ISO 3601 Metric Size O-Rings - Apple Rubber
ISO 3601 MetricSize O-RingsQuick Reference Chartapplerubber.com
General ApplicationsApple o-rings are available in a choice of six basic materials, each in a range of optional durometer (Shore A)hardnesses. Other materials available upon request.Buna-N/Nitrile: Buna N/Nitrilerubber is a copolymer ofbutadiene and acrylonitrile.You will find compounds thatare ideally suited for oil andfuel-resistant applications ofall types.Ethylene-Propylene: In theEthylene-Propylene family, youwill find compounds that areused extensively for outdoor,weather-resistant uses andwater applications. The firstchoice for low torque drivebelts.Silicone: In the Silicone family,you will find compounds thatare excellent as static sealsin extreme temperatureconditions.Neoprene : In the Neoprenefamily, you will find compoundswhich are the superior sealingmaterials for the refrigerationindustry featuring resistance toammonia and Freon .Fluorocarbon: In theFluorocarbon family, you willfind compounds that make upthe preferred seals for aircraftengines, automotive fuelhandling systems and hardvacuum service.Fluorosilicone: In theFluorosilicone family, you willfind compounds that makeup seals that are unparalleledfor aerospace fuel systemsand auto fuel emission controlsystems.All materials are compoundedunder stringent quality controlfor uniformity of physicalproperty, and to meetor exceed government,military, space program,automotive, F.D.A., industrialand commercial specifications.To Determine Material:1. Determine end use: static(stationary) or dynamic(moving).2. List the substance thatthe seal will be exposed toand check o-ring materialresistances in ChemicalCompatibility Table(s) listedin the Apple Seal DesignGuide.3. List ALL factors of sealapplication and checkmaterial performance.A. Pressure: determinesmaterial hardness andselection.B. Heat/Cold: check materialtemperature range(s).C. Friction: determinesmaterial hardness andselection.D. Permeability: importantfor pneumatic andvacuum applications.4. Medical applications: makesure an Apple representativeis aware if medical gradematerials are required.The most commonly used durometer is 70. Although other durometers are offered, availability may be limited due to processing or shrinkage s(Shore A)TemperatureRange**(Dry Heat Only)Description-40 to 257 F-40 to 125 CPresently the seal industry’s most widely used elastometer. Nitrilecombines excellent resistance to petroleum-based oils and fuels,silicone greases, hydraulic fluids, water and alcohols. It has a goodbalance of such desirable working properties as low compressionset, high tensile strength and high abrasion resistance.Ethylene-Propylene (EPM/EPDM)EP40 thru 90-40 to 275 F-40 to 135 CFeatures good resistance to such polar solvents as ketones (MEKand Acetone). EPM/EPDM is also highly recommended foreffective resistance to steam (to 400 F), hot water, silicone oilsand greases, dilute acids and alkalies, alcohols and automotivebrake fluids. Properly compounded, Ethylene Propylene canprovide extended temperature range of -76 F to 350 F.Silicone (Mq; Pmq; Vmq; Pvmq)SL25 thru 80-85 to 400 F-65 to 230 CEspecially resistant to high, dry heat in primarily staticapplications. Silicones are fungus resistant, odorless, tasteless,non-toxic elastomers and possess high-resistance to the agingeffects of both sunlight and ozone attack.Neoprene (Chloroprene) (CR)CR40 thru 90-40 to 250 F-40 to 121 CAn early developed, oil-resistant substitute for natural rubber,Neoprene features moderate resistance to petroleum oils,good resistance to ozone, sunlight and oxygen aging, relativelylow compression set, good resilience, reasonable cost and highresistance to attack by