J-Link / J-Trace User Guide
J-Link / J-TraceUser GuideDocument: UM08001Software Version: 6.44Revision: 2Date: April 25, 2019A product of SEGGER Microcontroller GmbHwww.segger.com
2DisclaimerSpecifications written in this document are believed to be accurate, but are not guaranteed tobe entirely free of error. The information in this manual is subject to change for functional orperformance improvements without notice. Please make sure your manual is the latest edition.While the information herein is assumed to be accurate, SEGGER Microcontroller GmbH (SEGGER) assumes no responsibility for any errors or omissions. SEGGER makes and you receive nowarranties or conditions, express, implied, statutory or in any communication with you. SEGGERspecifically disclaims any implied warranty of merchantability or fitness for a particular purpose.Copyright noticeYou may not extract portions of this manual or modify the PDF file in any way without the priorwritten permission of SEGGER. The software described in this document is furnished under alicense and may only be used or copied in accordance with the terms of such a license. 2004-2019 SEGGER Microcontroller GmbH, Monheim am Rhein / GermanyTrademarksNames mentioned in this manual may be trademarks of their respective companies.Brand and product names are trademarks or registered trademarks of their respective holders.Contact addressSEGGER Microcontroller GmbHEcolab-Allee 5D-40789 Monheim am RheinGermanyTel.Fax.E-mail:Internet: 49-2173-99312-0 Link / J-Trace (UM08001) 2004-2019 SEGGER Microcontroller GmbH
3Manual versionsThis manual describes the current software version. If you find an error in the manual or aproblem in the software, please report it to us and we will try to assist you as soon as possible.Contact us for further information on topics or functions that are not yet documented.Print date: April 25, 424AGChapter “Target interfaces and adapters”* Section “20-pin J-Link connector”: Corrected information for pins 14, 16,18, 20.6.443190415LGChapter “J-Link software and documentation pacakge”* Updated J-Mem screenshot.Added Chapter “J-Mem”6.442190408NVChapter “Target interfaces and adapters”* Added diagram showing J-Trace PRO connection with target device.6.441190321ELChapter “J-Link software and documentation package”* Section “J-Link GDB Server”: Command line options corrected.6.440190306NVChapter “J-Link software and documentation package”* Section “J-Link Commander”: Added memory zone example for command “mem”.6.420190215NVChapter “Working with J-Link and J-Trace”* Section “J-Link Script Files”: Added new Scripting functions for ETB initialization.Chapter “Working with J-Link and J-Trace”* Section “J-Link Command Strings”: Expanded “map region” documentation.6.401181217SIChapter “J-Link software and documentation package”* Section “ J-Link SWO Viewer: Added description of command line option”-usb“”.6.400181120AGChapter “ARM SWD specifics” addedChapter “ARM SWD specifics”* Section “SWD multi-drop” added6.3410181025NVChapter “J-Link software and documentation package”* Section “J-Link SWO Viewer”: Updated description and pictures.6.349181023NVChapter “Working with J-Link and J-Trace”* Section “J-Link Command Strings”: Added new J-Link command 18AGChapter “Target interfaces and adapters”* Section “19-pin JTAG/SWD and Trace connector”: Added informationabout pitch of connector.6.347180906SIChapter “J-Link Commander”* Section “ Commands: Added description of ”VTREF“.6.346180905NVChapter ”Working with J-Link and J-Trace“* Section ”J-Link Script files“: Added new Script file functions to replacegeneric trace module initializations.6.345180816LGChapter ”J-Link GDB Server“* Section ”Supported remote (monitor) commands“: Added new monitorcommand ”flash erase“.6.344180704AGChapter ”J-Link software and documentation package“* Section ”J-Flash Lite“ added.6.343180524LGChapter ”J-Link software and documentation package“* Section ”J-Link Commander (Command line tool)“: Added new commandline option ”-Log“.6.342180517LGChapter ”Open Flashloader“* Section ”XML Tags and Attributes“: Added new ChipInfo attribute”Aliases“.6.341180516NVChapter ”J-Link software and documentation package“* Section ”J-Link SWO Viewer“: Refined CL option descriptions.6.340180511AGChapter ”Working with J-Link and J-Trace“* Section ”J-Link Command Strings“: Added new J-Link command string”SetEnableMemCache“.J-Link / J-Trace (UM08001) 2004-2019 SEGGER Microcontroller GmbH
