REGAL STONE DESIGN CHARTS - Keystone Walls

1y ago
8 Views
1 Downloads
808.75 KB
7 Pages
Last View : 15d ago
Last Download : 3m ago
Upload by : Louie Bolen
Transcription

REGAL STONE DESIGN CHARTS

REGAL STONE - DESIGN CHARTS DESIGN/ESTIMATING CHARTS This section contains Keystone's design/estimating charts for Regal Stone series gravity walls or geogrid-reinforced walls. The gravity wall charts help determine the maximum possible gravity wall height before geogrid reinforcement is required. The wall charts consider multiple factors for determining gravity wall stability and the necessary geogrid length. First, determine the wall load condition that most closely resembles the final project conditions. Then select the soil condition that most closely matches the project site soils. Finally, select the wall height (including embedment) that will best fit the project wall profile. The design/estimating charts in this section are to be used for reference and preliminary design and estimating only. These charts are not to be considered as a standardized engineering document. A qualified professional should be consulted for final design assistance. Keystone accepts no liability for the use of these charts. The information contained herein has been compiled by Keystone Retaining Wall Systems LLC and to the best of our knowledge, accurately represents the Keystone product used in the applications which are illustrated. Final determination of the suitability for the use contemplated and its manner of use are the sole responsibility of the user. Design and analysis shall be performed by a qualified engineer. 2 Keystone Construction Manual Regal Stone Units

REGAL STONE - DESIGN CHARTS Gravity Wall Schematic B:1 - MAXIMUM HEIGHT GRAVITY WALL Slope Total Height 1 Retaining Soil Type 1 - inch Setback - Regal Stone MAX HGT. ONE INCH SETBACK WALL 1⅛ INCH SETBACK WALL BACKSLOPE Soil Type Level 4H:1V 3H:1V 2H:1V Sand/Gravel 4.25' 3.25' 3.25' 2.75' Silty Sand 3.25' 2.75' 2.25' 1.75' Silt/Lean Clay 2.75' 2.25' 1.75' 1.0' (1" (25mm) min. setback per unit) NOTES: Wall height (H) is the total height from top to bottom. Minimum wall embedment should be 6-inches or one unit below grade, whichever is greater. Subsurface soils must be capable of supporting wall system. Unit drainage fill is ¾-inch clean crushed stone. Leveling pad is crushed stone base material. All backfill materials are compacted to minimum 95% standard proctor density or 92% modified proctor density. Finished grade must provide positive drainage. C alculations assume a unit weight of 120 pcf for all soil types. Assumed angles for earth pressure calculations are: Sand/Gravel 34 , Silty Sand 30 and Sandy Silt/Lean Clay 26 . Walls are non-critical structures with FS 1.5. Gravity wall charts are performed using Coulomb earth pressure analysis. (NCMA 3rd Edition) Walls utilize 10.6 batter. No surcharges, except slopes, were used in the analysis. S urcharges or special loading conditions will reduce maximum wall heights. Sliding calculations assume a 6-inch crushed stone leveling pad as compacted foundation material. The information provided is for preliminary design use only. A qualified professional REGAL STONE The information contained herein has been compiled by Keystone Retaining Wall Systems LLC and to the best of our knowledge, accurately represents the Keystone product used in the applications which are illustrated. Final determination of the suitability for the use contemplated and its manner of use are the sole responsibility of the user. Design and analysis shall be performed by a qualified engineer. 3 Keystone Construction Manual Regal Stone Units

