Air Purifier Épurateur D’air Purificador De Aire
840129900 ENv02.qxd11/1/0411:00 AMPage 1Air PurifierÉpurateur d’airPurificador de aireEnglish . 2USA: 1-800-851-8900READ BEFORE USELIRE AVANT L’UTILISATIONLEA ANTES DE USAR840129900Français . 17Canada : 1-800-267-2826Español . 32México: 01 800 71 16 100Le invitamos a leer cuidadosamente esteinstructivo antes de usar su aparato.
840129900 ENv02.qxd11/1/0411:00 AMPage 2IMPORTANT SAFEGUARDSREAD AND SAVE THESE INSTRUCTIONS.In order to prevent the risk of fire, electric shock, personal injury or damage to property,follow these instructions carefully. When using electric appliances, basic safety precautionsshould be followed, including the following:1. Read all instructions before using thisair purifier. Save these instructions forreference.2. Direct ultraviolet light exposure to theeyes can cause temporary or chronicadverse effect to your eyesight.3. Do not immerse this product in water orsplash water on it. An electrical shortmay result in shock or fire.4. Do not handle the plug with wet hands;electrical shock may occur, resulting ininjury or death.5. Never attempt to disassemble or alterthe product in any way not instructed bythis manual. Shock, fire, or bodily injurymay occur. Contact Hamilton Beachat 1-800-851-8900 (U.S.) or 1-800-2672826 (Canada) for assistance.6. Do not place your face directly on theoutlet grille or look into the ultraviolet light.7. Do not operate this product in anygreasy environment such as in thekitchen. This product is not intended tofilter oil or grease from the air.8. Do not operate this product near an openfire. It may ignite and cause fire, resultingin bodily injury or property damage.9. Do not operate this product in a garageor other area with oil or chemicals suchas solvents or insecticides.10. Always unplug the power cord from thereceptacle when the air purifier is not inuse, before cleaning, replacing parts, orbefore moving to another location.11. Do not insert foreign objects into theproduct for any reason. Bodily injuryor property damage may occur.12. Do not use this product outdoors. It isintended for indoor use only.13. Do not operate this appliance withoutthe outlet grille in place or if the outletgrille is broken or damaged.14. This air purifier is equipped with safetyinterlock switches that turn the unit offif the intake or outlet grilles are removed.DO NOT attempt to defeat or overridethis safety feature.15. WARNING: To reduce the risk of fire orelectric shock, do not use this purifierwith any solid-state speed controldevice.SAVE THESE INSTRUCTIONS!Other Consumer Safety InformationThis appliance is intended forhousehold use only.This appliance is equipped with apolarized plug. This type of plug has oneblade wider than the other. The plug willfit into an electrical outlet only one way.This is a safety feature intended to helpreduce the risk of electrical shock. If youare unable to insert the plug into theoutlet, try reversing the plug. If the plugshould still fail to fit, contact a qualifiedelectrician to replace the obsolete outlet.Do not attempt to defeat the safetypurpose of the polarized plug bymodifying the plug in any way.2If a longer cord is necessary, anapproved extension cord may be used.The electrical rating of the extensioncord must be equal to or greater thanthe rating of the air purifier. Care mustbe taken to arrange the extension cord sothat it will not drape over the countertopor tabletop where it can be pulled on bychildren or accidentally tripped over.Route the electrical or extension cordclear of furniture to prevent damagefrom pinching.
