ASTRO Digital Spectra And Digital Spectra Plus W4, W5, W7, And W9 .
ASTRO Digital Spectra andDigital Spectra PlusW4, W5, W7, and W9 Mobile RadiosUser Guide
Motorola, Inc.8000 West Sunrise BoulevardFt. Lauderdale, FL 33322MOTOROLA, the Stylized M Logo, ASTRO and Spectra areregistered in the U.S. Patent and Trademark Office. All otherproduct or service names are the property of their respective owners. Motorola, Inc. 2002.All rights reserved. Printed in U.S.A.*6881076C25*6881076C25-D
ASTRO Digital Spectra and Digital Spectra PlusW4 Mobile RadioQuick Reference CardPAGEorSECUREorEMERGENCYBASIC OPERATIONTurn the Radio On and OffRotate the Vol (Volume) knob clockwise.Set the Volume and Squelch1 Turn the Vol knob clockwise to increase volume orcounterclockwise to decrease volume as desired.Page2 On conventional modes with Private-Line or DigitalPrivate-Line, press Mon or remove the microphonefrom the hang-up clip to defeat the coded squelch.Emer3 Press Mon again, or replace the microphone on thehang-up clip to return to coded-squelch /LIGHTSPhonScanCallDirSelModeH/LMonChange ModesBUSYMic6 Press Home.VolumeXMITDimPwrTurn the Mode knob to select the desired MODE POWER ON/OFF/KNOB VOLUME KNOB1 Press Dir (Direct). The Dir indicator lights.2 Press Dir again to return to repeater operation.Activate Scan1 Press Scan to start a scan. If no activity exists, thedisplay shows your selected mode. When a scannedchannel or talkgroup becomes active, the displayshows the active mode name. The PRI and NPRIindicators show priority.2 Press Scan again to stop scanning.Program a Scan List4 To adjust squelch level, hold Mon until a tone sounds.5 Turn Mode knob to select squelch level.HomeTransmit (Conventional Modes)1 Hold Scan until a tone sounds and the scan indicatorblinks.2 Turn the Mode knob to select the mode you want toprogram.3 Press the Sel button as indicated in the table below toadd or remove the displayed mode from the scan list.4 Repeat the previous steps to continue editing the list.OR5 Press Home or Scan to exit.Press Home to access the preprogrammed Homemode.Press SelModeIndicatorOne timeNon-PriorityNPRI litTwo timesSecond PriorityPRI litThree timesFirst PriorityPRI blinksFour timesDelete from ListNo indicatorTransmit1 Press and hold the microphone PTT button.2 When the transmit light comes on solid and no alerttones sound (or a talk-permit tone or ID sidetonesounds), speak into the microphone in a normal voice.3 State your FCC call sign at the beginning of eachtransmission.Select Scan Mode Priority1 Press the Sel button as indicated in the table aboveto designate up to two modes as priorities.2 Press Home or Scan to end scan list selection.