The Keystone reinforced wall charts are graphically presented to show the proper location and lengths of geogrids used with Keystone Regal Stone units at 1⅛-inch setback batter (10.6 ). The chart includes design heights from 4.25 feet tall to 10.25 feet tall. Engineering judgment should be used when interpolating between heights. In general, geogrid should be placed at the design elevation for the entire wall length or until a wall step is reached. These preliminary design and estimating charts are for individual walls and do not apply to any tiered wall applications. Minimum reinforcement lengths were set for 4-feet and a 70% reinforcement length-to-wall height ratio. Top layers of geogrid shall never be more than 3 units from the top of the wall. Bottom layers of geogrid shall never be more than 3 units from the top of the leveling pad. Soil ranges were selected to approximate good, medium and poor soil conditions to cover the typical design range. Wall height is the total height of the wall from the top of the leveling pad to the top of the wall. The charts use Coulomb earth pressure theory, based on NCMA 3rd Edition for calculations. The following charts assume the use of a coated polyester geogrid with a minimum allowable design strength of: LTDS 1,800 plf, Tal 1,200 plf. The following geogrid types are suitable with these design charts: (1) Miragrid 3XT by TC Mirafi, (2) Stratagrid 200 by Strata Systems and (3) Synteen SF35 by Synteen. 250 psf surcharge is applied 6-inches behind the tail of the units. All geogrid lengths shown are the actual lengths of geogrid required as measured from the front wall face to the end of the geogrid. The charts assume that the walls are constructed in accordance with Keystone specifications and good construction practice. All soil zones (reinforced, retained, and foundation) must be compacted in 6-inch lifts to minimum 95% standard proctor density or 92% modified proctor density as determined by laboratory testing. The information contained in the design/estimating charts are for preliminary design and estimating use only. A qualified professional should be consulted for final design assistance. Keystone accepts no liability for the use of these charts. B:2 - REINFORCED WALL SCHEMATIC NOTES: Wall height (H) is the total height from top to bottom. Setback Keystone Units Minimum wall embedment is 6-inches. Backslope or Surcharge Cap Unit Finished Grade Subsurface soils must be capable of supporting the wall system. Low permeability Soil Reinforced Soil Zone Leveling pad is crushed stone base material. Retained Soil Zone Wall Height Geosynthetic Reinforcement Limit of Excavation Embedment Unit Drainage Fill Leveling Pad Drainage Collection Pipe Unit drainage fill is ¾-inch clean crushed stone. All backfill materials are compacted to 95% standard proctor density or 92% modified proctor density. Geogrids must be of appropriate type and length per the design. Finished grade must provide positive drainage. The symbol 5' indicates location and length of geogrid measured from the front of the wall to the end of the geogrid. The information contained herein has been compiled by Keystone Retaining Wall Systems LLC and to the best of our knowledge, accurately represents the Keystone product used in the applications which are illustrated. Final determination of the suitability for the use contemplated and its manner of use are the sole responsibility of the user. Design and analysis shall be performed by a qualified engineer. 4 Keystone Construction Manual Regal Stone Units REGAL STONE - DESIGN CHARTS Design/Estimating Charts: Reinforced Wall Charts