840129900 ENv02.qxd11/1/0411:00 AMPage 3wWARNINGGermicidal Light Radiation Hazard Never operate with damaged, broken or missing outlet grille louversor without the outlet grille. Never operate with damaged, broken or cracked housing. Always unplug unit before cleaning, servicing or replacing the UV bulb. Never look directly at UV bulb or place face directly on outlet grille. Use only Hamilton Beach replacement UV bulb: Part No. 04810. Read all instructions before using.Failure to follow these instructions can result in direct exposure togermicidal light, which can cause temporary or chronic damage toyour eyesight, or even blindness.About Your Air PurifierThe air purifier functions as anair cleaner by helping to disinfectairborne bacteria and removingparticulates from the air.The air is cleaned in three stages:1. A fan draws air through the intakegrille on the front of the air purifier.Then it passes through the carbonpre-filter which traps large dustparticles and reduces odors.2. The white HEPA filter then removesparticles as small as 0.3 micronsfrom the air at 99.97% effectiveness.3. The clean air is then exposed togermicidal-grade ultraviolet light toreduce the level of airborne bacteria,molds, and viruses. The purified air isthen released through the outlet grilleon the top of the unit.To Order Replacement PartsReplacement parts may be available where the air purifier was purchased orcan be obtained directly from Hamilton Beach.PurifierModelControlType04160Manual04161Room Size* Carbon(sq. ft.)Pre-FilterHEPAFilterUV BulbStarter TypeFS-5 or FS -22200 ft049220491204810904004100AirSmart200 ft04922049120481090400410004162Manual350 ft04923049130481090400410004163AirSmart350 ft0492304913048109040041002 22 2* Each air purifier is designed to filter the room five times per hour at highspeed. Factors such as room shape and ceiling height can affect this rate.It is normal that the air flow will be reduced as the filters become clogged.See “Checking the Filters” on page 10 for more information.3
840129900 ENv02.qxd11/1/0411:01 AMPage 4Know Your Air PurifierParts and Features1. Outlet Grille2. Ultraviolet (UV) Bulb3. Control Panel4. AirSmart Sensor*5. UV Starter46. UV Bulb Check Window(not shown – see page 12 for location)7. Filter Check Gauge8. Air Sensor Cleaner*9. HEPA Filter10. Carbon Pre-Filter11. Intake Grille* Available on AirSmart models only.Manual control models do not includethese features.
840129900 ENv02.qxd11/1/0411:01 AMPage 5How to Assemble and UseIMPORTANT: Your Hamilton Beach air purifier is designed for easy use andmaintenance. Make sure that the HEPA filter and carbon pre-filter are properlyinstalled before use.Before First UseBe sure to remove all packing materials.The carbon pre-filter is packed in aplastic bag inside the air purifier forshipping.Refer to page 6 for unpacking andinstallation instructions.Selecting the Proper LocationTo prevent the risk of personal injury or damage to the air purifier and providethe best possible performance of your air purifier, follow the placementguidelines below:DO:DO NOT: Place the air purifier on a flat, stablesurface. Do not stand, sit, or place anyobjectson the airpurifier. It isnot designedto supportadditionalweight. Place the air purifier near an electricaloutlet where it is out of the way.Make sure that the air purifier andthe cord do not present trippinghazards. Select a central location withadequate air circulation. Turn off and unplug the air purifierbefore moving or servicing it, or if itwill not be used for several days. Route the electrical cord clear offurniture to prevent damage frompinching. Do not block the air intake andoutlet grilles with drapes, curtains,or blinds. This may cause reducedperformance. Do not use in a kitchen, garage, orarea with grease, oil or chemicalssuch as solvents or insecticides. Do not place on or near heatsources such as stoves, radiators,or heaters, or in direct sunlight. To reduce electrical noise andinterference, do not place on or near,or plug into the same outlet as TVs,baby monitors, or cordless phones.5
840129900 ENv02.qxd11/1/0411:01 AMPage 6Installing the Carbon Pre-Filter1NOTE: The carbon pre-filter should bereplaced approximately every threemonths.Remove the intake grille by carefullypulling the upper two side tabs awayfrom the body of the air purifier andlifting up.2Locate the black carbon pre-filter.It will be folded inside a plastic bag.Remove and discard the plastic bag.3Unfold and flatten out the blackcarbon pre-filter. Attach the fourcorners of the carbon pre-filterto the four hook fasteners on theHEPA filter.4Insert the two tabs on the bottom ofthe intake grille into the holes on thebottom ledge of the air purifier.Pivot the intake grille into place andlightly press on the upper corners ofthe grille to snap it into place.NOTE: The air purifier has a safetyswitch that prevents operation if theintake grille is not properly installed.DO NOT attempt to override ordisable this safety switch.6
