Full-Featured E Series Multifunction DAQ 12 Or 16-Bit, Up .
Full-Featured E Series Multifunction DAQ12 or 16-Bit, up to 1.25 MS/s, up to 64 Analog InputsFull-Featured E Series Multifunction DAQE Series – Full-Featured 16 or 64 analog inputs at up to1.25 MS/s, 12 or 16-bit resolution 2 analog outputs at up to 1 MS/s,12 or 16-bit resolution 8 digital I/O lines (TTL/CMOS);two 24-bit counter/timers Analog and digital triggering 14 or 15 analog input signal ranges NI-DAQ driver simplifiesconfiguration and measurementsFamilies NI 6071E NI 6070E NI 6062E NI 6052E NI 6040E NI 6033E NI 6032E NI 6031E NI 6030E NI 6020E (only digital triggering)BusPCI, PXIPCI, PXI, FireWirePCMCIAPCI, PXI, FireWirePCI, PXIPCIPCIPCI, PXIPCI, PXINI USBAnalogInputs64 SE/32 DI16 SE/8 DI16 SE/8 DI16 SE/8 DI16 SE/8 DI64 SE/32 DI16 SE/8 DI64 SE/32 DI16 SE/8 DI16 SE/8 DIInputResolution12 bits12 bits12 bits16 bits12 bits16 bits16 bits16 bits16 bits12 bits Windows 2000/NT/XP Real-time performance withLabVIEW (page 134) Others such as Linux and Mac OS X(page 187)Recommended Software LabVIEW LabWindows/CVI Measurement Studio VI LoggerOther Compatible Software Visual Basic, C/C , and C#Driver Software (included) NI-DAQ 7Calibration Certificate IncludedSee page 21.MaxSampling Rate1.25 MS/s1.25 MS/s500 kS/s333 kS/s500 kS/s100 kS/s100 kS/s100 kS/s100 kS/s100 kS/sInputRange 0.05 to 10 V 0.05 to 10 V 0.05 to 10 V 0.05 to 10 V 0.05 to 10 V 0.1 to 10 V 0.1 to 10 V 0.1 to 10 V 0.1 to 10 V 0.05 to 10 VAnalogOutputs2222200222OutputResolution12 bits12 bits12 bits16 bits12 bits16 bits16 bits12 bitsOutputRate1 MS/s1 MS/s850 kS/s333 kS/s1 MS/s100 kS/s100 kS/s20 S/sOutputRange 10 V 10 V 10 V 10 V 10 V 10 V 10 V 10 VDigital I/O8888888888Counter/Timers2, 24-bit2, 24-bit2, 24-bit2, 24-bit2, 24-bit2, 24-bit2, 24-bit2, 24-bit2, 24-bit2, 24-bitTriggersAnalog, digitalAnalog, digitalAnalog, digitalAnalog, digitalAnalog, digitalAnalog, digitalAnalog, digitalAnalog, digitalAnalog, digitalDigitalTable 1. NI Full-Featured E Series Model Guide (See page 228 for detailed specifications.)Overview and ApplicationsHighly Accurate Hardware DesignNI Full-Featured E Series devices are the fastest and the most accuratemultiplexed data acquisition devices available. They are ideal forapplications ranging from continuous high-speed data logging tocontrol applications to high voltage signal or sensor measurementswhen used with NI signal conditioning. Synchronize the operationsof multiple devices using the RTSI bus or PXI trigger bus and easilyintegrate other hardware such as motion control and machine visionto create an entire measurement and control system.NI Full-Featured E Series DAQ devices includethe following featuresand technologies:Visit ni.com/oem for information on ourquantity discounts for OEM customers.Data Acquisition andSignal ConditioningFamilyNI 6071ENI 6070ENI 6062ENI 6052ENI 6040ENI 6033ENI 6032ENI 6031ENI 6030ENI 6020EOperating SystemsTemperature Drift Protection Circuitry – Designed with componentsthat minimize the effect of temperature changes on measurements toless than 0.0006% of reading per C.Resolution-Improvement Technologies – Carefully designed noisefloor maximizes resolution.Onboard Self-Calibration – Precise voltage reference includedfor calibration and measurement accuracy. Self-calibration iscompletely software controlled, with no potentiometers to adjust.NI DAQ-STC – Timing and control ASIC designed to provide moreflexibility, lower power consumption, and a higher immunity to noiseand jitter than off-the-shelf counter/timer chips.National Instruments Tel: (800) 433-3488 Fax: (512) 683-9300 info@ni.com ni.com199
