NS0-591

2y ago
16 Views
2 Downloads
1.80 MB
11 Pages
Last View : 1d ago
Last Download : 3m ago
Upload by : Luis Waller
Transcription

NS0-591 DumpsNS0-591 BraindumpsNS0-591 Real QuestionsNS0-591 Practice TestNS0-591 dumps freeNetworkApplianceNS0-591NetApp Certified Support Engineer, ONTAP il/NS0-591

QUESTION 50In a 4-node MetroCluster cluster, both clusters are alerting that the connection to an ATTO bridge is lost.Which three components should be verified to determine what is causing this problem? (Choose three.)A.B.C.D.E.the SFPs that are connecting the ATTO bridge to the switchthe dark fiber cables between sitesthe ATTO bridgethe SFPs in the storage controllersthe fiber cable that is connecting the ATTO bridge to the switchCorrect Answer: ACEReference: https://library.netapp.com/ecm/ecm download file/ECMP1650547QUESTION 51A customer has created an interface group (igroup) named a0a, a VLAN named a0a-2500, and a data LIF associated with the VLAN interface that has been assigned an IP of 10.254.10.100. The customer is able to ping 10.254.10.100from a Windows client without any issues, but data traffic is not working.In this scenario, what is the solution to the problem?A. Disable flow control on the a0a interface.B. Configure an appropriate service policy for the data LIF.C. Correct the MTU mismatch between the broadcast domain configuration and the upstream network switches.D. Allow data traffic by using LIF firewall policies.Correct Answer: DQUESTION 52At a customer site, the storage failover giveback command fails when giving back the root aggregate. Whatwould be two reasons for this failure? (Choose two.)A.B.C.D.There are active NFS connections.There are failed disks.The HA interconnect is not operational.There are active SIS operations running.Correct Answer: BCReference: ESTION 53 The error message shown below is reported inthe EMS log file.

“[sis.changelog.full:warning]: Change logging metafile on volume DATA1 is full and can not hold any more fingerprint entries.”What are two ways to solve this problem? (Choose two.)A.B.C.D.Clear the changelog manually so that the operation can restart.Increase the size of the changelog to allow the operation to continue.Modify the storage efficiency policy so that deduplication runs more frequently.Modify the threshold that triggers a deduplication operation.Correct Answer: BDReference: https://kb.netapp.com/app/answers/answer view/a id/1070703/ ngQUESTION 54A customer reports that a LUN is offline because the volume is out of space even though the space-reserve parameter is configured to enabled on the LUN. Whichtwo statements are correct in this scenario? (Choose two.)A.B.C.D.The containing aggregate is thin-provisioned.The fractional reserve is set to 0%.Deduplication is inflating the LUN when it is brought online.The volume has snapshots.Correct Answer: ADQUESTION 55Click the exhibit button.

Referring to the exhibit, which change is required to enable the CIFS Autolocation function for the Users share?A. Edit the CIFS share’s properties to remove the changenotify property.B. Re-create the LIFs to allow both CIFS and NFS protocols.C. Change the CIFS share’s Symlink Properties parameter to symlinks.D. Modify the CIFS server’s option to enable SMB multichannel.Correct Answer:CReference: https://kb.netapp.com/app/answers/answer view/a id/1001512/ nd-dfs-advertisement-inQUESTION 56 A customer calls you about a performance issue that they experienced over the past few days. They want to know if data collection and root cause analysis (RCA) is possible for this issue. This issue appears to be aone time event.Which tool would be used to satisfy the customer’s ce ArchiveCorrect Answer:CSection: (none)Reference: https://kb.netapp.com/app/answers/answer view/a id/1031391/ t-occurred-in-the-pastQUESTION 57A customer reports that copying data over iSCSI attached LUNs is taking significantly longer than usual. The customer asks you to help to identify the root cause of this problem.Which two perfstat sections would you use to accomplish this task? (Choose two.)A. stats lunB. lun stats -vserverC. statitD. stats volumeCorrect Answer: BCQUESTION 58Click the exhibit button.