840129900 ENv02.qxd11/1/0411:01 AMPage 7Plugging in the Air PurifierWARNING: To reduce the risk ofelectrical shock, never plug in the airpurifier while your hands are wet.Always unplug the air purifier beforemoving or servicing the unit.NOTE: The polarized plug will onlyfit in one direction—DO NOT tryto force the plug. If you are unable toinsert the plug into the outlet, tryreversing the plug. If the plug still doesnot fit, contact a qualified electrician toreplace the obsolete outlet.Setting the Controls – Manual Control Models1. Germicidal UV Button – Turns onthe germicidal UV lamp to reduceharmful bacteria from the filtered air.When this button is on, a bluish glowshould be visible through the UVbulb check window on the top ofthe unit.NOTE: The light will not come on ifthe fan is turned off.2. UV “On” Indicator – Lights whenthe germicidal UV lamp is on.3. Power On Indicator – Lights whenunit is on.4. Fan Speed Knob – Turn the fanspeed knob to the desired setting.There are four settings: Off WhisperClean – Use for quiet,nighttime operation or for constantlow-speed filtration. Medium – Provides a higher fanspeed; use for quickly filteringdust, pollen, smoke, etc. from aroom. QuickClean – Provides cleaningduring acute needs.7
840129900 ENv02.qxd11/1/0411:01 AMPage 8Setting the Controls – AirSmart Models1. Germicidal UV Button – Turns onthe germicidal UV lamp to reduceharmful bacteria from the filtered air.When this button is on, a bluish glowshould be visible through the viewingwindow on the top of the unit.NOTE: The light will not come on ifthe fan is turned off.2. UV “On” Indicator – Lights whenthe germicidal UV lamp is on.3. Pre-Filter Timer Reset Button4. HEPA Filter Timer Reset Button5. AirSmart Display – When the airpurifier is first turned on, theAirSmart sensor will analyze the airto determine the current air quality.A bar will move back and forthacross the display panel until the airquality is determined. This will takeabout one minute. The sensor willthen continue to monitor and showthe air quality (poor, fair, or good) ina bar graph in the display. If the fanis set to Auto, the sensor automatically adjusts the fan speed for themost effective air purification.8AIRQUALITYAUTO SELECTEDFAN SPEEDPoorQuickClean FairMediumGoodWhisperClean The Display also has check marksthat will appear to indicate that it istime to check the carbon pre-filter orHEPA filter. See “Checking theFilters” on page 10. Once the filtershave been checked, and if necessary, replaced, press the recessedRESET button with the end of a pen,toothpick, or small nail. This willreset the “timer-like” control.6. Power On Indicator – Lights whenunit is on.7. Fan Speed Knob – Turn the fanspeed knob to the desired setting.There are five settings: Off WhisperClean – Use for quiet,nighttime operation or for constantlow-speed filtration. Medium – Provides a higher fanspeed; use to quickly filter dust,pollen, smoke, etc., from a room. QuickClean – Provides cleaningduring acute needs. Auto – Functions with theAirSmart sensor and automaticallyselects the fan speed dependingon the air quality detected. Thisis the normal setting forcontinuous use.
840129900 ENv02.qxd11/1/0411:02 AMPage 9How to CleanYour air purifier is designed to provide years of trouble-free service withminimal maintenance. The following instructions will help you maximize the lifeand efficiency of your air purifier.wWARNINGTo reduce risk of electric shock: Always unplug before cleaning. Do not immerse in water or other liquid.Cleaning the Air Purifier Wipe the enclosure, control panel,and cord with a damp cloth orsponge. The intake grille can be removedand washed in warm, soapy water.Do not place in dishwasher. Makesure the grille is completely drybefore reinstalling. The outlet grille should simply bedusted. It should not be immersedin water. No part of the air purifier should beplaced in a dishwasher.Cleaning the AirSmart SensorOn models equipped with theAirSmart sensor, it is recommendedto clean the sensor monthly.1. Remove the air sensor cleaner fromthe storage compartment behind theintake grille (see item 8, page 4).2. The sensor is located on the side ofthe unit. Openthe sensorcompartment(as illustrated),then placethe air sensorcleaner intothe sensorSensoropening.3. Push the air sensor cleaner in andout of the sensor opening severaltimes to clean the sensor lens.4. Close the sensor compartment andput the air sensor cleaner back in thestorage compartment. Replace theintake grille. Make sure the sensordoor is fully closed. If it is not, thesensor may not operate properly.9
840129900 ENv02.qxd11/1/0411:02 AMPage 10Checking the FiltersA special filter check gauge is includedwith your air purifier to allow you tocheck the condition of the filters. It isstored in a compartment behind thefront intake grille. See item 7 on page4 for location.The HEPA filter should last approximately 12 months with continuoususe, less in areas with a high levelof airborne particles such as dustor pollen.Insert either end of the filter checkgauge into the recessed hole on thetop of outlet grille. Turn the fan onQuickClean. 12The colored cylinder should float upthe filter check gauge. If it does notmove from the bottom of the gauge,the filter(s) are clogged and need to bereplaced.Filter(s) OKReplaceFilter(s)10The carbon pre-filter will lastapproximately three months.NOTE: You must reinstall and snapthe intake grille before checking thefilters with the gauge. The air purifierwill not operate if the grille is not inplace.
