71535-00001.CINSTRUCTION MANUALSGVL/G2/G3 with LV and SV Series Actuators1Signal DirectionAAB AABBA2AB345163214mm02/13 - Subject to change. Belimo Aircontrols (USA), Inc.4 mm214225Nm3!!28711Adaption212
INSTRUCTION MANUALSGVL/G2/G3 with LVK and SVK Series Actuators1Signal DirectionAAB AABBA2AB3541614 mm24mmSUBJECT TO CHANGE. BELIMO AIRCONTROLS (USA), INC.215Nm23!!2781Adaption2M1800-543-9038 USA2866-805-7089 CANADA203-791-8396 LATIN AMERICA/CARIBBEAN
INSTRUCTION MANUALWGVL/G6/G7 with EV and RV Series Actuators1Signal DirectionAAB AABBA2AB43511236215mm25 NmSUBJECT TO CHANGE. BELIMO AIRCONTROLS (USA), INC.2843!!2Adaption712211800-543-9038 USA5 Nm5mm866-805-7089 CANADA203-791-8396 LATIN AMERICA/CARIBBEAN3
INSTRUCTION MANUALWGVL/G6/G7 with AVK Series Actuators1Signal DirectionAAB AABBA2AB435121615mm25 Nm243SUBJECT TO CHANGE. BELIMO AIRCONTROLS (USA), INC.28!2!Adaption7M211800-543-9038 USA45 Nm5 mm866-805-7089 CANADA203-791-8396 LATIN AMERICA/CARIBBEAN
INSTRUCTION MANUALUGVL Linkage with LV and SV Series ActuatorsNo threads21Style 3212LV.SV.9Nm4 mmoptionalInstall groovedside down1 x UNF 3/8“ -24Style 5Style 3Style 1, 2, 4Threaded1 x UNF 1/4“ - 281 x UNF 1/4“ - 323Style B1 x M101 x M8UGVL.Style A1 x M6SUBJECT TO CHANGE. BELIMO AIRCONTROLS (USA), INC.2x54800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA/CARIBBEAN5
INSTRUCTION MANUALUGVL Linkage with LV and SV Series Actuators76ABS4mm125Nm8Signal directiona)AAB AABB8aAAB8b1SUBJECT TO CHANGE. BELIMO AIRCONTROLS (USA), INC.b)14mm4mm2323720 720 3322800-543-9038 USA6866-805-7089 CANADA203-791-8396 LATIN AMERICA/CARIBBEAN
INSTRUCTION MANUALUGVL Linkage with LV and SV Series Actuators9a9bValve StemMUST be UpValve StemMUST be DownSUBJECT TO CHANGE. BELIMO AIRCONTROLS (USA), INC.10a10b11a11b3 Adaption3 Adaption11225 Nm24 mm25Nm800-543-9038 USA866-805-7089 CANADA4mm203-791-8396 LATIN AMERICA/CARIBBEAN7
INSTRUCTION MANUALUGVL Linkage with LVK and SVK Series ActuatorsNo threads21Style 3212LVK.SVK.9Nm4 mmoptionalInstall groovedside downStyle 5Style 3Style 1, 2, 41 x UNF 3/8“ -24Threaded1 x UNF 1/4“ - 281 x UNF 1/4“ - 323Style B1 x M101 x M8UGVL.Style A1 x M654800-543-9038 USA8SUBJECT TO CHANGE. BELIMO AIRCONTROLS (USA), INC.2x866-805-7089 CANADA203-791-8396 LATIN AMERICA/CARIBBEAN
INSTRUCTION MANUALUGVL Linkage with LVK and SVK Series Actuators76ABS4mm125Nm8Signal directiona)AAB AABBSUBJECT TO CHANGE. BELIMO AIRCONTROLS (USA), INC.b)AAB8a8b114mm4mm2323720 720 3322800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA/CARIBBEAN9
INSTRUCTION MANUALUGVL Linkage with LVK and SVK Series Actuators9a9bValve StemMUST be UpValve StemMUST be Down10b311a11bAdaption3Adaption112225 Nm800-543-9038 USA1024 mm5Nm866-805-7089 CANADA4mm203-791-8396 LATIN AMERICA/CARIBBEANSUBJECT TO CHANGE. BELIMO AIRCONTROLS (USA), INC.10a