Send an Emergency Alarm or CallPress the emergency actuator (Emer button,footswitch, hidden pushbutton) to begin anemergency transmission.For conventional modes, a silent or non-silentemergency alarm data transmission is sent.For trunked modes, emergency call (priority accessto a voice channel), silent or non-silent emergencyalarm, or emergency alarm and call is entered.Depending on your radio’s programming, one of theemergency sequences described in the table belowoccur.Alarm TypeIndications/ActionsNon-SilentA tone sounds and the displayalternates between EMERGNCY and thezone/channel. When acknowledged,four more tones sound and the displayshows ACK RCVD, then the radioreturns to normal operation.SilentThe audio is muted and no displaychanges take place during the alarm.Press the PTT button, or press andhold the emergency switch to stop theemergency condition and unmute theradio.Call (TrunkedModes only)A tone sounds and the displayalternates between EMERGNCY and thezone/channel.Press the PTT button and talk.After completing the call, press andhold the emergency actuator until atone sounds to return to normaloperation.Alarm TypeIndications/ActionsAlarm and CallAfter ACK RCVD (see Non-Silent Alarmabove) is displayed, the radio haspriority voice-channel access.Press the PTT button and talk.After completing the call, press andhold the emergency actuator until atone sounds to return to normaloperation.Send a Status Transmission1 Press Sts. The last acknowledged status or firststatus name is displayed.2 Rotate Mode to select other statuses.3 Press Sel to send the transmission. The displayflashes the selected status/message name until thedispatcher acknowledges, at which time alert tonessound and ACK RCVD is displayed. The radio thenreturns to normal operation.Send a Direct-Entry Keyboard StatusTransmissionPress the appropriate Sts # button you wish to send.The associated indicator blinks until anacknowledgment is received, then it lights steadily.Send a Direct-Entry Enhanced PrivateConversation Call1 Press Sel or the PTT button. A single tone soundsand the display changes to PLS WAIT, followed bytelephone-type ringing if the receiving unit is inservice.2 If the receiving unit answers, press the PTT button toidentify yourself and proceed with your call.ORIf the called unit does not respond, press Sel or thePTT button again to leave a Call Alert page messageand your ID.A single tone followed by four tones sounds if thecalled unit acknowledges the page.Initiate a Call Alert Page1 Press the Page button.2 Follow the instructions for initiating a PrivateConversation to select a unit ID.3 Press Sel or the PTT button to send a Call Alert pageto the displayed ID,ORTo send a Call Alert page following an EnhancedPrivate Conversation attempt, follow the instructionsfor sending a direct-entry Enhanced PrivateConversation call.Answer a Call Alert PageFour tones sound and PAGE RCV flashes on thedisplay. The tone and display repeat every fiveseconds.1 Press the PTT button,ORInitiate an Enhanced Private Conversation call to thecaller.
Select a Zone/Mode (Optional)1 Press the Zone Up button or Zone Down buttonto scroll to the desired zone.Select a Key Index1 Press and hold the D button until a tone sounds.DISPLAY AND LIGHT INDICATORSDisplay/LightMeaningBUSY light onDisplayed conventional mode hasactivity on it, or selected trunkedsystem is currently busy. Wait forcallback.XMIT light onIndicates you are transmitting.Dir indicator litRadio is in direct (mobile-tomobile) operation.PRI, NPRIindicators litMode displayed is in scan list withthe indicated priority level.P displayedTelephone dialing pause. PressSel to continue the dialing.NO ACK displayedUnit being called with theEnhanced Private Conversation orCall Alert Page feature is not inservice, or emergency alarm orstatus/message transmission isnot acknowledged by dispatcher.NO ANSWRdisplayedUnit being called with EnhancedPrivate Conversation or Call AlertPage does not respond, but isoperational.4 Turn the Mode knob to select desired key.EMERGNCYdisplayedRadio is in emergency alarm or callstate.5 Press Sel to select key.NO EMERGdisplayedA mode incapable of emergencytransmission has been selected.6 Press Home or the PTT button to quit.OUT RNG displayedRadio is out of range of thetrunking system.2 Turn the Mode knob to scroll to INDX SEL.2 Turn the Mode knob to select the mode.3 Press Sel to enter the Index Selection Menu.Select a Home Zone/Home Mode4 Turn the Mode knob to select desired index.5 Press Sel to select index.Press the Home button.6 Press Home or the PTT button to quit.Select Secure ModePress and release the D button. The D indicatorlights up.Erase an Encryption Key1 Press and hold the D button until a tone sounds.2 Turn the Mode knob to scroll to ERASE KY.Select an Encryption Key3 Press Sel to enter the Key Erase Menu.1 Press and hold the D button until a tone sounds.4 Turn the Mode knob to select desired index.2 Turn the Mode knob to scroll to KEY SEL.5 Press Sel to select index.3 Press Sel to enter the Key Selection Menu.6 Press Home or the PTT button to quit.
