LEEB HARDNESS TESTER TH130/132/134 - Alatuji
LEEB HARDNESS TESTER TH130/132/134 Features: Impact size, easy operation Wide measuring range in HLD, direct display of converted hardness values in HB, HRB, HRC,HRA, HV, HS High applicability, can be used for hardness testing of most metals Test at any angle even upside down Optional printer TA250 available Easy measurement on large & heavy workpieces Measuring in confined spaces of large workpieces TH130: integrated with D impact device for normal hardness testing TH132: integrated with C impact device for hardness testing on thin, light and face-hardened workpieces TH134: integrated with DL impact device for hardness testing of deep grooves and mould-face (such as tooth surface) workpieces Refer to page 8 for technical specifications of various impact devices Technical Specification TH130 TH132 TH134 Impact device D integrated C integrated DL integrated Hardness scales HLD, HB, HRC, HRA, HV, HS HLD, HB, HRC, HV, HS See table in page 7 HLDL,HB, HRC, HRB, HV, HS Measuring range/materials Tolerance Memory Output 6HLD(760 30HLD) 12HLC 12HLDL 99 average readings 99 average readings 99 average readings RS232 to printer RS 232 to printer RS232 to printer Surface Roughness of Work piece 1.6 (Ra) 0.4 (Ra) 1.6 (Ra) Rmin 50mm(with support ring Rmin 10mm) Rmin 11mm (with support rings) Rmin 10mm Min. Work piece weight 2 5kg on stable support 0.05 2kg with compact coupling 0.5 1.5kg on stable support 0.02 0.5kg with compact coupling 2 5kg on stable support 0.05 2kg with compact coupling Min. Work piece thickness with coupling 5mm 1mm 5mm 0.8mm 0.2mm 0.8mm Min. radius of Work piece (convex / concave) Min. Thickness of hardened layers 1 1 1 1 1 1 1 1 1 Optional Accessory Support rings (See page 9) Printer TA230 (see page 47) 3h Charging time Continuous working time 60 h Rechargeable Li-ion batteries Power Operating temperature Weight Main Unit Test block Charger Brush Connecting cable for TH130 Protection pocket TIME certificate Instruction manual Warranty card See table in page 8 Indentation depth Overall dimensions Standard Delivery 0 40 155 24 180 g 55mm 155 24 55mm 210 24 55mm 200g 175g TH134 needle impact device integrated 1
LEEB HARDNESS TESTER TH150/152/154 Features: Fashionable face and compact size Available of conversion among HL, HRB, HRC, HB, HV, HS Large LCD with backlight Memory up to 256 data Connecting with printer by RS232 Low battery indication Test at any direction, even upside down TH150: integrated with D impact device for normal hardness testing TH152: integrated with C impact device for hardness testing on thin, light and face-hardened workpieces TH154: integrated with DL impact device for hardness testing of deep grooves and mould-face (such as tooth surface) workpieces Refer to page 8 for technical specifications of various impact devices Technical Specification TH150 TH152 TH154 Impact device D integrated C integrated DL integrated Hardness scales HLD, HB, HRC, HRB, HV, HS HLC, HB, HRC, HRB, HV, HS HLDL, HB, HRC, HRB, HV, HS See table in page 7 Measuring range / materials Tolerance 6HLD(760 30HLD) 12HLDL RS232 to printer Output Surface Roughness of Work piece Min. radius of Work piece (convex/concave) 12HLC 256 average readings Memory 1.6 ( Ra) 0.4 Rmin 11mm (with support ring Rmin 10mm) ( Ra) 1.6 Rmin 11mm (with support ring ) ( Ra) Rmin 50mm (with support ring Rmin 10mm) 2 5kg on stable 0.5 1.5kg on stable 2 5kg on stable Min. Work piece weight support0.05 2kg with support0.02 0.5kg with support0.05 2kg with compact coupling compact coupling compact coupling Min. Work piece thickness with coupling Min. Thickness of hardened layers 5mm 1mm 5mm 0.8mm 0.2mm 0.8mm Indentation depth 1 1 1 1 1 1 1 1 Optional Accessory Support rings (See page 9) Printer TA230 (see page 47) Batteries 3V Li-ion CR1/2 AA Power 0 40 Operating temperature Weight Main Unit Test block Brush Battery 3V Li CR1/2 AA Connecting cable TIME certificate Instruction manual Warranty card See table in page 8 300 h (without backlight) Continuous working time Dimensions Standard Delivery 158 60 150 g 39mm 149 60 39mm 213 60 170 g 145g 2 39mm TH154 needle impact device integrated