INSTRUCTION MANUALLV and SV Series ActuatorsWIRING DIAGRAMSNon-Spring Return Actuator with -3 and -SR24 VAC Transformer23Blk (1) CommonLineVolts24 VAC Transformer18Red (2) 2LineVolts3Blk (1)CommonRed (2) LineBlk (1) CommonVolts(–)Wht (3)Wht (3) 324 VAC Transformer18Control Signal( )VDC/mA Ω500 ΩRed (2) Hot18Wht (3)Y Input, 2 to 10VOrg (5)U Output, 2 to 10V7(–)2 to 10 VDCFeedback Signal ( )5On/OffFloating PointA2Blu (1) Common –Hot H L2Line N L1Brn (2) A2100 to 240 VAC100 to 240 VACLine N L1VDC / 4 to 20 mABlu (1) CommonBrn (2) Hot H L2Wht (3) Floating Point24 VAC Transformer (AC only)24 VAC Transformer (AC only)LineVolts2HotCom2HotBlk (1) – CommonComBlk (1) – CommonRed (2) HotRed (2) HotWht (3) Y1 InputControllerWht (3) Y1 InputControllerTriac SourceORGOrangeAnaranjadoOrangeAlaranjadoTriac SinkNon-Spring Return Actuator with MFT24 VAC Transformer3Red (2) HotBlkLineBlk (1) CommonLineVoltsVolts2 to 10 VDCFeedback Signal ( )Org (5) U Output1810Notes:Meets cULus requirements without the need of anelectrical ground connection(1) – CommonRed (2) HotAWht (3) Y Input(–)224 VAC Transformer18Wht (3) Y1 InputAActuators with appliance cables are numbered.Org (5) U Output 2 to 10V2Actuators may be connected in parallel. Powerconsumption and input impedance must be observed.3Actuators may also be powered by 24 VDC.5Only connect common to neg. (-) leg of control circuits.7A 500 resistor converts the 4 to 20 mA control signalto 2 to 10 VDC.8Control signal may be pulsed from either the Hot(Source) or Common (Sink) 24 VAC line.9Contact closures A & B also can be triacs. A & B shouldboth be closed for the triac source and open for triacsink.10For triac sink the Common connection from the actuatormust be connected to the Hot connection of thecontroller. Position feedback cannot be used with a triacsink controller. The actuator internal common referenceis not compatible.12IN4004 or IN4007 diode. (IN4007 supplied, Belimo Partnumber 40155)18Actuators with plenum rated cable do not have numberson wires; use color codes instead.B8(–)2 to 10 VDC( )Feedback Signal129PNKPinkRosadoRosaCor-de nBrunMarromWht (3) B 18Floating Point324 VAC Transformer1824 VAC Transformer (AC Only)VoltsVoltsABRed (2) HotΩ500 ΩΩ 1/4watt(–)Control Signal( )VDC/mAWht (3) Y1 Input, 2 to 10V718Blk (1) CommonLineBlk (1) CommonLine(–)Control Signal( )VDC/mAA7C500 Ω1/4 wattRed (2) HotWht (3) Y1 Input, 2 to 10VOrg (5)Org (5) U Output, 2 to l mode acc. to Y* Default selectable 0-100%. See Configuration Data Sheet.** Customizable. See Configuration Data Sheet.VDC / 4 to 20 mABLKBlackNegroNoirPretoOn/OffB oDirection of rotation switchOverride Control Min, Mid, Max Postions800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA/CARIBBEAN11
INSTRUCTION MANUALLVK and SVK Series ActuatorsWIRING DIAGRAMSElectronic Fail-Safe Actuator with -3 and -SR224 VAC Transformer3324 VAC Transformer1818LineBlk (1) Common –LineVoltsBlk (1) CommonVoltsΩ500 ΩRed (2) Hot(–)Control Signal( )VDC/mARed (2) Hot18Wht (3)Y Input, 2 to 10VOrg (5)U Output, 2 to 10V7Wht (3) Y1 input(–)2 to 10 VDCFeedback Signal ( )Pnk (4)5On/OffFloating PointA2100 to 240 VACLine N L1Blu (1)Hot H L2Brn (2) VDC / 4 to 20 mAA100 to 240 VACBlu (1)Line N L1Hot H L2Brn (2) Wht (3) Wht (4) Wht (3) Floating Point24 VAC Transformer24 VAC Transformer24 VAC Transformer24 VAC 1818Com10VoltsBlk (1) CommonBlk (1) CommonRed (2) HotWht (3) Y1 InputRed (2) HotWht (3) Y1 InputLine18Blk (1) CommonHotComRed (2) HotWht (3) Y1 InputPnk (4) Y2 rromWht (4)Pnk (4) Y2 InputPnk (4) Y2 InputControllerControllerTriac Sink with Separate TransformerElectronic Fail-Safe Actuator with MFT3Blk (1) CommonLineVoltsRed (2) HotBlkLineVolts2 to 10 VDCFeedback Signal ( )Org (5) U Output1810Notes:(1) – CommonMeets