ALERT TONESType of ToneALERT TONES (Continued)ExplanationType of ToneNameExplanation1 Low-PitchedToneInvalid KeyAlertNameFeature buttonpressed is not validin selected mode, ora Call Alert oremergency alarmwas notacknowledged.3 Short HighTones (afterrequesting abusy channel)upon pressingthe PTT button)Automatic CallBack or TalkPermitChannel is availablefor previouslyrequestedtransmission.System is acceptingyour transmission.1 High-PitchedToneCentralAcknowledgeor Valid KeyCentral controllerhas received requestfor Call Alert oremergency alarmtransmission.You pressed a validkey.Low-PitchedTone (uponpressing thePTT buttonduring Transmit)(OperationError)Talk Prohibit/Out-of-Rangeor Time-OutTimer or IllegalMode4 High-PitchedTonesDispatcher orMobile UnitAcknowledgeDispatcher isacknowledging youremergencytransmission. Mobileunit has receivedyour Call Alert.Out of trunked radiosystem range orsystem is out ofservice.Present transmissionwill soon be disabled.You have entered amode where normalsystem traffic will bemissed, or youattempted somethingthat is not allowed.(See examplesbelow.)5 High-PitchedTonesThe above twoacknowledge tones,heard in tandem.2 High-PitchedTonesPrivateConversationYou have anincoming call. PressCall, then the PTTbutton, then talk.4 High-PitchedTones every 6secondsCall Alert PageCall Alert page hasbeen received.Phone-TypeBusy Tone(when pressingthe PTT button)System BusyAll system radiochannels in use.Release the PTTbutton, and wait forcallback.High-PitchedFailsoftTone every 10seconds inunmuted receiveconditionSystem centralcontroller failure. Theradio reverts fromtrunked operation tooperation similar to aconventionalrepeater.Others may sharethe channel.Examples: Not exiting phone mode after a call (radiocannot receive fleet or subfleet calls), transmitting inreceive-only conventional mode, trying to select a dynamicmode when no dynamic ID assignment has been made.
ASTRO Digital Spectra and Digital Spectra PlusW5 Mobile RadioQuick Reference CardPAGEorSECUREorEMERGENCYPOWERON/OFF MODEPress the PWR button once.Set the Volume and Squelch1 Hold the Vol rocker switch down to increase ordecrease volume as desired, then release.The display shows volume levels from 0 to 15.3 Press Mon again, or replace the microphone on thehang-up clip to return to coded-squelch operation.EmerSCANSELECTPHONECALLPhonScanCall4 To adjust squelch level, hold Mon until a tone sounds.5 Press the Mode rocker switch to select squelch level.6 Press HOME.SelVolXMITDIMMicTurn the Radio On and Off2 On conventional modes with Private-Line or DigitalPrivate-Line, press Mon or remove the microphonefrom the hang-up clip to defeat the coded squelch.PagePWRModeBASIC OPERATIONBUSYH/LMonDirChange ModesTransmit (Conventional Modes)1 Press Dir (Direct). The Dir indicator lights.2 Press Dir again to return to repeater operation.Activate Scan1 Press Scan to start a scan. If no activity exists, thedisplay shows your selected mode. When a scannedchannel or talkgroup becomes active, the displayshows the active mode name. The PRI and NPRIindicators show priority.2 Press Scan again to stop scanning.Program a Scan List1 Hold Scan until a tone sounds and the scan indicatorblinks.2 Press the Mode rocker switch to select the mode youwant to program.3 Press the Sel button as indicated in the table below toadd or remove the displayed mode from the scan list.HOMEPress the Mode rocker switch to select the RIORITYINDICATORSHORN/LIGHTSDIRECTMONITORORPress HOME to access the preprogrammed Homemode.Transmit4 Repeat the previous steps to continue editing the list.5 Press HOME or Scan to exit.Press SelModeIndicatorOne timeNon-PriorityNPRI litTwo timesSecond PriorityPRI litThree timesFirst PriorityPRI blinksFour timesDelete from ListNo indicator1 Press and hold the microphone PTT button.2 When the transmit light comes on solid and no alerttones sound (or a talk-permit tone or ID sidetonesounds), speak into the microphone in a normal voice.3 State your FCC call sign at the beginning of eachtransmission.Select Scan Mode Priority1 Press the Sel button as indicated in the table aboveto designate up to two modes as priorities.2 Press HOME or Scan to end scan list selection.