840129900 ENv02.qxd11/1/0411:02 AMPage 11Replacing the HEPA FilterThe HEPA filter will normally last about12 months before it must be replaced,or approximately every fourth time thecarbon pre-filter is replaced.If the filter check gauge indicates thatthe filter requires replacement, it isrecommended that you first replacethe carbon pre-filter and then use thefilter check gauge to check the filteragain. If the colored cylinder still doesnot float up the gauge, the HEPA filtermust also be replaced.1Turn off and unplug air purifier. Removethe used HEPA filter by gripping thesides and pulling outward, as shown.Discard the used filter. It cannot becleaned.2Obtain a replacement HEPA filter.Insert the unwrapped HEPA filter, hookfastener side out, into the air purifier.NOTE: Improper filter installation willresult in poor air filtration.11
840129900 ENv02.qxd11/1/0411:03 AMPage 12Replacing the UV BulbThe UV bulb is designed to provideapproximately one year of continuous,effective operation. After this time, thebulb may remain illuminated, but itseffectiveness is greatly reduced.123For maximum germicidal protection,replace the UV bulb when replacingthe HEPA filter, or if the UV bulbcheck window does not glow whenthe UV switch is on. Replacementbulbs can be obtained directly fromHamilton Beach.Turn off and unplug the air purifier.Open and remove the outlet grille bypulling upon the handle on the upperback of the air purifier.Gently rotate the bulb a quarter turn ineither direction until it unlocks from thesocket. Pull the pins out the sides ofthe socket, one end at a time.Be careful not to touch the glasspart of bulb. Handle by metal endsonly. Oil from fingertips on the glassbulb will shorten the life of the bulb.Carefully unpack the bulb and discardthe packaging. Starting with one end ofthe bulb, then the other, gently insertthe metal pins on the bulb into thewhite slotted socket one pin at a time.NOTE: Only one pin will fit in the socketat a time. DO NOT force the pins intothe socket—you could break the bulb.12
840129900 ENv02.qxd11/1/0411:03 AMPage 13Replacing the UV Bulb(continued)4Once the ends of the bulb arecompletely inserted into the socket,rotate the bulb a quarter turn until itlocks into place.5Insert the two center tabs on the frontof the outlet grille into the middle slotson the front of the opening. Pivot thegrille down toward the back of the airpurifier.6Press lightly down on the backcorners of the outlet grille to snapit into place.NOTE: The air purifier has a safetyswitch that prevents operation whenthe top outlet grille is not properlyinstalled. DO NOT attempt to overrideor disable this safety switch. See theGermicidal Light Hazard Warning onpage 3.13
840129900 ENv02.qxd11/1/0411:03 AMPage 14Replacing the UV StarterIf the UV bulb does not light afterinstalling a new bulb, the startershould be replaced. See page 3for replacement parts.1Starter214Turn off and unplug air purifier.Remove the intake grille and filters.The starter is the small cylinder-shapedpart located behind the filter.Turn the starter counterclockwise untilit unlocks, then pull it out. To install thenew starter, insert the starter and turnclockwise. Replace filters and intakegrille.