Full-Featured E Series Multifunction DAQFull-Featured E Series Multifunction DAQ12 or 16-Bit, up to 1.25 MS/s, up to 64 Analog InputsNI MITE – ASIC designed to optimize data transfer for multiplesimultaneous operations using bus mastering with three scattergather DMA channels for maximum performance of concurrentI/O operations.High-Performance Driver Engine – Software-timed single-pointinput (typically used in control loops) with NI-DAQ achievesrates of up to 50 kHz. NI-DAQ also delivers maximum I/Osystem throughput with a multithreaded driver.NI PGIA – Measurement and instrument class amplifier thatguarantees settling times at all gains. Typical commercial off-theshelf amplifier components do not meet the settling timerequirements for high-gain measurement applications.Test Panels – With NI-DAQ, you can test all of your devicefunctionality before you begin development.PFI Lines – Eight programmable function input (PFI) lines thatcan be used for software-controlled routing of interboard andintraboard digital and timing signals.RTSI or PXI Trigger Bus – Used to share timing and control signalsbetween devices and synchronize operations.Data Acquisition andSignal ConditioningRSE Mode – In addition to differential and nonreferenced singleended modes, NI full-featured E Series devices offer referencedsingle-ended (RSE) mode for use with floating signal sources inapplications with channel counts higher than eight.Onboard Temperature Sensor – Included for monitoring theoperating temperature of the device to ensure that it is operatingwithin the specified range.Scaled Channels – Easily scale your voltage data into the properengineering units using the NI-DAQ Measurement Ready virtualchannels by choosing from a list of common sensors and signals orcreating your own custom scale.LabVIEW Integration – All NI-DAQ functions use the waveform datatype, which carries acquired data and timing information directlyinto more than 400 LabVIEW built-in analysis routines for display ofresults in engineering units on a graph.Worldwide Support and ServicesNI provides you with a wealth of resources to help you get yourapplication up and running more quickly, including:Technical Support – Purchase of NI hardware or software gives youaccess to application engineers all over the world as well as Webresources with more than 3,000 measurement examples and morethan 9,000 KnowledgeBase entries. – ni.com/supportAnalog and Digital Triggering – Only full-featured E Series devicesprovide the ability to set a trigger based on the level of an analogsignal, in addition to the ability to trigger off an edge of adigital signal.NI Factory Installation Services (FIS) – Software and hardwareinstalled in PXI and PXI/SCXI systems, tested and ready touse – ni.com/advisorMore Input Ranges – Up to 15 input ranges for optimal