S SITRAIN India - WordPress
sSITRAIN India(Siemens Training, Industry Sector)I-CS-VS-SITRAIN, TSDC-KalwaThe application of highly sophisticated technology will be beneficial only if people (including all our customers) are trained to use all its features and functions, that are particularly important for organizations.At Siemens, we understand the importance of elevating people’s skills in adapting to newer challenges and value the returns of investing in technical skill enhancement. Since 1980 Siemens has beenproviding training for customers in the field of Automation & Drives across various locations in Mumbai. Sitrain (Siemens worldwide training department on Industrial Automation & Drives Technology) nowcontinues to conduct training centrally at TSDC-Kalwa.Each course schedule consists of well balanced theory and hands-on training which helps to optimize the knowledge about the products. Our fleet of professional trainers ensure that each participant hashis contribution towards productivity and performance improvement in his organizationSiemens Automation & Drives training provides professional, systematic, comprehensive and high quality training to every customer in the following areas: Automation & related HMIs, SCADA,DCS & related Hardware & Software. Variable Speed, Electronic controlled AC/DC/Servo Drives and MV drives LV Switchgear including Air Circuit Breakers, Soft-Starters, SIMOCODE etc Electronic/Process Instrumentation, MechatronicsSITRAIN Conducts Trainings at 11-Locations in the Country:1.Sitrain-Kalwa2.ATC-North-1 (IATC Chandigarh)3.ATC-North-2 (Johns Electric Pvt. Ltd., Jaipur)4.ATC-South-1 (Karunya University, Coimbatore)5.ATC-South-2 (Esskay Services,Hyderabad)6.ATC-South-3 (Vi-Microsystems,Chennai)7.ATC-East (Esskay, Kolkata)8.ATC-West (Esskay, Navi-Mumbai)9.ATC-Central India (Artech Soln, Nagpur)10. MCMT is also a part of IA-DT Training & is conducted at Competency Enhancement Trg. Center-Bangalore & Esskay Pune.11. TSP - West (Training Service Provider) Christiani Sharpline, Digha, Thane.
sTechnical Pre-requisites for SITRAIN Training CoursesNote 1 : ALL-Courses General Eligibility :All participants attending all SITRAIN Trainings should necessarily be Diploma/Degree in Electronics or Instrumentation or Electrical Engineering OR Equivalent. Additionally for few higher level courseslike PCS-7, SIMOTION, SIMOCODE etc, please refer notes - 2,3,4,5 below.Note 2 : PCS-7 DCS-Courses Eligibility :All participants attending PCS-7 Trainings should necessarily be Diploma/Degree in Electronics or Instrumentation or Electrical Engineering, with a fairly good background of BASIC PLC along withrelated programming knowledge & experience on Step-7 Software.Note 3 : SIMOTION Drives-Courses Eligibility :All participants attending SIMOTION Trainings should necessarily be Diploma/Degree in Electronics or Instrumentation or Electrical Engineering, with a fairly good background of AC DRIVES.Knowledge & experience on SERVO Motors & Drives will be an added advantage.Note 4 : SIMOCODE Course Eligibility :All participants attending SIMOCODE Trainings should necessarily be Diploma/Degree in Electronics or Instrumentation or Electrical Engineering,with a fairly good background of BASIC SWITCHGEAR along with related knowledge on Electrical power. Knowledge & experience on BASIC PLC will be an added advantage.Note 5 : SIMATIC FAILSAFE Course Eligibility :All participants attending SIMATIC FAIL-SAFE Trainings should necessarily be Diploma/Degree in Electronics or Instrumentation or Electrical Engineering,with a fairly good background of BASIC PLC along with related programming knowledge & experience on Step-7 Software.
