MyUTN User Manual Windows
USB Deviceservers & USB DongleserversmyUTN User ManualWindowsUSB DeviceserversmyUTN-50a, myUTN-55, myUTN-2500USB DongleserversmyUTN-80, myUTN-800
Manufacturer & ContactSEH Computertechnik GmbHSuedring 1133647 BielefeldGermanyPhone: 49 (0)521 94226-29Fax: 49 (0)521 94226-99Support: 49 (0)521 94226-44Email: info@seh.deWeb: http://www.seh-technology.comDocumentType: User ManualTitle: myUTN User Manual WindowsVersion: 4.0 2018-06Legal InformationSEH Computertechnik GmbH has endeavored to ensure that the information in this documentation is correct. Ifyou detect any inaccuracies please inform us at the address indicated above. SEH Computertechnik GmbH will notaccept any liability for any error or omission. The information in this manual is subject to change without notification.The original manual is the German version of this document and shall govern. All non-German versions of thisdocument are translation of the original manual.All rights are reserved. Copying, other reproduction, or translation without the prior written consent from SEHComputertechnik GmbH is prohibited. 2018 SEH Computertechnik GmbHAll trademarks, registered trademarks, logos and product names are property of their respective owners.
myUTN User Manual Windows1 General Information. 11.11.21.31.41.5Product .1Documentation .3Support and Service.4Your Safety .4First Steps .52 Administration Methods. 62.12.22.32.4Administration via myUTN Control Center .6Administration via the SEH UTN Manager.8Administration via InterCon-NetTool . 13Administration via Email . 153 Network Settings . 173.13.23.33.43.53.63.73.8How to Configure IPv4 Parameters . 18How to Configure IPv6 Parameters . 20How to Configure WLAN. 21How to Configure the DNS. 23How to Configure SNMP . 23How to Configure Bonjour . 24How to Configure Email (POP3 and SMTP). 25How to Use the UTN Server in VLAN Environments (only myUTN-80 and later). 274 Device Settings . 294.14.24.34.44.54.64.74.8How to Configure the Device Time . 29How to Assign a Description. 29How to Assign a Name to a USB Port. 30How to Disable a USB Port (only myUTN-80 and later). 30How to Configure the UTN (SSL) Port. 31How to Get Messages (only myUTN-80 and later). 31How to Configure Acoustic Signals (myUTN-800 only) . 32How Do I Determine What is Shown in the Display? (myUTN-800 only). 335 Working with the SEH UTN Manager . 355.15.25.35.45.55.65.75.8How to Find UTN Servers/USB Devices in the Network. 35How to Establish a Connection to a USB Device . 37How to Cut the Connection between the USB Device and the Client . 38How to Request an Occupied USB Device. 38How to Automate USB Device Connections and Program Starts . 39How to Find Status Information on USB Ports and USB Devices. 42How to Use the Selection List and Manage User Access Rights with It. 42How to Use the SEH UTN Manager without Graphical User Interface (utnm). 456 Security. 496.16.26.36.46.56.66.7How to Encrypt the USB Connection. 49How to Encrypt the Connection to the myUTN Control Center . 51How to Define the Encryption Strength for SSL/TLS Connections . 51How to Protect Access to the myUTN Control Center (User Accounts) . 53How to Block Ports of the UTN Server (TCP Port Access Control) . 54How to Control Access to USB Devices (only myUTN-80 and later). 55How to Block USB Device Types . 56
myUTN User Manual Windows6.86.9How to Use Certificates . 56How to Configure Network Authentication (IEEE 802.1X) . 607 Maintenance . 637.17.27.37.4How to Restart the UTN Server . 64How to Update. 64How to Backup Your Configuration . 65How to Reset Parameters to their Default Values . 668 Appendix . 688.18.28.38.48.1Glossary . 69Troubleshooting . 70Parameter Lists . 73SEH UTN Manager – Feature Overview. 97Index. 99