Send an Emergency Alarm or CallPress the emergency actuator (Emer button,footswitch, hidden pushbutton) to begin an emergencytransmission.For conventional modes, a silent or non-silentemergency alarm data transmission is sent.For trunked modes, emergency call (priority access toa voice channel), silent or non-silent emergencyalarm, or emergency alarm and call is entered.Depending on your radio’s programming, one of theemergency sequences described in the table belowoccur.Alarm TypeIndications/ActionsNon-SilentA tone sounds and the display flashesEMERGNCY. When acknowledged, fourmore tones sound and the displayshows ACK RCVD, then the radioreturns to normal operation.SilentThe audio is muted and no displaychanges take place during the alarm.Press the PTT button, or press andhold the emergency switch to stop theemergency condition and unmute theradio.Call (TrunkedModes only)A tone sounds and the display flashesEMERGNCY.Alarm TypeIndications/ActionsAlarm and CallAfter ACK RCVD (see Non-Silent Alarmabove) is displayed, the radio haspriority voice-channel access.Press the PTT button and talk.After completing the call, press andhold the emergency actuator until atone sounds to return to normaloperation.Send a Status Transmission1 Press Sts. The last acknowledged status or firststatus name is displayed.2 Press the Mode rocker switch to select otherstatuses.3 Press Sel to send the transmission. The displayflashes the selected status name until the dispatcheracknowledges, at which time alert tones sound andACK RCVD is displayed. The radio then returns tonormal operation.Send a Direct-Entry Keyboard StatusTransmissionORIf the called unit does not respond, press Sel or thePTT button again to leave a Call Alert page messageand your ID.A single tone followed by four tones sounds if thecalled unit acknowledges the page.Initiate a Call Alert Page1 Press the Page button.2 Follow the instructions for initiating a PrivateConversation to select a unit ID.3 Press Sel or the PTT button to send a Call Alert pageto the displayed ID,ORTo send a Call Alert page following an EnhancedPrivate Conversation attempt, follow the instructionsfor sending a direct-entry Enhanced PrivateConversation call.Answer a Call Alert PagePress the appropriate Sts # button that you wish tosend. The associated indicator blinks until anacknowledgment is received, then it lights steadily.Press the PTT button and talk.After completing the call, press andhold the emergency actuator until atone sounds to return to normaloperation.2 If the receiving unit answers, press the PTT button toidentify yourself and proceed with your call.Send a Direct-Entry Enhanced PrivateConversation Call1 Press Sel or the PTT button. A single tone soundsand the display changes to PLS WAIT, followed bytelephone-type ringing if the receiving unit is inservice.Four tones sound and PAGE RCV flashes on thedisplay. The tone and display repeat every fiveseconds.1 Press the PTT button,ORInitiate an Enhanced Private Conversation call to thecaller.
Select a Zone/Mode (Optional)1 Press the Zone Up button or Zone Down buttonto scroll to the desired zone.Select a Key Index1 Press and hold the D button until a tone sounds.2 Press the Mode rocker switch to scroll to INDX SEL.DISPLAY AND LIGHT INDICATORSDisplay/LightDisplayed conventional mode hasactivity on it, or selected trunkedsystem is currently busy. Wait forcallback.XMIT light onIndicates you are transmitting.Dir indicator litRadio is in direct (mobile-tomobile) operation.PRI, NPRIindicators litMode displayed is in scan list withthe indicated priority level.P displayedTelephone dialing pause. PressSel to continue the dialing.NO ACK displayedUnit being called with theEnhanced Private Conversation orCall Alert Page feature is not inservice, or emergency alarm orstatus/message transmission isnot acknowledged by dispatcher.NO ANSWRdisplayedUnit being called with EnhancedPrivate Conversation or Call AlertPage does not respond, but isoperational.EMERGNCYdisplayedRadio is in emergency alarm orcall state.NO EMERGdisplayedA mode incapable