4ManualRevisionversionDateByDescriptionChapter ”Environmental Conditions & Safety“ added6.324180417NVChapter ”J-Flash SPI“* Section ”Command Line Interface“: Updated description of CL option jflashlog.* Section ”Command Line Interface“: Updated description of CL option jlinklog.6.323180409NVChapter ”Working with J-Link and J-Trace“* Section ”Script file API functions“: Added new API functions”JLINK MEM Preserve()“, ”JLINK MEM Restore()“, ”JLINK MEM Fill()“.6.322180327LGChapter ”Working with J-Link and J-Trace“* Section ”J-Link Command Strings“: Added new J-Link command string”MemPreserveOnReset“.6.321180327AGMoved contents of chapter ”Segger-specific GDB protocol extensions“ toseparate manual (UM08036)6.320180323AGMoved J-Link GDB Server to separate chapterAdded Segger specific GDB protocol extension qSeggerSTRACE:capsAdded Segger specific GDB protocol extension qSeggerSTRACE:GetInstStats6.302180314AGChapter ”Working with J-Link and J-Trace“* Section ”J-Link Command Strings“: Added new J-Link command string”SetAllowStopMode“.NVChapter ”Working with J-Link and J-Trace“* Section ”J-Link Script Files“:Added new function SWO EnableTarget();.* Section ”J-Link Script Files“:Renamed function GetSWOBaseClock() to SWO GetSWOBaseClock();Added unit information of clock speed value.6.3011803096.300180206ELChapter ”Working with J-Link and J-Trace“* Section ”J-Link Script Files“:Added new function: HandleBeforeFlashProg();* Section ”J-Link Script Files“:Added new function HandleAfterFlashProg();6.241180124ELChapter ”Working with J-Link and J-Trace“* Section ”J-Link Comamnd Strings“: Updated.6.240180111LGChapter ”J-Link software and documentation package“* Section ”J-Link GDB Server“: Added new GDBServer monitor commands:ReadAP, ReadDP, WriteAP and WriteDP.NVChapter ”Working with J-Link and J-Trace“* Section ”J-Link Command Strings“: Added new J-Link Command Stringto set base addresses of coresight components for tracinge.g. CORESIGHT SetETBBaseAddr.* Section ”J-Link script files“: Added new function GetSWOBaseClock();.Chapter ”J-Link software and documentation package“* Section ”J-Link SWO Viewer“: Updated picture of new SWO Viewer GUIinterface with additional explanation of SWO clock setting.6.2201712146.208171123AGChapter ”Related Software“* Section ”JTAGLoad“: PIO commands was listed as supported even thoughit is not. Fixed.* Section ”JTAGLoad“: PIOMAP commands was listed as supported eventhough it is not. Fixed.6.207171025ELChapter ”Monitor Mode Debugging“* Section ”Enable Monitor Debugging“: Updated6.206171013ELChapter ”Working with J-Link and J-Trace“* Section ”J-Link script files“: UpdatedChapter ”Working with J-Link and J-Trace“* Section ”J-Link Command Strings“: UpdatedNGUpdated links to SEGGER wiki:Low power mode debuggingJ-Link script filesJ-Link Command StringsNGChapter ”Working with J-Link and J-Trace“* Section ”Script file API functions“: Added the following functions:JLINK C2 WriteData()JLINK C2 ReadData()6.206.2054J-Link / J-Trace (UM08001)171011171011 2004-2019 SEGGER Microcontroller GmbH
