FS And FD Cast Hub Device Boxes

FS and FD Cast Hub Device BoxesUNILETS for use with Threaded Rigid Conduit and IMC. All Device Boxes have Ridge Top Construction. Furnished with Internal Ground Screw.Applications Accommodate wiring devices such as switches andreceptacles. Provide excellent service in areas where boxes are subject torough usage. Serve as pull boxes for conductors. Permit access to conductors for maintenance. Provide openings for making splices. Allow connections for branch conduit runs. Blank bodies for special conduit entrance arrangements.FittingsNEC/CEC Cast Device BoxesFeatures Corrosion-resistant — ideal for indoor and outdoor installations. Weatherproof, raintight and dust-tight when used with castgasketed covers. FS and FD boxes take standard flush wiring devices. FD boxes take devices exceeding 41.4 mm (1.63 in) in depthunder fastening ears. Malleable iron for high tensile strength and ductility — providesgreater resistance to impact and shock. Both malleable iron and aluminum boxes have ridge topconstruction for positive cover/gasket/box fit. Accurately tapped, tapered threads for tight, rigid joints, groundcontinuity. Complete selection of covers, receptacles, plugs, gaskets andaccessories. Covers have captive stainless steel screws to speed installation,prevents loss of screws. Internal grounding screws standard. Available in single, two and three gang and tandem. Smooth, rounded integral bushing in each hub protectsconductor insulation.Illustrated FeaturesGasket is designed so that it wraps around ridge topof Appleton aluminum or malleable iron device box.Result is a positive seal against moisture.Standard Materials Boxes: malleable iron or copperfree (4/10 of 1% max.)aluminum Covers: malleable iron, steel, or copperfree (4/10 of 1% max.)aluminum Screws: stainless steel Gaskets: neopreneStandard Finishes Malleable iron boxes and covers: triple-coat — (1) zincelectroplate, (2) chromate, and (3) epoxy powder coat Aluminum boxes and covers: epoxy powder coat Steel covers: zinc electroplateGasket construction.Cover tightens on largest perimeter ofgasket and fits snugly against portion ofgasket that wraps around ridge top of box.NEC/CEC Certifications and Compliances 60UL Standard: 514AUL Listed: E2527CSA Standard: C22.2 No. 18.1CSA Certified: 001472NEMA Standard: FB-1Visit our website at www.appletonelec.com or contact us at (800) 621-1506. November 2015

FS and FD Single Gang Cast Hub Device BoxesUNILETS for use with Threaded Rigid Metal Conduit and IMC. Furnished with Internal Ground Screw.FS Box (Shallow) 2.00” deep, FD Box (Deep) 2.69” deepTypeFSFDFDCFDSFSLADeepShallowDeepMalleable Iron Ridge TopAluminum Ridge FS-1-100-A1/2FD-1-50FD-1-50-A1/2FD-1-50ED FD-1-50-AED 3/4FD-1-75FD-1-75-A3/4FD-1-75ED FD-1-75-AED 00FSC-1-100-A1/2FDC-1-50FDC-1-50-A1/2FDC-1-50ED FDC-1-50-AED3/4FDC-1-75FDC-1-75-A3/4FDC-1-75ED FDC-1-75-AED 1FDC-1-100FDC-1-100-A1FDC-1-100ED FDC-1-100-AED 100-A1/2FSLA-1-50FittingsFSSShallowCatalog NumberNEC/CEC Cast Device BoxesFSCDepthTrade Size(Inches)ShallowDeepShallow— Extra deep with mounting feet.Visit our website at www.appletonelec.com or contact us at (800) 621-1506. November 201561

FS and FD Single Gang Cast Hub Device BoxesUNILETS for use with Threaded Rigid Metal Conduit and IMC. FS Box 2.00” Deep, FD Box 2.69” Deep. Furnished with Internal Ground Screw.FS Box (Shallow) 2.00” deep, FD Box (Deep) 2.69”deepCatalog NumberTypeDepthFSCAShallowFSCCFDCCShallowDeepHub Size(Inches)NEC/CEC Cast Device 50A1/2FDCC-1-50ED 3/4FDCC-1-753/4FDCC-1-75ED -75A—1/2FDCT-1-501/2FDCT-1-50ED FDCT-1-753/4——FDCT-1-75AFDCT-1-75ED FDCT-1-100—11FDCT-1-100ED X-1-75—1/2FDX-1-50—1/2FDX-1-50ED FDX-1-75—3/4—FDX-1-75ED —FDCC-1-75-A3/43/4FSCD—1/23/4FSTAluminumRidge Top1/21FSCTMalleable IronRidge Top Extra deep with mounting feet.62Visit our website at www.appletonelec.com or contact us at (800) 621-1506. November 2015

