SPECIFICATIONS LU-2200N Series - JUKI
LU-2200N LU-2220N-7LU-2260N-7LU-2260W-71-needle1-needle / 2-pitch dial type1-needle / 2-pitch dial /Shorter thread remaining type2-needleModel name 3,500sti/min＊Max. sewing speed9mm (forward/backward)Max. stitch length6mm (forward/backward)33.8mmNeedle bar strokehigh speedAuto: 16mm, By hand: 9mmMax. lift of the presser foot1mm〜6.5mm (by dial)Alternating vertical movementLink typeThread take-upN: Vertical-axis 1.6 fold-capacity hookW: Vertical-axis double-capacity hookHookN: Vertical-axis 1.6 fold-capacity hookN: Vertical-axis 1.6 fold-capacity hookW: Vertical-axis double-capacity hook134 35R (Nm140) Nm110〜Nm160Needle#20〜#5, B64〜B138, Nm40/3〜20/3#30〜#4, B46〜B138, Nm60/3〜20/3ThreadDistance from needle tomachine armpowerful263.5mmAutomaticLubricationBuilt on the machine headBobbin thread winderSafety mechanismProvided as standardAutomatic reverse feedfunctionProvided as standardProvided as standard (pneumatic auto-lifter)Auto-lifter0.5MPaCompressed air0.763dK/min (ANR)Air consumption1.078dK/min (ANR)1.337dK/min (ANR)0.736dK/min (ANR)55kgWeight of the machine head58kgPower requirementSingle-phase 100〜120V, 200〜240V3-phase 200〜240VPower consumption425VA “sti/min” stands for “Stiches per Minute”JUKI ECO PRODUCTSThe LU-2200N Series is an eco-friendly product which complies with JUKI ECO PRODUCTS standards for protecting the environmentThe sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use ofhazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive.For details of JUKI ECO PRODUCTS, refer to: http://www.juki.co.jp/eco e/index.htmlThe RoHS Directive is an EU Directive limiting the use of 6 hazardous substances (lead, hexavalent chromium, mercury, cadmium, PBB and PBDE) in electrical and electronic equipment.The Juki Green Procurement Guideline is the voluntarily established criteria to eliminate not only the aforementioned six substances, but also other ones which also adversely affect the environment.high performanceRegistered Organization：Head OfficeThe Scope of the Registration：The activities of research,development, design, sales, distribution, and maintenanceservices of industrial sewing machines, household sewingmachines and industrial robots, etc., including sales andmaintenance services of data entry systems.CM001SEWING MACHINERY BUSINESS UNIT2-11-1, TSURUMAKI, TAMA-SHI,TOKYO 206-8551, JAPANPHONE : (81) 42-357-2254FAX : (81) 42-357-2274http://www.juki.com Specifications and appearance are subject to change without prior notice for improvement. Read the instruction manual before putting the machine into service to ensure safety. This catalogue prints with environment-friendly soy ink on recycle paper.LU-2200NSeriesCapabilities for sewing car seats have beensignificantly improved.JULY, 2015 Printed in Japan(A)
LU-2200NEfficiency of feed and sewing capabilitiesfor supporting sewing performance at ahigher speed of 3,500sti/min3 500sti/minHigher lift of the presser footHigh-speed, 1-needle,Unison-feed, Lockstitch Machinewith Vertical-axis Large Hook andAutomatic Thread Trimmer TheThe machine is proprovidedvided as standard with apneumatic auto-lifter. The high, 16mm presser foot lift enables easymaterial handling.The walking foot and presser foot'salternating vertical movement can beset and changed with ease. The vertical strokes of the presser foot and walkingfoot (alternating verticaltical movement)mo ement) can be easilychanged using a large dial mounted on the topsurface of the machine head. InIn addition the sewingsewing speed is automatically adjustedwith the set value.vWith this feature,fideal sewingwingconditions are maintained at all times.timesLU-2210N- 7 1.6 fold-capacity hookLU-2210W-7 Double-capacity hookThe machine demonstrates outstanding performancewhen sewing heavy materials, with its "high-qualityconsistent sewing capabilities", as well as with itsremarkably powerful feed.LU-2210N-716mmThe machine promises outstandingadaptability and ease of use with itsfull-fledged functions.The highly efficient