myUTN User Manual WindowsGeneral Information1 General Information Product 1Documentation 3Support and Service 4Your Safety 4First Steps 51.1 ProductPurposeUTN servers comprise USB Deviceservers and USB Dongleservers. As USB Deviceservers they make non-networkready USB devices (e.g. USB hard disk drives, USB printers, etc.) and as USB Dongleservers non-network-ready USBdongles accessible via TCP/IP network. For this purpose, the USB devices respectively USB dongles will be connected to the USB ports of the UTN server. Then the UTN (UTN USB to Network) functionality and the corresponding software tool 'SEH UTN Manager' establish a virtual USB connection between USB device respectivelyUSB dongle and client. The USB device respectively USB dongle can be used as if it were connected locally.Important:The Dongleservers myUTN-80 and myUTN-800 are exclusively designed for the deployment of USB dongles.Important:Hereinafter USB dongles and USB devices are referred to as 'USB devices'.System RequirementsThe UTN server has been designed for the use in TCP/IP networks.The SEH UTN Manager runs on the following systems: Windows XP or later except for Windows Vista and Windows Server 2008(For Windows 7 and Windows Server 2008 R2 KB3033929 y/3033929 must be installed.) OS X 10.8.x, OS X 10.9.x, OS X 10.10.x, OS X 10.11.2 and later, macOS 10.12.x and later(OS X 10.11.2 and later: operating system induced limited USB device support. macOS 10.12.x and later: operating system induced limited USB device support.) Linux: *.deb (for Debian-based systems) and *.rpm (for Red Hat-based systems) installation packages are available for 64-bit systems. A successful installation cannot be guaranteed due to the multitude of Linux varieties!The installation must be carried out on your own.In the following 64-bit systems the installation was tested successfully:Debian: Debian 8.10, Debian 9, Ubuntu 14.04, Ubuntu 16.04Red Hat: CentOS 6.9, CentOS 7.4, Fedora 25, Fedora 26, openSUSE Leap 42.3, Oracle 6.9, Oracle 7.4, Red HatEnterprise Linux 7.4, SUSE Linux Enterprise 12.3 IPv4 TCP/IP network1
myUTN User Manual WindowsGeneral InformationImportant:The support of isochronous USB devices (e.g. cameras, microphones, speakers, etc.)depends on the operating system:- Windows- Linux the UTN server model(information can be found in the respective product information) the software version:- firmware/software for UTN servers: 14.5.5 or later- SEH UTN Manager: 3.1.4 or laterThis document describes the usage in Windows environments. Information about the usage in other environments can be found in the relevant system-specific User Manual. More details can be found in chapter ’Documentation’ 3.Combination with Associated ProductsYou can combine the UTN server with additional SEH Computertechnik GmbH products to ideally adapt the useof your devices to your environment!ServiceplusFor the Dongleservers myUTN-80 and myUTN-800 service contracts, the Serviceplus packages, are available. TheServiceplus package extends the manufacturer's guarantee of a Dongleserver from 36 to 60 months. In addition,you will receive quickly and easily an advance replacement device in case of a defect. Serviceplus packages mustbe purchased separately.Detailed s/service-packages.htmlRack Mount KitsFor a perfect and safe storage of your Dongleserver we recommend the 'Rack Mount Kits' (RMK). With the installation kits, you can install the Dongleservers in 19" server racks.Detailed s/rack-mount-kits.html2
myUTN User Manual WindowsGeneral Information1.2 DocumentationPlease load all current documents from our Website:http://www.seh-technology.comFurther applicable documentsThee UTN documentation consists of the following documents:Quick Installation GuidePrint, PDFUser ManualPDFOnline helpHTMLInformation on safety, technical data, instructions forhardware installation and initial setup, and declarationsof conformity.Detailed description of the UTN server configuration andadministration. System-specific instructions for the following systems:- Windows- OS X/macOS- LinuxInformation on how to use the web interface 'myUTNControl Center'.(Embedded into web interface; no download.)Product informationBrochuresOpen source licensesPrint, PDFPrint, PDFonlineFeatures and technical s.htmlSymbols and LegendA variety of symbols and mark-ups are used within this document.WARNINGWarningA warning contains important information that must be heeded. Nonobservance may lead to malfunctions.Important:Important information These notes contain crucial information for failure-free operation. 1. ts that must be met before you can begin the action.ListingStep-by-step instructionsOutcome of a performed actionRecommendations and beneficial advice Reference (Within the document you can use hyperlinks.)BoldEstablished terms (e.g. of buttons, menu items, or selection lists)Code (e.g. for command lines or scripts), PathsSingle quotation marks identify proper namesCourier'Proper names'3