LEEB HARDNESS TESTER TH170 Features: USB communication interface Automatic identification of Impact test direction Memory of 270 average readings in 9 files Upper and lower limit setting Automatically switch off Backlight for convenient use in darkness Battery capacity display AAA 1.5V battery Integrated calibration function Technical Specification Standard Impact Device D integrated Hardness scales HLD, HB, HRC, HRB, HV, HS Measuring range / materials See table in page 7 Measuring direction 360 Tolerance 6HLD(760 Standard Delivery 30HLD) Memory 270 average readings in 9 group files Output USB2.0 Surface Roughness of Work piece 1.6 ( Ra) Min. radius of Work piece (convex/concave) Rmin 50mm (with support ring Rmin 10mm) Min. work piece weight 2 5kg on stable support 0.05 2kg with compact coupling Min. Work piece thickness with coupling 5mm Min. Thickness of hardened layers 0.8mm Indentation depth See table in page 8 Continuous working time 150 h (without backlight) Power AAA 1.5V batteries (2pcs) Operating temperature 0 40 Dimensions 155mm Weight 166 g 55mm 25mm 3 Main unit Test block Brush Battery AAA 1.5V Connecting cable TIME certificate Instruction manual Warranty card Optional accessories Support rings (See page 9) 1 1 1 2 1 1 1 1
LEEB HARDNESS TESTER TH160 Features: Large LCD with back-light, showing all functions and parameters On-Board memory holds 240-1000 groups of data Automatic identification Impact Devices and test direction (Except G impact device) Time and date setting; auto-clock Integrated thermal printer, print all test results and histogram Li Battery , low voltage indication and sound alarm Upper / lower limits setting and sound alarm Software to connect with PC Direct display of hardness scales HRB, HRC, HRA, HV, HB, HS, HL Conversion to tensile strength (U.T.S.) for all metallic materials Wide measuring range Six Impact Devices are available for special applications Technical Specification Hardness scale HL, HRC, HRB, HRA, HV, HB, HS Memory 240-1000 groups (Impact times: 32-1) Measuring range Tolerance Standard Delivery Main unit with removable printer 1 See table in page 7 Impact device type D 1 Tensile strength U.T.S. range 374 2652 MPa Test block HLD 1 Statistics function Average / Max / Min value calculation, limits setting and alarm Charger 1 Brush 1 Connecting cable 1 Standard Impact Device D Optional Impact Devices DC/DL/C/D 15/G (See page 8) Min. Radius of Workpiece (convex/concave) Rmin 50mm (with support ring Rmin 10mm) Max. Workpiece Hardness 1 Instruction manual 1 Warranty card 1 Optional Accessory Min. Workpiece weight Min. Workpiece thickness TIME certificate Printing paper See table in page 8 Special Impact Devices Min. thickness of (See page 8) hardened surface Support rings (See page 9) Power Rechargeable Li Battery Continuous Working time About 100h (without printing and backlight) Charging time 2.5 4 hours Operating temperature 0 40 Humidity 90% Overall dimensions 230 Weight 420g (including Impact Device and printer) 90 Dataview software 46.5mm 4 Dataview for TH160
LEEB HARDNESS TESTER TH140 Features: Large LCD with backlight, showing all functions and parameters On-Board memory holds 48-350 groups of data Software to connect with PC Upper and lower limit and sound alarm Press HELP key can obtain operating tips in any displaying interface Direct display of hardness scales HRB, HRC, HRA, HV, HB, HS,HL Conversion to tensile strength (U.T.S) For all metallic materials Test at any angle, even upside down Removable printer included Wide measuring range Six Impact Devices are available for special application Battery indication and sound alarm Technical Specification Hardness scale HL, HRC, HRB, HRA, HV, HB, HS