REGAL STONE UNITS - 1⅛-INCH SETBACK SAND/GRAVEL: 34 , 120 pcf NO SURCHARGE CASE 1: Level - No Surcharge 8' NO SURCHARGE H H H 7' NO SURCHARGE REINFORCED SOIL ZONE 5.25' 5' 5' 5.25' 4.25' 5.25' 7.75' 5' 8' 8'8' 9.25' 10.25' 7'7' 9.25' 6' 7.75' 6.75' 8' 8'8' 7' 7'7' 6'6' 5'5' 6.75' 5' 7.75' 6.75' 5'5' 4.25' 5'5' 8' 8'8' 7' 7' 7'7' 6' 6' 6' 6' 6'6' 5' 5' 5' 5' 5' 4.25' 7' 7' 6' 5' 8' 8' 7' 6' 5' 5' REINFORCED SOIL ZONE REINFORCED SOIL ZONE 7' 6' 8'8' 10.25' 8' 7' 9.25' 10.25' CASE 2: Level - 250 psf Surcharge 250 PSF SURCHARGE 8' 250 PSF SURCHARGE H H H 7' 250 PSF SURCHARGE REINFORCED SOIL ZONE 5' 4' 5' 4' 4' 5' 5' 5' 5.25' 4.25' 4'4' 5' 6' 6' 5.25' 4.25' 5.25' 5' 7.75' 6.75' 6.75' 6' 7.75' 9.25' 7.75' 6.75' 8' 8'8' 10.25' 7'7' 9.25' 6' 8' 8'8' 7' 7'7' 6'6' 6'6' 5'5' 4.25' 4' 6'6' 8' 8'8' 7' 7' 7'7' 6' 6' 6' 6' 6'6' 6' 6' 8' 8' 7' 7' 7' 6' 6' REINFORCED SOIL ZONE REINFORCED SOIL ZONE 7' 6' 8'8' 10.25' 8' 7' 9.25' 10.25' CASE 3: 3H:1V Backslope 1 1 1 H H H 3 3 8' 8' 3 REINFORCED SOIL ZONE 4' 5' 4' 4' 5' 5' 5' 5' 5.25' 4.25' 4'4' 4.25' 4' 7' 6' 5' 7.75' 6.75' 6.75' 6' 7.75' 9.25' 7' 8' 8'8' 8' 8'8' 7'7' 6'6' 5'5' 5.25' 6'6' 8' 8'8' 8' 8' 8'8' 7' 7' 7' 7' 7'7' 6' 6' 8' 8' 8' 8' 8' 7' 6' 5' REINFORCED SOIL ZONE REINFORCED SOIL ZONE 8' 7' 10.25' 8'8' 9.25' 8' 8'8' 8' 8'8' 10.25' 8' The information contained herein has been compiled by Keystone Retaining Wall Systems LLC and to the best of our knowledge, accurately represents the Keystone product used in the applications which are illustrated. 7.75' 10.25' 6.75' 4.25' Final determination of the suitability for the use contemplated and its 5.25' manner of use are the sole responsibility of the user. Design and analysis shall 9.25' be performed by a qualified engineer. 5 Keystone Construction Manual Regal Stone Units REGAL STONE - DESIGN CHARTS Design/Estimating Charts: Reinforced Wall Charts

REGAL STONE UNITS - 1⅛-INCH SETBACK SILTY SAND: 30 , 120 pcf NO SURCHARGE CASE 1: Level - No Surcharge 8' NO SURCHARGE H H H 7' NO SURCHARGE REINFORCED SOIL ZONE 4' 5' 4' 4' 5' 5' 5' 5.25' 4.25' 4'4' 5' 5' 5.25' 4.25' 5.25' 6.75' 5' 7.75' 7.75' 5' 8' 8'8' 9.25' 10.25' 7'7' 9.25' 6' 7.75' 6.75' 8' 8'8' 7' 7'7' 6'6' 5'5' 8' 8'8' 7' 7' 7'7' 6' 6' 6' 6' 6'6' 5'5' 6.75' 5'5' 4.25' 4' 7' 7' 6' 5' 5' 8' 8' 7' 6' 5' 5' REINFORCED SOIL ZONE REINFORCED SOIL ZONE 7' 6' 8'8' 10.25' 8' 7' 9.25' 10.25' CASE 2: Level - 250 psf Surcharge 250 PSF SURCHARGE 9' 250 PSF SURCHARGE H H H 8' 250 PSF SURCHARGE REINFORCED SOIL ZONE 6' 6' 6' 6' 6' 6' 6' 6' 5.25' 4.25' 6'6' 6' 7' 6' 5.25' 4.25' 5.25' 6' 7.75' 6.75' 6.75' 6' 7.75' 9.25' 7.75' 6.75' 9' 9'9' 10.25' 8'8' 9.25' 7' 9' 9'9' 8' 8'8' 7'7' 6'6' 6'6' 4.25' 6' 6'6' 9' 9'9' 8' 8' 8'8' 7' 7' 7' 7' 7'7' 6' 6' 9' 9' 8' 8' 8' 7' 6' REINFORCED SOIL ZONE REINFORCED SOIL ZONE 8' 7' 9'9' 10.25' 9' 8' 9.25' 10.25' CASE 3: 3H:1V Backslope 1 1 1 H H H 3 3 9' 8' 3 REINFORCED SOIL ZONE 5' 5.25' 5'5' 4.25' 5' 5' 5' 5' 6' 5' 7.75' 6.75' 6.75' 6' 7.75' 9.25' 7' 9' 9'9' 8' 8'8' 7'7' 6'6' 5'5' 5.25' 6'6' 9' 9'9' 8' 8' 8'8' 7' 7' 7' 7' 7'7' 6' 6' 5' 5' 5' 4.25' 7' 5' 9' 9' 8' 8' 8' 7' 6' 5' REINFORCED SOIL ZONE REINFORCED SOIL ZONE 8' 7' 10.25' 8'8' 9.25' 9' 9'9' 8' 9'9' 10.25' 9' The information contained herein has been compiled by Keystone Retaining Wall Systems LLC and to the best of our knowledge, accurately represents the Keystone product used in the applications which are illustrated. 7.75' 10.25' 6.75' 4.25' Final determination of the suitability for the use contemplated and its 5.25' manner of use are the sole responsibility of the user. Design and analysis shall 9.25' be performed by a qualified engineer. 6 Keystone Construction Manual Regal Stone Units REGAL STONE - DESIGN CHARTS Design/Estimating Charts: Reinforced Wall Charts