resolution,even for signals smaller than 50 mV.Calibration – Includes NIST-traceable basic calibration certificates,services for ANSI/NCSL-Z540 and periodic calibration –ni.com/calibrationHigh-Performance, Easy-to-Use Driver Software200NI-DAQ is the robust driver software that makes it easy to access thefunctionality of your data acquisition hardware, whether you are abeginning or advanced user. Helpful features include:Extended Warranty – Meet project life-cycle requirementsand maintain optimal performance in a cost-effective way –Automatic Code Generation – DAQ Assistant is an interactive guidethat steps you through configuring, testing, and programmingmeasurement tasks, and generating the necessary code automaticallyfor use in LabVIEW, LabWindows/CVI, or Measurement Studio.Data Acquisition Training – Instructor-led courses – ni.com/trainingCleaner Code Development – Basic and advanced software functionshave been combined into one easy-to-use yet powerful set to helpyou build cleaner code and move from basic to advancedapplications without replacing functions.For more information on NI services and support,please visit ni.com/servicesni.com/servicesProfessional Services – Feasibility, consulting, and integrationthrough our Alliance Partners – ni.com/allianceFor information on device support inNI-DAQ 7, visit ni.com/dataacquisitionNational Instruments Tel: (800) 433-3488 Fax: (512) 683-9300 info@ni.com ni.com
Full-Featured E Series Multifunction DAQ12 or 16-Bit, up to 1.25 MS/s, up to 64 Analog InputsNI 6030E, NI 6031E,NI 6032E, NI 6033EMeasurement Sensitivity* (mV)0.0023Nominal Range (V)Positive FSNegative 0980.100.059Full-Featured E SeriesNI 6052ENI 6070E, NI .3912.1671.0920.5580.2350.127NI 6040E0.008Low-Cost E SeriesNI 6034E, NI 6036ENI 6023E, NI 6024E,NI 6025E0.00360.008Absolute Accuracy �–BasicPCI-6013, 9–––––––Full-Featured E Series Multifunction DAQModelsNote: Accuracies are valid for measurements following an internal calibration. Measurement accuracies are listed for operational temperatures within 1 C of internal calibration temperature and 10 C of external or factory-calibration temperature. One-yearcalibration interval recommended. The Absolute Accuracy at Full Scale calculations were performed for a maximum range input voltage (for example, 10 V for the 10 V range) after one year, assuming 100 pt averaging of data.*Smallest detectable voltage change inthe input signal at the smallest input range.Table 2. E Series Analog Input Absolute Accuracy SpecificationsModelsNI 6030E, NI 6031E,NI 6032E, NI 6033E1.431.2011.4051.176NI 6040ELow-Cost E SeriesPCI-6036EPCI-6024E, NI 6025E,Absolute Accuracy (mV)8.1272.4175.685–8.1275.6858.127–BasicNI 6013, NI 60143.835–Table 3. E Series Analog Output Absolute Accuracy SpecificationsRecommended AccessoriesOrdering InformationSignal conditioning is required for sensor measurements or voltageinputs greater than 10 V. National Instruments SCXI is a versatile,high-performance signal conditioning platform, intended for highchannel-count applications. NI SCC products provide portable,flexible signal conditioning options on a per-channel basis. Bothsignal conditioning platforms are designed to increase theperformance and reliability of your DAQ System, and are up to 10Xmore accurate than terminal blocks (please visit ni.com/sigcon formore details). Refer to the table below for more information:NI PXI-6071E .777676-01NI PCI-6071E .777515-01NI PXI-6070E .777060-01NI PCI-6070E .777305-01NI DAQPad-6070E for FireWire .