OA8 1756-OA8D 1756-OA8E 1756-OA16 1756-OA
esencia wellness 20 espÍritu spa 21 one&only palmilla spa 22 se spa 23 spa at esperanza 24 spa marquis 25 the spa at las ventanas 26 the spa viceroy los cabos 27 waldorf astoria spa 28 campeche hol-be spa hacienda puerta campeche 30 hol-be spa hacienda uayamÓn 31 .
nero giardini nestlÈ italiana spa oikos spa pac 2000 a scarl pasta julia spa pavimenti scalabrini perrone luigi sas podella paste alimentari polipack srl progetto contract spa reforme sa roberto abate spa romagnoli spa rossi spa s.n.t. messaggerie srl saba italia spa safab spa seas spa sg
World Class Spa Standard Process, Ministry of Public Health, Thailand Thai Spa Excellence Quality Standard, Thai Spa Association Star Rating System, Ministry of Tourism and Spa Associations of Malaysia Spa Accreditation Program, Spa Association of Singapore Association of South East Asian Nations, Spa Standards (2015)
Prakarya dan Kewirausahaan Kelas VII SMP/MTs Semester 1 SMP/MTs KELAS VII SEMESTER 1 ISBN: 978-602-427-031-5 (jilid lengkap) 978-602-427-032-2 (jilid 1a) HET ZONA 1 ZONA 2 ZONA 3 ZONA 4 ZONA 5 Rp18.100 Rp18.900 Rp19.600 Rp21.200 Rp27.200 Prakarya Mata pelajaran prakarya terdiri dari aspek Kerajinan, Rekayasa, Budidaya dan Pengolahan.
978-602-282-973-7 (jilid 1) Buku Guru Bahasa Indonesia Kelas VII SMP/MTs Buku Guru Bahasa Indonesia SMP/MTs KELAS VII HET ZONA 1 ZONA 2 ZONA 3 ZONA 4 ZONA 5 Rp11.000 Rp11.400 Rp11.900 Rp12.800 Rp16.400 KEME
buku guru matematika kelas xi sma/ma/smk/mak sma/ma/ smk/mak kelas xi kementerian pendidikan dan kebudayaan republik indonesia 2017 het zona 1 zona 2 zona 3 zona 4 zona 5 rp17.100 rp17.800 rp18.5
978-602-282-861-7 (jilid 4) Buku Guru Pendidikan Agama Buddha dan Budi Pekerti Kelas IV SD Buku Guru Pendidikan Agama Buddha dan Budi Pekerti SD KELAS IV HET ZONA 1 ZONA 2 ZONA 3 ZONA 4 ZONA 5 Rp15,100 Rp15,700 Rp16,400 Rp17,600 Rp22,600 KEME
4 Spa Tempe87rature Spa Heating Set Point 87 Spa Filter Pump Heater Spa Pump On/Off: Tap this button to switch the spa filter pump on or off and to activate the heater; if a heater source is selected.See Spa Heater button. Note: The heater will activate when the pool pump is on and the temperature Set Po