vertical-axis 1.6fold-capacity hook is provided asstandard.High-speed, 2-needle,Unison-feed, Lockstitch Machinewith Vertical-axis Large Hook andAutomatic Thread Trimmer WithWith the adoption of this vverertical-axistical-axis 1.6 ffoldoldcapacity hook, the frequency of bobbin threadwinding is reduced, promising sewing work ofincreased efficiency.LU-2260N-7Instantaneous change-over device forthe alternate vertical movementamount (DL device) is provided asstandard. The alternate vertical movement amount can beinstantaneously maximized in a process for sewing ahard-to-feed part of material, such as a multilayeredpart, finishing with beautiful seams free from stitchgathering. The machine is provided with both a hand switch andknee switch.LU-2260N- 7 1.6 fold-capacity hookLU-2260W-7 Double-capacity hookThe machine is the standard type 2-needle machine,which is essential for topstitching processes.As with the aforementioned 1-needle machine, thestandard 2-needle machine has an outstanding highspeed capability and promises consistent sewingperformance.SeriesPush-button typeBobbin for vertical-axis1.6 fold-capacity hookBobbinfor standard hookKnee switch type
LU-2200NEfficiency of feed and sewing capabilitiesfor supporting sewing performance at ahigher speed of 3,500sti/min3 500sti/minHigher lift of the presser footHigh-speed, 1-needle,Unison-feed, Lockstitch Machinewith Vertical-axis Large Hook andAutomatic Thread Trimmer TheThe machine is proprovidedvided as standard with apneumatic auto-lifter. The high, 16mm presser foot lift enables easymaterial handling.The walking foot and presser foot'salternating vertical movement can beset and changed with ease. The vertical strokes of the presser foot and walkingfoot (alternating verticaltical movement)mo ement) can be easilychanged using a large dial mounted on the topsurface of the machine head. InIn addition the sewingsewing speed is automatically adjustedwith the set value.vWith this feature,fideal sewingwingconditions are maintained at all times.timesLU-2210N- 7 1.6 fold-capacity hookLU-2210W-7 Double-capacity hookThe machine demonstrates outstanding performancewhen sewing heavy materials, with its "high-qualityconsistent sewing capabilities", as well as with itsremarkably powerful feed.LU-2210N-716mmThe machine promises outstandingadaptability and ease of use with itsfull-fledged functions.The highly efficient vertical-axis 1.6fold-capacity hook is provided asstandard.High-speed, 2-needle,Unison-feed, Lockstitch Machinewith Vertical-axis Large Hook andAutomatic Thread Trimmer WithWith the adoption of this vverertical-axistical-axis 1.6 ffoldoldcapacity hook, the frequency of bobbin threadwinding is reduced, promising sewing work ofincreased efficiency.LU-2260N-7Instantaneous change-over device forthe alternate vertical movementamount (DL device) is provided asstandard. The alternate vertical movement amount can beinstantaneously maximized in a process for sewing ahard-to-feed part of material, such as a multilayeredpart, finishing with beautiful seams free from stitchgathering. The machine is provided with both a hand switch andknee switch.LU-2260N- 7 1.6 fold-capacity hookLU-2260W-7 Double-capacity hookThe machine is the standard type 2-needle machine,which is essential for topstitching processes.As with the aforementioned 1-needle machine, thestandard 2-needle machine has an outstanding highspeed capability and promises consistent sewingperformance.SeriesPush-button typeBobbin for vertical-axis1.6 fold-capacity hookBobbinfor standard hookKnee switch type