of emergencytransmission has been selected.OUT RNG displayedRadio is out of range of thetrunking system.2 Press the Mode rocker switch to select the mode.3 Press Sel to enter the Index Selection Menu.Select a Home Zone/Home ModePress the HOME button.4 Press the Mode rocker switch to select the desiredindex.5 Press Sel to select the index.6 Press HOME or the PTT button to quit.Select Secure ModePress and release the D button. The D indicatorlights up.Select an Encryption Key1 Press and hold the D button until a tone sounds.Erase an Encryption Key1 Press and hold the D button until a tone sounds.2 Press the Mode rocker switch to scroll to ERASE KY.3 Press Sel to enter the Key Erase Menu.2 Press the Mode rocker switch to scroll to KEY SEL.4 Press the Mode rocker switch to select the desiredindex.3 Press Sel to enter the Key Selection Menu.5 Press Sel to select the index.4 Press the Mode rocker switch to select the desiredkey.6 Press HOME or the PTT button to quit.5 Press Sel to select the key.6 Press HOME or the PTT button to quit.MeaningBUSY light on
ALERT TONESType of ToneALERT TONES (Continued)ExplanationType of ToneNameExplanation1 Low-PitchedToneInvalid KeyAlertNameFeature buttonpressed is not validin selected mode, ora Call Alert oremergency alarmwas notacknowledged.3 Short HighTones (afterrequesting abusy channel)upon pressingthe PTT button)Automatic CallBack or TalkPermitChannel is availablefor previouslyrequestedtransmission.System is acceptingyour transmission.1 High-PitchedToneCentralAcknowledgeor Valid KeyCentral controllerhas received requestfor Call Alert oremergency alarmtransmission.You pressed a validkey.Low-PitchedTone (uponpressing thePTT buttonduring Transmit)(OperationError)Talk Prohibit/Out-of-Rangeor Time-OutTimer or IllegalMode4 High-PitchedTonesDispatcher orMobile UnitAcknowledgeDispatcher isacknowledging youremergencytransmission. Mobileunit has receivedyour Call Alert.Out of trunked radiosystem range orsystem is out ofservice.Present transmissionwill soon be disabled.You have entered amode where normalsystem traffic will bemissed, or youattempted somethingthat is not allowed.(See examplesbelow.)5 High-PitchedTonesThe above twoacknowledge tones,heard in tandem.2 High-PitchedTonesPrivateConversationYou have anincoming call. PressCall, then the PTTbutton, then talk.4 High-PitchedTones every 6secondsCall Alert PageCall Alert page hasbeen received.Phone-TypeBusy Tone(when pressingthe PTT button)System BusyAll system radiochannels in use.Release the PTTbutton, and wait forcallback.High-PitchedFailsoftTone every 10seconds inunmuted receiveconditionSystem centralcontroller failure. Theradio reverts fromtrunked operation tooperation similar to aconventionalrepeater.Others may sharethe channel.Examples: Not exiting phone mode after a call (radiocannot receive fleet or subfleet calls), transmitting inreceive-only conventional mode, trying to select a dynamicmode when no dynamic ID assignment has been made.
ASTRO Digital Spectra and Digital Spectra PlusW7 Mobile RadioQuick Reference sg7H/L8Mon9DirO#DelXMITDIMBUSYHOMERclPress the PWR button once.Set the Volume and Squelch1 Hold the Vol rocker switch down to increase ordecrease volume as desired, then release.The display shows volume levels from 0 to 15.3 Press Mon again, or replace the microphone on thehang-up clip to return to coded-squelch operation.SITE PAGESELECTTurn the Radio On and Off2 On conventional modes with Private-Line or DigitalPrivate-Line, press Mon or remove the microphonefrom the hang-up clip to defeat the coded squelch.2or2PgeMODEBASIC OPERATION4 To adjust squelch level, hold Mon until a tone sounds.REPROGRAMMESSAGEHORN/LIGHTSDIRECT5 Press the Mode rocker switch to select squelch level.6 Press HOME.Change CTINDICATORRECALLTransmit (Conventional Modes)1 Press Dir (Direct). The Dir indicator lights.2 Press Dir again to return to repeater operation.Activate Scan1 Press Scan to start a scan. If no activity exists, thedisplay shows your selected mode. When a scannedchannel or talkgroup becomes active, the displayshows