Memory 48-350 group (Impact times:32-1) Measuring range Tolerance Standard Delivery See table in page 7 Tensile strength U.T.S. range 374 2652 MPa Standard Impact Device D Optional Impact Devices DC/D 15/G/C/DL (See page 8) Min. Radius of Workpiece (convex/concave) Rmin 50mm (with special support ring Rmin 10mm) Max. Workpiece Hardness Optional Accessory Min. Workpiece weight Min. Workpiece thickness Main unit 1 Impact device type D 1 Test block HLD 1 Charger 1 Brush 1 Table support for main unit 1 Connecting cable 1 TIME certificate 1 Instruction manual 1 Warranty card 1 See table in page 8 Min. thickness of hardened layers 1.2V 600mAh Power Rechargeable NiMH Battery, 5 Continuous Working time About 50h, (without printing and backlight) Charging time 2 3.5 hours Operating temperature 0 40 Humidity 90% Overall dimensions 268 Weight 530 g (including Impact Device and printer) 86 Printing paper Special Impact Devices (See page 8) Support rings (See page 9) Dataview software 50mm 5 Dataview for TH140
LEEB HARDNESS TESTER HLN-11A Features: Wide measuring range, for all metallic materials Direct display of hardness scales HRB, HRC, HV, HB,HS, HL Conversion to tensile strength (U.T.S.) Test at any angle, even upside down Removable printer included Six Impact Devices are available for special applications Large LCD display showing all functions and parameters Battery low indication Power charging indication on the keyboard by LED Fault indication in details (E1-E5) Technical Specification Hardness scales Measuring range Tolerance HL, HRC, HRB, HV, HB, HS Standard Delivery See table in page 7 Main unit 1 374 1999 MPa Impact Device type D 1 Standard impact Device D Test block HLD 1 Optional Impact Devices DC/D 15/G/C/DL (See page 8) Charger 1 Min. Radius of workpiece (convex / concave) Rmin 50mm (with support ring Rmin 10mm) Brush 1 Tensile strength U.T.S range Table support for main unit 1 Max. Workpiece Hardness Min. workpiece weight Min. Workpiece thickness See table in page 8 TIME certificate 1 Instruction manual 1 Warranty card 1 Optional Accessory Min. Thickness of hardened layers Printing paper Power Rechargeable NiMH batteries 5 Charging time 3 hours (See page 8) Continuous working time About 50h (without printing and backlight) Support rings (See page 9) Operating temperature 0 40 Humidity 90% Dimensions 268 Weight 615g (including impact device and printer) 86 1.2V 600mAh 50mm 6 Special Impact Devices
LEEB HARDNESS TESTER Table 1: measuring range of TIME Leeb hardness tester Material Hardness scale Impace device 17.9 HRC D 15 D/DC 68.5 19.3 C 67.9 20.0 E G 22.4 69.5 47.7 99.9 HRB 59.6 99.6 HRA 59.1 85.8 HB 127 651 80 638 80 683 HV 83 976 80 937 80 996 HS 32.2 99.5 HB 143 650 HRC 20.4 67.1 HV 80 HRB 46.5 HB 85 655 HV 85 802 93 334 92 326 131 387 127 364 HB 19 164 32 168 HRB 23.8 HB 40 HRB 13.5 BRONZE HB 60 290 COPPER HB 45 315 Steel and cast steel Steel CWT, ST Stainless steel 61.7 646 20.6 68.2 37.0 99.9 88.0 83 663 81 646 84 1042 80 950 33.3 99.3 31.8 102.1 35.8 102.6 19.8 68.2 20.7 68.2 22.6 70.2 935 100 941 82 80 898 90 DL 70.7 30.6 96.8 1009 101.7 HRC GC,IRON HB HV HRC NC,IRON HB HV C,ALUM BRASS 23 22.7 84.6 210 85.0 23.8 85.5 173 95.3 Table 2: Tolerance and repeatability No. Impact device 1 D 2 DC 3 DL 4 D 15 5 G 6 C Standard test block values 760 30HLD 530 40HLD 760 30HLDC 530 40HLDC 878 30HLDL 736 40HLDL 766 30HLD 15 544 40HLD 15 590 40HLG 500 40HLG 822 30HLC 590 40HLC 7 Tolerance Repeatability 6HLD 10HLD 6HLDC 10HLDC 6HLD 10HLD 6HLDC 10HLDC 12HLDL 12HLDL 12HLD 15 12HLD 15 12HLG 12HLG 12HLC 12HLC