(See page 207)NI DAQCard-6062E .(See page 207)NI PXI-6052E .777962-01NI PCI-6052E .777745-01NI DAQPad-6052E for FireWire .(See page 207)NI PXI-6040E .777484-01NI PCI-6040E .777383-01NI PCI-6033E .777516-01NI PCI-6032E .777422-01NI PXI-6031E .777636-01NI PCI-6031E .777514-01NI PXI-6030E .777555-01NI PCI-6030E .777384-01NI DAQPad-6020E for USB .(See page 207)Sensor/Signals ( 10 V)System DescriptionDAQ DeviceHigh performancePCI-60xxE, PXI-60xxE, DAQPad-60xxELow-cost, portablePCI-60xxE, PXI-60xxE, DAQPad-60xxESignals ( 10 V)1System dLow-CostLow-CostSignal ConditioningSCXISCCDAQ DeviceTerminal 031ETwo 70251Page2142142142142142142141Terminal Blocks do not provide signal conditioning (ie. filtering, amplification, isolation, etc.), which may be necessary toincrease the accuracy of your measurements.Data Acquisition andSignal ConditioningNominal Range (V)Positive FSNegative FS10-10100Full-Featured E SeriesNI 6052ENI 6070E, NI 6071EIncludes NI-DAQ driver software and calibration certificate.For more information on warranty and value-added services,see page 20.BUY ONLINE!Visit ni.com/dataacquisitionTable 4. Recommended AccessoriesNational Instruments Tel: (800) 433-3488 Fax: (512) 683-9300 info@ni.com ni.com201
Multifunction DAQ OverviewMultifunction DAQ er12 or 16-BitADCCHXAmplifierAntiAliasingFilter12 or 16-BitADCI/O ConnectorAnalogTriggerCircuitryNI MITEBusInterfaceAITiming/ControlDMA/INTRequestTwo 24-BitCounter/TimersNIDAQ-STCBusInterfaceDigital I/O(8)AO Timing/ControlRTSI/PXITrigger BusDI FIFODO FIFORTSI/PXI Trigger BusPFIDigital/AnalogTriggerDAC 0Data Acquisition andSignal ConditioningAO FIFOOn SelectedS Series DevicesCalibrationDACDAC 1Figure 1. S Series Hardware Block DiagramCalibrationDAC16AnalogInputMuxes12 or 16-bitADCAI FIFONI MITEBusInterfaceAITiming/ControlDMA/INTRequestTwo 24-bitCounter/TimersNIDAQ-STCBusInterfaceDigital I/O(8)AO Timing/ControlRTSI/PXITrigger BusRTSI/PXI Trigger BusPFIDigital/AnalogTriggerDAC 0AO FIFODAC 1CalibrationDACPCI/PXI BusI/O ConnectorAnalogTriggerCircuitryNIPGIADI FIFODO FIFOOn Selected ESeries DevicesFigure 2. E Series Hardware Block Diagram190PCI/PXI BusAI FIFONational Instruments Tel: (800) 433-3488 Fax: (512) 683-9300 info@ni.com ni.com
16-Bit E Series Specifications16-Bit E Series MultifunctionDAQ SpecificationsSpecifications – NI 6052E and NI 603xEThese specifications are typical for 25 C unless otherwise noted.Analog InputAccuracy specifications . See page 228.Input Number of Channels16 single-ended or 8 differential(software selectable per channel)64 single-ended or 32 differential(software-selectable per channel)Resolution. 