5ManualRevisionversionDateByDescriptionJLINK C2 WriteAddr()JLINK C2 ReadAddr()JLINK CORESIGHT ReadDAP()JLINK GetPinState()JLINK GetTime()JLINK JTAG ReadWriteBits()JLINK JTAG StartDR()JLINK PIN Override()JLINK SelectTIF()JLINK SetDevice()JLINK SWD ReadWriteBits()JLINK TARGET IsHalted()JLINK TARGET Halt()JLINK TIF ActivateTargetReset()JLINK TIF ReleaseTargetReset()JLINK TIF SetSpeed()JLINK TIF SetClrTCK()JLINK TIF SetClrTMS()JLINK TIF SetClrTDI()6.203171006NGChapter ”Working with J-Link and J-Trace“* Section ”Script file API functions“: Added return values for various functions6.202171005ELChapter ”Open Flashloader“* Section ”Add. Info / Considerations / Limitations“: Updated6.201170922NGChapter ”Working with J-Link and J-Trace“* Section ”J-Link Command Strings“: UpdatedAdded new command string er ”Open Flashloader“Added ”AlwaysPresent“ as new attribute to the FlashBankInfo 6.146170407NVChapter ”Working with J-Link and J-Trace“* Section ”J-Link scriptfiles“: Updated”JLINK ExecCommand()“ description6.145170320ELChapter ”J-Flash SPI“Updated screenshots6.144170317NVChapter ”Working with J-Link and J-Trace“* Section ”J-Link scriptfiles“:Added: ”JLINK ExecCommand()“Section ”Keil MDK-ARM“ added for Command string executionNVChapter ”Working with J-Link and J-Trace“* Section ”J-Link scriptfiles“:Added: ”OnTraceStart()“ and ”JLINK TRACE Portwidth“Chapter ”Trace“* Added crossreference to ”JLINK TRACE Portwidth“NVChapter ”Introduction“*Added Subsubsection ”Software and HardwareFeatures Overview“ to all device Subsections.*Edited Subsection ”“J-Trace ARM.*Section ”Target interfaces and adapters“:edited ”RESET“ to ”nRESET“ and updated description.NVChapter ”Working with J-Link and J-Trace“* Section ”Exec Commands“: UpdatedSetResetPulseLenTraceSampleAdjustChapter ”Trace“* Section ”Tracing via trace pins“: 1AGChapter ”Working with J-Link“* Section ”Exec Commands“: oTraceCacheChapter ”Trace“ added.6.10a0160820ELChapter ”Working With J-Link“* Section ”Exec Commands“: Updated ExcludeFlashCacheRanges.6.00i0160802ELChapter ”Introduction“* Removed ”Model Feature Lists“Chapter ”Adding Support for New Devices“:J-Link / J-Trace (UM08001) 2004-2019 SEGGER Microcontroller GmbH
6ManualRevisionversionDateByDescriptionrenamed to ”Open Flash Loader“Chapter ”Open Flash Loader“ updated.6.001160617ELChapter ”J-Flash SPI“* Added chapter ”Custom Command Sequences“6.000160519AGChapter ”Adding Support for New Devices“ added.5.12f0160503ABChapter ”Related Software“* Section ”J-Link RTT Viewer“ updated and moved from section ”RTT“.5.12d1160427AGChapter ”Working with J-Link and J-Trace“* Section ”J-Link script files“ updated.5.12d0160425AGChapter ”Working with J-Link and J-Trace“* Section ”J-Link script files“ updated.5.12c0160413NGChapter ”Related Software“* Section ”J-Link Commander“Typo fixed.5.12c1160418NGChapter ”Related Software“* Section ”J-Link Commander“Commands and commandline options added.Chapter ”Working with J-Link and J-Trace“* Section ”J-Link Command Strings“Command ”SetRTTTelnetPort“ added.Chapter ”Flash Download“* Section ”Debugging applications that change flash contents at runtime“added.5.10u0160317AGChapter ”Monitor Mode Debugging“* Section ”Target application performs reset“ added.5.10t0160314AGChapter ”Monitor Mode Debugging“* Section ”Enable Monitor Debugging“ updated.* Section ”Forwarding of Monitor Interrupts“ added.5.103160309ELChapter ”J-Flash SPI“ updated.5.102160215AGChapter ”RTT“ updated.5.101151204AGChapter ”RDI“ updated.Chapter ”Semihosting“ added.5.100151127NGChapter ”Related Software“* Section ”J-Scope“ removed.5.02m0151125AGChapter ”Working with J-Link and J-Trace“* Section ”The J-Link settings file“ added.Chapter ”Low Power Debugging“ added.5.02l0151123AGVarious Chapters* Some typos corrected.5.02i1151106RHChapter ”J-Flash SPI“* Section ”Send custom commands“ added.5.02i0151105RHChapter ”Related Software“* Section ”J-Link Commander“exec command added.Chapter ”Working with J-Link and J-Trace“* Section ”J-Link Command Strings“New commands added.5.02f1151022NGChapter ”Related Software“* Section ”J-Scope“ updated.5.02f1151022ELChapter ”Target interfaces and adapters“* Section ”Reference voltage (VTref)“ added.5.02f0151007RHChapter ”Working with J-Link and J-Trace“* Section ”J-Link script files“ updated.5.02e0151001AGChapter ”Working with J-Link and J-Trace“* Section ”J-Link script files“ updated5.02c1150925NGChapter ”Licensing“* Section ”Original SEGGER products“ updated.Chapter ”Flash download“* Section ”Setup for various debuggers (CFI flash)“ updated.5.02c0150916RHChapter ”Flash download“J-Link / J-Trace (UM08001) 2004-2019 SEGGER Microcontroller GmbH