Freon and Ammonia.Fluorocarbon (Viton ) (Fluorel ) (FKM)VT55 thru 95-13 to 446 F-25 to 230 C una-N/Nitrile (NBR)BBN40 thru 90Fluorosilicone (Fvmq)FS40 thru 80-75 to 400 F-60 to 200 CCombines high-temperature toughness with wide chemicalagent compatibility, Fluorocarbon compounds feature excellentresistance to petroleum products and solvents and goodhigh-temperature compression set characteristics.Combines the good high and low temperature stability ofSilicones with the fuel, oil and solvent resistance of fluorocarbons.FS compounds feature good compression set and resilienceproperties. FS compounds are suitable for exposure to air,sunlight, ozone, chlorinated and aromatic hydrocarbons.*Please check the latest standard for current version. **The temperatures listed are general operating range.800.828.7745 (U.S. and Canada only) 716.684.6560 or visit applerubber.com
How to Determine O-Ring Size*Standard O-RingsEvery Metric ISO 3601 Size in Stock:Listed in millimeters. Includes allstandard Inside Diameters from0.74mm to 658.88mm, OuterDiameters from 2.78mm to672.86mm and cross sections (widths)from 1.02 to 6.99mm. Constantlyrestocked to assure immediatedelivery of any size in small and largequantities.For Sequence in Ordering:Fastest Delivery on O-Rings:Most likely the size and compoundyou require is in our stock of over300,000,000 o-rings. Immediateshipments with no intermediatedelays. (Remember – with Appleyou can buy direct.)1 Size (catalog number)2 Durometer and material3 QuantityExample:110 – 70SLR – 10,000(size – durometer, material and color – quantity)How to Order: The temperatureslisted are general operating ranges forthe entire family of each compound.Simplified Reference Easy to Order:All the information you need at aglance. All sizes listed by ascendinginside diameter (I.D.) in decimalsizes. Standard ISO 3601 UniformNumbering System (order bya single number).These will vary with specificcompounds and/or length ofexposure to temperature extremes.For example, silicone may still beserviceable with limited exposureto 300 C.We highly recommend that in allcases, samples of a specific size andcompound should be tested in theapplication before use in production.Choice of Six Materials as Standard:Rubber compounds and optionsof Durometer hardness to satisfypractically any service condition.Check with our sales staff for othermaterial needs.Outside diameter(O.D.) is forreference only.O-Rings arespecified by I.D.and cross section.Inside DiamterWidth (Cross Section)Apple Catalog Numbers are identicalto the ISO 3601 Numbering System,indicating precise I.D. and Widthdimensions of o-rings in oneordering number.* Shrinkage Size Adjustment: Various o-ringcompounds exhibit different shrinkage ratesduring molding. The normal o-ring sizes hereinshown are based upon a 70 Durometer Nitrilestandard. For other o-ring materials, be sure toconsult your Apple representative.Seal Types and Gland DesignO-Ring Gland Design for Dynamic /1.452.21/2.293.02/3.124.65/4.785.94/6.10Groove Width. 20.050.050.050.050.080.100.150.20O-Ring Gland Design for Static .150.18Groove Width. 11.05–––5.286.207.5210.7414.58800.828.7745 (U.S. and Canada only) 716.684.6560 or visit 3-1.270.13-1.520.050.050.050.050.080.100.150.20