sNote : Training Centre (SITRAIN-Siemens Kalwa), 8-ATCS (Authorised Training Centres) & 1-TSP (Training Service Provider) are all centrally coordinated, monitored & controlled by SiemensSitrain, Kalwa. MCMT (Machine Tool Drives) Training at Bangalore/Pune & GTTC are controlled from Bangalore.1.(a) All the Basic & Advanced courses will be conducted at Siemens Ltd., Kalwa Works, Thane-Belapur Road, Thane - 400 601 (Maharashtra).(b) Only Basic courses, will be conducted, in our Authorized Training Centres (ATCs) i.e. ESSKAY-Navi-Mumbai, Kolkata & Hyderabad, KARUNYA-Coimbatore, Vi-Microsystems, Chennai,IATC- Panchkula Johns Electrics-Jaipur, Artech Solutions-Nagpur & Sharpline (Digha)2.Registration-booking of seats for all clients at ALL Training Centres & Courses will continue to be made CENTRALLY at SITRAIN-KALWA by Email / Phone: 91 (022) 39663208 / 39668087.(Contact Ms Avanti Satam) / through One-LMS portal link / nearest Siemens Industry Sector Sales / Service office.One LMS Link for siemens Internal participant:- a/en/index.do and for External com/india-pl /E-mail : customer.training.in@siemens.com.3.Course fee is to be paid in advance only on confirmation of seat, in the form of DD/Cheque drawn in favor of SIEMENS LTD & payable at Mumbai.The course fee includes the course material, breakfast, lunch and tea. However travel and stay will be in customer scope.4.Since there are limited seats in each programme, seats are confirmed on 1st come 1st served basis. Course timings are from 8.30 AM to 5.00 PM.5.(A) Every attempt will be made to conduct courses as announced. However we reserve the right to postpone or cancel the courses due to inadeqaute booking or circumstances beyond our control.We shall do our best to send timely communication in such situations.(B) Every attempt will also be made to accommodate the participants with SEATS at nearest (geographically) Siemens Training Centre in your area. This is valid for all parts of Indiaincluding North / South / East / West & Central India.7.Please note that the course fee is inclusive of service tax at present applicable rate of 12.36 %. However any change in the service tax rate will be accordingly applied at actuals.8.Please note that Rupees rates are applicable ONLY for Indian Nationals sponsored by INDIAN COMPANIES (Companies physically located in India).For Foreign Nationals or Indian Nationals sponsored by FOREIGN COMPANIES rates will be in EURO. contact us for more details on the same9.(a) Participants attending courses like TIA Advanced, WinCC, NET, PCS 7 are recommended to attend TIA Basic with S7 300 before they come for these courses, or should have an equivalentknowledge / experience on S7 - 300 & Step-7 Programming.(b) Participants attending MASTERDRIVES MC or SIMOTION-D should have good knowledge about AC Drives (like Master Drives or Sinamics S120 or attended these courses).(c)Participants attending DCS courses (PCS-7 Basic or Advance) should have good knowledge on PLCs preferrably Simatic S-7 PLCs & Step-7 Programming (or attended these courses).10) All the transactions (mainly commercial) like Training Order, Payment should be done necessarily through your nearest Siemens Regional Office only. You may contact us here at SITRAINKalwa Training Centre or Bangalore Training Centre directly, for respective general / technical information (for e.g. course content, address/location etc.)11) Special subsidised prices are available for college-courses. Contact point would be Siemens/SITRAIN. Email id- students.training.in@siemens.com(Contact Person:- Mr. Hrishikesh Kulkarni / Ms. Shalaka Shinde, Phone: 0091-22-3966 8087)Hotels information : For Kalwa /Navi-Mumbai, we have attached list of Hotels for your reference.For Coimbatore, Hyderabad, Chandigarh, Jaipur, Kolkata, Bangalore, Nagpur & Pune, please contact the respective Training Centres directly to get the Hotel-list from them.