the active mode name. The PRI and NPRIindicators show priority.2 Press Scan again to stop scanning.Program a Scan List1 Hold Scan until a tone sounds and the scan indicatorblinks.2 Press the Mode rocker switch to select the mode youwant to program.ORDELETEMONITORSTATUSPress the Mode rocker switch to select the desiredmodeMAEPF 23213 AORPress HOME to access the preprogrammed Homemode.Transmit1 Press and hold the microphone PTT button.2 When the transmit light comes on solid and no alerttones sound (or a talk-permit tone or ID sidetonesounds), speak into the microphone in a normal voice.3 State your FCC call sign at the beginning of eachtransmission.Press the Rcl button to scroll through the modescurrently in the scan list.3 Press the Sel button as indicated in the table below toadd or remove the displayed mode from the scan list.4 Repeat the previous steps to continue editing the list.5 Press HOME or Scan to exit.Press SelModeIndicatorOne timeNon-PriorityNPRI litTwo timesSecond PriorityPRI litThree timesFirst PriorityPRI blinksFour timesDelete from ListNo indicator
Select Scan Mode Priority1 Press the Sel button as indicated in the table aboveto designate up to two modes as priorities.Alarm TypeIndications/ActionsCall (TrunkedModes only)A tone sounds and the display flashesEMERGNCY.2 Press HOME or Scan to end scan list selection.Press the PTT button and talk.After completing the call, press andhold the emergency actuator until atone sounds to return to normaloperation.Send an Emergency Alarm or CallPress the emergency actuator (Emer button,footswitch, hidden pushbutton) to begin an emergencytransmission.For conventional modes, a silent or non-silentemergency alarm data transmission is sent.Alarm and CallAfter ACK RCVD (see Non-Silent Alarmabove) is displayed, the radio haspriority voice-channel access.Press the PTT button and talk.For trunked modes, emergency call (priority access toa voice channel), silent or non-silent emergencyalarm, or emergency alarm and call is entered.Depending on your radio’s programming, one of theemergency sequences described in the table belowoccur.Alarm TypeIndications/ActionsNon-SilentA tone sounds and the display flashesEMERGNCY. When acknowledged, fourmore tones sound and the displayshows ACK RCVD, then the radioreturns to normal operation.SilentThe audio is muted and no displaychanges take place during the alarm.Press the PTT button, or press andhold the emergency switch to stop theemergency condition and unmute theradio.After completing the call, press andhold the emergency actuator until atone sounds to return to normaloperation.Send a Status Transmission1 Press Sts. The last acknowledged status or firststatus name is displayed.2 Press the Mode rocker switch to select otherstatuses.3 Press Sel to send the transmission. The displayflashes the selected status name until the dispatcheracknowledges, at which time alert tones sound andACK RCVD is displayed. The radio then returns tonormal operation.Send a Direct-Entry Keyboard StatusTransmissionPress the appropriate Sts # button that you wish tosend. The associated indicator blinks until anacknowledgment is received, then it lights steadily.Send a Direct-Entry Enhanced PrivateConversation Call1 Press Sel or the PTT button. A single tone soundsand the display changes to PLS WAIT, followed bytelephone-type ringing if the receiving unit is inservice.2 If the receiving unit answers, press the PTT button toidentify yourself and proceed with your call.ORIf the called unit does not respond, press Sel or thePTT button again to leave a Call Alert page messageand your ID.A single tone followed by four tones sounds if thecalled unit acknowledges the page.Initiate a Call Alert Page1 Press the Page button.2 Follow the instructions for initiating a PrivateConversation to select a unit ID.3 Press Sel or the PTT button to send a Call Alert pageto the displayed ID,ORTo send a Call Alert page following an EnhancedPrivate Conversation attempt, follow the instructionsfor sending a direct-entry Enhanced PrivateConversation call.