840129900 ENv02.qxd11/1/0411:03 AMPage 15Troubleshooting GuideThe following section provides the solutions to many common problems andquestions. If your air purifier is not working correctly, review these solutionsfirst. If your problem is still not solved after reviewing this guide, call our toll-freecustomer service number, listed on the front cover of this manual, for assistance.The Air Purifier Will Not Turn On Are the intake grille and the outletgrille installed and locked into place? Is the air purifier plugged into apowered outlet? Is the fan speed knob turned on?The Air Purifier Changes Speed AirSmart models are designed tosense the level of contaminants in theair and adjust the fan speed to providethe most effective air purificationpossible. If the AirSmart control isset to Auto, it will automaticallychange fan speeds to adjust forchanging air quality.Reduced Air Flow or Poor Filtering The intake or outlet grille may beblocked. Make sure nothing is infront of or on top of the air purifier. The carbon pre-filter or the HEPAfilter may be clogged. Check thefilters with the filter gauge andreplace them, if necessary.Germicidal UV Bulb Does Not Light Is the UV switch turned on? Is the fan running? The UV bulb willnot work unless the fan is on. The bulb may be burned out.See “Replacing the UV Bulb” forreplacement instructions. The UV starter may need replacement.See “Replacing the UV Starter” forreplacement instructions.Can’t Find Replacement FiltersCall 1-800-455-7213ORVisit TrueAirFilters.com15
840129900 ENv02.qxd11/1/0411:03 AMPage 16Customer ServiceIf you have a question about your appliance, call our toll-free customer servicenumber. Before calling, please note the model, type, and series numbers and fill inthat information below. These numbers can be found on the bottom of your appliance. This information will help us answer your question much more quickly.MODEL: TYPE : SERIES:This warranty applies to products purchased in the U.S. or Canada.LIMITED WARRANTYThis product is warranted to be free from defects in material and workmanship for aperiod of one (1) year from the date of original purchase, except as noted below. Duringthis period, we will repair or replace this product, at our option, at no cost. THEFOREGOING WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHEREXPRESS OR IMPLIED, WRITTEN OR ORAL INCLUDING ANY WARRANTY OFMERCHANTABILITY OR FITNESS FO
* Available on AirSmart models only. Manual control models do not include these features. 840129900 ENv02.qxd 11/1/04 11:01 AM Page 4. 5 How to Assemble and Use IMPORTANT: Your Hamilton Beach air purifier is designed for easy use and maintenance. Make sure that the HEPA filter and carbon pre-filter are properly
ALFA LAVAL OIL PURIFIER ALFA LAVAL MOPX 207 Oil Purifier Alfa Laval FOPX 607,FOPX 609,FOPX 610 Oil Purifier Alfa Laval Mab 204,mab 205,mab 206,mab 207 Oil Purifier Alfa Laval Mab 103,Mab 104 Oil Purifier B u s i n e s s S e g m e n t s. MARINE ENGINE SPARE
Power Power on/off the air purifier Timer Set the timer of the air purifier Mode You can choose Smart or Sleepmode Fan speed You can choose fan speed Light You can turn on/off the air purifier lights Schedule You can set the Air Purifier operating schedule Notification You can receiveair quality status, filter remaining information Manage product
Packaging, Know Your Air Purifier P.6 Features P.7 Operation and Use, Replacing HEPA Filter P.8 Replacing UV Light, Maintenance P.9 Troubleshooting, Service Center P.10 Limited Warranty P.11 Warranty Card P.13 Order Form P.14 AIR PURIFIER MODELS This instruction manual applies to the following Crane Air Purifier product range: PENGUIN
Coway Airmega 240 Air Purifier User Manual July 26, 2022August 10, 2022 Leave a comment on Coway Airmega 240 Air Purifier User Manual . Do not use in baths, showers, swimming pools, or other areas where the purifier may be in direct contact with water. CAUTION : Failing to follow the precautions below may result in slight physical injury or .
coway AP-1019C Air Purifier User Manual July 16, 2022July 16, 2022 Leave a comment on coway AP-1019C Air Purifier User Manual . Do not use in baths, showers, swimming pools, or other areas where the purifier may be in direct contact with water. Do not install on a slope. Use at least 20 cm away from walls or other objects on each side.
4. Clean any remaining dust or hair inside the purifier using a vacuum hose. DO NOT use water or liquids to clean the purifier. 1. Plug in the air purifier and turn it on. 5. Remove the new filter from its packaging and place it into the purifier with the pull tabs facing the opening. The HEPA filter should be facing the opening.
Figure 1. Black box model of the solar water purifier Energy flow: Solar water purifier will receive and collect solar energy converts this energy into heat. Material flow: Dirty and impure water is given as input in water purifier and clean drinking water comes out as output. Information Flow: From electrical energy of solar circuit and battery, controller shows charging status of
Installation Instructions Germicidal Air Purifier Sizes 1620, 1625, 2020, 2025, 2420 NOTE: Read the entire instruction manual before starting the install. TABLE OF CONTENTS . If EAC terminals are not available, the Accessory Flow Sensor Kit, model KIT--160--000, must be purchased for use with the Air Purifier. Air Purifier models PGAPAXX1620,