sTraining Calendar for Siemens Automation Courses(Apr. – Sep.14)Course Title(Training Product)CourseCodePLC :SIMATIC S7-200AS200DaysCourse Fees(Rupees)inclusive ofService Tax(12.36%)SITRAIN Kalwa522,50002-06 JUNATC WEST EsskayATC SOUTH 1ServicesKarunya University(Navi-Mumbai)(Coimbatore)ATC SOUTH 2Esskay Services(Hyderabad)ATC SOUTH 3VI- Microsystems(Chennai)ATC NORTH 1IATC (Pachakula)ATC NORTH 3(Jaipur)15-18 APR15-18 APR31 MAR- 03 APRATC EAST EsskayServices (Kolkata)ATC CENTRALArtech Solution(Nagpur)CHRISTIANISHARPLINE,(Digha)12-15 MAYSimatic S7-1200 withStep-7 BasicAS1200418,00009-12 JUN08-11 JUL25-28 AUG09-12 SEP01-04 SEP05-09 MAYSimatic S7-1500 withStep-7 BasicAS1500516-20 JUN18,00002-06 JUN02-06 JUN07-11 JUL21-25 JUL18-22 AUG04-08 AUG22-26 SEP15-19 APR08-12 SEP28 APR- 02 MAY26-30 MAYTIA PORTALProgramming 1 (TIAPRO1)AS100523-27 JUN22,50014-18 JUL11-16 AUG15-19 SEPTIA PORTAL Servicing1AS101519-23 MAY22,50018-22 AUG22-26 SEP31 MAR- 09 APR21-29 APR12-20 MAYPLC : TIA Basic withSIMATIC S7-300 &Step7AS300836,00016-25 JUN03-12 APR05-13 MAY02-10 JUN14-22 JUL04-12 AUG15-24 SEP21-29 APR05-13 MAY09-17 JUN30 JUN- 09 JUL11-20 AUG02-11 APR09-17 JUN07-15 JUL20-28 AUG15-23 SEP01-09 AUG15-23 APR19-27 MAY28 JUL- 05 AUG18-26 AUG18-26 AUG01-09 SEP08-16 SEP15-23 APRPLC: TIA Basic withSimatic S7-400 & Step 712-21 MAYAS400836,00026 MAY-03 JUN02-10 JUN09-17 JUN21-29 JUL16-24 JUN19-27 JUN21-29 JUL01-09 SEP21-16 APR26-31 MAYPLC : TIA Advancedwith SIMATIC S7300/400AS410619-24 MAY19-24 MAY23-28 JUN27,00014-19 JUL30 JUL- 05 JUL28 JUL-02 AUG04-09 AUG22-27 SEP07-11 APRNetworking Course onProfibus/Profinet28 APR- 02 MAY16-20 JUNAS900522,50007-11 JUL11-16 AUG15-19 SEP08-12 SEP15-19 APRSIMATIC WinCC BasicAS600528 APR- 03 MAY26- 30 MAY22,50012-16 MAY16-20 JUN23-27 JUN30 JUN- 04 JUL30 JUN- 04 JUL15-17 APRSIMATIC WinCCAdvanced26-28 MAYAS 610313,50005-07 MAY02-04 JUN11-13 AUG22-24 SEP21-23 APRSIMATIC HMI PanelsAS620311-13 JUN13,50021-23 JUL25-27 AUG31 MAR-11 APR12-23 MAYDCS: SIMATIC PCS 7BasicAS7001060,00002-13 JUN30 JUN- 11 JUL30 JUN- 10 JUL28 JUL- 08 AUG04-14 AUG08-19 SEP15-25 APRDCS: SIMATIC PCS 7AdvancedAS710SIMATIC PCS7 SERV(Troubelshooting/Maint)AS7201060,00016-27 JUN08-19 SEP21-25 APR530,00005-09 MAY11-16 AUG15-17 APRSimatic Fail-safe(Distributed) course19-21 MAYAS 800313,50003-05 JUN25-27 AUG05-07 AUG02-04 SEP28-30 APR26-28 MAYSimatic Fail-safe(F-System) courseAS 810313,50016-18 JUN14-16 JUL11-13 AUG01-03 SEPSimatic S5AS 500418,000Trainings on RequestSimatic S7 (GRAPH Exclusively on Demand), Simatic PCS-7 BATCH, Simatic PCS-7 CEMATNotes:1) Training schedules & courses fees etc for all courses & batches listed above are subject to general terms / conditions attached in this same file.2)Holidays within the course period will be informed to the participant along with the respective course confirmations.3)Few of the courses (especially courses with 8 days or 10 days) may have Sat/Sun closed.4)All above Siemens product courses are mainly suitable for all our Industry-customers.5)But we also have special basic courses (Covering all areas above) but mainly suitable for College-customers.6)College-courses: (a) Basic-Automation (b) Basic-Drives (c) Basic-LV-Switchgear (d) Basic-Process-Instrumentation (e) Basic AC-Motors & Maintenance.7)Above college courses are not standard available in our calendar, but batches could be arranged on case-to-case basis, to suit college-dates/timings.31 MAR- 04 APR