Answer a Call Alert PageFour tones sound and PAGE RCV flashes on thedisplay. The tone and display repeat every fiveseconds.1 Press the PTT button,ORView the Current SitePress Ste momentarily. If the radio is scanning for anew site, SCANNING is displayed.Initiate a Site ScanPress and hold Ste until a tone sounds and SCANNINGis displayed.Initiate an Enhanced Private Conversation call to thecaller.1 Press the Zone Up button or Zone Down buttonto scroll to the desired zone.2 Press the Mode rocker switch to select the mode.Select a Home Zone/Home ModePress the HOME button.Request Dynamic RegroupingPress Rpg. A central acknowledgement tone soundsand RPGM RQST is displayed while the request isbeing processed.When the dispatcher acknowledges, four additionaltones sound, ACK RCVD is displayed, and your radioreturns to normal operation.Automatic Multiple Site Selection (AMSS)6 Press HOME or the PTT button to quit.Select a Key Index1 Press and hold the D button until a tone sounds.2 Press the Mode rocker switch to scroll to INDX SEL.3 Press Sel to enter the Index Selection Menu.Lock on a SiteSelect a Zone/Mode (Optional)5 Press Sel to select the key.1 Press Lck to lock the radio onto the current site.2 To view its condition (locked or unlocked), press Lckmomentarily. LOCKED or UNLOCKED is displayed.4 Press the Mode rocker switch to select the desiredindex.5 Press Sel to select the index.6 Press HOME or the PTT button to quit.ORTo toggle to the opposite condition, press and holdLck until a beep sounds and the display changes tothe other condition.The radio then returns to normal operation.Erase an Encryption Key1 Press and hold the D button until a tone sounds.2 Press the Mode rocker switch to scroll to ERASE KY.Select Secure ModePress and release the D button. The D indicatorlights up.3 Press Sel to enter the Key Erase Menu.4 Press the Mode rocker switch to select the desiredindex.5 Press Sel to select the index.Select an Encryption Key1 Press and hold the D button until a tone sounds.2 Press the Mode rocker switch to scroll to KEY SEL.3 Press Sel to enter the Key Selection Menu.4 Press the Mode rocker switch to select the desiredkey.6 Press HOME or the PTT button to quit.
DISPLAY AND LIGHT INDICATORSDisplay/LightMeaningBUSY light onDisplayed conventional mode hasactivity on it, or selected trunkedsystem is currently busy. Wait forcallback.XMIT light onIndicates you are transmitting.Dir indicator litRadio is in direct (mobile-tomobile) operation.PRI, NPRIindicators litMode displayed is in scan list withthe indicated priority level.P displayedTelephone dialing pause. PressSel to continue the dialing.NO ACK displayedUnit being called with theEnhanced Private Conversation orCall Alert Page feature is not inservice, or emergency alarm orstatus/message transmission isnot acknowledged by dispatcher.NO ANSWRdisplayedUnit being called with EnhancedPrivate Conversation or Call AlertPage does not respond, but isoperational.EMERGNCYdisplayedRadio is in emergency alarm orcall state.NO EMERGdisplayedA mode incapable of emergencytransmission has been selected.OUT RNG displayedRadio is out of range of thetrunking system.ALERT TONESType of ToneALERT TONES (Continued)ExplanationType of ToneNameExplanation1 Low-PitchedToneInvalid KeyAlertNameFeature buttonpressed is not validin selected mode, ora Call Alert oremergency alarmwas notacknowledged.Low-PitchedTone (uponpressing thePTT buttonduring Transmit)(OperationError)Talk Prohibit/Out-of-Range,or Time-OutTimer, or IllegalMode1 High-PitchedToneCentralAcknowledgeor Valid KeyCentral controllerhas received requestfor Call Alert oremergency alarmtransmission.You pressed a validkey.Out of trunked radiosystem range orsystem is out ofservice.Present transmissionwill soon be disabled.You have entered amode where normalsystem traffic will bemissed, or youattempted somethingthat is not allowed.(See examplesbelow.)4 High-PitchedTonesDispatcher orMobile UnitAcknowledgeDispatcher isacknowledging youremergencytransmission. Mobileunit has receivedyour Call Alert.5 High-PitchedTonesThe above twoacknowledge tones,heard in tandem.2 High-PitchedTonesPrivateConversationYou have anincoming call. PressCall, then the PTTbutton, then talk.4 High-PitchedTones every 6secondsCall Alert PageCall Alert page hasbeen received.3 Short HighTones (afterrequesting abusy channel)(upon pressingthe PTT button)Automatic CallBack or TalkPermitChannel is availablefor previouslyrequestedtransmission.System is acceptingyour transmission.High-PitchedFailsoftTone every 10seconds inunmuted receiveconditionSystem centralcontroller failure. Theradio reverts fromtrunked operation tooperation similar to aconventionalrepeater.Others may sharethe channel.Examples: Not exiting phone mode after a call (radiocannot receive fleet or subfleet calls), transmitting inreceive-only conventional mode, trying to select a dynamicmode when no dynamic ID assignment has been made.