ISO No.I.D.WidthI.D. Tol.W. Tol.ISO No.I.D.WidthI.D. Tol.W. 622.622.622.622.622.622.622.622.622.622.622.62 0.100 0.100 0.100 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.180 0.230 0.230 0.230 0.230 0.230 0.230 0.250 0.250 0.250 0.280 0.280 0.280 0.330 0.330 0.330 0.380 0.380 0.460 0.460 0.460 0.460 0.460 0.510 0.510 0.510 0.610 0.610 0.610 0.690 0.690 0.760 0.760 0.760 0.940 0.940 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.180 0.230 0.230 0.230 0.250 0.250 0.250 0.250 0.250 0.250 0.300 0.300 0.300 0.300 0.300 0.300 0.380 0.380 0.380 0.380 0.380 0.380 0.430 0.430 0.430 0.430 0.430 0.430 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 533.533.533.533.533.533.533.533.533.533.53 0.510 0.510 0.510 0.510 0.510 0.510 0.560 0.560 0.560 0.560 0.610 0.610 0.610 0.710 0.710 0.760 0.760 0.760 0.890 0.890 0.890 0.890 0.890 1.020 1.020 1.020 1.020 1.140 1.140 1.140 1.140 1.270 1.270 1.270 1.270 1.400 1.400 1.400 0.130 0.130 0.130 0.130 0.130 0.130 0.180 0.230 0.230 0.250 0.250 0.250 0.250 0.250 0.250 0.300 0.300 0.300 0.300 0.300 0.300 0.380 0.380 0.380 0.460 0.460 0.460 0.510 0.510 0.510 0.510 0.610 0.610 0.610 0.610 0.610 0.610 0.610 0.710 0.710 0.710 0.710 0.710 0.760 0.760 0.760 0.760 0.760 0.890 0.890 0.890 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100800.828.7745 (U.S. and Canada only) 716.684.6560 or visit applerubber.com
ISO No.I.D.WidthI.D. Tol.W. Tol.ISO No.I.D.WidthI.D. Tol.W. 335.335.335.33 0.890 0.890 0.890 0.890 0.890 0.890 0.890 1.020 1.020 1.020 1.020 1.140 1.140 1.140 1.140 1.270 1.270 1.270 1.270 1.400 1.400 1.400 1.400 1.400 1.650 1.650 1.650 1.650 1.650 1.650 1.910 2.030 2.160 0.130 0.130 0.180 0.230 0.230 0.250 0.250 0.250 0.250 0.250 0.250 0.300 0.300 0.300 0.300 0.300 0.380 0.380 0.380 0.380 0.460 0.460 0.460 0.460 0.510 0.510 0.510 0.510 0.610 0.610 0.610 0.610 0.610 0.710 0.710 0.710 0.710 0.710 0.760 0.760 0.760 0.760 0.760 0.760 0.940 0.940 0.940 0.940 0.940 0.940 0.940 0.940 0.940 1.020 1.020 1.020 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 .99 1.020 1.140 1.140 1.140 1.140 1.270 1.270 1.270 1.270 1.400 1.400 1.400 1.400 1.520 1.520 1.650 1.650 1.650 1.780 1.780 1.910 2.030 2.160 2.290 2.410 2.410 2.540 2.670 2.790 2.920 3.050 0.840 0.840 0.840 0.840 0.940 0.940 0.940 0.940 0.940 0.940 0.940 0.940 0.940 1.020 1.020 1.020 1.020 1.140 1.140 1.140 1.140 1.400 1.400 1.400 1.400 1.520 1.520 1.520 1.520 1.520 1.520 1.780 1.780 1.780 1.780 1.780 1.910 1.910 2.030 2.160 2.160 2.160 2.290 2.290 2.410 2.410 2.540 2.670 2.790 2.920 3.050 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150 0.150800.828.7745 (U.S. and Canada only) 716.684.6560 or visit applerubber.com
One Source for All Your Sealing NeedsApple Rubber Products stocks every AS-568* and most commonmetric sizes, plus a wide variety of non-standard, mil spec andgovernment-standard o-rings. Standard actual sizes include I.D.’sfrom .029” to 26” and cross sections from .040” to .275”.Apple offers the widest range of sizes in the industry, startingwith our exclusive MicrOrings, available as small as .008” I.D.We also have a large tooling inventory to eliminate productiondelays and save you tooling costs. In addition, Apple cancustom engineer o-rings and seals for prototypes or fullproduction runs.To top it off, 93 percent of our orders are shipped within24 hours. When you call Apple, you deal direct with themanufacturer. Our experienced staff provides complete andcomprehensive service to help you get the correct o-ringfor your application.Full Line of QualityApple Rubber ProductsProducts:O-Rings — standards, metrics,MicrOrings, MacrOrings LSR (Liquid Silicone Rubber) omposite sealsC(rubber bonded to plastic or metal)Custom-molded sealsCustom-molded shapesMedical sealsThermobonded sealsFilterSeal Military specsStandard and exotic materialsServices:Design capabilitiesPrototyping and production runsFull quality-control laboratoryClass 10,000 (7) Clean RoomISO 9001-AS9100 B certifications*Please check the latest standard for current version.310 Erie StreetLancaster, New York 14086P (716) 684-6560F (716) 684-8302info@applerubber.comFor more information orto order call 1-800-828-7745or visit applerubber.com. 2018 Apple Rubber Products, Inc.