sTraining Calendar for Siemens Drives Courses(Apr. – Sep.14)Course Title(Training f ServiceTax(12.36%)SITRAIN KalwaATC WEST EsskayServices(Navi-Mumbai)ATC SOUTH 1Karunya University(Coimbatore)31 MAR-04 APRDR100522,500ATC SOUTH 3VI- Microsystems(Chennai)07-11 APR06-10 MAYBasic course on AC/DCDrivesATC SOUTH 2Esskay Services(Hyderabad)ATC EASTEsskay Services(Kolkata)ATC CENTRALArtech Solution(Nagpur)CHRISTIANISHARPLINE(Digha)15-19 APR19-23 MAY23-27 JUN09-13 JUN16-20 JUN14-18 JUL04-08 AUGATC NORTH 3(Jaipur)21-25 APR12-16 MAY02-06 JUN08-12 JULATC NORTH 1IATC (Panchkula)23-27 JUN21-25 JUL18-22 AUG28 JUL- 01 AUG08-12 SEP15-19 SEP04-08 AUG01-05 SEP15- 19 SEP07-11 APR26-30 MAYBasic AC-Drives with MM4MaintenanceDR400522,50030 JUN- 04 JUL30 JUN- 04 JUL21-26 APR31 MAR- 05 APR19-24 MAYAC Drive: MasterDrivesVector ControlDR210609-14 JUN27,00007-12 APR05-10 MAY02-07 JUN26-31 MAY23-28 JUN07-12 JUL21-26 JUL18-23 AUG28 JUL-02 AUG08-13 SEP22-27 SEP01-06 SEP15-24 APR05-14 MAY09-18 JUNSIMOTION - System andProgrammingDR110836,00007-16 JUL18-27 AUG08-17 SEP07-12 APR31 MAR- 05 APR26-31 MAYSINAMICS S120DRS20627,00024-30 APR19-24 MAY26-31 MAY24-30 APR05-10 MAY16-21 JUN23-28 JUN28 JUL- 02 AUG09-14 JUN30 JUN- 05 JUL04-09 AUG14-19 JUL18-23 AUG07-12 JUL21-26 JUL07-13 AUG01-06 SEP15-20 SEP08-13 SEP15-20 SEP07-12 APRDR130619-24 MAY12-17 MAY09-14 JUN27,00022-27 SEP31 MAR- 05 APR05-10 MAYSINAMICS G130 / G15002-07 JUN02-07 JUN30 JUN- 05 JUL28 JUL- 02 AUG07-13 AUG01-06 SEP23 -28 JUN14-19 JUL07-12 JUL18-23 AUG08-14 AUG22-27 SEP22-27 SEP07-12 APR19-24 MAYDC Drive : SIMOREG DCMaster 6RA70DR700627,00005-10 MAY16-21 JUN21-26 JUL01-06 SEP22-27 SEP21-26 APR31 MAR- 05 APR15-21 APR12-17 MAYDC Drive :SINAMICS DCMaster 6RA80DR 710623-28 JUN27,00030 JUN-05 JUL07-12 JUL30 JUN- 05 JUL28 JUL- 02 AUG07-10 APR18-23 AUG28 APR- 01 MAY22-25 APR26-29 MAYSINAMICS G120DR G20418,00009-12 JUN31 MAR- 03 APR13-16 MAY03-06 JUN21-24 JUL22-25 JUL11-14 AUG25-28 AUG15-18 SEP16-19 SEPDR 500313,500MV Drive - PerfectHarmony (at SiemensNasik)DR1000530,00028-31 JUL11-14 AUGTrainings on RequestMasterdrives MC, MV Drive - Perfect HarmonyNotes:1)Training schedules & courses fees etc for all courses & batches listed above are subject to general terms / conditions attached in this same file.2)Holidays within the course period will be informed to the participant along with the respective course confirmations.3)Few of the courses (especially courses with 8 days or 10 days) may have Sat/Sun closed.4)All above Siemens product courses are mainly suitable for all our Industry-customers.05-08 MAY13-16 MAY02-05 JUN28-30 APRSINAMICS V5019-24 MAY5)But we also have special basic courses (Covering all areas above) but mainly suitable for College-customers.6)College-courses: (a) Basic-Automation (b) Basic-Drives (c) Basic-LV-Switchgear (d) Basic-Process-Instrumentation (e) Basic AC-Motors & Maintenance.7)Above college courses are not standard available in our calendar, but batches could be arranged on case-to-case basis, to suit college-dates/timings.14-17 JUL11-14 AUG15-18 SEP28 APR- 02 MAY25-28 AUG01-04 SEP19-22 MAY