myUTN User Manual WindowsGeneral Information1.3 Support and ServiceSEH Computertechnik GmbH offers extensive Support. If you have any questions, please contact us.Monday through ThursdayFriday8:00 a.m. to 4:45 p.m.8:00 a.m. to 15:15 p.m. 49 (0)521 94226-44support@seh.deAll information and downloads regarding your product is available on our website:http://www.seh-technology.com1.4 Your SafetyRead and observe all safety regulations and warnings found in the documentation, on the device and on the packaging. This will avoid potential misuse and prevent damages to people and devices.Intended UseThe UTN server is used in TCP/IP networks and has been designed for use in office environments. It allows networkusers to access non-network-ready USB devices.Improper UseAll uses of the device that do not comply with the functionalities described in the myUTN documentation are regarded as improper uses.Safety RegulationsBefore starting the initial setup of the UTN server, read and observe the safety regulations in the 'Quick InstallationGuide'. This document is enclosed in the packaging in printed form.WarningsRead and observe all warnings mentioned in this document. Warnings are found before any instructions knownto be dangerous. They are presented as follows:WARNINGWarning!Liability and GuaranteeSEH Computertechnik GmbH will not accept any liability for personal injuries, property damages and consequential damages resulting from the non-observance of the mentioned safety regulations and warnings. Non-observance will also result in any guarantee claims becoming void.4
myUTN User Manual WindowsGeneral InformationModifications to the Device and RepairsIt is not allowed to make modifications to the hardware and software or to try to repair the device. If your deviceneeds to be repaired, contact our support 4.1.5 First Steps1. Read and observe the security regulations in order to avoid damages to people and devices 4.2. Install the hardware. The hardware installation includes connecting the UTN server to the network, USB devices, and power grid ‘ ‘Quick Installation Guide‘.3. Install the software. The software installation includes installing the required software tool 'SEH UTN Manager'on your client and assigning an IP address ‘ ‘Quick Installation Guide‘.4. Configure the UTN server so that it is optimally embedded it into your network and sufficiently protected. Allinformation on how to do this you will find in this document.5. Use the SEH UTN Manager to establish and manage connections to the USB devices which are connected tothe UTN server 35.You can find information on the UTN documentation in chapter’Documentation’ 3.5
myUTN User Manual WindowsAdministration Methods2 Administration MethodsYou can administer, configure and maintain the UTN server in a number of ways: Administration via myUTN Control Center 6 Administration via the SEH UTN Manager 8 Administration via InterCon-NetTool 13 Administration via Email 152.1 Administration via myUTN Control CenterThe UTN server has a user interface, the myUTN Control Center which can be opened in an Internet browser (e.g.Microsoft Edge).The UTN server can be configured, monitored and maintained via the myUTN Control Center. Open myUTN Control Center in Browser 6 myUTN Open Control Center via SEH UTN Manager 6 myUTN Open Control Center via InterCon-NetTool 6 Controls 7Open myUTN Control Center in Browser The UTN server is connected to the network and the power grid. The UTN server has a valid IP address 18.1. Open your browser.2. Enter the IP address of the UTN server as the URL. The myUTN Control Center is displayed in the browser.Important:If the myUTN Control Center is not displayed, check if a gateway is configured ( 18) and the proxy settings of your browser.myUTN Open Control Center via SEH UTN Manager The UTN server is connected to the network and the power grid. The UTN server has a valid IP address 18. The SEH UTN Manager is installed on the client 8.1.2.3. Start the SEH UTN Manager.In the selection list, select the UTN server.In the menu bar, select UTN Server – Configure.Your browser opens and the myUTN Control Center is displayed.myUTN Open Control Center via InterCon-NetTool1.2.3. Start the InterCon-NetTool.In the device list, select the UTN server.In the menu bar, select Actions – Launch Browser.Your browser opens and the myUTN Control Center is displayed.6