ISO No. I.D. Width I.D. Tol. W. Tol.-001 0.74 1.02 0.100 0.080-002 1.07 1.27 0.100 0.080-003 1.42 1.52 0.100 0.080-004 1.78 1.78 0.130 0.080
ISO 10381-1:2002 da ISO 10381-2:2002 da ISO 10381-3:2001 da ISO 10381-4:2003 da ISO 10381-5:2001 da ISO 10381-6:1993 da ISO 10381-7:2005 ne ISO 10381-8:2006 ne ISO/DIS 18512:2006 ne ISO 5667-13 da ISO 5667-15 da Priprema uzoraka za laboratorijske analize u skladu s normama: HRN ISO 11464:2004 ne ISO 14507:2003 ne ISO/DIS 16720:2005 ne
ISO 10771-1 ISO 16860 ISO 16889 ISO 18413 ISO 23181 ISO 2941 ISO 2942 ISO 2943 ISO 3724 ISO 3968 ISO 4405 ISO 4406 ISO 4407 ISO 16232-7 DIN 51777 PASSION TO PERFORM PASSION TO PERFORM www.mp ltri.com HEADQUARTERS MP Filtri S.p.A. Via 1 Maggio, 3 20060 Pessano con Bornago (MI) Italy 39 02 957
ISO 18400-107, ISO 18400-202, ISO 18400-203 and ISO 18400-206, cancels and replaces the first editions of ISO 10381-1:2002, ISO 10381-4:2003, ISO 10381-5:2005, ISO 10381-6:2009 and ISO 10381-8:2006, which have been structurally and technically revised. The new ISO 18400 series is based on a modular structure and cannot be compared to the ISO 10381
The DIN Standards corresponding to the International Standards referred to in clause 2 and in the bibliog-raphy of the EN are as follows: ISO Standard DIN Standard ISO 225 DIN EN 20225 ISO 724 DIN ISO 724 ISO 898-1 DIN EN ISO 898-1 ISO 3269 DIN EN ISO 3269 ISO 3506-1 DIN EN ISO 3506-1 ISO 4042 DIN
Rosca Métrica ISO para insertos o re-ductores de roscas Metric ISO thread for helical coil wire screw thread inserts MF 60º DIN 13 Rosca Métrica Fina ISO Metric fine ISO thread MJ 60º DIN ISO 5855 Rosca Métrica ISO para aeronáutica Metric ISO thread for aeronautics G 55º DIN ISO 228 Rosca
D. Metric Jogging Meet 4 E. Your Metric Pace 5 F. Metric Estimation Olympics. 6 G: Metric Frisbee Olympics 7 H. Metric Spin Casting ,8 CHAPTER III. INDOOR ACTIVITIES 10 A. Meteic Confidence Course 10 B. Measuring Metric Me 11 C. Metric Bombardment 11 D. Metric
Button Socket Head Cap Screws- Metric 43 Flat Washers- Metric 18-8 44 Hex Head Cap Screws- Metric 18-8 43 Hex Nuts- Metric 18-8 44 Nylon Insert Lock Nuts- Metric 18-8 44 Socket Head Cap Screws- Metric 18-8 43 Split Lock Washers- Metric 18-8 44 Wing Nuts- Metric 18-8 44 THREADED ROD/D
ISO 14644‐1 FEDERAL STANDARD 209E ISO Class English Metric ISO 1 ISO 2 ISO 31 M1.5 ISO 410 M2.5 ISO 5 100 M3.5 ISO 6 1,000 M4.5 ISO 7 10,000 M5.5 ISO 8 100,000 M6.5 ISO 9N/A N/A Standard 209E classifications are out‐of‐date. This standard was officially retired in 2001. Increasing Cleanliness