7ManualRevisionversionDateByDescription* Section ”Setup for various debuggers (SPIFI flash)“ added.5.02c0150914RHChapter ”Introduction“* Section ”J-Link / J-Trace models“ updated.* Section ”Supported OS“Added Windows 105.02a0150903AGChapter ”Monitor Mode Debugging“ added.5.020150820AGChapter ”Working with J-Link and J-Trace“* Section ”J-Link Command Strings“”DisableCortexMXPSRAutoCorrectTBit“ added.5.020150813AGChapter ”Monitor Mode Debugging“ added.5.001150728NGChapter ”Related Software“* Section ”J-Link Commander“Sub-Section ”Command line options“ updated.5.000150609AGChapter ”Flash download“* Section ”QSPI flash support“ added.Chapter ”Flash breakpoints“* Section ”Flash Breakpoints in QSPI flash“ added5.000150520ELChapter ”J-Flash SPI“* Initial version added4.99b0150520ELChapter ”Related Software“* Section ”J-Link STM32 Unlock“Added command line options4.99a0150429AGChapter ”Target interfaces and Adapters“Chapter ”20-pin J-Link connector“, section ”Pinout for SPI“ added.4.98d0150427ELChapter ”Related Software“* Section ”Configure SWO output after device reset“ updated.4.98b0150410AGChapter ”Licensing“* Section ”J-Trace for Cortex-M“ updated.4.980150320NGChapter ”Related Software“* Section ”J-Link Commander“Sub-Section ”Commands“ added.Chapter ”Working with J-Link and J-Trace“* Section ”J-Link script files“ updated4.96f0150204JLChapter ”Related Software“* Section ”GDB Server“Exit code description added.4.960141219JLChapter ”RTT“ added.Chapter ”Related Software“* Section ”GDB Server“Command line option ”-strict“ added.Command line option ”-timeout“ added.4.90d0141112NGChapter ”Related Software“* Section ”J-Link Remote Server“ updated.* Section ”J-Scope“ updated.4.90c0140924JLChapter ”Related Software“* Section ”JTAGLoad“ updated.4.90b1140813ELChapter ”Working with J-Link and J-Trace“* Section ”Connecting multiple J-Links / J-Traces to your PC“ updatedChapter ”J-Link software“* Section ”J-Link Configurator“ updated.4.90b0140813NGChapter ”Related Software“* Section ”J-Scope“ added.4.862140606AGChapter ”Device specifics“* Section ”Silicon Labs - EFM32 series devices“ added4.861140527JLChapter ”Related Software“* Section ”GDB Server“Command line options -halt / -nohalt added.Description for GDB Server CL version added.4.860140519AGChapter ”Flash download“Section ”Mentor Sourcery CodeBench“ added.4.840140321ELChapter ”Working with J-Link“J-Link / J-Trace (UM08001) 2004-2019 SEGGER Microcontroller GmbH
8ManualRevisionversionDateByDescription* Section ”Virtual COM Port (VCOM) improved.Chapter “Target interfaces and adapters”* Section “Pinout for SWD Virtual COM Port (VCOM) added.”4.821140228ELChapter “Related Software”* Section “Command line options”Extended command line option -speed.Chapter “J-Link software and documentation package”* Section “J-Link STR91x Commander”Added command line option parameter to specify a customizedscan-chain.Chapter “Working with J-Link”* Section “Virtual COM Port (VCOM) added.Chapter ”Setup“* Section ”Getting started with J-Link and DS-5“4.820140218JLChapter ”Related Software“* Section ”GDB Server“Command line option -notimeout added.4.80f0140204JLChapter ”Related Software“* Section ”GDB Server“Command line options and remote commands added.4.801131219JL/NG4.800131105JLChapter ”Related Software“* Section ”GDB Server“SEGGER-specific GDB protocol extensions added.4.763130823JLChapter ”Flash Download“* Replaced references to GDB Server manual.Chapter ”Working with J-Link“* Replaced references to GDB Server manual.4.762130821JLChapter ”Related Software“* Section ”GDB Server“Remote commands added.4.761130819JLChapter ”Related Software“* Section ”SWO Viewer“Sample code updated.Chapter ”Related Software“* Section ”GDB Server“Remote commands and command line options description improved.Several corrections.4.760130809JLChapter ”Related Software“* Sections reordered and updated.Chapter ”Setup“* Section ”Using JLinkARM.dll moved here.4.71b0130507JLChapter “Related Software”* Section “SWO Viewer”Added new command line options.4.660130221JLChapter “Introduction”* Section “Supported OS”Added Linux and Mac OSX4.62b0130219ELChapter “Introduction”* Section “J-Link / J-Trace models”Clock rise and fall times updated.4.620130129JLChapter “Introduction”* Section “J-Link / J-Trace models”Sub-section “J-link ULTRA” updated.4.620130124ELChapter “Target interfaces and adapters”* Section “9-pin JTAG/SWD connector”Pinout description corrected.4.581121206AGChapter “Introduction”* Section “J-Link / J-Trace models” updated.4.580121126JLChapter “Working with J-Link”* Section “J-Link script files”Sub-section “Executing J-Link script files” updated.4.56b0121112JLChapter “Related Software”* Section “J-Link SWO Viewer”Added sub-section “Configure SWO output after device reset”J-Link / J-Trace (UM08001) 2004-2019 SEGGER Microcontroller GmbH
6JLChapter “Related Software”* Section “J-Link Commander”Renamed “Commander script files” to “Commander files” and“script mode” to “batch mode”.4.560121022AGRenamed “J-Link TCP/IP Server” to “J-Link Remote Server”4.541121009JLChapter “Related Software”* Section “TCP/IP Server”, subsection “Tunneling Mode” added.4.540120913ELChapter “Flash Breakpoints”* Section “Licensing” updated.Chapter “Device specifics”* Section “Freescale”, subsection “Data flash support” added.4.53c0120904ELChapter “Licensing”* Section “Device-based license” updated.4.51h0120717ELChapter “Flash download”* Section “J-Link commander” updated.Chapter “Support and FAQs”* Section “Frequently asked questions” updated.Chapter “J-Link and J-Trace related software”* Section “J-Link Commander” updated.4.51e1120704ELChapter “Working with J-Link”* Section “Reset strategies” updated and corrected. Added reset type 8.4.51e0120704AGChapter “Device specifics”* Section “ST” updated and corrected.4.51b0120611ELChapter “J-Link and J-Trace related software”* Section “SWO Viewer” added.4.51a0120606ELChapter “Device specifics”* Section “ST”, subsection “ETM init” for some STM32 devices added.* Section “Texas Instruments” updated.Chapter “Target interfaces and adapters”* Section “Pinout for SWD” updated.4.47a0120419AGChapter “Device specifics”* Section “Texas Instruments” updated.4.460120416ELChapter “Support” updated.4.420120214ELChapter “Working with J-Link”* Section “J-Link script files” updated.4.361110927ELChapter “Flash download” added.Chapter “Flash breakpoints” added.Chapter “Target interfaces and adapters”* Section “20-pin JTAG/SWD connector” updated.Chapter “RDI” added.Chapter “Setup” updated.Chapter “Device specifics” updated.4.360110909AGChapter “Working with J-Link”* Section “J-Link script files” updated.4.261110513KNChapter “Introduction”* Section “J-Link / J-Trace models” corrected.4.260110427KNSeveral corrections.AGChapter “Introduction”* Section “J-Link / J-Trace models” corrected.Chapter “Device specifics”* Section “ST Microelectronics” updated.4.2411102284.240110216AGChapter “Device specifics”* Section “Samsung” added.Chapter “Working with J-Link”* Section “Reset strategies” updated.Chapter “Target interfaces and adapters”* Section “9-pin JTAG/SWD connector” added.4.23d0110202AGChapter “J-Link and J-Trace related software”* Section “J-Link software and documentation package in detail” updated.Chapter “Introduction”* Section “Built-in intelligence for supported CPU-cores” added.J-Link / J-Trace (UM08001) 2004-2019 SEGGER Microcontroller GmbH
30AGChapter “Working with J-Link”* Section “Reset strategies” updated.Chapter “Device specifics”* Section “Freescale” updated.Chapter “Flash download and flash breakpoints* Section ”Supported devices“ updated* Section ”Setup for different debuggers (CFI flash)“ updated.4.210101025AGChapter ”Device specifics“* Section ”Freescale“ updated.4.20j0101019AGChapter ”Working with J-Link“* Section ”Reset strategies“ updated.4.20b0100923AGChapter ”Working with J-Link“* Section ”Reset strategies“ updated.0.0090100818AGChapter ”Working with J-Link“* Section ”J-Link script files“ updated.* Section ”J-Link Command Strings“ updated.Chapter ”Target interfaces and adapters“* Section ”19-pin JTAG/SWD and Trace connector“ corrected.Chapter ”Setup“* Section ”J-Link Configurator added.