16 bits, 1 in 65,5366052E6034E6036E6030E6031E6032E6033EMaximum Sampling Rate333 kS/s200 kS/sData Acquisition andSignal Conditioning6030E6031E6032E6033E6034E6036EInput coupling.Maximum working voltage(signal common mode) .Overvoltage protectionPowered on.Powered off .238Bipolar Input Range 10 V 5 V 2.5 V 1 V 500 mV 250 mV 100 mV 50 mV 10 V 5 V– 2 V 1 V 500 mV– 200 mV 100 mV– 10 V 5 V 500 mV 50 mVUnipolar Input Range–0 to 10 V0 to 5 V0 to 2 V0 to 1 V0 to 500 mV0 to 200 mV0 to 100 mV–0 to 10 V0 to 5 V–0 to 2 V0 to 1 V0 to 500 mV–0 to 200 mV0 to 100 mV––––DCEach input should remain within 11 V of ground 25 V 15 VFIFO buffer size .Data transfersPCI, PXI .DAQCard .DMA modesPCI, PXI .Configuration memory size .512 samples, (1024 samples for DAQCard)DMA, interrupts, programmed I/OInterrupts, programmed I/OScatter-gather (single transfer, demand transfer)512 wordsRelative accuracy (dithered)100 kS/sRange Software Selectable20 V10 V5V2V1V500 mV200 mV100 mV20 V10 V5V4V2V1V500 mV400 mV200 mV100 mV20 V10 V1V100 mVAI 0.63 , AI SENSE,AI SENSE2Transfer CharacteristicsInput signal rangesDevice6052EInputs ProtectedAI 0.15 , AI pical 1.5 LSBMaximum 3 LSB 0.75 LSB 1 LSB 3.0 LSB 6 LSBDNLDevice6052E603xE(except DAQCard-6036E)DAQCard-6036ETypical 0.5 LSBMaximum 1 LSB 1.0 LSB 4, -2 LSBNo missing codesDAQCard 6036E . 15 bits, guaranteedOthers . 16 bits, guaranteedAmplifier CharacteristicsInput impedanceDevice6052E603xENormal Powered On100 GΩ in parallelwith 100 pFPowered Off820 ΩOverload820 ΩInput bias and offset 3EDAQCard-6036ENational Instruments Tel: (800) 433-3488 Fax: (512) 683-9300 info@ni.com ni.comBias Current 200 pAOffset Current 100 pA 1 nA 2 nA 800 pA 100 pA
16-Bit E Series MultifunctionDAQ Specifications16-Bit E Series SpecificationsSpecifications – NI 6052E and NI 603xE (continued)Analog OutputCMRR, DC to 60 ge20 V10 V5V2V100 mV to 1 V20 V10 V5V4V2V1V100 mV to 500 mV20 V10 V1V100 mVBipolar ar utput Characteristics6052E6030E6031E6036E6032E, 6033E, RangeAll rangesAll rangesSmall Signal (-3 dB)480 kHz255 kHzAll ranges413 5.00.60.71.12.0–0.81.06.21.56052E, 6030E, 6031E6036ETransfer 6033E6034E6036EDAQCard-6036E 0.0061% 0.024%( 4 LSB) ( 16 LSB)4 µs max 3 µs max4 µs max 3 µs max4 µs max 3 µs max4 µs max 3 µs max10 µs max–All50 µs max25 µs max–10 µs max–1 to 20 V100 mV10 V––––––5 µs max–5 µs max–5 µs nt Channels-75 dBAll Other Channels-90 dBRelative Accuracy 0.35 LSB typical, 1 LSB maximum 0.5 LSB typical, 1 LSB maximum 2 LSB maximumDNL. 1.0 LSB maximumMonotonicity6052E16 bits, guaranteed6036E6030E6031ESettling time to full-scale stepDevice6052EFIFO Buffer Size2,048 samplesNoneData transfersPCI, PXI . DMA, interrupts, programmed I/ODAQCard . Interrupts, programmed I/ODMA modesPCI, PXI . Scatter-gather (single transfer,demand �–––Accuracy 0.00076% 0.0015% 0.0031%Range( 0.5 LSB) ( 1 LSB)( 2 LSB)2 to 20 V–10 µs max5 µs max1V–15 µs max5 µs max200 to 500 mV–15 µs max10 µs max100 mV–15 µs typical 10 µs typicalAll40 µs max 20 µs max–1 kS/s, system dependentData Acquisition andSignal Conditioning6030E6031E6032E6033ERange2 to 20 V1V500 mV200 mV100 mV2 to 20 V1V400 to 500 mV200 mV100 mV10 to 20 V1V100 mV10 to 20 VMaximum Update Rate333 kS/s10 kS/s, system dependent100 kS/sType of DAC. Double buffered, multiplyingSystem noise (LSBrms, including quantization)Device6052ENoneResolution16 bits, 1 in 65,5366052E6036E6030E6031EDynamic CharacteristicsDevice6052E6030E, 6031E,6032E, 6033E6034E, 6036ENumber of Channels2 voltage outputsVoltage Output6052E6030E6031E6036ERanges 10 V, 0 to 10 V, EXTREF, 0 to EXTREF; software selectable 10 V, 0 to 10 V; software selectable 10 VOutput coupling . DCOutput impedance . 0.1 Ω maximumCurrent drive. 5 mA maximumProtection . Short-circuit to groundPower-On State6052E0 V ( 20 mV)6030E6031EPCI-6036E0 V ( 44 mV)DAQCard-6036E0 V ( 60 mV)National Instruments Tel: (800) 433-3488 Fax: (512) 683-9300 info@ni.com ni.com239