cULus requirements without the need of anelectrical ground connectionRed (2) HotAWht (3) Y Input(–)224 VAC Transformer18Wht (3) Y1 InputB8(–)2 to 10 VDC( )Feedback SignalAActuators with appliance cables are numbered.2Actuators may be connected in parallel. Powerconsumption and input impedance must be observed.3Actuators may also be powered by 24 VDC.5Only connect common to neg. (-) leg of control circuits.7A 500 resistor converts the 4 to 20 mA control signalto 2 to 10 VDC.8Control signal may be pulsed from either the Hot(Source) or Common (Sink) 24 VAC line.9Contact closures A & B also can be triacs. A & B shouldboth be closed for the triac source and open for triacsink.10For triac sink the Common connection from the actuatormust be connected to the Hot connection of thecontroller. Position feedback cannot be used with a triacsink controller. The actuator internal common referenceis not compatible.12IN4004 or IN4007 diode. (IN4007 supplied, Belimo Partnumber 40155)18Actuators with plenum rated cable do not have numberson wires; use color codes instead.129Org (5) U Output 2 to 10VB 18AOn/OffB 18Floating Point24 VAC Transformer318Volts1824 VAC Transformer (AC Only)Blk (1) CommonLineBlk (1) CommonLine(–)Control Signal( )VDC/mAAVoltsABRed (2) HotΩ500 ΩΩ 1/4watt(–)Control Signal( )VDC/mAWht (3) Y1 Input, 2 to 10V77C500 Ω1/4 wattRed (2) HotWht (3) Y1 Input, 2 to 10VOrg (5)Org (5) U Output, 2 to l mode acc. to Y* Default selectable 0-100%. See Configuration Data Sheet.** Customizable. See Configuration Data Sheet.VDC / 4 to 20 mAOverride Control Min, Mid, Max Postions800-543-9038 USA12BLKBlackNegroNoirPretoDirection of rotation switchPNKPinkRosadoRosaCor-de ros24 VAC TransformerWHTWhiteBlancoBlancBrancoTriac SourceREDRedRojoRougeVermelhoTriac 66-805-7089 CANADA203-791-8396 LATIN AMERICA/CARIBBEAN
INSTRUCTION MANUALEV Series ActuatorsWIRING DIAGRAMSNon-Spring Return Actuator with -324 VAC Transformer23Blk (1) CommonLineVolts24 VAC Transformer18Red (2) 2LineVolts3Blk (1)CommonRed (2) LineBlk (1) CommonVolts(–)Wht (3)Wht (3) 324 VAC Transformer18Control Signal( )VDC/mA Ω500 ΩRed (2) Hot18Wht (3)Y Input, 2 to 10VOrg (5)U Output, 2 to 10V7(–)2 to 10 VDCFeedback Signal ( )5On/OffFloating PointA2Blu (1) Common –Hot H L2Line N L1Brn (2) A2100 to 240 VAC100 to 240 VACLine N L1VDC / 4 to 20 mABlu (1) CommonBrn (2) Hot H L2Wht (3) Floating Point24 VAC Transformer (AC only)24 VAC Transformer (AC only)LineVolts2Com2HotBlk (1) – CommonComBlk (1) – CommonRed (2) HotRed (2) HotWht (3) Y1 InputWht (3) Y1 InputControllerTriac SourceORGOrangeAnaranjadoOrangeAlaranjadoTriac SinkNon-Spring Return Actuator with MFT24 VAC Transformer3Blk (1) CommonLineVoltsRed (2) HotBlkLineVolts2 to 10 VDCFeedback Signal ( )Org (5) U Output1810Notes:(1) – CommonMeets cULus requirements without the need of anelectrical ground connectionRed (2) HotAWht (3) Y Input(–)224 VAC Transformer18Wht (3) Y1 InputAActuators with appliance cables are numbered.Org (5) U Output 2 to 10V2Actuators may be connected in parallel. Powerconsumption and input impedance must be observed.3Actuators may also be powered by 24 VDC.5Only connect common to neg. (-) leg of control circuits.7A 500 resistor converts the 4 to 20 mA control signalto 2 to 10 VDC.8Control