Tecstrut Channel Suspension & Framing System
lindabI theventilation products specialistTecstrut Channel Suspension& Framing System Complies with HVCA specification DW144.Manufactured from corrosion resistant materials.Channels produced in accordance with BS EN 10162: 2003System complies with BS6946 (1988).Comprehensive range of components & accessories.Ex-stock availability throughout the U.K.
DescriptionChannelsThe Lindab channel suspension and framing system isdesigned to provide an effective yet economicalsolution to today’s framing and support requirements.High quality materials are used throughout and thesystem complies with relevant industry standardsincluding:BS EN 10162: 2003 - All channels in the Tecstrutsystem are manufactured to comply with the tolerancesdetailed in this standard.BS 6946: 1988 - The data provided takes intoaccount the requirements of this standard for testing ofchannel, fittings and channel nuts.BS EN ISO 1461: 1999 - Where appropriate fittingsand bracketry are post hot dip galvanised to thisstandard.BS EN 10327: 2004 - Channels are manufacturedfrom pre-galvanised steel to this specification.Channel Slotting - 1.6mm sections35mm11mm35mm35mm20mmChannel Slotting - 2.5mm sections50mm11mm50mm50mm25mmChannel OptionsIn addition to the channel sections shown opposite amultiple channel sections is available. This comprisestwo channels welded ‘back to back’TSP-442D - 41mm x 41mm x 2.5mm x 2Multiple channel sections are produced by spot weldingtogether two individual pre-galvanised channels at150mm centres. Welds are then protected by theapplication of corrosion inhibiting paint.
Channel Slide NutsNo Drill AnchorsAvailable for M6, M8, M10 and M12 threadings.Manufactured from steel, zinc plated.Threaded RodTecstrut channel slide nuts and springs are self aligningand are specially manufactured to complement therange of Tecstrut channels. The slide nut can be movedalong the channel for ease of alignment whilst thesprings tension the nut against the internal channel lipsto facilitate installation. In addition to the shape of theslide nuts prevents turning inside the channeleliminating the need to grip the nut whilst insertingbolts or threaded rod.Nuts are available threaded M6, M8, M10 and M12,all zinc plated.TSSN-LLong springTSSN-S Short springTSSNNo springSprings are also available separately.Top PlatesThreaded rod is manufactured from mild steel, zincplated. Supplied in 3 metre lengths and available in M6,M8, M10 and M12 sizes.Hexagonal Studding ConnectorsConnectors are available to reduce wastage to aminimum.Hexagonal Head Set ScrewsZinc Plated.M6 x 20, 25, 30, 35, 40mm.M8 x 20, 25, 30, 35, 40mm.M10 x 20, 25, 30, 35, 40mm.M12 x 20, 25, 30, 35, 40mm.Hexagonal Full Nut (8.8HT)Ribbed rectangular washers designed to fit over theslotted channel.Manufactured from 2.5mm corrosion resistantgalvanised mild steel. 11mm diameter hole.Wedge NutsZinc Plated. M6, M8, M10, M12.WashersLock Washers and Flat Washers, M6, M8, M10, M12Penny Washers M6, M8, M10 x 30mm od.All zinc plated.Cone Pointed Set ScrewsZinc Plated. M10 x 40mm.Manufactured from steel, zinc plated.For suspending services from profiled steel shuttereddecking. Available to suit 6, 8, 10 and 12mm threadedrod.Roofing Nuts and BoltsZinc Plated. M6 x 20, M6 x 40, M8 x 25.
Tecstrut FittingsAll fittings are generally manufactured from 6mm thick steel strip and hot dip galvanised to BSENISO1461:1999 unlessotherwise indicated. Standard hole diameter 14mm. NOTE: All weights and dimensions approximate.
Tecstrut Fittings
71.862.65Notes:1. The above data is based upon plain sections throughout. Where slottedchannels are used multiply load from table by 0.8.2. Data is based upon uniformly distributed loads. If the load is concentrated atthe centre of a span multiply load from table by 0.5 and deflection by 0.8.3. Stress 182N/mm2. Recommended when deflection is not critical, especiallyon longer spans.4. Deflection 1/180 of span. Recommended when deflection should belimited.5. Deflection 1/360 of span. Recommended when deflection needs to beimperceptible.6. Channel Nut Loadsresistance to slip (2.5mm channels) - 16.5 KN maximum.Pull-out strength (2.5mm channels) - 24.7KN maximum. (Bolt size M10.Torque 70Nm).N.B. The above data is calculated, not tested.Main axis angle xaxis incentroid ea of crosssection oment ofInertia x/y incentroid (cm4)MaximumColumnLoading-KG1308051352113-xUniform Load@max deflection of1/360 of 5)Weightkg/mUniform Load@max deflection of1/180 of span-KG2001351038268524134Span ionReferenceSection PropertiesUniform Load@182N/mm2-KG(Deflection-mm)Load Data0.7694.3661.0246.363
Spring Steel FastenersBeam Clip Threaded Rod HangerPart no.FlangeRod 8kg68kgVertical Flange Threaded Rod HangerPart no.FlangeRod 2-10MTZ Purlin Threaded Rod HangerPart no.FlangeRod 45kg45kg45kgAllows perpendicular suspension for a variety ofsupport systems.Beam Clip Strap HangerPart mm25mm25mm25mm72kg90kg90kgRight Angle Strap HangerPart -16mm25mm25mm25mm72kg90kg90kgPre-assembled strap hanger and horizontal beam clipfor up to 25mm strap, for either parallel or right angleinstallation.Straight and Right Angle Strap HangerPart no.RHS-SHM6StrapS.Load25mm90kg25mm90kgRight Angle Strap HangerRHA-SHM6Easily mounted to wood, metal or concrete structural memberswith screws, bolts etc.Notes:1. Fasteners are protected by a zinc rich finish whichincorporates an organic resin coating providing an excellentbarrier to moisture and heat. Fixings are coated to athickness of 10-12 microns to BS7371,Parts 1, 2 and 11:1981.2. Static loads given are based on tests up to x3 values listed.