FS and FD Single Gang and Tandem Cast Hub Device BoxesUNILETS for use with Threaded Rigid Metal Conduit and IMC. FS Box 2.00” Deep, FD Box 2.69” Deep. Furnished with Internal Ground Screw.FS Box (Shallow) 2.00” deep, FD Box (Deep) 2.69” deepTypeDepthHub Size(Inches)Catalog NumberMalleable IronAluminumRidge TopRidge TopFS and FD Single Gang Boxes with Mounting EC Cast Device BoxesFS Single Gang Boxes with Double Opening3.38”FS-1D-75A3.38”FSFSCFSVisit our website at www.appletonelec.com or contact us at (800) 621-1506. November 2015FittingsFS Two-Gang Tandem Boxes —Takes single gang coversShallowShallow1" Extension63

FS and FD Single Gang and Tandem Cast Hub Device Box CoversSteel Covers and Aluminum Covers for Ridge Top Boxes. Furnished with Stainless Steel Screws, Less Gasket.Catalog NumberSteelAluminumFittingsNEC/CEC Cast Device BoxesDescriptionFor double push button switches, momentary contact andmaintain switches.FSK-1PBFor square handle tumbler or toggle switches.FSK-1TSFor square handle tumbler or toggle switches.Has toggle guard.FSK-1TSG—For two or three interchangeable devices.Includes mounting bracket.FSK-1WD-3—For round flush receptacles, without lift cover.Mounts on device.Hole Dia.—1-13/32”.FSK-1R-QFSK-1R-Q-AFor round flush receptacles, with lift cover.Mounts on device.Hole Dia.—1-13/32”.FSK-1R-T—For round receptacles.Mounts directly on box.Hole Dia.—1-13/32”.FSK-1R-WFSK-1R-W-AFor round receptacles.Mounts directly on box.Hole Dia.—1-5/8”.3-9/32” C to C screw holes.FSK-1R-X—For round receptacles.Mounts on device.Hole Dia.—1-5/8”.2-3/8” C to C screw holes.FSK-1R-YFSK-1R-Y-AFor standard 2 or 3 wire duplex receptacles.FSK-1DRFSK-1DR-A—FSK-1TS-AFor pilot lamp:64Red JewelFSK-1J—Amber JewelFSK-1JA—Green JewelFSK-1JG—Opal JewelFSK-1JO—BlankFSK-1BFSK-1B-AVisit our website at www.appletonelec.com or contact us at (800) 621-1506. November 2015

FS and FD Single Gang and Tandem Cast Hub Device Box CoversCovers for Ridge Top Boxes.DescriptionCatalog NumberMalleable IronAluminumCast Covers NEMA 3R Wet Locations — Furnished with gasket and stainless steel screwsReceptacle cover with spring cover.Hole Diameter — 1-7/16”FSK-1VRFSK-1VR-AFor duplex flush receptacle with spring coverFSK-1VDRFSK-1VDR-AFor pilot lamp flush receptacles:Red JewelFSK-1J-CFSK-1-JCAOpal JewelFSK-1JOCFSK-1JOCAAmber JewelFSK-1JACFSK-1JACAGreen JewelFSK-1JGCFSK-1JGCAFor double push button switchesFSK-1PBSFor external operation of tumbler switches with square handlesFSK-1VTSFSK-1VTSAOperating type for square handle tumbler or toggle switchesFSK-1VSFSK-1VS-ARocker type for square handle tumbler or toggle flush /CEC Cast Device BoxesFittingsGasket — ReplacementFS-GKR-1NNeoprene—for use with wet location coversCast Covers Dry Locations — Furnished with stainless steel screws less gasketFor standard 2 or 3 wire duplex receptaclesFSK-1DR-C—For round flush receptaclesHole Dia. — 1-7/16”FSK-1R-Z—For square handle toggle switchesFSK-1TS-C—For square handle toggle switches; Has toggle guardFSK-1TSG-CVisit our website at www.appletonelec.com or contact us at (800) 621-1506. November 2015FSK-1TSG-CA65