myUTN User Manual WindowsAdministration MethodsControls45 61327Figure 1:myUTN Control Center1Menu item2Submenu items34567PageProduct & CompanySitemapFlags? iconAfter selecting a menu item (simple mouse click), the available submenuitems are displayed to the left.After selecting a submenu item, the corresponding page with its contentis displayed.Menu contentManufacturer’s contact details and additional product information.Overview of and direct access to all pages of the myUTN Control Center.Language selectionOnline help7
myUTN User Manual WindowsAdministration Methods2.2 Administration via the SEH UTN ManagerThe 'SEH UTN Manager' is a software tool developed by SEH Computertechnik GmbH. The SEH UTN Manager isused to establish and manage connections to the USB devices connected to the UTN servers. Features 8 Versions 9 Installation 10 Program Start 12FeaturesThe software is installed on all clients that are meant to access a USB device in the network. After the SEH UTNManager is started, the network is scanned for connected UTN servers. All UTN servers found and their connectedUSB devices are displayed in the 'network list'. To use the USB devices connected to the UTN server, you have toadd the UTN server to the 'selection list'. The devices shown in the selection list can be administrated and the connected USB devices can be used. Working working with the SEH UTN Manager is described in detail in the chapter’Working with the SEH UTN Manager’ 35.WARNINGUTN ( 1) and the corresponding SEH UTN Manager only work in IPv4 networks.In IPv6-only networks only the myUTN Control Center ( 6) can be accessed toadministrate the UTN server.13254Figure 2:SEH UTN Manager8
myUTN User Manual Windows12345Menu barSelection ListButtons for editing the selection listButtons for managing theport connectionDisplay area for the propertiesAdministration MethodsAvailable menu itemsShows the selected UTN servers and the connected USB devices.Opens the dialog for searching UTN servers in the network and for selecting the desired devices 35.Establishes a connection to the USB device connected to the USB port ( 37) or interrupts the connection ( 38).Shows information on the selected UTN server or USB device 42.Detailed information on how to use the SEH UTN Manager can be found in the 'SEH UTN Manager OnlineHelp'. To start the online help, go to the SEH UTN Manager menu bar and select Help – Online Help.Important:Some SEH UTN Manager features might not be displayed or are displayed as inactive. This depends on the type and location of the selection list the user's rights and the group memberships on the client the client operating system the settings of the product-specific security mechanisms the status of the UTN server and respective USB portMore details can be found in chapter ’SEH UTN Manager – Feature Overview’ 97.VersionsThe SEH UTN Manager is available in two versions: Complete Version:SEH UTN Manager with graphical user interface ( Figure 2 8) and additional features. Minimal version (without graphical user interface):Usage only via command line ('utnm' 45) and automated programs ('UTN Actions' 39).Important:The complete version is recommended for general use.The minimal version is to be used by experts only!In both versions the 'SEH UTN Service' works in the background and is automatically active after the system start.The service can be controlled by means of the usual administration methods.Additionally, the following user groups are distinguished: users with administrative rights (administrator) users without administrative rights (standard user)Important:Some features can only be configured by administrators. More details can befound in chapter ’SEH UTN Manager – Feature Overview’ 97.9