signal may be pulsed from either the Hot(Source) or Common (Sink) 24 VAC line.9Contact closures A & B also can be triacs. A & B shouldboth be closed for the triac source and open for triacsink.10For triac sink the Common connection from the actuatormust be connected to the Hot connection of thecontroller. Position feedback cannot be used with a triacsink controller. The actuator internal common referenceis not compatible.12IN4004 or IN4007 diode. (IN4007 supplied, Belimo Partnumber 40155)18Actuators with plenum rated cable do not have numberson wires; use color codes instead.B8(–)2 to 10 VDC( )Feedback Signal129Direction of rotation switchAOn/OffB 18AFloating Point324 VAC Transformer1824 VAC Transformer (AC Only)VoltsVoltsABRed (2) HotΩ500 ΩΩ 1/4watt(–)Control Signal( )VDC/mAWht (3) Y1 Input, 2 to 10V718Blk (1) CommonLineBlk (1) CommonLine(–)Control Signal( )VDC/mAB 187PNKPinkRosadoRosaCor-de rosControllerC500 Ω1/4 wattWHTWhiteBlancoBlancBrancoHotRed (2) HotWht (3) Y1 Input, 2 to 10VOrg AzulOn/OffBRNBrownMarronBrunMarromWht (3) Org (5) U Output, 2 to 10VFunctionsMid*Max*Normal**abc0%50%100%Control mode acc. to Y* Default selectable 0-100%. See Configuration Data Sheet.** Customizable. See Configuration Data Sheet.VDC / 4 to 20 mABLKBlackNegroNoirPretoMin*Override Control Min, Mid, Max Postions800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA/CARIBBEAN13
INSTRUCTION MANUALRV Series ActuatorsWIRING DIAGRAMSNon-Spring Return Actuator with -324 VAC Transformer3Blk (1) CommonLineVoltsRed (2) HotBlkLineVolts2 to 10 VDCFeedback Signal ( )Org (5) U Output1810(1) – CommonRed (2) HotAWht (3) Y Input(–)224 VAC Transformer18Wht (3) Y1 InputB8(–)2 to 10 VDC( )Feedback Signal129Org (5) U Output 2 to 10VDirection of rotation switchAOn/OffB 18B 18AFloating PointNon-Spring Return Actuator with MFTRed (2) HotBlkLineVoltsOrg (5) U OutputNotes:(1) – CommonMeets cULus requirements without the need of anelectrical ground connectionRed (2) HotAWht (3) Y Input(–)2 to 10 VDCFeedback Signal ( )1810Wht (3) Y1 InputB8(–)2 to 10 VDC( )Feedback Signal1292Actuators may be connected in parallel. Powerconsumption and input impedance must be observed.3Actuators may also be powered by 24 VDC.7A 500 resistor converts the 4 to 20 mA control signalto 2 to 10 VDC.8Control signal may be pulsed from either the Hot(Source) or Common (Sink) 24 VAC line.9Contact closures A & B also can be triacs. A & B shouldboth be closed for the triac source and open for triacsink.10For triac sink the Common connection from the actuatormust be connected to the Hot connection of thecontroller. Position feedback cannot be used with a triacsink controller. The actuator internal common referenceis not compatible.12IN4004 or IN4007 diode. (IN4007 supplied, Belimo Partnumber 40155)18Actuators with plenum rated cable do not have numberson wires; use color codes instead.Org (5) U Output 2 to 10VDirection of rotation switchAFloating Point24 VAC Transformer318Volts1824 VAC Transformer (AC Only)Blk (1) CommonLineBlk (1) CommonLine(–)Control Signal( )VDC/mAB 18AVoltsABRed (2) HotΩ500 ΩΩ 1/4watt(–)Control Signal( )VDC/mAWht (3) Y1 Input, 2 to 10V77C500 Ω1/4 wattRed (2) HotWht (3) Y1 Input, 2 to 10VOrg (5)Org (5) U Output, 2 to l mode acc. to Y* Default selectable 0-100%. See Configuration Data Sheet.** Customizable. See Configuration Data Sheet.Override Control Min, Mid, Max lhoWHTWhiteBlancoBlancBrancoVDC / 4 to 20 mAPNKPinkRosadoRosaCor-de rosOn/OffB 18BRNBrownMarronBrunMarromBlk (1) CommonLineVolts224 VAC doOrangeAlaranjado24 VAC Transformer800-543-9038 USA14866-805-7089 CANADA203-791-8396 LATIN AMERICA/CARIBBEAN