A customer reports that storage latency has recently increased substantially. No changes have been introduced, and the traffic did not change.Referring to the output shown in the exhibit, which corrective step should be taken?A.B.C.D.Add more spindles.Throttle the client traffic.Perform the volume reallocation.Move some volumes off the affected aggregate.Correct Answer: BQUESTION 59Click the exhibit button.Your customer added a new DS4246 shelf to their FAS system. They created an aggregate on the new shelf. Two weeks later, they log in to Active IQ and discover the Medium Impact error shown below.“Both SAS connections from one controller go to the same shelf.”Referring to the exhibit, which statement is correct?A. You are unable to obtain a “Cable Visualization” overview from Active IQ.B. A faulty cable is causing the problem.

C. A faulty IOM is causing the problem.D. You can correct this problem without downtime on the FAS system.Correct Answer: DReference: https://kb.netapp.com/app/answers/answer view/a id/1015132/ e-controller-go-to-the-sameQUESTION 60Click the exhibit button.

A storage administrator reports that when they enabled Vscan, they began receiving reports of CIFS users having very slow access to all their files. The storage administrator recovered from the issue by disabling Vscan on their SVM. Thestorage administrator was able to collect perfstat output during the time of the reported slow access, as shown in the exhibit.In this situation, what is the problem?A.B.C.D.The problem is on the SVM, as shown in the scan latency output.Vscan server 192.168.100.144 was slower than Vscan server 10.23.23.54 in completing Vscan requests.Vscan server 10.23.23.54 was slower than Vscan server 192.168.100.144 in completing Vscan requests.The problem was with both Vscan servers 192.168.100.144 and 10.23.23.54.Correct Answer: B

For More exams visit https://killexams.com/vendors-exam-listKill your exam at First Attempt.Guaranteed!

NS0-591 NS0-591 Dumps NS0-591 Braindumps NS0-591 Real Questions NS0-591 Practice Test NS0-591 dumps free NetworkAppliance NetApp Certified Support Engineer, ONTAP Specialist

Related Documents:

What Study Guide Works Best in Acing the NetApp NS0-162 NCDA Certification? The NS0-162 study guide is a combination of some proven study tips and the combination of all valuable study materials like sample questions, syllabus and practice tests in one place. Explore the Syllabus Topics and Learn from the Core:

NetApp Certified Storage Associate - Hybrid Cloud Network Appliance NS0-146 Dumps Available Here at: . You want to transfer data to a cloud-based storage solution. Which NetApp technology will accomplish this task? Options: A. FlexVol B. SnapMirror C. SnapRestore Network Appliance NS0-146

NetApp Certification NS0-505 Exam . An E2712 with one DE6600 Expansion Chassis, containing a total of 72, 3TB NL-SAS drives. D. An E5424 with one DE5600 Expansion Chassis, containing a total of 48, 900GB SAS drives. . A. Hardware cabling guide B. Install Guide C. Hardware Universe

A great way to start the NetApp Certified Implementation Engineer - SAN E-Series (NCIE-SAN) preparation is to begin by properly appreciating the role that syllabus and study guide play in the NetApp NS0-505 certification exam. This study guide is an instrument to get you on the same page with NetApp and understand the nature of the NetApp NCIE

Free VCE and PDF Exam Dumps from PassLeader . Visit PassLeader and Download Full Version NS0-506 Exam Dumps QUESTION 251 What communication link is necessary in order to establish cluster peer relations between two clusters? A. The cluster interface on each node must be able to communicate with the intracluster interface on

This study guide focuses on the newer exam but maintains the structure of the NS0-153 and NS0-163 exams for backwards compatibility. NOTE: Neither successful completion of the Accelerated NCDA Boot Camp Data ONTAP 8.0 7-Mode

The Ventilating Valve Type 595 and Ventilating and Bleed Valve Type 591 are primarily used where containers and pipes have to be aerated and/or vented. The float in the type 595/591 opens the valve if the level of the liquid falls. If the level of the liquid rises, the float is raised and pressed a

of domestic violence in 2003. Tjaden and Thoennes (2000) found in the National Violence Against Women Survey that 25.5% of women and 7.9% of men self-reported having experienced domestic violence at some point in their lives. Unfortunately, only a small percentage of abused men are willing to speak out in fear of ridicule, social isolation, and humiliation (Barber, 2008). Therefore, because of .