16-Bit E Series Specifications16-Bit E Series MultifunctionDAQ SpecificationsSpecifications – NI 6052E and NI 603xE (continued)External reference input (6052E only)Range.Overvoltage protection .Input impedance .Bandwidth (-3 dB).Slew rate . 11 V 25 V powered on, 15 V powered off10 kΩ3 kHz0.3 V/µsDynamic CharacteristicsSettling time and slew rateDeviceSettling Time For Full-Scale Step6052E3.5 µs to 1 LSB accuracy6030E10 µs to 1 LSB accuracy6031EPCI-6036E5 µs to 1 LSB accuracyDAQCard-6036E5 µs to 4.5 LSB accuracySlew Rate15 V/µs5 V/µs15 V/µs5 V/µsTriggersAnalog Triggers6052E6030E6031E6032E6033E6034E6036E60 µVrms, DC to 1 MHz6052E6030E6032E6031E6033E110 µVrms, DC to 400 kHz160 µVrms, DC to 400 kHzGlitch energy (at mid-scale transition)Device6052EPCI-6036EMagnitude 10 mV 10 mVDuration1 µs1 µsData Acquisition andSignal ConditioningDigital I/ONumber of channels.Compatibility .Power-on state .Data transfers .Digital logic levelsLevelInput low voltageInput high voltageOutput low voltage (Iout 5 mA)Output high voltage (Iout -3.5 mA)Minimum0.0 V2.0 V–4.35 VMaximum0.8 V5.0 V0.4 V–Timing I/OGeneral-Purpose Up/Down Counter/TimersNumber of channelsUp/down counter/timers .Frequency Scaler .ResolutionUp/down counter/timers .Frequency Scaler .Compatibility .Digital logic levelsBase clocks availableUp/down counter/timers .Frequency Scaler .Base clock accuracy .Maximum external source frequencyUp/down counter/timers .External source selections .External gate selections.Minimum source pulse duration .Minimum gate pulse duration.Data transfersPCI/PXI Up/down counter/timer.DAQCard Up/down counter/timer.Frequency Scaler .2408 input/output5 V/TTL/CMOSInput (high impedance)Programmed I/O2124 bits4 bits5 VTTL/CMOSNonePurposeAnalog input . Start and stop trigger, gate, clockAnalog output . Start trigger, gate, clockGeneral-purpose counter/timers . Source, er of Triggers1SourceAI 0.15 , PFI 0/AI START TRIGAI 0.63 , PFI 0/AI START TRIGLevelInternal source, AI 0.15/63 .External source, PFI 0/AI START TRIG .Slope.Resolution.Hysteresis.Bandwidth (-3 dB)Device6052EPCI-6030E, PCI-6031E, 6032E, 6033EPXI-6030E, PXI-6031E full-scale 10 VPositive or negative; software-selectable12 bits, 1 in 4,096ProgrammableInternal SourceAI O.15/63 700 kHz255 kHz255 kHzExternal SourcePFI O/AI START TRIG700 kHz4 MHz255 kHzAccuracy . 1% of full-scale range maximumDigital Triggers (all devices)PurposeAnalog input . Start and stop trigger, gate, clockAnalog output . Start trigger, gate, clockGeneral-purpose counter/timers . Source, gateSource.Compatibility .Response .Pulse width.20 MHz and 100 kHz10 MHz and 100 kHz 0.01%20 MHzPFI 0.9 , RTSI 0.6 , analog trigger; software selectablePFI 0.9 , RTSI 0.6 , analog trigger; software selectable10 ns, edge-detect mode10 ns, edge-detect modeDMA (scatter-gather), interrupts, programmed I/OInterrupts, programmed I/OProgrammed I/ONational Instruments Tel: (800) 433-3488 Fax: (512) 683-9300 info@ni.com ni.comPFI 0.9 , RTSI 0.6 5 VTTLRising or falling edge10 ns minimum
