Switching Power Supply S8PS - RS Components

Switching Power SupplyS8PSCompact DIN-Rail MountingIndustrial Power Supplies withCapacities Up to 600 W Models range from 50 W to 600 W Universal input: voltage range100 to 240 VAC Power Factor Correction (PFC) on allmodels UL508 approval on 100-W and150-W models DIN-rail mounting brackets provided(except with 600-W model) Protection-ON alarm indicators(300-W and 600-W models) UL, CSA, VDE, and CE approved 3-year warrantyOrdering Information OPEN-FRAME TYPE POWER SUPPLIES WITH FRONT-MOUNTING BRACKETSRated input voltageg100 to 240 VACPower ratingsgOutputPart numberVoltageCurrentFront-mountingbracketDIN-rail mountingbracket5V10 AS8PS-05005S8PS-05005D12 V4.2 AS8PS-05012S8PS-05012D24 V2.1 AS8PS-05024S8PS-05024D100 W24 V4.5 AS8PS-10024S8PS-10024D150 W24 V6.5 AS8PS-15024S8PS-15024D50 W COVERED TYPERated input voltageg100 to 240 VACPower ratingsgOutputPart numberVoltageCurrentFront-mountingbracketDIN-rail mountingbracket5V10 AS8PS-05005CS8PS-05005CD12 V4.2 AS8PS-05012CS8PS-05012CD24 V2.1 AS8PS-05024CS8PS-05024CD100 W24 V4.5 AS8PS-10024CS8PS-10024CD150 W24 V6.5 AS8PS-15024CS8PS-15024CD50 W

S8PSS8PS ENCLOSED TYPERated input voltageg100 to 240 VACPower ratingsgPart numberOutputVoltageCurrentFront-mounting bracketDIN-rail mounting bracket300 W24 V14 AS8PS-30024CS8PS-30024CD600 W24 V27 AS8PS-60024C--- MODEL NUMBER LEGENDS8PS1231. Power Ratings050: 50 W100: 100 W150: 150 W300: 300 W600: 600 W2. Output Voltage3. Configuration05: 5 V12: 12 V24: 24 VC: Covered type with Front-mounting BracketD: Open-frame type with DIN Rail Mounting BracketCD: Covered type with DIN Rail Mounting BracketNone: Open-frame type with Front-mounting Bracket ACCESSORIES (SOLD SEPARATELY)DescriptionLengthWidthPart numberDIN-rail ((See Dimensions section for details.))0.5 m (1.64 ft)7.3 mm (0.29 in)PFP-50N1 m (3.28 ft)7.3 mm (0.29 in)PFP-100N1 m (3.28 ft)16 mm (0.63 in)PFP-100N2SpecificationsItem50 WEfficiency (typical)74 to 80% (depends on the model)100 W150 W300 W600 WLife expectancy (See Note 3.)10 yrs. min. (used at 40 C at the rated input with a 50% load, standard installation)InputVoltage100 to 240 VAC (85 to 264 VAC)Frequency47 to 63 HzCurrent (See Note 1.)0.9 or 0.45 Amax.Power factor (See Note 1.)0.95 TYP.Leakage current(See Note 1.)0.5 or 1.0 mA max.Inrush current (25 C, cold start)(See Note 1.)25 or 50 A max.1.8 or 0.9 A max.2.7 or 1.4 A max.5.4 or 2.7 A max.10 or 5 A max.(This table continues on the next page.)Note: 1. 100% load for rated input voltage (100 VAC or 200 VAC)2. Mean Time Between Failures is calculated according to the probability of accidental device failures, and indicates reliability ofdevices. Therefore, it does not necessarily represent a life of the product.3. The life expectancy shown in the above table indicates average operating hours under the ambient temperature of 40 C and aload rate of 50%. Normally this is determined by the life expectancy of the built-in aluminum electrolytic capacitor. It must benoted that the life expectancy of the fan built into the 600-W model is not included.4. The weight indicated is for the open-frame type. (Includes the cover for 300-W and 600-W models.)