Slotted Support BandingFlexible Duct Insulating StripManufactured from corrosion resistant galvanised mildsteel strip 0.9mm thick, and supplied in 30 metre coils.The elongated holes are punched at 30mm pitch tosimplify alignment and fixing. Complies with therequirements of DW144.A highly versatile insulation system manufactured fromhigh density phenolic foam which provides a new andimproved solution to the requirement for structuralinsulation where ducts and pipes are supported.Fire resistant - Class ‘O’ rating.Note: Also available for rectangular ducting. Please askfor our detailed literature for further information.Split RingsThreaded RodManufactured from mild steel flat bar, drilled forclamping and zinc plated for a corrosion resistant finish.Threaded rod is manufactured from mild steel, zincplated. Supplied in 3 metre lengths and available in M6,M8, M10 and M12 sizes. Studding connectors are alsoavailable to reduce wastage to a minimum.LINDAB Ltd10 Woodall Road, Redburn Industrial Estate, Enfield, EN3 4LETel: 020 8805 3656 Fax: 020 8805 0558 E-mail: sales@lindab.co.uk Internet: www.lindab.co.ukEast LondonNorth LondonSouth LondonBasildonBelfastBirminghamBradford020 7474 5102020 8805 3656020 8603 085001268 53201602890 7816070121 552 610001274 721982BristolCambridgeCardiffExeterGlasgowHigh WycombeKent0117 977 134501954 252503029 2043 793001626 8350320141 419 380001494 46349001474 579800LeedsLeicesterLincolnManchester (Trafford Park)Manchester (Swinton)NewcastleNottingham0113 297 11110116 255 604401522 5670870161 876 06880161 727 52000191 414 08880115 985 rent0114 244 5444023 8026 211101642 60114401782 383460Every effort is made to ensure that the information contained in Lindab literature, drawings and correspondence is accurate, but nowarranty is given in this respect and the Company shall not be liable as a result of any inaccuracy. The Company reserve the right toalter at anytime, without prior notice, the design, specification, packaging or price of any article and without incurring any obligation.Ref: 123/1007www.lindab.co.uk
2500 3000 500 750 1000 1250 1500 2000 2500 3000 500 750 1000 1250 1500 2000 2500 3000 500 . 2000 2500 3000 500 750 1000 1250 1500 2000 2500 3000 200 (1.8) 135 (4.0) 103 (7.0) 82 (11.0) 68 (16.3) 52 (29.0) 41 (44.5) 34 (65.5) 655 (1.0) 435 (2.3) 331 (4.0) 257 (6.1) 216 (9.0) 159 (16.0) 130 (25.0) 108 (35.6) 268 (1
Fundmentals of building construction (2nd ed.). New York: Wiley & Sons. Framing Methods, Exterior Wall Construction FRAMING METHODS The most common framing systems used with wood are: Balloon Platform Post and beam . Framing Methods, Exterior Wall Construction BALLOON FRAMING (EASTERN) Is not widely used except for gable
construction ( 62 ), Second-story framing ( 64 ), Window and door framing ( 64 ). 37 Chapter 3 FRAMING AND CLOSING IN . Framing and Closing In The sections contained in this chapter address the tasks
The major work that first distilled the idea of framing was Erving Goffman’s 1974 book Frame Analysis: An Essay On The Organization Of Experience. Goffman’s definition of a frame is: Framing Framing 2 “I assume that definitions of a situation are built up in accordance with principals of
FRAMING Build efficiently, use less material, and save energy! Advanced framing refers to a variety of framing techniques designed to reduce the amount of lumber used and waste generated in the con struction of a wood-framed house. ADVANCED FRAMING These techniques include Designing homes on 2-foot mod ules to make
3.1 Background on Framing Analyses While agenda-setting broadly refers to what topics a text covers, framing refers to which attributes of those topics are highlighted. Several aspects of framing make the concept difficult to analyze. First, just defining framing has been “notoriously slippery”(Boydstunetal.,2013).Framescanoccur
9.2 Hutch 9700 Suspension Kits 9.2 Hutch 9700 Suspension Kits 9.2.1: HUTCH 9700 SUSPENSION KITS 9.2.1.1: EXPLODED VIEW OF HUTCH 9700 SUSPENSION KIT 9.2.1.2: DETAIL OF HUTCH 9700 SUSPENSION KIT Note: Springs are not included in suspension kits Other kits are available Part Number Type Hanger Type Axle Spring Seat Height Comments
CertainTeed Ceilings Drywall Suspension System main runners provide slots 8" on center. Each slot has two additional offset slots- each is 1-3/4" from the center slot. These additional offset slots allow for integration with Type F fixtures. Use the center slot for typical cross tee installation.File Size: 1MBPage Count: 24Explore further1 1/2" Drywall Suspension System - Ceilings and Walls .www.certainteed.comDrywall Suspension System - Drywall, Ceiling & Flooring .www.usg.comDrywall Grid System Armstrong Ceiling Solutions .www.armstrongceilings.comUSG Drywall Suspension Systemwww.usg.comRecommended to you b
The colonial response to these acts is really the start of the American Revolution. First Massachusetts passed a set of resolutions calling for colonists to: one, disobey the Intolerable Acts, two, stop paying taxes, and three, prepare for war. And in September 1774, a group of delegates from twelve of the thirteen colonies - Georgia! - met in Philadelphia to coordinate the resistance of the .