sTraining Calendar for Siemens LV-Switchgear, AC Motor, Process Instrumentation Courses(Apr. – Sep.14)Course Title(Training Product)CourseDaysCodeCourse Fees(Rupees)inclusive ofService Tax(12.36%)SITRAINKALWAATC WESTEsskay Services(Navi-Mumbai)ATC SOUTH 1KarunyaUniversity(Coimbatore)ATC SOUTH 2Esskay Services(Hyderabad)ATC SOUTH 3VI-Microsystems(Chennai)ATC NORTH 1IATC (Pachakula)ATC NORTH 2(Jaipur)Training Programmes on LV Switchgear Products01-04 APR05-08 MAYLV SwitchgearProducts &MaintenanceCP100418,00002-05 JUN07-10 JUL04-07 AUG23-26 SEP15-16 APR19-20 MAYLV Power DistributionSystemsBT100216-17 JUN9,00010-11 JUN11-12 AUG08-09 SEP17-18 APR22-23 MAYSIMOCODE AC-MotorcontrolCP400212,00023-24 JUN14-15 JUL05-06 JUN31 JUL-01 AUG11-12 SEP02-03 SEP28-30 APR26-28 MAYBasic Automation forSwitchgear UserCP500313,50025-27 AUGAC Motor Basics &MaintenanceIM 100313,50016-18 JUL22-24 SEPEnergy ManagmentSolutionsBT20029,00026-27 JUN18-19 AUGSentron PowerManagerBT25029,000Soft StarterCP20029,00031 JUL-01 AUG01-02 SEPInstrumentation and Mechatronics12-15 MAYBasic Courseon ProcessInstrumentationPIA100418,00023-26 JUN07-10 JUL04-07 AUG08-11 SEP07 APR- 09 MAYBasic Course 3045,00023 JUN- 26 JUL12-24 MAYBasic Course onMechatronicsMECH1101214,40014- 26 JULTrainings on RequestSIRIUS Soft Starter, Sentron Power ManegerNotes:1)Training schedules & courses fees etc for all courses & batches listed above are subject to general terms / conditions attached in this same file.2)Holidays within the course period will be informed to the participant along with the respective course confirmations.3)Few of the courses (especially courses with 8 days or 10 days) may have Sat/Sun closed.4)All above Siemens product courses are mainly suitable for all our Industry-customers.5)But we also have special basic courses (Covering all areas above) but mainly suitable for College-customers.6)College-courses: (a) Basic-Automation (b) Basic-Drives (c) Basic-LV-Switchgear (d) Basic-Process-Instrumentation (e) Basic AC-Motors & Maintenance.7)Above college courses are not standard available in our calendar, but batches could be arranged on case-to-case basis, to suit college-dates/timings.24-25 SEPATC EAST EsskayServices (Kolkata)ATC CENTRALArtech Solution(Nagpur)CHRISTIANISHARPLINE(Digha)
sList of hotels in Navi Mumbai & Thane, near Sitrain Kalwa officeChainHotel NameAIRPORT AREABenzy PalaceVijaynagar, Marol Maroshi Rd, Andheri (E), Mumbai - 400 059.Tel.: 28279000-10 Fax: 28507909WESTERN SUBURBAN MUMBAIIndependentHotel Bandra ResidencyGuru Nanak Road, Near Bandra Railway Station, Bandra (W), Mumbai - 400 050Tel.: 26425399/26456032 or 26456026 Fax: 26400925NAVI MUMBAIIndependentHotel Heritage DakshinSai Chambers, Sector 11, Opp C.B.D Belapur station (E), Navi Mumbai - 400 614Tel.: 2756 0202 Fax: 2756 0202IndependentHotel Sai NidhiPanchsheel Plaza, Plot.No. 