REGAL STONE UNITS - 1⅛-INCH SETBACK SILT/LEAN CLAY: 26 , 120 pcf NO SURCHARGE CASE 1: Level - No Surcharge 9' NO SURCHARGE H H H 8' NO SURCHARGE REINFORCED SOIL ZONE 5' 5' 5' 5' 5' 5' 5' 5' 5.25' 4.25' 5'5' 7' 6' 5.25' 4.25' 5.25' 6.75' 6' 7.75' 7.75' 9' 9'9' 8' 8'8' 9' 9'9' 9.25' 7'7' 6'6' 6.75' 5' 7.75' 6.75' 5'5' 4.25' 5' 6'6' 9' 9'9' 8' 8' 8'8' 7' 7' 7' 7' 7'7' 6' 6' 9' 9' 8' 8' 8' 7' 6' 5' REINFORCED SOIL ZONE REINFORCED SOIL ZONE 8' 7' 7' 10.25' 8'8' 9.25' 9'9' 10.25' 9' 8' 9.25' 10.25' CASE 2: Level - 250 psf Surcharge 250 PSF SURCHARGE 250 PSF SURCHARGE H H H 250 PSF SURCHARGE REINFORCED SOIL ZONE REINFORCED SOIL ZONE REINFORCED SOIL ZONE ENGINEER SHOULD EVALUATE DESIGN FOR POOR SOILS AND BACKSLOPES. 7' 6' 7' 6' 7' 6' 4.25' ENGINEER SHOULD EVALUATE DESIGN FOR POOR SOILS AND BACKSLOPES. 7' 7' 7' 6' 6' 7'7' 5.25' 6'6' 6.75' 7'7' 6' 4.25' 6' 5.25' 4.25' 5.25' 7' 7' ENGINEER SHOULD EVALUATE DESIGN FOR 7.75'SOILS AND BACKSLOPES. 9.25' 10.25' POOR 6.75' 7.75' 9.25' 10.25' 6.75' 7.75' 9.25' 10.25' CASE 3: 3H:1V Backslope 1 1 1 H H H 3 3 3 REINFORCED SOIL ZONE REINFORCED SOIL ZONE REINFORCED SOIL ZONE ENGINEER SHOULD EVALUATE DESIGN FOR POOR SOILS AND BACKSLOPES. 6' 5' 6' 5' 5' 6' 6' 6' 5.25' 4.25' 5'5' 4.25' 5' 6' ENGINEER SHOULD EVALUATE DESIGN FOR POOR SOILS AND BACKSLOPES. 6.75' 6'6' 5.25' 6' 6.75' ENGINEER SHOULD EVALUATE DESIGN FOR 7.75'SOILS AND BACKSLOPES. 9.25' 10.25' POOR 7.75' 9.25' 10.25' The information contained herein has been compiled by Keystone Retaining Wall Systems LLC and to the best of our knowledge, accurately represents the Keystone product used in the applications which are illustrated. 5.25' of use are the sole6.75' 9.25' 10.25' 4.25' Final determination of the suitability for the use contemplated and its manner responsibility of the user.7.75' Design and analysis shall be performed by a qualified engineer. 7 Keystone Construction Manual Regal Stone Units REGAL STONE - DESIGN CHARTS Design/Estimating Charts: Reinforced Wall Charts