LU-2200N SeriesATTACHMENTSHigh-speed, 1-needle, Unison-feed, Lockstitch Machinewith Vertical-axis Large Hook and Automatic Thread TrimmerLU-2212N-7DescriptionPart No.Suspended ruler (asm.) H152MAH-152010A0Suspended ruler mounting base (asm.)107-358681.6 fold-capacity hook / 2-pitch dial typeOne of two different stitch lengths can be selectedaccording to the application.The stitch length can be instantaneously changed overby pressing the stitch selector switch mounted on thelower part of the machine arm. Suspended ruler mounting base (asm.) is required to mount the suspended ruler.2P stitch dialINTERCHANGEABLE GAUGE ］［LU-2220N-7］2P switchApplicationWalking footAONStandardPresser footAStandard107-12552StandardKStandard(pressing face is reduced)107-58456OFFStitch sampleStandard stitch: 8mm / 2P stitch: 4mmOperating switch107-11653BAllows the smooth feedof multi-layered portionsof the materialStandard stitch dialBFor heavy-weightspongeUsed for more resilientmaterials[Comparison of the remaining thread length]Upper side: LU-2210N-7 / Lower side: LU-2220N-7Right side of the material atthe beginning of sewingCFor urethaneUsed for resilientmaterials includingsponge1.6 fold-capacity hook / 2-pitch dial / Shorter thread remaining typeThread nipping work required at the beginning and endof sewing is reduced. This is a high-performance machinewhich contributes to both increased productivity andimproved quality for sewing car seats. Frequency of theuse of scissors by the operator is reduced, therebyhelping prevent the material from being damaged.For material withoverlapped section107-12651For light-weight spongeHigh-speed, 1-needle, Unison-feed, Lockstitch Machinewith Vertical-axis Large Hook and Automatic Thread TrimmerLU-2220N-7For material withoverlapped sectionWrong side of the material atthe end of sewing107-11752CThe needle thread doesnot remain on the right Remaining-thread length: 5mmside of the material.DOperating switchNeedle threadclamping at thebeginning of sewingcan be turnedON/OFF.Wide typeTo be used when asewing product cannot besmoothly fedRight single-sided107-12859Left single-sidedELeft For pipingφ3φ4φ5φ6φFor pipingThe position of theneedle can be adjustedaccording to the pipe tobe sewnD107-11851For pipingUsed for the generalpiping processRight single-sided1mmLeft single-sidedpresserUsed for sewing materialedges107-12750ThickRight single-sidedpresserUsed for sewing materialedgesFor djustable presserfor 6659For 107-47657(special order)(special order)107-12057107-13055107-12354A or K or BWithout grooveThe thread trimming mechanism has been totally redesigned toshorten the length of thread remaining on the material at theend of sewing down to 5 mm.To be used when thethread can not begrasped at the sewingstart
LU-2200N SeriesATTACHMENTSHigh-speed, 1-needle, Unison-feed, Lockstitch Machinewith Vertical-axis Large Hook and Automatic Thread TrimmerLU-2212N-7DescriptionPart No.Suspended ruler (asm.) H152MAH-152010A0Suspended ruler mounting base (asm.)107-358681.6 fold-capacity hook / 2-pitch dial typeOne of two different stitch lengths can be selectedaccording to the application.The stitch length can be instantaneously changed overby pressing the stitch selector switch mounted on thelower part of the machine arm. Suspended ruler mounting base (asm.) is required to mount the suspended ruler.2P stitch dialINTERCHANGEABLE GAUGE ］［LU-2220N-7］2P switchApplicationWalking footAONStandardPresser footAStandard107-12552StandardKStandard(pressing face is reduced)107-58456OFFStitch sampleStandard stitch: 8mm / 2P stitch: 4mmOperating switch107-11653BAllows the smooth feedof multi-layered portionsof the materialStandard stitch dialBFor heavy-weightspongeUsed for more resilientmaterials[Comparison of the remaining thread length]Upper side: LU-2210N-7 / Lower side: LU-2220N-7Right side of the material atthe beginning of sewingCFor urethaneUsed for resilientmaterials includingsponge1.6 fold-capacity hook / 2-pitch dial / Shorter thread remaining typeThread nipping work required at the beginning and endof sewing is reduced. This is a high-performance machinewhich contributes to both increased productivity andimproved quality for sewing car seats. Frequency of theuse of scissors by the operator is reduced, therebyhelping prevent the material from being damaged.For material withoverlapped section107-12651For light-weight spongeHigh-speed, 1-needle, Unison-feed, Lockstitch Machinewith Vertical-axis Large Hook and Automatic Thread TrimmerLU-2220N-7For