Fire Detection Systems Fmz 5000

FIRE DETECTION SYSTEMSFMZ 5000FMZ 5000Fire detection and extinguishingcontrol panel

Fire alarm panelslike safety belts inSeat belts have been compulsory for the past 30 yearsand led to many innovations, such as the airbag andsidebag.At first, the seat belt was a relatively uncomfortablesafety device. But the development of heightadjustable belts with automatic tighteners resulted ina very flexible and effective restraint system featuringhigh comfort and safety. What began as an obligationwas refined and widely accepted. Ensuring health,future compliance and comfort comes first. The samedevelopment from simple to complex also appliesto fire detection and alarm systems from Minimax.Minimax has been designing and buildThe centre of the FMZ 5000 fire detection and extinguishing controlpanel is based on the redundant structure of all important components in order to ensure maximum levels of safety and reliability.Of course, the FMZ 5000 has been approved by VdS in accordance

FIRE DETECTION SYSTEMSFMZ 5000are mandatory for many construction projectsyour car – both protect life and existence.ing fire alarm panels for over 30 years.with EN 54-2, EN 54-4 and EN 12094-1 for all fire protection tasks,including the operation of spark extinguishing systems. TheFMZ 5000 can easily be adapted to a variety of project requirements.Of course, this process is not yet fully automatic – but it is veryfast and easy. Never before have complex structures been able tobe so rapidly created or changed simply through configuration andwith only a handful of function modules.

OneMODU L ARKI Tfor all your needs Hardware structure of the fire alarm panelTwo standard basic structures are on offer, the small mod 4and the mid-sized mod 12. In addition to this, versions in19" free-standing cabinets in 21 U, 31 U and 40 U areavailable as mod XL basic structures. Only the outer shellsize is permanent, while the interior workings remain fullyflexible. The basic hardware is strikingly well designed,with high functionality. The housing of the mod 4 is alsosuitable for installation in a console or wall mounting.FMZ 5000 – one model for all tasksIdentical function modules used for all versions to implement a wide variety of projects. Before the fire alarm panelcan process the special tasks of a particular project, it isconfigured via the computer with the necessary information for the project. All fire alarm panels, small andlarge, consist of the same modules. Maintenance andservice is also extremely cost-effective for the operator.More is less. All function modules are powerful and highlyflexible. As a result of this, single fire detection or combined fire detecting and extinguishing control panels canbe created, in addition to spark detector control panelsand controls for practically immediate fire detection andextinguishing, for devices such as machine tools or paintbooths.The user purchases only what he needs since expansion toany size is possible at any time without additional wiring.Space should be reserved, however, for modules to beadded at a later time. This saves both money and space.The FMZ 5000 mod 12 features high flexibility for totalfreedom of expansion in a 19" housing.In the event of changes in processes or use, or in caseretrofitting becomes necessary, the new function can beadapted directly on-site without long operationaldowntimes.S N A P

FIRE DETECTION SYSTEMSFMZ 5000The FMZ 5000 fire alarm panelFunctions왘 All Minimax conventional detectors can be operated onthe conventional detection lines which activate an alarmthrough an increase of line current. These include smokeand heat detect-ors for normal conditions and all industrialfire detectors. Including the unbeatably robust and flexibleUniVario industrial detector. Fire detectors are availablefor the detection of heat, smoke, flames, sparks andCO fire gases, in addition to manual call points designs forvarious uses.왘 Due to the configurable line voltage of 9 V to 20 V, detectorsfrom other manufacturers can also be used.왘 Up to 126 addressable points can be connected andoperated on the detector loops: fire detectors for smoke,heat and flames, in addition to manual call points andUniVario industrial detectors. But they can also be inputor output modules for monitoring, in addition to being anacoustic and optical signaller.왘 Any number of stop lines can be set up in each detectorloop. This enables detectors in ex-areas with the protectionclass EEx i, for instance, to be operated.왘 Every detector loop can be up to 2000 m long and can beinstalled with standard fire detection cable J-Y(ST)Y 0.8.왘 Loop couplers enable connection to all conventionaldetectors, including industrial alarms.왘 Input modules on the loop can be used for monitoring;e.g. extinguishing systems.왘 Output modules on the loop can be used for controls andactivations (including monitoring the supply line to theconnected device).왘 Directly from the control panel, monitored controls forextinguishing control, e.g., can be activated.왘 Two monitored outputs for the control of transmissionequipment for calling the fire brigade and faults forinforming the service department are provided.왘 Non-monitored controls and fault reports can beimplemented by means of relay modules.왘 Up to 32 fire alarm panels and control units can benetworked in a ring. This enables all reports to also bedisplayed on central control panels. All control points canalso be managed from various positions or control centres.왘 Standardised interfaces and data protocols such as OPCand MODBus are available for transmission to controlcentres and external operation.왘 Acoustic signaller on the loop are either independent unitsor they are located in the base of a detector; they aresupplied by the loop and need no separate power supply.왘 All acoustic signallers on a loop can be addressed and canbe controlled individually or synchronised as a group fora uniform alarm tone.A N DG O !