FS and FD Single Gang and Tandem Cast Hub Device Box Wiring Capacity andDimensionsWiring CapacityCapacity — dm3 (in3)Single-GangFDSingle-GangFSHub Size(inches)Two-Gang TandemFS1/20.29 (18.00)0.41 (25.00)0.66 (40.00)3/40.29 (18.00)0.41 (25.00)0.66 (40.00)10.29 (18.00)0.41 (25.00)0.66 (40.00)Dimensions in Millimeters (Inches)NEC/CEC Cast Device BoxesFS and FD Single Gang Boxes without lugsFS Tandem BoxesFittingsFS and FD Single Gang Boxes with lugsHubSize(Inches)1/266AB149.4 (5.88) 28.7 (1.13)C16.0 (0.63)Dimensions in Millimeters (Inches)DE“FS”“FD”50.8 (2.00)68.3 (2.69)38.1 (1.50)GF“FS”“FD”H88.9 (3.50)45.2 (1.78)62.0 (2.44)42.9 (1.69)3/4149.4 (5.88) 35.1 (1.38)19.1 (0.75)50.8 (2.00)68.3 (2.69)52.3 (2.06)88.9 (3.50)45.2 (1.78)62.0 (2.44)38.1 (1.50)1160.3 (6.31) 42.9 (1.69)23.9 (0.94)50.8 (2.00)68.3 (2.69)52.3 (2.06)88.9 (3.50)45.2 (1.78)62.0 (2.44)35.1 (1.38)Visit our website at www.appletonelec.com or contact us at (800) 621-1506. November 2015

Wet Location Receptacle CoversAvailable with NEMA Configuration Receptacles or as Covers OnlyCovers also accommodate Toggle Switches.Applications Meet NEC 406.8(B) and CEC receptacle requirements for wetlocations: “A receptacle installed outdoors where exposed toweather or in other wet locations shall be in a weatherproofenclosure, the integrity of which is not affected when thereceptacle is in use (attachment plug cap inserted).” For industrial, commercial or residential use as a generalpurpose receptacle or for powering portable equipment notexceeding medium duty ratings. Mounts on FS or FD device boxes or equivalents, either singlegang or multiple gang with single gang openings.FeaturesDuplex Cover on FS Box.Single Cover on FS Box. Diecast copperfree cover assemblies with epoxy powder coat(electrostatically applied for uniform coverage) to provideprotection against corrosion. Positive ground path assured for all exposed metal parts. Receptacle interiors grounded through an extra contact in alltypes. Self-grounded in duplex units.Standard Materials Cover and faceplate: diecast copperfree (4/10 of 1%) aluminumGaskets: ethylene propylene rubber (EPDM)Cover and device screws: stainless steel, 6—32 threadHinge springs: stainless steelHinge shaft: nylonFSK-SBA adapter: steel plate with closed cell spongedneoprene gasketStandard Finishes Cover and faceplate: epoxy powder coat FSK-SBA adapter: zinc electroplateNEC Certifications and Compliances UL Standard: 514A UL Listed: E2527, E3439 NEMA Standards: FB-1, OS-1FittingsIllustrated FeaturesTypical application with NEMA configuration receptacle and plug, mountedon an FS box. Gasket seals around plug,keeping out moisture and dirt. Spring door closes automaticallywhen plug is withdrawn to protect receptacle.Visit our website at www.appletonelec.com or contact us at (800) 621-1506. November 2015NEC/CEC Cast Device Boxes Provides full protection in damp or wet locations per NEC406.8(B) and CEC. Gasketed spring door cover closes tightlyautomatically to protect receptacle from moisture and dirt whennot in use. With plug inserted, a heavy-duty gasket in throat ofreceptacle seals around it to keep out moisture and dirt. Receptacle interiors comply with NEMA Standards WD-1 andWD-5. Receptacle interiors are specification grade, back and sidewired. Single cover units accommodate NEMA configurationreceptacles for locking or non-locking blade plugs, or toggleswitches. Duplex units accommodate one receptacle and onetoggle switch or any combination of the two. Covers open all the way, permitting easy plug insertion andwithdrawal. Also permits adequate access to cover screws foreasy attachment of cover to FS, FD or other device box. Largehead cover screws are captivated. Unique design of spring door hinge provides smooth action.Duplex units have a separate hinge shaft for each spring doorcover to reduce stress on the shafts. Spring door cover puts pressure on plug (without tilting plug) tohold plug in best position for providing optimum weatherproofseal. Stainless steel hinge springs are completely enclosed — insideand out — for superior resistance against corrosion. EPDM gaskets provide superior resistance to the weather,ozone and temperatures between -45.6 C and 126.7 C(-50.08 F and 260 F).Spring doors open wide for easy plug insertion and cover assembly (coversshown in open position for illustration only).This view shows gaskets that protect plugs. Gasket on bottom of coverprevents entry of moisture into device box (see gasket description).67