Flat-bed Sewing Machine DDL-8700L DDL-5600N-7 . - Juki

Flat-bed Sewing MachineFlat-bed Sewing Machine1-needle,Unison-feed,Lockstitch Machine with Double-capacity Hook1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large HookDNU-1541-7-0BB/X55270 (for container bag)DNU-1541/X55245 (for thick thread)LU-1510N-7 (standard gauge)LU-1510N (standard gauge)LU-1511N-7 (gauge for europe)DNU-1541/X55245 is able to sew a broad range ofmaterials from genuine leather materials to liningmaterials. Excellent seam tightness on genuine leatherand far less puckering on lining.DNU-1541-7-0BB/X55270 is provided as standard withan external bobbin winder for supplying the large amountof thread required to sew a container bag.Model nameDNU-1541-7-0BB/X55270DNU-1541/X55245Max.sewing speed2,000sti/minMax.stitch length9mm36mm38mmNeedle134 17(Nm200)Nm125 Nm200134 17(Nm160)Nm125 Nm160Thread#30 #5, B46 B138,Nm 60/3 20/3#20 #0, B46 B207,Nm 40/3 15/3Needle bar strokeThis one-needle machine with a thread trimmer utilizes a basicperformance which matches best to the sewing of medium toheavy materials. The machine's rectangular feeding motionpromises the consistent feeding of materials of all thicknessesModel nameMax. sewing speedMax. stitch length1-needle,Needle-feed,Lockstitch Machine with Double-capacity HookDNU-1541/X55247 (for thick thread)2.5 6.5mmNeedle135 17 (Nm160) Nm125 Nm180Thread#30 #5, B46 B138, Nm 60/3 20/3LU-1510NA-7Model nameDNU-1541/X552472,500sti/minMax. sewing speedMax.stitch length7mmMax. stitch lengthNeedle bar stroke36mmPresser foot134 17 (Nm160) Nm125 Nm180Alternating vertical movementDNU-1541/X55247LU-1508N (standard gauge)LU-1509N (gauge for europe)Model nameMax. sewing speedMax. stitch lengthPresser footAlternating verticalmovementNeedleThreadLU-1510N-7(for sewing car seats)LU-1510NA-72,000sti/min7mmAuto: 16mm1 6.5mmNeedle135 17 (Nm120) Nm100 Nm160ThreadTEX 50 1355-way switch is an option.LU-1510NA-71-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large HookLU-1510NA-7/X55500 (for sewing car seats)Best-suited for plants manufacturing car seats. Beautifullyfinished seams are produced by increasing the feed efficiency.The maximum stitch length is 10mm. The completerectangular feed locus enables accurate feed of extraheavy materials while preventing stitch gathering. With itssufficient needlebar stroke of 38mm and long 190Rneedle, the machine supports the sewing of extra heavymaterials. The machine comes with an extra large steelhandwheel with a diameter as large as φ175.Application5-way switch is an option.The machine demonstrates sewing capabilities best suited forsewing car seats of light- to heavy-weight materials withoutusing any additional devices.The machine prevents fabric yarn breakage when using a thinneedle. The machine is able to perform low-tension sewingwhere lesson a load is applied to the material.1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook03By knee: 16mm1 6.5mmModel name#30 #1, B46 B207, Nm 60/3 15/39mmAlternating vertical movementMax.sewing speedThread2,500sti/min1-needle, Unison-feed, Lockstitch, Machine with Vertical-axis Large HookThe machine is created by converting the standardmachine into a needle-feed mechanism, and with newrectangular feed which helps reduce gathered stitches, itoffers excellent responsiveness to the sewing of thickthread (Needle thread #1/Bobbin thread #1). Themachine is best-suited for sewing such as thick threaddecrative stitches on jeans.NeedleLU-1510N3,000sti/minAuto: 16mmPresser footDNU-1541/X55245LU-1510N-7, 1511N-7LU-1508NS, 1509NS LU-1508NH, 1509NHHeavy-weightExtra heavy-weight2,500sti/min2,000sti/min9mm10mmModel nameBy knee: 16mmMax. sewing speedMax. stitch length2.5 6.5mmPresser footLU-1510NA-7/X555002,000sti/min7mmBy hand: 9mm, By knee: 16mm1 6.5mm190(R) or 135 17 (Nm160) Nm125 Nm180Alternating vertical movement#30 #5, B46 B138,Nm 60/3 20/3Needle135 17 (Nm120) Nm100 Nm160Thread#30 #5, B46 B138, Nm 60/3 20/3#20 #1, B69 B207,Nm 40/3 8/3LU-1508NLU-1510NA-7/X5550004