“0.0089100630AGSeveral corrections.0.0088100622AGChapter ”J-Link and J-Trace related software“* Section ”SWO Analyzer“ added.0.0087100617AGSeveral corrections.0.0086100504AGChapter ”Introduction“* Section ”J-Link / J-Trace models“ updated.Chapter ”Target interfaces and adapters“* Section ”Adapters“ updated.0.0085100428AGChapter ”Introduction“* Section ”J-Link / J-Trace models“ updated.0.0084100324KNChapter ”Working with J-Link and J-Trace“* Several correctionsChapter Flash download & flash breakpoints* Section ”Supported devices“ updated0.0083100223KNChapter ”Introduction“* Section ”J-Link / J-Trace models“ updated.0.0082100215AGChapter ”Working with J-Link“* Section ”J-Link script files“ added.0.0081100202KNChapter ”Device Specifics“* Section ”Luminary Micro“ updated.Chapter ”Flash download and flash breakpoints“* Section ”Supported devices“ updated.0.0080100104KNChapter ”Flash download and flash breakpoints* Section “Supported devices” updated0.0079091201AGChapter “Working with J-Link and J-Trace”* Section “Reset strategies” updated.Chapter “Licensing”* Section “J-Link OEM versions” updated.0.0078091023AGChapter “Licensing”* Section “J-Link OEM versions” updated.0.0077090910AGChapter “Introduction”* Section “J-Link / J-Trace models” updated.KNChapter “Introduction”* Section“ Specifications” updated* Section “Hardware versions” updated* Section “Common features of the J-Link product family” updatedChapter “Target interfaces and adapters”* Section “5 Volt adapter” updatedAGChapter “Introduction”* Section “J-Link / J-Trace models” updated.Chapter “Working with J-Link and J-Trace”* Section “SWD interface” updated.0.000.007675J-Link / J-Trace (UM08001)090828090729 2004-2019 SEGGER Microcontroller GmbH
1ByDescriptionKNChapter “Introduction”* Section “Supported IDEs” added* Section “Supported CPU cores” updated* Section “Model comparison chart” renamed to“Model comparison”* Section “J-Link bundle comparison chart” removedKNChapter “Introduction”* Section “J-Link and J-Trace models” added* Sections “Model comparison chart” &“J-Link bundle comparison chart”addedChapter “J-Link and J-Trace models” removedChapter “Hardware” renamed to “Target interfaces & adapters”* Section “JTAG Isolator” addedChapter “Target interfaces and adapters”* Section “Target board design” updatedSeveral corrections0.0072090618AGChapter “Working with J-Link”* Section “J-Link control panel” updated.Chapter “Flash download and flash breakpoints”* Section “Supported devices” updated.Chapter “Device specifics”* Section “NXP” updated.0.0071090616AGChapter “Device specifics”* Section “NXP” updated.0.0070090605AGChapter “Introduction”* Section “Common features of the J-Linkproduct family” updated.AGChapter “Working with J-Link”* Section “Reset strategies” updated.* Section “Indicators” updated.Chapter “Flash download and flash breakpoints”* Section “Supported devices” updated.0.00690905150.0068090428AGChapter “J-Link and J-Trace related software”* Section “J-Link STM32 Commander” added.Chapter “Working with J-Link”* Section “Reset strategies” updated.0.0067090402AGChapter “Working with J-Link”* Section “Reset strategies” updated.0.0066090327AGChapter “Background information”* Section “Embedded Trace Macrocell (ETM)” updated.Chapter “J-Link and J-Trace related software”* Section “Dedicated flash programming utilities for J-Link” updated.0.0065090320AGSeveral changes in the manual structure.0.0064090313AGChapter “Working with J-Link”* Section “Indicators” added.0.0063090212AGChapter “Hardware”* Several corrections.* Section “Hardware Versions” Version 8.0 added.0.0062090211AGChapter “Working with J-Link and J-Trace”* Section “Reset strategies” updated.Chapter J-Link and J-Trace related software* Section “J-Link STR91x Commander (Command line tool)” updated.Chapter “Device specifics”* Section “ST Microelectronics” updated.Chapter “Hardware” updated.0.0061090120TQChapter “Working with J-Link”* Section “Cortex-M3 specific reset strategies”0.0060090114AGChapter “Working with J-Link”* Section “Cortex-M3 specific reset strategies”0.0059090108KNChapter Hardware* Section “Target board design for JTAG” updated.* Section “Target board design for SWD” added.0.0058090105AGChapter “Working with J-Link Pro”* Section “Connecting J-Link Pro the first time” updated.J-Link / J-Trace (UM08001) 2004-2019 SEGGER Microcontroller GmbH