myUTN User Manual WindowsAdministration MethodsInstallationIn order to use the SEH UTN Manager, the program must be installed on a computer with a Windows operatingsystem. The SEH UTN Manager installation file can be found on the SEH Computertechnik GmbH nloads.htmlThe installation file is available as '*.exe' for Windows systems. The file contains both versions of the SEH UTN Manager. Instead of the standard installation, an unattended installation may be carried out. ’Standard Installation’ 10 ’Unattended Installation’ 10Standard Installation The SEH UTN Managers installation is suited for Windows XP or later except for Windows Vista and WindowsServer 2008.(For Windows 7 and Windows Server 2008 R2 KB3033929 must be installed y/3033929.) The installation can only be carried out by users with administrative rights.1. Start the SEH UTN Manager installation file.2. Follow the installation routine. The SEH UTN Manager is installed on your client.If used in server-based environments (Citrix XenApp, Microsoft Remote Desktop Services/Terminal Services) andvirtualized environments (VMware, Citrix XenDesktop, Microsoft HyperV, etc.) the Windows system may lack required drivers. The installation routine checks the available drivers during the installation process. If drivers aremissing, another installer ('USB driver for SEH UTN Manager'). This installer will prepare the installation of the required drivers.Unattended InstallationAn unattended installation takes place without any time-consuming user input. In addition, the SEH UTN Manager UTN Manager can be automatically installed on a large number of clients via login scripts. For more information,refer to the documentation of your operating system.Default settings used: Complete version Installation for all users of the client Target directory: %PROGRAMFILES%\SEH Computertechnik GmbH\SEH UTN Manager(Where %PROGRAMFILES% is a Windows environment variable for the 'Programs' folder. By means of the command line, the path can be determined as follows: echo %PROGRAMFILES%) Start menu folder: SEH Computertechnik GmbH\SEH UTN Manager A desktop shortcut will be created. SEH UTN Manager will start automatically after the installation.10
myUTN User Manual WindowsAdministration Methods The SEH UTN Managers installation is suited for Windows XP or later except for Windows Vista and WindowsServer 2008.(For Windows 7 and Windows Server 2008 R2 the following must be installed: KB3033929 y/3033929 and hotfix 2921916 install-a-driver-i.) The installation can only be carried out by users with administrative rights.Important:By installing the SEH UTN Manager, you automatically accept the SEH Computertechnik GmbH agreement concerning the license and the use of the software. Theagreement can be found on the website of SEH Computertechnik es.html1. Open the command-line interface.2. Change to the directory containing the SEH UTN Manager installation file.3. Enter the command sequence: "sehutnmanager-win-X.X.X.exe" /S [ command ]Commands: Table 1 11.4. Confirm your entry. The sequence of commands will be run.Table 1:Installation commandsCommandDescription/AInstalls SEH UTN Manager for all users.Installs SEH UTN Manager for the current user only.Overrides the default folder name of the Start menu folder. Subfolders can bespecified with '/'.Installs the complete version ( 10) of SEH UTN Manager.Recommended for general use.Overrides the default installation directory. An absolute path must be specified.It has to be the last parameter used in the command line and must not containany quotes, even if the path contains spaces.Does not create a desktop shortcut.Installs the minimal version ( 10) of SEH UTN Manager.Expert use only!Runs SEH UTN Manager after the installation is complete.Instructs the installation to be silent. There is no user interaction and the usercannot cancel the installation.Updates an existing SEH UTN Manager.(If no SEH UTN Manager is installed, it will be installed using the default installation settings.)Enables command line logging to troubleshoot installation problems.Creates a log file in the installation folder. The file contains information to troubleshoot installation problems.Enables command line logging and creates a log file in the installation directory. Both provide information to help troubleshoot installation issues.Shows the help page./C/F folder name /G/I path /K/M/R/S/U/V1/V2/V3/?11