16-Bit E Series MultifunctionDAQ SpecificationsExternal Input for Digital or Analog Trigger (PFI 0/AI START TRIG)(6052E, 6033E, 6032E, 6031E, 6030E only)Impedance .Coupling.ProtectionDigital trigger .Analog triggerOn/off/disabled.Power Requirements1DevicePCI-6052E, PXI-6052E6030E, 6031E,6032E, 6033E6034EPCI-6036EDAQCard-6036E10 kΩDC-0.5 to Vcc 0.5 V 35 VCalibrationDC Level5.000 V ( 1.0 mV)0.9 A 4.65 to 5.25 VDC, 1 A300 mA 4.65 to 5.25 VDC, 0.75 APhysical1Dimensions (not including connectors)1Over full operating temperature,actual value stored in EEPROM5.000 V ( 3.5 mV)Temperature Coefficient6052E, 6030E, 0.6 ppm/ C max6031E, 6032E,6033E6034E, 6036E 5.0 ppm/ C max6052E, 6030E6031E, 6032E,6033E6034E, 6036EPower Available at I/O Connector 4.65 to 5.25 VDC, 1 A 4.65 to 5.25 VDC, 1 ADAQPad-6052E . 20W @ 9-24 VDCRecommended warm-up time. 15 minutes; 30 minutes for DAQCardCalibration Interval. 1 yearOnboard calibration reference6052E, 6030E.6031E, 6032E,6033E6034E, 6036E 5 VDC ( 5%)1.3 A1.5 ALong-Term Stability 6.0 ppm/ 1000 hPCI.PXI.DAQCard.DAQPad d-6036EDAQPad-6052E17.5 by 10.6 cm (6.9 by 4.2 in.)16.0 by 10.0 cm (6.3 by 3.9 in.)Type II PC Card30.7 by 25.4 by 4.3 cm (12.1 by 10 by 1.7 in.)I/O Connectors68-pin male SCSI-II type 15.0 ppm/ 1000 h100-pin female 0.050 D-type68-position VHDCI female68-pin male SCSI-II type, or15 BNCs and 30 removeablescrew terminalsEnvironmentTrigger lines. 6Star trigger . 1Operating temperature6052E, 6036E, 6034E.6030E, 6031E, 6032E, 6033E.Storage temperature .Relative humidity .Bus InterfaceCertifications and CompliancesPCI, PXI . Master, slaveDAQCard. SlaveDAQPad . Master, slave, asynchronous, 400 Mb/sCE Mark CompliancePXI Trigger Bus (PXI only)1See0 to 55 C0 to 50 C-20 to 70 C10 to 90%, noncondensingData Acquisition andSignal ConditioningRTSITrigger linesPCI. 7DAQPad. 416-Bit E Series SpecificationsSpecifications – NI 6052E and NI 603xE (continued)page 134 for RT Series device power requirements and physical parameters.National Instruments Tel: (800) 433-3488 Fax: (512) 683-9300 info@ni.com ni.com241
Cables and Accessories Selection GuidesMultifunction DAQ Cable andAccessory Selection GuidesNI Cable Design AdvantagesThe SH68-68-EP cable is the most commonly used E Series andS Series cable. The cable is designed to work specifically with theNI Multifunction DAQ devices to preserve signal integrity throughthese technologies:Seperate digital andanalog sectionsTwisted pairs forcritical digital I/OIndividually-shieldedtwisted pairs forall analog inputsLarge (20 AWG) conductorfor 5V LinesFigure 2. NI offers a wide varietyDouble ground shieldof cable and accessory options,Individually-shieldedanalog outputssuch as the SH68-68-EP cablePVC jacketand the BNC-2110 terminal block.Figure 1. SH68-68-EP CableData Acquisition andSignal ConditioningA variety of cabling and accessory options are available for yourneeds. Use the following tables to choose the most appropriate cablesand accessories. To determine which Multifunction DAQ device bestfits your needs, please see page 189.PlatformPCI/PXI/USB/FireWireShieldingConnect to .CableAdapterAccessoryShieldedSH68-68-EP–SC-2345 and