Flat-bed Sewing MachineFlat-bed Sewing Machine1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large HookSemi-dry Direct-drive, 1-needle, Unison-feed,Lockstitch Machine with Vertical-axis Large HookLU-1520NCS-7 ( with a shorter-thread remaining type thread trimmer)LU-2810-7 (2.0 fold-capacity hook, 2-pitch dial)LU-2810 (2.0 fold-capacity hook)This model of sewing machine is a straight knife with a shorter-threadremaining type thread trimmer. It is based on the tried-and-trustedLU-1510NA-7 Series and achieves the best-suited seam quality forsewing car seats. In addition, thread nipping process which has beenconventionally required at the end of sewing is no longer required,thereby eliminating concern about damages on sewn products byscissors.High and long arm has been adopted. The machine is suited to thesewing of car seats, sofas and bags. It is a sewing machine providedwith dramatically improved workability and functions which are requiredfor sewing large products and extra heavy-weight materials.LU-1520NCS-7Model nameMax. sewing speed2,000sti/minMax. stitch length7 mm (nomal/reverse feed)Presser footBy hand: 9mm, Auto: 16mm1 6.5mmAlternating vertical movementNeedle135 17(Nm120) Nm100 Nm160Thread#30 #5Model nameLU-1520NCS-7Presser footLU-1560N-7LU-1560NLU-1561N-7 (gauge for europe)LU-1561N (gauge for europe)LU-1565N (with organized split needle bar)(standard gauge)Alternating vertical 1N2,500sti/min9mmMax. sewing speedMax. stitch lengthAuto: 16mmPresser footAlternating vertical movementNeedleThreadBy knee: 16mm1 6.5mmLU-1565NBy knee: 13mm2.5 6.5mm5-way switch is an option.DIGITALSEWINGSYSTEMModel nameMax. sewing speedGaugeMax. stitch lengthPresser foot(2-needle,Vertical axis 2.0 fold-capacity hook)LU-2860V-7LU-2828V-7A：Gauge for europe9mm135 17 (Nm160) Nm125 Nm180#30 #5, B46 B138, Nm 60/3 20/3LU-2810-720mmAlternating verticalmovement(DL)9mm134 35 (Nm140) Nm125〜NM180 134 35 (Nm160) Nm125〜Nm200#30〜#5#30〜#0The sewing machine can be paired with equipment which supports NFC(Near Field Communication) only by holding the equipment over the sewing machine.Alternating vertical movementNeedleThreadLU-2860-72,700sti/minLU-2860S: Standard gauge, A: Gauge for europe9mmBy hand: 10mm, Auto: 20mmBy knee: 20mm1 9mm135 17 (Nm160) Nm125 Nm180#30 #5, B46 B138, Nm 60/3 le)12mmPresser footManagement, browsing and editing of data can be carried out onthe application softwareData on sewing machine adjustments made according to the product to be sewncan be transferred to a commercially-available Android tablet in contactless mode.This enables quick check for uniform settings as well as confirmation of conditionsof sewing machines in a sewing line, thereby facilitating setup changes. Theoperation panel is also provided as standard with a USB port. Data managementand software update can be carried out with ease using a USB thumb drive.05By knee: 20mm1 9mmSemi-dry Direct-drive, Unison-feed,Lockstitch Machine with Vertical-axis Large Hook(2.7 fold-capacity hook, 2-pitch dial, long-pitch type)3,500sti/minGaugeThread9mmBy hand: 10mm, Auto: 20mmLU-1560N-7(1-needle,Vertical axis 2.7 fold-capacity hook /Shorter - thread remaining type)Max. sewing speedNeedleS: Standard gauge, A: Gauge for europe135 17 (Nm160) Nm125 Nm180This model digitalizes adjustment values required for sewing and easily transfers them to the main body of sewing machine by means of theICT.This sewing system is the flag ship model of sewing machines that are specifically developed for sewing heavy-weight materials for car seatsand sofas such as leather, artificial leather and heavy-weight fabric. Five adjustment values (stitch length, presser foot height, pressure footpressure, alternate vertical movement amount of the walking foot and needle thread tension) required for sewing are digitalized.Max. stitch lengthLU-2810High and long arm has been adopted. The machine is suited to thesewing of car seats, sofas and bags. It is a sewing machine providedwith dramatically improved workability and functions which are