S8PSS8PSSpecifications Table -- continued from previous page50 WItem100 W150 W300 W600 WOutputVoltage adjustment range--5% to 10%Ripple (See Note 1.)2% (p--p) max.Input variation influence0.4% max. (at 85 to 132 VAC input/at 170 to 264 VAC input, 100% load)Load variation influence0.8% max. (with rated input, 0 to 100% load)Temperature variation influence (See Note 1.)0.05%/ C max.Rise time1,000 ms max. (up to 90% of output voltage at rated output voltage/current)Hold time (See Note 1.)20 ms min.Additional functionsOverload protection105% min., voltage trailing intermittent operation(With the 600-W model, output is turned OFF at 5 s min.)Overvoltage protectionYesOverheat protectionNoProtection-ON alarm indicatorNoYes (Red)Parallel operationNoYes, 2 units max.YesCharacteristicsCooling methodAmbient temperatureNatural air-coolingFanOperatingSee the derating curve in the Engineering Data section. (with no condensation oricing)Storage--25 C to 65 C (-13 F to 149 F) with no condensation or icingAmbient humidity25% to 85%Dielectric strength3.0 kVAC, 50/60 Hz for 1 min (between all inputs and outputs)2.2 kVAC, 50/60 Hz for 1 min (between all inputs and GR terminals)1 kVAC, 50/60 Hz for 1 min (between all outputs and GR terminals)Insulation resistance100 MΩ max. (between all output and input/GR terminals at 500 VDC)Vibration resistance10 to 55 Hz, 0.75-mm amplitude for 2 h each in X, Y, and Z directionsShock resistance300 m/s2 (approx. 30G), 3 times each in X, Y, and Z directionsOutput indicatorYes (green)Electromagnetic interferenceConforms to FCC Class B, EN50081-1EMC(EMI):Emission Enclosure:Emission AC Mains:Harmonic Current:(EMS):Immunity ESD:Approved standardsUL1012, CSAC22.2 No.950, CSAC22.2 No. 14,EN60950,VDE0160.Mean Time Between Failure (MTBF) See Note 2.135,000 hrs min.Weight (See Note 4.)400 g max.EN50081-1EN55022 class BEN55022 class BEN61000-3-2EN50082-2EN61000-4-2: 4-kV contact discharge (level 2)8-kV air discharge (level 3)Immunity RF-interference:ENV50140:10 V/m (80 MHz to 1 GHz) (level 3)Immunity Conducted Disturbance: ENV50141:10 V (0.15 to 80 MHz) (level 3)Immunity Burst:EN61000-4-4: 2-kV power-line (level 3)2-kV output line (level 4)Immunity Surge:EN61000-4-5: between 3-kV linesbetween 4.5-kV line and FGUL508, UL1012, CSAC22.2 No. 950, CSAC22.2 No. 14, EN60950,VDE0160.700 g max.UL1012, CSA C22.2 No. 950,CSA C22.2 No. 14, EN60950,VDE0160.60,000 hrs min.900 g max.2,200 g max.3,500 g max.Note: 1. 100% load for rated input voltage (100 VAC or 200 VAC)2. Mean Time Between Failures is calculated according to the probability of accidental device failures, and indicates reliability ofdevices. Therefore, it does not necessarily represent a life of the product.3. The life expectancy shown in the above table indicates average operating hours under the ambient temperature of 40 C and aload rate of 50%. Normally this is determined by the life expectancy of the built-in aluminum electrolytic capacitor. It must benoted that the life expectancy of the fan built into the 600-W model is not included.4. The weight indicated is for the open-frame type. (Includes the cover for 300-W and 600-W models.)

S8PSS8PSEngineering Data DERATING CURVEOpen-frame TypeCovered Type50- to 150-W ModelsForced air-cooling;600-W ModelLoad (%)Load (%)50- to 150-W ModelsForced air-cooling50- to 150-W ModelsNatural air-cooling50- to 150-W ModelsNatural air-coolingAmbient temperature ( C)Ambient temperature ( C)Note: 1. The derating curve shown is for standard installation. The derating curve depends on mounting direction of the Power Supply.2. Forced air-cooling must be provided with an air volume of 1 m3/mm min. STANDARD INSTALLATION50-W Type20 mm min. 20 mm min.20 mm min.20 mm min.20 mm min.20 mm min.20 mm min.20 mm min.100/150-W Type30 mm min.30 mm min.20 mm min.20 mm min.30 mm min.30 mm min.20 mm min.300-W Type30 mm min.30 mm min.20 mm min.20 mm min.600-W Type20 mm min.20 mm min.20 mm min.20 mm min.20 mm min.