modules, page 251SCXI-1349–SCXI Chassis and Modules, page 270ShieldedShieldedShieldedShieldedUnshieldedSCC portable signalconditioning per channelSCXI high-performancesignal conditioningScrew terminals 1BNC terminal block50-pin connectorConfigurable connectivity boxScrew terminals 1SH68-68-EP or ��––Unshielded50-pin connectorR6850–SCB-68BNC-2110, BNC-2120, BNC-2090CB50, custom or 3rd partyCA-1000, page 351TBX-68, CB-68LP, CB-68LPR,DAQ signal accessoryCB50, custom or 3rd partyShieldedFront-mounted screw terminalsN/A–TB-2705SCB-68, CA-1000CB50, custom or 3rd partyTBX-68, CB-68LP, CB-68LPR,DAQ signal accessoryCB50, custom or 3rd partyShieldedPXI onlyPCMCIA1 Unshieldedterminals 1SHC68U-68-EP 2ShieldedShieldedUnshieldedScrew50-pin connectorScrew terminals 1SHC68-68-EP orSHC68-68-EP or SHC68U-68-EP 2RC68-68–68M-50F MIOUnshielded50-pin connectorRC68-6868M-50F MIOcables can connect to shielded accessories and vice-versa. 2 In adjacent PCMCIA slots, both cables
200 National Instruments Tel: (800) 433-3488 Fax: (512) 683-9300 info@ni.com ni.com Full-Featured E Series Multifunction DAQ Data Acquisition and Signal Conditioning Full-Featured E Series Multifunction DAQ 12 or 16-Bit, up to 1.25 MS/s, up to 64 Analog Inputs
Dell Multifunction Printer E515dw Dell Multifunction Printer E515dn Dell Multifunction Printer E514dw User’s Guide Regulatory Model: Dell E515dw / E515dn / E514dw
SMB_Dual Port, SMB_Cable assembly, Waterproof Cap RF Connector 1.6/5.6 Series,1.0/2.3 Series, 7/16 Series SMA Series, SMB Series, SMC Series, BT43 Series FME Series, MCX Series, MMCX Series, N Series TNC Series, UHF Series, MINI UHF Series SSMB Series, F Series, SMP Series, Reverse Polarity
Optional Features Equitrac Express , Equitrac Office , YSoft SafeQ , other network accounting solutions available through various Xerox Business Innovation Partners Xerox WorkCentre 7830i/7835i/ 7845i/7855i Color Multifunction Printer The WorkCentre 7800i Series Color Multifunction Printer is
Xerox WorkCentre 7800 Series Multifunction System Transform the way you work. WorkCentre 7830/7835/7845/7855 A3 Colour Multifunction System TITLE: X_26337_W78BR-01EC LANGUAGE: Englis
Xerox WorkCentre 7220/7225 Multifunction Printer Meet today’s tasks, build tomorrow’s opportunities. Xerox WorkCentre 7220/7225 A3 Colour Multifunction Printer TITLE: X_27187_W
VPN Router High-Performance, Multifunction Connectivity Product Overview The Cisco RV130W Wireless-N Multifunction VPN Router is an easy-to-use, flexible, high-performance device well suited for small businesses. It delivers highly secure, broadband, wired and wir
NI Multifunction I/O Devices provide a combination of analog I/O, digital I/O, and counter/timer . USB-6001 8 no 20 kS/s 14 bits 26 mV 2 5 kS/s 13 1 ST USB-6000 8 no 10 kS/s 12 bits 26 mV 0 - 4 1 ST . Page 4 ni.com Multifunction I/O Table 2. NI P
Alfredo López Austin “Rayamiento (Tlahuahuanaliztli)” p. 15-22 : Juegos rituales aztecas Alfredo López Austin (versión, introducción y notas) México Universidad Nacional Autónoma de México . Instituto de Investigaciones Históricas : 1967 . 94 p. (Cuadernos Serie Documental 5) [Sin ISBN] Formato: PDF Publicado en línea: 21 de noviembre de 2018 . Disponible en: www.historicas.unam .