requiredfor sewing large products and extra heavy-weight materials.Semi-dry Direct-drive, Unison-feed, Lockstitch Sewing Systemwith automatic thread trimmerModel name3,000sti/minLU-2860-7 (2.7 fold-capacity hook, 2-pitch dial, long-pitch type)LU-2860 (2.7 fold-capacity hook, 2-pitch dial, needle thread roll-in and shorter-thread remaining type)2,000sti/min#30 #5, B46 B138, Nm 60/3 20/3LU-2828V-7LU-2860V-7LU-2810-7Semi-dry Direct-drive 2-needle,Unison-feed, Lockstitch Machine with Vertical-axis Large HooksThe two-needle machine with a thread trimmer offers basic performancethat is ideally suited to sewing heavy materials. The machine utilizes anew mechanism that does not change the ratio of the alternate verticalmovement of the walking foot and presser foot, even when the materialthickness changes. The mechanism helps prevent slippage betweenthe upper and lower materials even when a heavy material is used.Model nameGaugeMax. stitch length2-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hooks(standard gauge)Max. sewing speedLU-2828V-7This model is the most-desired sewing machine for sewing furniture suchas sofas. It is best-suited to topstitching with a long stitch pitch. During thetopstitching process, the longer distance from the machine arm to the bed,in particular, effectively demonstrates the machine's improved workability.Model nameMax. sewing speedGaugeMax. stitch lengthPresser footAlternating vertical /min2,700sti/minA: Gauge for europe12mmBy hand: 10mm, Auto: 20mm1 9mm135 17 (Nm160)Nm125 Nm180#30 #5, B46 B138, Nm 60/3 20/3LU-2868AL-706

Flat-bed Sewing MachineFlat-bed Sewing MachineSemi-dry Direct-drive, 1-needle, Unison-feed,Lockstitch Machine with Vertical-axis Large HookSemi-dry, Unison-feed, Lockstitch Machinewith Automatic Thread Trimmer of V-Belt TypeLU-2810-6 (1-needle, vertical-axis large hook)LU-2860-6 (2-needle, vertical-axis large hooks)LU-2828A-6 (vertical-axis 2.7 fold-capacity hook, needle thread roll-in and shorter-thread remaining type)LU-2828A-7 (2.7 fold-capacity hook, 2-pitch dial, needle thread roll-in and shorter-thread remaining type)The shorter-thread remaining type LU-2828A-7 is a high-performancesewing machine. It leaves a shorter thread on the material at thebeginning of sewing by means of the needle thread clamp device, aswell as at the end of sewing by means of the thread trimmer which isprovided with a shorter-thread remaining function. This means thatmanual thread nipping both at the beginning and at the end of sewing isno longer required, thereby helping reduce operator fatigue. Thanks tothe adoption of a 2.7 fold-capacity hook, the frequency of bobbin threadchanging is reduced and workability is improved.3,000sti/minA: Gauge for europeGaugePresser footAlternating vertical movementNeedleThread(LU-2828A-6)The shorter-thread remaining type LU-2828A-6 is a high-performancesewing machine. It leaves a shorter thread on the material at thebeginning of sewing by means of the needle thread clamp device, aswell as at the end of sewing by means of the thread trimmer which isprovided with a shorter-thread remaining function. This means thatmanual thread nipping both at the beginning and at the end of sewing isno longer required, thereby helping reduce operator fatigue. Thanks tothe adoption of a 2.7 fold-capacity hook, the frequency of bobbin threadchanging is reduced and workability is improved.LU-2828A-7Model nameMax. sewing speedMax. stitch lengthHigh and long arm has been adopted. The V-belt type machine head isadded to the machine lineup following the Direct-Drive type. The machineis suited to the sewing of car seats, sofas and bags. It is a sewing machineprovided with dramatically improved workability and functions which arerequired for sewing large products and extra heavy-weight materials.9mmModel nameBy hand: 10mm, Auto: 20mmMax. sewing speed1 9mm134 35 (Nm140)Nm125 Nm180#30 #5, B46 B138, Nm 60/3 20/3Max. stitch lengthPresser footLU-2818ESAL-712mmModel name6mmAuto: 16mmPresser foot1 6.5mmAlternating