SIMPLYConfigurationAll reports from detectors, monitoring devices or viacontrols, etc. can be freely defined: what should bereported, the message text, group number, and corresponding single/collective LEDs. All logical and timedependent links between the messages and the relatedactions can as well as be freely defined. For functionssuch as blocking, revision and shutdown, can generally be configuredwith the membrane key on the frontpanel in switch or button function.No matter what the requirements of a project,the FMZ 5000 can provide the solution. This ismade possible by the high modularity of thehardware and the flexibility of the softwarePLC, together with the graphic configuration.The clear structure of the new technologyfacilitates planning and set-up of the projectconfiguration. Instead of having to choosefrom many options, specific project tasks canbe solved with only one firealarm panel and the combinationof selected modules.SNAP AND GO! All you haveto do is plug in the functionmodules, with no wiring in thealarm panel,then connectthe externaldevices!Customer advantages왘 Easy, menu-controlled user interface with soft keys.Maximum information at a glance – due to the large, clearlayout of the full-graphic display.왘 Low training requirements due to ease of operation.왘 If rooms or buildings are reallocated for new uses, the firealarm panel can easily be adapted without rewiring, dueto the flexibility of the function modules. Many of thechanges can be implemented by adapting the configuration.왘 The same applies to extensions in the customer’s building.The fire alarm panel can largely be adapted to the growingrequirements by means of SNAP AND GO technology.왘 Since industrial detectors can also be connected todetector loops via loop couplers, all industrial requirements can be fulfilled.왘 The FMZ 5000 is a combined fire detection and extinguishing control panel, meaning all fire alarm andextinguishing tasks can be controlled from a single firealarm panel.왘 All tasks and all requirements can be implemented.FutureThe fire alarm panels and function modules from FMZ 5000mod 4, mod 12 and mod XL are designed as future-orientedplatforms and can be adapted to new developments andchanges in regulations, in addition to expanded functions.INGENIOUSMinimaxis a full service provider forextinguishing technologyand fire detection technologyfrom one source.

FIRE DETECTION SYSTEMSFMZ 5000TECHNICAL DATASHEETS MISSING?PLEASE CALLPhone: 49 4531 803-0Fax: 49 4531 803-248

ADVANTAGESof our flexible FMZ 5000왘 Modular principle왘 One panel for all eventualities왘 Few different types of modules왘 Easy to operate왘 Low replacement part requirement왘 Can easily be expanded왘 Redundant safety technology왘 Fire detection and extinguishingcontrol panel in one unitmod 4mod 12mod XL 21 HE / 31 HE / 40 HEInput voltage115 V AC /230 V AC 10 %–15 %, 50/60 HZ115 V AC /230 V AC 10 %–15 %, 50/60 HZ115 V AC /230 V AC 10 %–15 %, 50 /60 HZOperating voltage24 Vdc24 Vdc24 VdcPower packs24 V 1,5 A, 2,7 A24 V 2,7 A , 5 A, 15 A24 V 2,7 A , 5 A, 15 AEmergency power supply2 x 12 V, 12 Ah internal,up to 24 Ah external2 x 12 V, 24 Ah internal,up to 110 Ah external2 x 12 V, to 110 Ah internalProtection classIP 54IP 54IP 54 / IP 55Approved ambient temperature–5 C to 40 C–5 C to 40 C–5 C to 40 CApproved relative humidity 95 %, without dew 95 %, without dew 95 %, without dewMax. number of modules*844127Group /area displays16 LED pairs red/yellow192 LED pairs red/yellow432 LED pairs red/yellowSerial portsRS432, RS422, RS485RS432, RS422, RS485RS432, RS422, RS485Total weightca. 18 kgca. 26 kgca. 70 kg / 160 kg / 190 kgDimensions475 x 340 x 200 mm600 x 604 x 225 mm21 HE 600 x 1012 x 373 mm31 HE 800 x 1600 x 600 mm40 HE 800 x 2000 x 600 mmVdS approvalsG204124, G205019 (EST), also in each case as spark detection control panelVdSMinimax GmbH & Co. KGIndustriestrasse 10 /1223840 Bad OldesloeGermany 4365 Federal DrivePhone 49 Greensboro,4531 803-0 NC 27410Fax 49 Phone4531 803-248(336) 299-2933E-mail info@minimax.deFax(336) 299-2944www.minimax.dewww.flamexinc.comNo. S 89201* Depending on the type of module used.VdSCertified according toISOs9001ÜP50Fe 02/07.04/2/05.09/HASystem-specific dataPrinted in GermnayTechnical data for the FMZ 5000

The FMZ 5000 is a combined fire detection and extin-guishing control panel, meaning all fire alarm and extinguishing tasks can be controlled from a single fire alarm panel. All tasks and all requirements can be implemented. Future The fire alarm panels and function modules from FMZ 5000 mod 4, mod 12 and mod XL are designed as future-oriented