S8PSS8PS OVERLOAD PROTECTIONThe Power Supply has an overload protection function thatprotects the load and the power supply from possibledamage by overcurrent. When the output current rises abovea set value (105% of the rated output current), the protectionfunction is triggered, decreasing the output voltage. Whenthe output current falls within the rated range, the overloadprotection function is automatically cleared.600-W ModelsOutput voltage (V)50- to 300-W ModelsIntermittentoperationIf an excessive current flows for 5 s or more, the output willbe turned OFF and simultaneously protection-ON alarmindicator will be lit. To reset the S8PS, turn OFF the inputvoltage, leave the S8PS for at least three minutes, and thenapply the input voltage again.Note: Do not continue using the S8PS with the output terminals short-circuited or the overcurrent condition continued, otherwise the internal elements of the S8PSmay be damaged or broken.RatingOutput current (%)The Power Supply has an overvoltage protection functionthat protects the load and the Power Supply from possibledamage by overvoltage. When the output voltage risesabove a set value (120% of the rated output voltage), theprotection function is triggered, shutting OFF the outputvoltage. If this occurs, reset the Power Supply by turning itOFF for 1 minute min. and then turning it ON again.300- and 600-W ModelsOutput voltage (V) OVERVOLTAGE PROTECTIONRatedoutputvoltageIf voltage that is 115% of the rated output voltage or above isoutput, the output voltage will be turned OFF andsimultaneously protection-ON alarm indicator will be lit. Toreset the S8PS, turn OFF the input voltage, leave the S8PSfor at least one minute and then apply the input voltageagain.0V OVERHEAT PROTECTION FUNCTION600-W Model OnlyIf the internal temperature of the S8PS rises excessively as aresult of fan failure or any other reason, the overheat protectioncircuit will be triggered to protect the internal elements of theS8PS and simultaneously a protection-ON alarm indicator will belit. To reset the S8PS turn OFF the input voltage, leave the S8PSfor at least one minute and then apply the input voltage again.OvervoltageprotectionoperatingVariable range

S8PSS8PS INRUSH CURRENT, RISE TIME, HOLD TIMEInput ONInput OFFAC inputvoltageInrush current on input applicationAC inputcurrent96.5%90%OutputvoltageRise time(1,000 ms max.)Hold time(20 ms min.)Operation BLOCK DIAGRAMSS8PS-050 (50 W)Rectifier VAC(L)FuseINPUTAC(N)Noise filterDC OUTInrush currentprotection /smoothingcircuitDrive controlcircuitOverloaddetection circuitDetectorOvervoltagedetection circuit

S8PSS8PSS8PS-10024S8PS-15024S8PS-30024 (100 W) (150 W) (300 W)RectifierAC(L)FuseINPUT VNoise filterDC OUTAC(N)Inrush currentprotection /smoothingcircuitControl circuitOverloaddetection circuitDetectorOvervolltagedetection circuitS8PS-60024C (600 W)DC OUTRectifier/smoothingcircuitControl ctionOvervoltagedetection circuit

S8PSS8PSDimensionsUnit: mm (inch) FRONT-MOUNTING BRACKET TYPENote: For instructions on how to install the front-mounting brackets, refer to the a subsequent section: FRONT-MOUNTING BRACKETS.S8PS-050S8PS-050 (50 W) C (50 W)40(1.57)11.5 max.127 (5)3.57885(3.35)7108.6Five, M4terminal screws3.5 dia.3.5 dia.117 (4.6)11753.52828242014Three, M3depth: 6 max.100 (3.94)12.5S8PS-10024 (100 W)S8PS-10024C (100 W)50(1.97)11.5 max.145 (5.71)4.57892(3.62)108.6Five, M4 terminal screws74.5 dia.135 (5.31)Mounting holes (also onopposite side)1354.5 dia.4.5252827.515Three, M4depth: 6 max.100 (3.94)12.5

S8PSS8PSS8PS-15024 (150 W)S8PS-15024C (150 W)50(1.97)163 (6.43)11.5 max.4.5781092(3.62)78.6Five, M4 terminal screws153 (6.02)4.5 dia.153Mounting holes (also onopposite side)54.5 dia.4.5252827.515Three, M4 (depth: 6 max.)100 (3.94)12.5S8PS-30024C (300 W)Eight, M4depth: 8 max.,(also for theopposite side)10175 (6.89)14Seven, M4 terminal screws92(3.62)50(1.97)8.621110 (4.33)13150 (5.91)Four, M4depth: 8 max.100(3.94)13150 (5.91)5

S8PSS8PSUnit: mm (inch)S8PS-60024C (600 W)Seven, M4depth: 8 max.Eight, M4depth: 8 max.,(alsofor the opposite side)170 (6.69)108.6179 (7.05)60(2.36)92(3.62)1631160 (6.30)Four, M4depth: 8 max.,(opposite sideFour, M4only)depth: 8 max.14100(3.94)45(1.77)1234150 (5.91)100 (3.94)

S8PSS8PS FRONT-MOUNTING BRACKETS50-W ModelsUsing the Mounting Bracket1.59114.6Attach the Mounting Bracket to the panel and loosely tighten the two screws. Insertthe projected parts of the Bracket (b) to the square holes of the power supply (a).Then securely tighten the screws.15Two,3.5 dia.60744.6205Mounting Holes1131.54.715Two, M36020.520Mounting Bracket100/150-W ModelsAppearance andMounting DimensionsDimensions with Mounting BracketUsing the Mounting BracketMounting BracketMounting Bracket6.5115 dia.23.51.5115(4.53)max. 10538Mounting Bracket30Two, 5 dia.