material withoverlapped sectionWrong side of the material atthe end of sewing107-11752CThe needle thread doesnot remain on the right Remaining-thread length: 5mmside of the material.DOperating switchNeedle threadclamping at thebeginning of sewingcan be turnedON/OFF.Wide typeTo be used when asewing product cannot besmoothly fedRight single-sided107-12859Left single-sidedELeft For pipingφ3φ4φ5φ6φFor pipingThe position of theneedle can be adjustedaccording to the pipe tobe sewnD107-11851For pipingUsed for the generalpiping processRight single-sided1mmLeft single-sidedpresserUsed for sewing materialedges107-12750ThickRight single-sidedpresserUsed for sewing materialedgesFor djustable presserfor 6659For 107-47657(special order)(special order)107-12057107-13055107-12354A or K or BWithout grooveThe thread trimming mechanism has been totally redesigned toshorten the length of thread remaining on the material at theend of sewing down to 5 mm.To be used when thethread can not begrasped at the sewingstart
LU-2200N SeriesINTERCHANGEABLE GAUGE PARTSWHEN YOU PLACE ORDERSFeed dog Throat plateFor LU-2220N-7 For LU-2210N-7 / 2212N-7Machine head107-01704107-02009400-58071Wide typeStandardStandard(special order)OptionCodeSNot providedZWithout groove (excluding LU-2220)AA For thin threadBWith bobbin thread remainingamount detecting deviceFor thick thread (LU-2220 only)C AE-16 is applicable to LU-2210 andLU-2212 (only with a 1.6 fold-capacityhook). AE-17 is applicable to LU-2220.Code1-needle101-needle / 2-pitch dial type121-needle / 2-pitch dial /Shorter thread remaining typeCodeWith groove (standard)DL device20 Throat plate (400-58071) for the LU-2220N-7 is also applicable to the LU-2210N-7/LU2212N-7.CodeNot providedZ Provided with DL function / Push-button typeA Provided with DL function / Knee switch typeB Z and A are only applicableto LU-2210. Feed dogFor LU-2210N-7 / ad groove width:107-17304Without groove1.0mm)(To be used if the needlethread and bobbin thread donot intertwine with each otherat the beginning of sewing)BFor thin thread(thread groove width:Hook107-39001Wide type Walking footCode1.0mm)StandardS(thread groove 400-628271.0mmFor thin thread(thread groove width:1.0mm)3.0mmCFor thick thread(thread groove width:1.0mm)2.0mm400-81022NStandardAStandardAWFor urethaneBFor material with overlapped sectionsBRight single-sidedCFor urethaneCLeft single-sidedDRight single-sidedDFor piping (ø3)ELeft single-sidedEFor piping (ø4)FFor piping (ø3)FFor piping (ø5)GFor piping (ø4)GFor piping (ø6)HFor piping (ø5)HAdjustable type for piping (ø3)JFor piping (ø6)JAdjustable type for piping (ø4)KPressing face is reduceK3.0mm1.0mm2.0mm400-83237For needling curvedpreventionFor needling curvedpreventionAdjustable type for piping (ø5)L(Nm130)(Nm140)Adjustable type for piping (ø6)M1.9mm)CodeDouble-capacity hook For the LU-2212 and LU-2220,only 1.6-fold hooks are applicable.(special order)Presser footCode1.6 fold-capacity hookFor e gaugeGauge set de plate Feed 256107-84700107-8020310mm 357107-83850107-85301107-80807Note) Applicable to gauges "4 mm to 36 mm" (LU-2260N-7) and "4 mm to 30 mm" (LU-2260W-7).Any gauges other than the forementioned are available through special order. The right and left slide plates are not included in the parts represented by the gauge set okOptionCodeDL device1.6 fold-capacity hookNNeedle gaugeDouble-capacity hookW6mmBNot providedZ8mmCA10mm (standard)DProvided with DL function/ Push-button type12mmEProvided with DL function/ Knee switch typeB20mmJControl boxCodeSC922BPower supply107-86507107-86101CodeZWith bobbin threadremaining amountdetecting device (AE-16)A Only applicable to the machine witha 1.6 fold-capacity hookOperation panelCodeSingle-phase 100-120VS3-phase 200-240VDSingle-phase 200-240V (for general export)KSingle-phase 200-240V (for ce)NSingle-phase 200-240V (for china)UCodeNot providedCP18CCP180C