onAGChapter “Working with J-Link Pro”* Section “Introduction” updated.* Section “Configuring J-Link Pro via web interface” updated.Chapter “Introduction”* Section “J-Link Pro overview” updated.0.0056081219AGChapter “Working with J-Link Pro”* Section “FAQs” added.Chapter “Support and FAQs”* Section “Frequently Asked Questions” updated.0.0055081218AGChapter “Hardware” updated.0.0054081217AGChapter “Working with J-Link and J-Trace”* Section “J-Link Command Strings” updated.0.0053081216AGChapter “Working with J-Link Pro” updated.0.0052081212AGChapter “Working with J-Link Pro” added.Chapter “Licensing”* Section “Original SEGGER products” updated.0.0051081202KNSeveral corrections.0.0050081030AGChapter “Flash download and flash breakpoints”* Section “Supported devices” corrected.0.0049081029AGSeveral corrections.0.0048080916AGChapter “Working with J-Link and J-Trace”* Section “Connecting multiple J-Links /J-Traces to your PC” updated.0.0047080910AGChapter “Licensing” updated.0.0046080904AGChapter “Licensing” added.Chapter “Hardware”Section “J-Link OEM versions” moved to chapter “Licensing”0.0045080902AGChapter “Hardware”Section “JTAG Trace connector” JTAG Traceconnector pinout corrected.Section “J-Link OEM versions” updated.0.0044080827AGChapter “J-Link control panel” moved to chapter “Working with J-Link”.Several corrections.0.0043080826AGChapter “Flash download and flash breakpoints”Section “Supported devices” updated.0.0042080820AGChapter “Flash download and flash breakpoints”Section “Supported devices” updated.0.0041080811AGChapter “Flash download and flash breakpoints” updated.Chapter “Flash download and flash breakpoints”,section “Supported devices” updated.0.0040080630AGChapter “Flash download and flash breakpoints” updated.Chapter “J-Link status window” renamed to “J-Link control panel”Various corrections.AGChapter “Flash download and flash breakpoints”Section “Licensing” updated.Section “Using flash download and flashbreakpoints with different debuggers” updated.Chapter “J-Link status window” added.0.00390806270.0038080618AGChapter “Support and FAQs”Section “Frequently Asked Questions” updatedChapter “Reset strategies”Section “Cortex-M3 specific reset strategies” updated.0.0037080617AGChapter “Reset strategies”Section “Cortex-M3 specific reset strategies” updated.0.0036080530AGChapter “Hardware”Section “Differences between different versions” updated.Chapter “Working with J-Link and J-Trace”Section “Cortex-M3 specific reset strategies” added.0.0035080215AGChapter “J-Link and J-Trace related software”Section “J-Link software and documentation package in detail” updated.J-Link / J-Trace (UM08001) 2004-2019 SEGGER Microcontroller GmbH
12AGChapter “J-Link and J-Trace related software”Section “J-Link TCP/IP Server (Remote J-Link / J-Trace use)” updated.Chapter “Working with J-Link and J-Trace”Section “J-Link Command Strings” updated.Chapter “Flash download and flash breakpoints”Section “Introduction” updated.Section “Licensing” updated.Section “Using flash download and flash breakpoints withdifferent debuggers” updated.0.0033080207AGChapter “Flash download and flash breakpoints” addedChapter “Device specifics:”Section “ATMEL - AT91SAM7 - Recommended init sequence” added.0.0032080129SKChapter “Device specifics”:Section “NXP - LPC - Fast GPIO bug” list of device enhanced.0.0031080103SKChapter “Device specifics”:Section “NXP - LPC - Fast GPIO bug” updated.0.0030071211AGChapter “Device specifics”:Section “Analog Devices” updated.Section “ATMEL” updated.Section “Freescale” added.Section “Luminary Micro” added.Section “NXP” updated.Section “OKI” added.Section “ST Microelectronics” updated.Section “Texas Instruments” updated.Chapter “Related software”:Section “J-Link STR91x Commander” updated0.0029070912SKChapter “Hardware”, section “Target board design” updated.0.0028070912SKChapter “Related software”:Section “J-LinkSTR91x Commander” added.Chapter “Device specifics”:Section “ST Microelectronics” added.Section “Texas Instruments” added.Subsection “AT91SAM9” added.0.0028070912AGChapter “Working with J-Link/J-Trace”:Section “J-Link Command Strings” updated.0.0027070827TQChapter “Working with J-Link/J-Trace”:Section “J-Link Command Strings” updated.SKChapter “Introduction”:Section “Features of J-Link” updated.Chapter “Background Information”:Section “Embedded Trace Macrocell” added.Section “Embedded Trace Buffer” added.0.00260707100.0025070516SKChapter “Working with J-Link/J-Trace”:Section “Reset strategies in detail”- “Software, for Analog Devices ADuC7xxx MCUs” updated- “Software, for ATMEL AT91SAM7 MCUs” added.Chapter “Device specifics”Section “Analog Devices” added.Section “ATMEL” added.0.0024070323SKChapter “Setup”:“Uninstalling the J-Link driver” updated.“Supported ARM cores” updated.0.0
Chapter "J-Link software and documentation package" * Section "J-Link GDB Server": Command line options corrected. 6.44 0 190306 NV Chapter "J-Link software and documentation package" * Section "J-Link Commander": Added memory zone example for com-mand "mem". 6.42 0 190215 NV Chapter "Working with J-Link and J-Trace"
STM is a trace element which allows for several types of trace messages to be added to a trace stream. This trace stream may or may not also contain instruction flow trace streams. Adding STM messaging has several effects. STM trace messages can be a way of tracing the high-level state of the SoC-based system.
La paroi exerce alors une force ⃗ sur le fluide, telle que : ⃗ J⃗⃗ avec S la surface de la paroi et J⃗⃗ le vecteur unitaire orthogonal à la paroi et dirigé vers l’extérieur. Lorsque la
1 2 3 5 4 Viv Lounge Chair 5 Trace 800 Coffee Table Circular Top Options Base Options Resources 3D visualisation models, 2D DWG and Revit files are available for all naughtone products Download the files from our website www.naughtone.com trace Small Table 1 Trace Coffee Table 2 Trace 800 Coffee Table Circular 3 Trace Side Table Images All images shown here and many others can be downloaded .
3.2. tips from our trace experience 28 3.3. evaluating your trace campaigns and use of tools 31 Using TAToo to analyse your data 35 Stories from the TRACE pilot sites 39 5.1. Traffic Snake Game 40 5.2. positive drive 44 5.3. biklio 50 TRACE recommendations 53 6.1. General recommendations 54 6.2.
Chapter "J-Link software and documentation package" * Section "J-Link GDB Server": Command line options corrected. 6.44 0 190306 NV Chapter "J-Link software and documentation package" * Section "J-Link Commander": Added memory zone example for com-mand "mem". 6.42 0 190215 NV Chapter "Working with J-Link and J-Trace"
For each open trace, the session man- formation. ager saves the name of the file containing 1 Trace fik. Traceview processes event 67 trace file input session configuration saving and restoring Session manager Trace manager ]*[Disploy Luger 1 U Figure 2. Tmcevim a &temwe. traces. An event is a recorded instance of
APB200 - Advanced Debugging using the Ashling MPC5500 Tools Page 4 of 16 2. The e200 Code tab can be left at default settings i.e.: Figure 5. e200 Code Dialog 3. The e200 Data tab should be set as shown below. Set Start Emitting Data Trace to On Program Execution and Stop Emitting Data Trace to On Program Halt. Set Data Trace Region 0 Trace Type to Write Trace and the Start Address and End .
Alex Rider had made his own choices. He should have been at school, but instead, for whatever reason, he had allowed the Special Operations Division of MI6 to recruit him. From schoolboy to spy. It was certainly unusual – but the truth was, he had been remarkably successful. Beginner’s luck, maybe, but he had brought an end to an operation that had been several years in the planning. He .