36, Sector-5, Airoli, Navi Mumbai - 400 708Tel.: 27697887IndependentHotel South CoastRX 31, MIDC, Thane Belapur Road, Opp.Rabale Railway Station, Navi Mumbai - 400 701Tel.: 27696000 Fax:27698181IndependentVenkat PresidencyPlot No. 29, Sector 6A, Next to M.G. M. Hospital, Kamothe, Navi Mumbai - 410 209.Tel.: 27424848/2266 Fax: 27425544IndependentHotel Three StarHiranandani Crystal Plaza, Sector-7, Kharghar, Navi Mumbai - 410 210Tel.: 27561144 Fax:2756221IndependentHotel Royal, SanpadaPlot.No-4, Sector-23, Opp Sanpada Railway Station,Mumbai-Pune Highway, Navi MumbaiTel.: 65101254 or 27834863 Fax: 27617804Note: For rates request you to contact the Hotels directly for latest detailed informations & confimed bookings.
sLIST OF SITRAIN - INDIA TRAINING CENTERS(including Authorized Training Centers, ATCs)1.SITRAIN India (Kalwa)Siemens Training CentreTSDC, Kalwa WorksThane-Belapur RoadThane - 400601Contact: Ms. Avanti SatamPhone: 022 27623208 / 8087Email: customer.training.in@siemens.com2.ATC-WEST (Navi-Mumbai)Esskay ServicesBlock No. 801-802, B WingTechno City Plot No. X-4/1 & X-4/2TTC Inductrial Area, MahapeNavi Mumbai - 460710Contact: Ms. Pratiksha KadamPhone: 022-27788403Email: mumtc@esskay.in3.ATC-CENTRAL (Nagpur)Artech SolutionsRaj SahaydriHingna T-PointNagpur - 440032Contact : Mr. Ritesh AgrawalPhone:0712-2243338Email: artech.nagpur@gmail.com4.ATC-EAST (Kolkata)ESSKAY SERVICESDankuni, Hooghly-712311Contact: Ms. Piu ChaudhariPhone: 033-26590258Email: koltc@esskay.in5.ATC-NORTH 1 (Panchkula)Industrial Automation Training Centre178, Phase II,Industrial Area, Panchkula - 134113Haryana (India)Contact : Ms. Ranjit KaurPhone: 0172-5044417Email: iatc@iagautomation.in6.ATC-NORTH 2 (Jaipur)Johns Electric Company Private LimitedC-25(B), Malviya Industrial Area,Jaipur - 302017Rajasthan, India.Contact : Ms. Prachi BahrgavaPhone: 91-141-2751694/3577.ATC - SOUTH 1 (Coimbatore)Karunya-Siemens CentreKarunya UniversityKarunya NagarCoimbatore - 641114Contact: Dr. V. JegathesanPhone: 0422 - 2614400 / 4399Email: siemens@karunya.edu8.ATC-SOUTH 2 (Hyderabad)Esskay Technologies9-10-13, 2nd FloorSiddam ShettyComplex, Above Canara BankOpposite Raymond Showroom, ParklaneSecunderabad - 500003Contact: ChandradharPhone:-040-66776353 / 040-66386352Email: hyd@esskay.in9.ATC - SOUTH 3 (Chennai)Vi- Microsystems Pvt. Ltd.Plot No. 75, Electronics EstatePerungudiChennai - 600096Contact: Mr. Vijay BabuPhone: 044 4204753610.Christiani SharplineTechnical Training (P) Ltd. (Kalwa)Plot No. 19TTC Industrial AreaVishnu Nagar, Digha,Navi Mumbai - 400708Contact: Ms. SaritaPhone: 022- 39154101 / 10511.Siemens M/C Tools Drives Training (Bangalore)Competency Development Center#49, 2nd Floor, Jyoti Mahal BuildingSt. Marks Road, BangalorePhone: 080-33422665Contact: Ms. Shwetha R.Email: mctraining.in@siemens.com
sTrai
s SITRAIN India (Siemens Training, Industry Sector) I-CS-VS-SITRAIN, TSDC-Kalwa The application of highly sophisticated technology will be beneficial only if people (including all our customers) are trained to use all its features and functions, that are particularly important for organizations.