LU-2200N SeriesINTERCHANGEABLE GAUGE PARTSWHEN YOU PLACE ORDERSFeed dog Throat plateFor LU-2220N-7 For LU-2210N-7 / 2212N-7Machine head107-01704107-02009400-58071Wide typeStandardStandard(special order)OptionCodeSNot providedZWithout groove (excluding LU-2220)AA For thin threadBWith bobbin thread remainingamount detecting deviceFor thick thread (LU-2220 only)C AE-16 is applicable to LU-2210 andLU-2212 (only with a 1.6 fold-capacityhook). AE-17 is applicable to LU-2220.Code1-needle101-needle / 2-pitch dial type121-needle / 2-pitch dial /Shorter thread remaining typeCodeWith groove (standard)DL device20 Throat plate (400-58071) for the LU-2220N-7 is also applicable to the LU-2210N-7/LU2212N-7.CodeNot providedZ Provided with DL function / Push-button typeA Provided with DL function / Knee switch typeB Z and A are only applicableto LU-2210. Feed dogFor LU-2210N-7 / ad groove width:107-17304Without groove1.0mm)(To be used if the needlethread and bobbin thread donot intertwine with each otherat the beginning of sewing)BFor thin thread(thread groove width:Hook107-39001Wide type Walking footCode1.0mm)StandardS(thread groove 400-628271.0mmFor thin thread(thread groove width:1.0mm)3.0mmCFor thick thread(thread groove width:1.0mm)2.0mm400-81022NStandardAStandardAWFor urethaneBFor material with overlapped sectionsBRight single-sidedCFor urethaneCLeft single-sidedDRight single-sidedDFor piping (ø3)ELeft single-sidedEFor piping (ø4)FFor piping (ø3)FFor piping (ø5)GFor piping (ø4)GFor piping (ø6)HFor piping (ø5)HAdjustable type for piping (ø3)JFor piping (ø6)JAdjustable type for piping (ø4)KPressing face is reduceK3.0mm1.0mm2.0mm400-83237For needling curvedpreventionFor needling curvedpreventionAdjustable type for piping (ø5)L(Nm130)(Nm140)Adjustable type for piping (ø6)M1.9mm)CodeDouble-capacity hook For the LU-2212 and LU-2220,only 1.6-fold hooks are applicable.(special order)Presser footCode1.6 fold-capacity hookFor e gaugeGauge set de plate Feed 256107-84700107-8020310mm 357107-83850107-85301107-80807Note) Applicable to gauges "4 mm to 36 mm" (LU-2260N-7) and "4 mm to 30 mm" (LU-2260W-7).Any gauges other than the forementioned are available through special order. The right and left slide plates are not included in the parts represented by the gauge set okOptionCodeDL device1.6 fold-capacity hookNNeedle gaugeDouble-capacity hookW6mmBNot providedZ8mmCA10mm (standard)DProvided with DL function/ Push-button type12mmEProvided with DL function/ Knee switch typeB20mmJControl boxCodeSC922BPower supply107-86507107-86101CodeZWith bobbin threadremaining amountdetecting device (AE-16)A Only applicable to the machine witha 1.6 fold-capacity hookOperation panelCodeSingle-phase 100-120VS3-phase 200-240VDSingle-phase 200-240V (for general export)KSingle-phase 200-240V (for ce)NSingle-phase 200-240V (for china)UCodeNot providedCP18CCP180C
LU-2200N LU-2220N-7LU-2260N-7LU-2260W-71-needle1-needle / 2-pitch dial type1-needle / 2-pitch dial /Shorter thread remaining type2-needleModel name 3,500sti/min＊Max. sewing speed9mm (forward/backward)Max. stitch length6mm (forward/backward)33.8mmNeedle bar strokehigh speedAuto: 16mm, By hand: 9mmMax. lift of the presser foot1mm〜6.5mm (by dial)Alternating vertical movementLink typeThread take-upN: Vertical-axis 1.6 fold-capacity hookW: Vertical-axis double-capacity hookHookN: Vertical-axis 1.6 fold-capacity hookN: Vertical-axis 1.6 fold-capacity hookW: Vertical-axis double-capacity hook134 35R (Nm140) Nm110〜Nm160Needle#20〜#5, B64〜B138, Nm40/3〜20/3#30〜#4, B46〜B138, Nm60/3〜20/3ThreadDistance from needle tomachine armpowerful263.5mmAutomaticLubricationBuilt on the machine headBobbin thread winderSafety mechanismProvided as standardAutomatic reverse feedfunctionProvided as standardProvided as standard (pneumatic auto-lifter)Auto-lifter0.5MPaCompressed air0.763dK/min (ANR)Air consumption1.078dK/min (ANR)1.337dK/min (ANR)0.736dK/min (ANR)55kgWeight of the machine head58kgPower requirementSingle-phase 100〜120V, 200〜240V3-phase 200〜240VPower consumption425VA “sti/min” stands for “Stiches per Minute”JUKI ECO PRODUCTSThe LU-2200N Series is an eco-friendly product which complies with JUKI ECO PRODUCTS standards for protecting