ASTRO Digital Spectra and Digital Spectra PlusW9 Mobile RadioBASIC OPERATIONQuick Reference CardSet the Volume and SquelchTurn the Radio On and OffSlide the power switch on the bottom of the controlunit to the left.1 Hold the Vol rocker switch down to increase ordecrease volume as desired, then release.The display shows volume levels from 0 to 15.2 On conventional modes with Private-Line or DigitalPrivate-Line, press Sql or remove the microphonefrom the hang-up clip to defeat the coded squelch.PRIORITYINDICATORSCANCALLPHONE3 Press Sql again to return to coded-squelch operation.XMI
ASTRO Digital Spectra and Digital Spectra Plus W5 Mobile Radio Quick Reference Card BASIC OPERATION Turn the Radio On and Off Set the Volume and Squelch Change Modes Transmit Transmit (Conventional Modes) Activate Scan Program a Scan List Select Scan Mode Priority Mode Vol Mic Phon Call Sel H/L Mon Dir PWR Scan XMIT DIM BUSY HOME MODE POWER .
Digital Spectra and ASTRO Digital Spectra Plus mobile radios (mode ls W3, W4, W5, W7, and W9) to the component level. For the most part, the information in this manual pertains to both ASTRO Digital Spectra and ASTRO Digital Spectra Plus radios. Exceptions are clearly noted where they occur.
To find corresponding HD/SD channels, look at the number of the high definition channel and just add 20. ( 40 for Chinese channels). Some examples as below: Astro RIA HD will now be on Channel 104 while Astro RIA will now be on Channel 124 (104 20 from Astro RIA HD). Astro Hua Hee Dai HD will now be on Channel 333 while Astro Hua Hee
Astro Arena (HD) Astro Awani Premium Channels Astro Supersport 1 Astro Supersport 2 Astro Supersport 3 Astro Supersport 4 BeIN Sports BeIN Sports MAX Fox Sports 1 . Peak TV rating. AND MANY MANY MORE HIGH RATED CONTENT!! Malay Chinese Indian Korean *Images used are for illustration purposes only. ADVERTISING
The ASTRO Digital Interface Unit 3000 (DIU) enables remote control of a digital ASTRO base station using existing analog desktop controllers, consoles, and other analog non-ASTRO remote control devices. In addition, the DIU adds the ASTRO digital encryption ca
Upgrading an ASTRO Digital Saber or ASTRO Digital Spectra for ACPO Project-25 compliancy was as simple as ordering the update from Motorola Inc. and refreshing the radio's host and DSP firmware builds, and reconfiguring the codeplug to enable Q806/G806. New Radio Service Software (RSS) was also required.
NIST 14 Electron ionization mass spectral library -276,259 spectra of 242,477 unique compounds MS/MS library: 234,284 spectra -51,216 ion trap spectra for 42,126 different ions of 8,171 compounds -183,068 collision cell spectra (QTOF and tandem quad) spectra for 14,835 different ions of 7,692 compounds 38
ASTRO Digital APX 7500 Radio Models are capable of operating in four different voice communication modes: Normal Analog (clear voice) 3.6KB ASTRO Digital (both clear and coded voice) 9.6 KB ASTRO 25 Digital and coded voice). (both Clear and Coded voice) 9.6KB 12.5kHz 2 slot digital TDMA (both clear Will be capable of APCO25 Phase 2
2.1.6 Adding NDK Hooks Using ACD Support . It is not intended as an API reference. How to Use This Manual The information presented in this document is divided into the following chapters: Chapter 1: Overview introduces the stack and developing network applications. Chapter 2: Network Application Development describes the NDK software, and how to start developing network applications .