2 Keystone Constrction Manal Regal Stone Units The information contained herein has been compiled by Keystone Retaining Wall Systems LLC and to the best of or knoledge, accrately represents the Keystone prodct sed in the applications hich are illstrated. Final determination of the sitability for the se contemplated and its manner of se are the sole responsibility of the ser. Design and .

Related Documents:

2 Keystone Constrction Manal Regal Stone Pro Units The information contained herein has been compiled by Keystone Retaining Wall Systems LLC and to the best of or knoledge, accrately represents the Keystone prodct sed in the applications hich are illstrated. Final determination of the sitability for the se contemplated and its manner of se are the sole responsibility of the ser. Design and .

Medical-Only HMO, Keystone 65 Select Medical-Only HMO, and Keystone 65 Select Rx HMO have networks of doctors, hospitals, pharmacies, and other providers. Keystone 65 Basic Rx HMO, Keystone 65 Liberty Medical-Only HMO, Keystone 65 Select Medical-Only HMO, and Keystone 65 Select Rx HMO: If you use providers that are not in

Added KeyStone II specifics to SRTP examples (Page 3-8) Added mention of KeyStone II engine to Protocol Descriptions. (Page 2-5) Added Specifics for IPsec in KeyStone II devices at IPsec Examples. (Page 3-3) Included SRTP KeyStone II Updates (Page 2-21) Put KeyStone II specification in IPSEC Use (Page 2-11)

KE01053 Keystone Literature - English as a Second Language X KV01053 Keystone Literature - Visually Impaired X KH01053 Keystone Literature - Hearing Impaired X KAE01053 Keystone Literature - Alternative Education X K01005 Keystone – AP English Language and Composition X X X K01006 Keystone – AP Engl

Keystone First Keystone First . July 1, 2018 P.O. Box 7307 P.O. Box 7316 London, KY 40742 London, KY 40742 . Keystone First will send the Health Care Provider a letter acknowledging Keystone First's receipt of the request for a First Level Appeal Review within ten business days of Keystone .

2 Keystone Constrction Manal Keystone Standard Units The information contained herein has been compiled by Keystone Retaining Wall Systems LLC and to the best of or knoledge, accrately represents the Keystone prodct sed in the applications hich are illstrated. Final determination of the sitability for the se contemplated and its manner of se are the so

Keystone Stonegate Country Manor’s smooth face looks like cut stone and presents a more refined look. Utilizing Keystone’s patented fiberglass pin connection method, Keystone Stonegate Country Manor offers the same freestanding wall options as Keystone Country Ma

The ASM Handbook should be regarded as a set of actions implemented by the ECAC States to be used in conjunction with the EUROCONTROL Specification for the application of the Flexible Use of Airspace (FUA). The ASM Handbook should neither be considered as a substitute for official national regulations in individual ECAC States nor for the ASM Part of the ICAO European Region Air Navigation .