vertical movementLU-2810ESAL-7Semi-dry Direct-drive, 1-needle, Unison-feed,Lockstitch Machine with Vertical-axis 2.7 fold-capacity HookNeedle134 35R (Nm140) Nm110 Nm160Thread#20 #5, B69 B138, Nm 40/3 20/3LU-2260N-71-needle, Lockstitch, Zigzag Stitching Machine with Large HookLU-2810A-7/X73178LZH-1290-7LZH-1290The machine tenses thread uniformly over the zigzag stroke toproduce beautifully finished stitches at a high speed. With itsextended zigzag with, higher presser foot lift, and newlyintroduced horizontal-axis double-capacity hook, the machineupgrades the functions required for the sewing of heavymaterials.The machine is suited to sew car seats, sofas and bags, provided withdramatically improved workability and functions required for sewinglarge products and extra heavy-weight materials.073,500sti/minMax. stitch length1 9mm#30 #0, Nm 60/3 9/3LU-2260N-7, 2260W-7Max. sewing speedAuto: 20mm, By hand: 10mm135 17 (Nm160) Nm125 Nm200LU-2810A-7/X73178Max. sewing speed3,000sti/minMax. stitch length9mmMax. sewing speedBy hand: 10mm, Auto: 20mmMax. stitch lengthModel nameLZH-1290-7LZH-12902,000sti/min6mmBy knee: 11mmBy knee: 14mm1 9mmPresser footNeedle135 17 (Nm160) Nm125 Nm180Zigzag widthMax. 8mm (adjustable to 10mm)Thread#30 #5, B46 B138, Nm 60/3 20/3NeedleSY1906 (Nm100) Nm90 Nm110Alternating vertical movement134 35 (Nm140) Nm125 Nm180#30 #5, B46 B138, Nm 60/3 20/3The vertical strokes of the presser foot and walking foot (their alternatingvertical movement) can be easily changed using a large dial mountedon the top surface of the machine head. In addition, the sewing speedis automatically adjusted with the set value. With this feature, idealsewing conditions are maintained at all times.9mmThreadPresser foot1 9mm135 17 (Nm160) Nm125 Nm180LU-2828ESA-7NeedleModel nameBy hand: 10mm, Auto: 20mmPresser footLU-2260N-7 (1.6 fold-capacity hook)LU-2260W-7 (double-capacity hook)3,500sti/minAlternating vertical movement3,000sti/minGauge for europeHigh-speed, 2-needle, Unison-feed,Lockstitch Machine with Vertical-axis Large Hooks＊ The maximum sewing speed varies depending on sewing conditions.3,800sti/minLU-2828A-69mmMax. stitch lengthThreadIncreased maximum sewing speed of 3,800 sti/min* (LU-2810ESAL-7,2.0 fold-capacity hook) and 3,500 sti/min* (LU-2818ESAL-7 andLU-2828ESA-7, 2.7-fold-capacity hook) is achieved.These models of sewing machines demonstrate increased productivityparticularly when sewing long materials.LU-2810ESAL-72,700sti/minS: Standard gauge, A: Gauge for europeNeedleLU-2810ESAL-7 (Long-pitch type〈2.0 fold-capacity hook〉)LU-2818ESAL-7 (Long-pitch type〈2.7 fold-capacity hook〉)LU-2828ESA-7 (2.7 fold-capacity hook, shorter-thread remaining type)Model name3,000sti/minAlternating vertical movementSemi-dry Direct-drive, High-speed, 1-needle, Unison-feed,Lockstitch Machine with Vertical-axis Large Hook withautomatic thread trimmer (long-pitch type)Max. sewing -2810A-7/X73178LZH-1290-708

Cylinder-bed Sewing MachineCylinder-bed Sewing MachineCylinder-bed, 1-needle, Top and Bottom-feed, Lockstitch MachineSemi-long arm, cylinder-bed, 1-needle, unison-feed,lockstitch machine with a vertical-axis large hookDSU-145-7 (automatically lubricated for hook)DSU-145U (automatically lubricated for hook)LS-2342-7LS-2342JUKI's DSU series sewing machines smoothly sew tubular materials such asbags and shoes, demonstrating outstanding capabilities when sewing smalldiameter sections.Model nameDSU-145-7By knee: 13mmAlternating verticalmovementThreadMax. sewing speedAlternating verticalmovementDP 17 (#21) #14 #22DSU-145-7DSC-244UDSC-245U (automatically lubricated for hook) DSC-245-7 (automatically lubricated for hook)DSC-246U (double-capacity hook)DSC-246-7 (double-capacity hook)The unison-feed provides the optimal feed efficiency by feeding heavymaterials smoothly and firmly.The diameter of the cylinder is as small as φ46mm for a standard hook orφ50mm for a double-capacity hook. The small-diameter cylinder is quitehelpful for handling bags, shoes, and other small