INSTRUCTION MANUALAVK Series ActuatorsWIRING DIAGRAMSElectronic Fail-Safe Actuator with -3224 VAC Transformer3324 VAC Transformer1818LineBlk (1) Common –LineVoltsBlk (1) CommonVoltsΩ500 ΩRed (2) Hot(–)Control Signal( )VDC/mARed (2) Hot18Wht (3)Y Input, 2 to 10VOrg (5)U Output, 2 to 10V7Wht (3) Y1 input(–)2 to 10 VDCFeedback Signal ( )Pnk (4)5On/OffFloating PointA2100 to 240 VACLine N L1A100 to 240 VACBlu (1)Blu (1)Line N L1Brn (2) Hot H L2VDC / 4 to 20 mAHot H L2Brn (2) Wht (3) Wht (4) Wht (3) Floating Point24 VAC Transformer24 VAC Transformer24 VAC Transformer24 VAC 1818Com10VoltsBlk (1) CommonBlk (1) CommonRed (2) HotWht (3) Y1 InputRed (2) HotWht (3) Y1 InputLine18Blk (1) CommonHotComRed (2) HotWht (3) Y1 InputPnk (4) Y2 rromWht (4)Pnk (4) Y2 InputPnk (4) Y2 InputControllerControllerTriac Sink with Separate TransformerElectronic Fail-Safe Actuator with MFTBlk (1) CommonLineVoltsRed (2) HotBlkLineVolts2 to 10 VDCFeedback Signal ( )Org (5) U Output1810Notes:(1) – CommonMeets cULus requirements without the need of anelectrical ground connectionRed (2) HotAWht (3) Y Input(–)224 VAC Transformer18Wht (3) Y1 InputAActuators with appliance cables are numbered.Org (5) U Output 2 to 10V2Actuators may be connected in parallel. Powerconsumption and input impedance must be observed.3Actuators may also be powered by 24 VDC.5Only connect common to neg. (-) leg of control circuits.7A 500 resistor converts the 4 to 20 mA control signalto 2 to 10 VDC.8Control signal may be pulsed from either the Hot(Source) or Common (Sink) 24 VAC line.9Contact closures A & B also can be triacs. A & B shouldboth be closed for the triac source and open for triacsink.10For triac sink the Common connection from the actuatormust be connected to the Hot connection of thecontroller. Position feedback cannot be used with a triacsink controller. The actuator internal common referenceis not compatible.12IN4004 or IN4007 diode. (IN4007 supplied, Belimo Partnumber 40155)18Actuators with plenum rated cable do not have numberson wires; use color codes instead.B8(–)2 to 10 VDCFeedback Signal ( )129Direction of rotation switchAOn/OffCCWCWCWB 18AB 18Floating Point324 VAC Transformer1824 VAC Transformer (AC Only)VoltsVoltsABRed (2) HotΩ500 ΩΩ 1/4watt(–)Control Signal( )VDC/mAWht (3) Y1 Input, 2 to 10V718Blk (1) CommonLineBlk (1) CommonLine(–)Control Signal( )VDC/mACCW7C500 Ω1/4 wattRed (2) HotWht (3) Y1 Input, 2 to 10VOrg (5)Org (5) U Output, 2 to l mode acc. to Y* Default selectable 0-100%. See Configuration Data Sheet.** Customizable. See Configuration Data Sheet.VDC / 4 to 20 24 VAC TransformerPNKPinkRosadoRosaCor-de rosTriac SourceREDRedRojoRougeVermelhoTriac verride Control Min, Mid, Max Postions800-543-9038 USA866-805-7089 CANADA203-791-8396 LATIN AMERICA/CARIBBEAN15