Transmitter (SITRAIN PDS-111), Temperature transmitter (SITRAIN TH400), Flow Transmitters (SITRAIN Mass 6000, SITRAIN Mag 5000 and SITRAIN FUS 060), Level . India. Visited CNC Programming and Machine Lab, Siemens COE, JNTUA. Significance of the Lab:
Katja Binder Telefon: 0711 6521-2459 E-Mail: sitrain.sdw.de@siemens.com Kundenberatung Ulm Siemens AG RC-DE DI CS TA 2 Lise-Meitner-Straße 13 89081 Ulm Susanne Rehm Telefon: 0731 40713-201 E-Mail: sitrain.sdw.de@siemens.com Kundenberatung Chemnitz Siemens AG RC-DE DI CS TA 1 Clemens-Wink
SIEMENS – SITRAIN INDIA TRAINING CENTER List of courses on Low Voltage Power Distribution products and solutions Sr. No. Title Days 1 LV Switchgear Products & 4 Maintenance 2 LV Power Distribution Systems 2 3 Communication Solution in 2 Power Distribution 4 Basic Automation for 3 Switchgear User 5 Energy Management Solutions 2 6 Sentron Power .
Council For Scientific And Industrial Research - CSIR, India Government of India, India Indian Council of Medical Research, India Indian Department of Atomic Energy, India Ministry of Electronics and Information Technology of India, India Ministry of Health and Family Welfare of India, India Ministry of Science and Technology of India, India
SITRAIN INDIA, KALWA. List of courses at SITRAIN-Kalwa & Authorized Training Centers (ATC) Sr. No. Title Days 1 PLC : SIMATIC S7-200 5 2 PLC : TIA Basic with SIMATIC S7-300 & Step7 8 3 PLC : TIA Advanced with SIMATIC S7-400 6 4 SIMATIC NET 5 5 SIMATIC WinCC 6 6 SIMATIC HMI Panels 3 7 DCS: SIMATIC PCS 7 Basic 8 8 DCS: SIMATIC PCS 7 Advanced 10
SIEMENS – SITRAIN INDIA TRAINING CENTER List of courses at SITRAIN-Kalwa & Authorized Training Centers (ATC) Title Course Code Days Training Programmes on Automation Products PLC: SIMATIC S7-200 AS200 5 Simatic S7-1200 with Step-7 Basic AS1200 3 PLC: TIA Basic with SIMATIC S7-300 & Step7 AS300 8 PLC: TIA Basic with Simatic S7-400 & Step 7 AS400 8
SIEMENS – SITRAIN INDIA TRAINING CENTER List of courses at SITRAIN-Kalwa & Authorized Training Centers (ATC) Title Course Code Days Training Programmes on Automation Products SIMATIC S7-200 AS 200 5 SIMATIC S7-1200 with STEP7 V13 AS 1200 4 SIMATIC S7-300 Basic with STEP7 V5.5 AS 300 8 SIMATIC S7-400 Basic with STEP7 V5.5 AS 400 8
Business-Level Strategies 23.11.2010 4. What is a Strategic Business Area? Demand Demand potential (size, growth rate, market share) Customers Customer potential customer structure, buying motives and criteria) Competition Structure of the competition, the competitors' objectives and strategies, competitive position Specific resources and competences (the strategic capabilities) Organisation .