the environmentThe sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use ofhazardous substances, which is stricter than other restrictions, such as those of the RoHS Directive.For details of JUKI ECO PRODUCTS, refer to: http://www.juki.co.jp/eco e/index.htmlThe RoHS Directive is an EU Directive limiting the use of 6 hazardous substances (lead, hexavalent chromium, mercury, cadmium, PBB and PBDE) in electrical and electronic equipment.The Juki Green Procurement Guideline is the voluntarily established criteria to eliminate not only the aforementioned six substances, but also other ones which also adversely affect the environment.high performanceRegistered Organization：Head OfficeThe Scope of the Registration：The activities of research,development, design, sales, distribution, and maintenanceservices of industrial sewing machines, household sewingmachines and industrial robots, etc., including sales andmaintenance services of data entry systems.CM001SEWING MACHINERY BUSINESS UNIT2-11-1, TSURUMAKI, TAMA-SHI,TOKYO 206-8551, JAPANPHONE : (81) 42-357-2254FAX : (81) 42-357-2274http://www.juki.com Specifications and appearance are subject to change without prior notice for improvement. Read the instruction manual before putting the machine into service to ensure safety. This catalogue prints with environment-friendly soy ink on recycle paper.LU-2200NSeriesCapabilities for sewing car seats have beensignificantly improved.JULY, 2015 Printed in Japan(A)
The machine demonstrates outstanding performance when sewing heavy materials, with its "high-quality consistent sewing capabilities", as well as with its remarkably powerful feed. LU-2260N- 7 LU-2260W-7 The machine is the standard type 2-needle machine, which is essential for topstitching pr
juki mbh-180 3 1 gold 1 white juki mh-481 12 gold juki mh-481-5 1 full auto juki mh-484 1 gold juki mo-3916 4 juki mo-3904 1 juki mo-3914 1 juki mo-6704 1 juki mo-6814 new 6 7 are demo juki mo-6816 new 1 juki mo-6900 1 juki mof-3904 1 juki mog-2504 1 juki mog-2505 1 carpet serger
Juki MBH-180 Chainstitch Buttonhole Juki Programable Trackers AMS-220A BY ORDER OF A LEADING CAP AND HEADWEAR MANUFACTURER Live Webcast Made Available Thanks To: Juki DDL-5550-7 Single Needle Lockstitch Juki LK-1900 Electronic Bartacker Consew 223 Single Needle Lockstitch, Cylinder Arm Union Special 56500 Two Needle Chainstitch Brother LZ-B856E
PLN-985U Long Arm Sewing Machine LU-2216N-7, 2266N-7 LG-158-1U, 158U TSC-461U Flat-bed Sewing Machine for . This is a newly designed JUKI's unique lockstitch machine. The machine is able to sew at a pitch as long as 7mm for both normal and reverse feed directions.
For JUKI, the best CS is achieved by listening to customers and developing proposals from new points of . LG-158-1U, 158U TSC-461U. Needle Feed Hook Horizontal-axis hook (large) Horizontal-axis hook (3-fold-capacity) Vertical-axis hook (large) 2-needle Organized split needle bar Bottom-feed
LG-158-1U 28 LG-158U 28 TSC-461U 28 TNU-243U 29 TU-273U 29 TSH-411U 29 TSN-421U 29 TSC-441U 29 TSU-471U 29 BARTACKING / SHAPE-TACKING MACHINES LK-1900B-HS 31 31 31 . Juki Central Europe (JCE), a subsidiary of Juki Corporation, was established in
LG-158-1U (1-needle) 31 LG-158U (2-needle) 31 TSC-461U 31 TNU-243U (unison-feed) 32 TSC-441U (unison-feed) 32 BARTACKING / SHAPE-TACKING MACHINES . Juki Genuine spare parts are made to the highest possible standard and are created with only the best raw materials. The shape,
JUKI # LBH-783U 2,750 Each JUKI # MBH-180 1,650 Each BROTHER # BAS-510 (White) 4,950 Each 510 (Gold) 3,950 Each. www.advancedsewing.com Advanced Sewing Technologies Corp.
Anatomy and Physiology for Sports Massage 11. LEVEL: 3: Term: Definition: Visuals: Cytoplasm Within cells, the cytoplasm is made up of a jelly-like fluid (called the cytosol) and other : structures that surround the nucleus. Cytoskeleton The cytoskeleton is a network of long fibres that make up the cell’s structural framework. The cytoskeleton has several critical functions, including .