Belimo worldwide: www.belimo.comBELIMO AmericasUSA Locations, 43 Old Ridgebury Road, Danbury, CT 06810Tel. 800-543-9038, Fax 800-228-8283, marketing@us.belimo.com1049 Fortunato Loop, Sparks, NV 89436Tel. 800-987-9042, Fax 800-987-8875, marketing@us.belimo.comCanada Locations, 5845 Kennedy Road, Mississauga, Ontario L4Z 2G3Tel. 866-805-7089, Fax 905-712-3124, marketing@us.belimo.comLatin America and the Caribbean Customer ServiceTel. 203-791-8396, Fax 203-791-9139, marketing@us.belimo.comBelimo Brasil Comércio de Automação Ltda.Tel: 55 11 3643-5656, Fax: 55 11 3643 5657, atendimentoaocliente@br.belimo.com.
Style 3 Style 5 Style 3 Style 1, 2, 4 Style B Style A No threads Threaded Install grooved side down. 800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA/CARIBBEAN 6 . AAB B AAB AAB 1 1 a) b) Signal direction. 800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA/CARIBBEAN 10
PLC-5 Instruction Set Alphabetical Listing PLC-5 Instruction Set Alphabetical Listing For this Instruction: See Page: For this Instruction: See Page: For this Instruction: See Page: For this Instruction: See Page: ABL 17-51 CMP 3-3 JSR 13-12 RES 2-25 ACB 17-71 COP 9-20 LBL 13-5 RET 13-12 AC
Five Meanings of Direct Instruction Barak Rosenshine. The opinions expressed herein do not necessarily reflect the position of the supporting . Direct instruction refers to instruction led by the teacher, as in “the teacher provided direct instruction in solving these problems.” But if one enters “direct instruction”
five days using either rich instruction or traditional instruction. Rich instruction consisted of . word meanings, depth of word knowledge, writing quality and number of target words used in . this study is based on the assumption that direct instruction, specifically, rich instruction, .
MI 020-360 Instruction, Wiring Guidelines for Foxboro FOUNDATION fieldbus Transmitters MI 020-369 Instruction - Pressure Seals MI 020-427 Instruction - Intrinsic Safety Connection Diagrams and Nonincendive Circuits MI 022-138 Instruction - Bypass Manifolds - Installation and Maintenance MI 022-335 Instruction - Model CO Compact Orifice
1 Updates the LR. If the instruction is a branch instruction, the address of the instruction following the branch instruction is placed into the LR. MB (21–25) and ME (26–30) These fields are used in rotate instructions to specify a 32-bit mask.
A Closer Look at Instruction Set Architectures 5.1 Introduction 293 5.2 Instruction Formats 293 5.2.1 Design Decisions for Instruction Sets 294 5.2.2 Little versus Big Endian 295 5.2.3 Internal Storage in the CPU: Stacks versus Registers 298 5.2.4 Number of Operands and Instruction Length
The MIPS Instruction Set This section brie y describes the MIPS assembly language instruction set. In the description of the instructions, the following notation isused: If an instruction description begins with an, then the instruction is not a member of the native MIPS instruction set, but is available as a pseudoin-
security rules for protecting EU classified information, certain provisions in this guide are still based on Commission Decision 2001/844. In the absence of new guidelines they should continue to be applied. Under the new security rules, all classification markings must now be written in FR/EN format (e.g. RESTREINT UE/EU RESTRICTED). EU grants: H2020 Guidance — Guidelines for the .