753/754 - Res.cloudinary

753/754Documenting Process CalibratorUsers ManualJuly 2011 2011 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.All product names are trademarks of their respective companies.

LIMITED WARRANTY AND LIMITATION OF LIABILITYThis Fluke product will be free from defects in material and workmanship for three years from the date of purchase. Thiswarranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, orabnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf.To obtain service during the warranty period, contact your nearest Fluke authorized service center to obtain returnauthorization information, then send the product to that Service Center with a description of the problem.THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULARPURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL ORCONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countriesdo not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation ofliability may not apply to you.Fluke CorporationP.O. Box 9090Everett, WA 98206-9090U.S.A.11/99Fluke Europe B.V.P.O. Box 11865602 BD EindhovenThe Netherlands

Table of ContentsTitlePageIntroduction .How to Contact Fluke .Safety Information .Standard Equipment.Functions.Get Started.Operation Features .Input and Output Jacks.Buttons .Display.Strap and Stand.The Battery.Charge the Battery .Battery Charge Level.Battery Life .i1125810121214172021212222

753/754Users ManualPreserve Battery Life .The Battery Charger .Display Languages .Display Intensity.Date and Time .The Backlight .Personalize the Product.Measure Mode.Measurement Ranges.Electrical Parameter Measurement.Continuity Test .Pressure Measurement.Temperature Measurement .Thermocouple Use.Resistance-Temperature Detectors (RTDs) .Measurement Scale .Linear-Output Transmitters .Square-Law Process Variables .Measure or Source with Custom Units.Using the 700-IV Current Shunt .Damping Measurements.Source Mode .Source Electrical Parameters .4 to 20 mA Transmitter Simulation.Supply Loop Power.Source Pressure .Thermocouple Simulation .RTD Simulation.Source Temperature with a Hart Scientific Drywell 74951545558

Contents (continued)Source Scale .Linear-Responding Transmitters.Square-Root Process Variables.Step and Ramp the Output Value.Manual Step Use .Auto Step Use.Ramp the Output .Simultaneous Measure/Source .Process Instrument Calibration .Generate “As Found” Test Data .Transmitter Adjustment .“As Left” Test Run .Test Comments .Calibrate a Delta-Pressure Flow Instrument .Switch Calibration.Transmitter Mode .Memory Operations.Save Results .Review the Memory.Log Data.Record Min and Max Measurements.Run a Preloaded Task.Clear the Memory .The Calculator .Save to and Recall from the Registers .Use the Calculator to Set the Source Value .Quick Guide to Applications .Communication with a PC 79828285868686878787100100

753/754Users ManualBattery Replacement .Clean the Product .Calibration Data .In Case of Difficulty .Service Center Calibration or Repair .User-Replaceable Parts.Accessories .Specifications .General Specifications.Environmental Specifications .Standards and Agency Approval Specifications.Detailed Specifications .DC mV Measurement .DC Voltage Measurement.AC Voltage Measurement .DC Current Measurement .Resistance Measurement .Continuity Testing .Frequency Measurement . DC Voltage Output. DC Current Source . DC Current Simulate (External Loop Power) .Resistance Sourcing .Frequency Sourcing.Temperature, Thermocouples.Temperature, Resistance Temperature Detectors .Loop 107108108108109109110110110111112114115

List of bols.Summary of Source and Measure Functions .Input/Output Jacks and Connectors .Buttons .Elements of a Typical Display .Typical Battery Life.Thermocouple Types Accepted.RTD Types Accepted .Simultaneous MEASURE/SOURCE Functions with Loop Power Disabled .Simultaneous MEASURE/SOURCE Functions with Loop Power Enabled.Duration Limits .Replacement Parts .v49121519223638666783102

753/754Users Manualvi

List of itlePageStandard Equipment.Jumper Connections .Measure/Source Example .Input/Output Jacks and Connectors .Buttons .Elements of a Typical Display .Stand Use and Strap Attachment .Battery Removal and Charger Use.Time and Date Display .Edit the Date Format .Personalize the Product .Electrical Measurement Connections .Gage and Differential Pressure Modules.Pressure Measurement Connections .Temperature Measurement with a Thermocouple.vii61111131418202326262730323437

753/754Users .31.32.33.34.35.36.37.38.39.40.41.42.43.44.Correct Jumper Use.Temperature Measurement with an RTD.Electrical Source Connections .Connections fo Simulate a 4 to 20 mA Transmitter.Connections to Supply Loop Power .Connections to Source Pressure .Connections to Simulate a Thermocouple .Connections to Simulate an RTD.Source Temperature with Drywell .Ramp Screen.Check a Relay Output Trip Alarm .Measure and Source Screen .Process Instrument Calibration Screen.Process Instrument Calibration Screen 2.Calibrate a Thermocouple Temperature Transmitter .Calibration Parameters Screen.Measure and Source Screen for Calibration .Error Summary Screen .As Left Data Screen.Switch Terminology .Saved Data Screen.Additional Data Input Screen .Alphanumeric Entry Window.Memory Review Screen.Data Log Parameters Screen .

How to Contact Fluke To contact Fluke, call one of the following telephone numbers: Technical Support USA: 1-800-44-FLUKE (1-800-443-5853) Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853) Canada: 1-800-36-FLUKE (1-800-363-5853) Europe: 31 402-675-200 Japan: 81-3-3434-0181 Singapore: 65-738-5655