myUTN User Manual WindowsAdministration MethodsProgram StartYou recognize the SEH UTN Manager by its icon:erating system. The program is started with the usual methods of your op-UpdateYou can check for program updated manually and automatically. More information can be found in the 'SEHUTN Manager Online Help'.12
myUTN User Manual WindowsAdministration Methods2.3 Administration via InterCon-NetToolThe InterCon-NetTool is a software tool developed by SEH Computertechnik GmbH for the administration of SEHnetwork devices (print servers, TPG, UTN servers and so on). Depending on the network device you can performdifferent actions with the InterCon-NetTool. Function 13 Installation 14 Program Start 14FunctionAfter the InterCon-NetToolhas been started, the network will be scanned for connected network devices. The network range to be scanned is freely definable. All network devices found will be displayed in the 'device list'. Youcan
Debian: Debian 8.10, Debian 9, Ubuntu 14.04, Ubuntu 16.04 Red Hat: CentOS 6.9, CentOS 7.4, Fedora 25, Fedora 26, openSUSE Leap 42.3, Oracle 6.9, Oracle 7.4, Red Hat Enterprise Linux 7.4, SUSE Linux Enterprise 12.3 † IPv4 TCP/IP network Important: The Dongleservers myUTN-80 and myUTN-800 are
The Windows The Windows Universe Universe Windows 3.1 Windows for Workgroups Windows 95 Windows 98 Windows 2000 1990 Today Business Consumer Windows Me Windows NT 3.51 Windows NT 4 Windows XP Pro/Home. 8 Windows XP Flavors Windows XP Professional Windows XP Home Windows 2003 Server
AutoCAD 2000 HDI 1.x.x Windows 95, 98, Me Windows NT4 Windows 2000 AutoCAD 2000i HDI 2.x.x Windows 95, 98, Me Windows NT4 Windows 2000 AutoCAD 2002 HDI 3.x.x Windows 98, Me Windows NT4 Windows 2000 Windows XP (with Autodesk update) AutoCAD 2004 HDI 4.x.x Windows NT4 Windows 2000 Windows XP AutoCAD 2005 HDI 5.x.x Windows 2000 Windows XP
A computer with at least a 450MHz Pentium CPU with 128 MB of RAM, running Windows 2000, Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, Windows 8/8.1, Windows 10, Windows Server 2012, Windows Server 2016 or Windows Server 2019 platforms. Instal
Morphy Richards Fastbake Breadmaker 48280 User Manual Honda GCV160 User Manual Canon Powershot A95 User Manual HP Pocket PC IPAQ 3650 User Manual Navman FISH 4200 User Manual - Instruction Guide Jensen VM9021TS Multimedia Receiver User Manual Sanyo SCP-3100 User Manual Honda GC160 User Manual Canon AE-1 Camera User Manual Spektrum DX7 User Manual
Windows 8.1 *6 Windows Server 2003 *7 Windows Server 2008 *8 Windows Server 2012 *9 Mac OS X *10: Supported *1 Printer drivers support both 32-bit and 64-bit Windows. *2 Microsoft Windows XP Professional Edition/Microsoft Windows XP Home Edition *3 Microsoft Windows Vista Ultimate/Microsoft Windows Vista Enterprise/Microsoft Windows Vista Business/
- 32 & 64 bit Windows 7, Windows 8 & Windows 10 - 32 & 64 bit Windows 2008 Server - Windows 2008 Server R2 - Windows Server 2012 - Windows Server 2012 R2 - Windows Server 2016 NOTE: Microsoft .Net Framework 4.5 is required on all o
Ademco Passpoint Plus User Manual Morphy Richards Fastbake Breadmaker 48280 User Manual Honda GCV160 User Manual Canon Powershot A95 User Manual HP Pocket PC IPAQ 3650 User Manual Navman FISH 4200 User Manual - Instruction Guide Jensen VM9021TS Multimedia Receiver User Manual Sanyo SCP-3100 User Manual Honda GC160 User Manual Canon AE-1 Camera .
year [s ATSMUN, in my beloved hometown Patras, I have the honour to serve as Deputy P resident of the Historical Security Council, a position I long to serve with major gratitude an d excitement, seeking to bring out the best. In our committee I am highly ambitious to meet passion ate young people with broadened horizons, ready for some productive brainstorming. In this diplomatic journey of .