articles smoothly and easily.Model nameDSC-244U(V)DSC-245U(V), 245(V)-72,200sti/minMax. stitch length6mmPresser footDP 17(#18) #14 #21Thread#50 #20, B33 B69,Nm 120/3 40/3By knee: 14mmBy knee: 15mm(without trimmer)DP 17(#21) #14 #2309DSC-245/X55200Max. sewing speed2,200sti/minMax. stitch length6mm (nomal/reverse feed)Alternating verticalmovement#30 #5134 35 (Nm180) Nm100 180#40 #5#20 #0LS-2342LS-1341LS-1340The slimmed-down throat plate easily adjusts to the sewing of small tubulararticles with diameters as small as φ40mm. This enhances the machine'sability to smoothly sew not only bags and shoes, but also small article such aswallets. The newly developed mode of highly rigid rectangular feedguarantees outstanding feed performance.Alternating verticalmovement#50 #8, B33 B92,Nm 120/3 30/3DSC-245-7LS-1342-7, 1342LS-1341, 13402,500sti/min2,000sti/min6mmBy knee: 16mm1 6.5mm2.5 6.5mmNeedle135 17 (Nm160) Nm100 Nm180 (1342-7, 1342, 1341)135 17 (Nm140) Nm100 Nm180 (1340)Thread#30 #5, B46 B138, Nm 60/3 20/3 (1342-7)#40 #5, B33 B138, Nm 90/3 20/3 (1342, 1341)#50 #8, B33 B92, Nm 120/3 30/3 (1340)LS-1342-7Cylinder-bed, 1-needle, Unison-feed,Lockstitch Machine with Vertical-axis HookLS-1341/X55287(with dial for adjustment of alternating vertical movement)The vertical stroke of the presser foot and walking foot (amount of alternatingvertical movement) can be easily changed with the large dial mounted on thetop of the machine head. This ensures ideal sewing conditions at all times.The machine provides good tightness of seams even with lower threadtension, and reduces the variances of stitch length at high and low speed.Thanks to a slide take-up lever, the responsiveness to thick threads has beenfurther improved, and the ratio of alternating vertical movement remainsunchaged even with the changes of material thickness.Lift of the presser foot134 35 (Nm140) Nm100 180Presser footDSC-245-7-0B/X55167 (standard hook)DSC-245U/X55200 (standard hook)DSC-245U/X55278 (standard hook and binder)DSC-245-7-0B/X551671 9mmMax. stitch lengthCylinder-bed, 1-needle, Unison-feed, Lockstitch MachineModel nameBy hand: 10mm, Auto: 20mmLS-1342-7 (gauge for small articles)LS-1342 (gauge for small articles)Model name3.0 4.8mmNeedle2,000sti/min9mm (nomal/reverse feed)Cylinder-bed, 1-needle, Unison-feed, Lockstitch Machine with Vertical-axis HookMax. sewing speedBy knee: 13mm,15mm (without trimmer)Alternating verticalmovementThreadLS-2342HThick-thread typeDSC-246U(V), 246(V)-7V type: attaching of piping tapeMax. sewing speedNeedleLS-2342H-72,500sti/minPresser foot2 5mmCylinder-bed, 1-needle, Unison-feed, Lockstitch MachineApplicationLS-2342SStandardMax. stitch lengthBy knee: 15mm#50 #8, B33 B92, Nm 120/3 30/3LS-2342S-7Application6mmMax. stitch lengthNeedleModel nameDSU-145U2,000sti/minMax. sewing speedPresser footFor this sewing machine, the distance from machine arm to needle has beenincreased to respond to the sewing of bags and furniture.The machine inherits excellent operability of the predecessor model, and isprovided with substantially improved workability and capabilities that arerequired for sewing large materials and extra heavy-weight materials.DSC-245/X55278Model nameApplicationBy hand: 9mm, By knee: 16mm (max.)Max.sewing speed2.5 6.5mmNeedle135 17 (Nm130) Nm100 Nm180Thread#50 #8, B33 B92, Nm 120/3 ti/minMax.stitch length6mmNeedle bar stroke36mmNeedle135 17 (Nm160) Nm125 Nm180Thread#30 #5, B46 B138, Nm 60/3 20/3LS-1341/X5528710

Cylinder-bed Sewing MachinePost-bed Sewing MachinePost-bed, 1-needle, Unison-feed, Lockstitch MachineCylinder-bed, 1-needle, Unison-feed,Lockstitch Machine with Vertical-axis HookPLC-2710-7PLC-2710LS-1342-7-0BB/X55275 (thick-thread type)LS-1342/X55274 (thick-thread type)LS-1342/X55280 (small-c

PLN-985U Long Arm Sewing Machine LU-2216N-7, 2266N-7 LG-158-1U, 158U TSC-461U Flat-bed Sewing Machine for . This is a newly designed JUKI's unique lockstitch machine. The machine is able to sew at a pitch as long as 7mm for both normal and reverse feed directions.