LEEB HARDNESS TESTER Technical specification of impact devices D DC DL C D 15 G Technical specification Impact device Impacting energy Mass of impact body Hardness of spherical test tip D/DC/DL D 15 C G 90mJ 11mJ 11mJ 2.7mJ 5.5g/5.5g/7.2g 7.8g 3.0g 20g 1600HV 1600HV 1600HV 1600HV Diameter of spherical test tip 3mm 3mm 3mm 5mm Material of spherical test tip Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide Diameter of impact device Length of impact device Weight of impact device Max. hardness of workpiece Surface roughness of workpiece 20/20/6mm 20mm 20mm 30mm 147/86/202mm 162mm 141mm 255mm 75/50/60g 80g 75g 250g 940/940/950HV 940HV 1000HV 650HV 1.6 1.6 0.4 6.3 Min. weight of workpiece Direct measurement 5kg 5kg 1.5kg 15kg Needing stable support 2 5kg 2 5kg 0.5 1.5kg 5 15kg Needing compact coupling 0.05 2kg 0.05 2kg 0.02 0.5kg 0.5 5kg Min. thickness of workpiece with compact coupling 5mm 5mm 1mm 10mm Min. thickness of hardened layer 0.8mm 0.8mm 0.2mm 1.2mm Size of impact indentation Hardness Indentation diameter 0.54mm 0.54mm 0.38mm 1.03mm 300HV Indentation depth Hardness 600HV Indentation diameter Hardness 800HV Indentation diameter Indentation depth Indentation depth Application guide of impact devices 24 0.54mm 17 0.35mm 24 0.54mm 17 0.35mm 12 53 0.32mm 0.90mm 8 41 0.35mm - 10 10 7 D type for general purpose, DC type for inner face of holes or D 15 type for grooves C type for small or light workpieces and surface small spaces, DL type for long or concave hardener layer and narrow channel or holes 8 G type for big and heavy workpieces with rough surface
LEEB HARDNESS TESTER Optional Support Rings Function: they are used for tested surface whose curvature radius is less than 30mm (D, DC, D 15, C impact devices) or less than 50mm (G impact device). UN Z K HZ HK Support Rings No. Type 1 Z10-15 For testing cylindrical outside surface R10 R15 2 Z14.5-30 For testing cylindrical outside surface R14.5 R30 3 Z25-50 For testing cylindrical outside surface R25 R50 4 HZ11-13 For testing cylindrical inside surface R11 R13 5 HZ12.5-17 For testing cylindrical inside surface R12.5 R17 6 HZ16.5-30 For testing cylindrical inside surface R16.5 R30 7 K10-15 For testing spherical outside surface SR10 SR15 8 K14.5-30 For testing spherical outside surface SR14.5 SR30 9 HK11-13 For testing spherical inside surface SR11 SR13 10 HK12.5-17 For testing spherical inside surface SR12.5 SR17 11 HK16.5-30 For testing spherical inside surface SR16.5 SR30 12 UN Sketch of non-conventional supporting ring Remarks For testing cylindrical outside surface, radius adjustable R10 9
hrc hrb hra hb hv hs hb hrc hv hrb hb hv hrc hb hv hrc hb hv hb hrb hb hrb hb hb d/dc 17.9 68.5 59.6 99.6 59.1 85.8 127 651 83 976 32.2 99.5 143 650 20.4 67.1 80 898 46.5 101.7 85 655 85 802 93 334 131 387 19 164 23.8 84.6 40 173 13.5 95.3 60 290 45 315 impace device d 15 19.3 67.9 80 638 80 937 33.3 99.3 19.8 68.2 80 935 c 20.0 69.5 80 683 80 .
A Leeb’s Hardness Tester measures the hardness of sample material in terms of Hardness Leeb (HL), which can be converted into other Hardness units (Rockwell B and C, Vicker, Brinell and Shore D). 1.3. Notation of Leeb’s Hardness When measuring the hardness of a sample materi
inspection qualified Leeb hardness tester and corresponding hardness tester to test at the same sample respectively. For each hardness value, each measure homogeneously 5 points of Leeb hardness value in the surrounding of more than three indentations which need conversion hardness, using
Mobile Leeb Hardness Tester . Thank you for buying a digital SAUTER Shore hardness tester. We hope you are . When you set the conversion from hardness scale to tensile strength or from tensile strength to hardness scale, you must reset material group. Conversion value
Leeb Hardness Tester LH320 User Manual Shandong iPRE Inspection Technology Ltd. 2 Preface Dear users: Thank you for your purchase of our Leeb Hardness Tester of LH320 Series (it is called Hardness Tester below), the Hardness Tester is portable device, and it is eq
DHT-100 Hardness Tester 1 1. Summary DHT-100 Leeb hardness tester, based on the principle of Leeb theory, can be used for hardness testing of various metals. With the feature of compact size, it is suitable for working on various circumstances. The Leeb hardness values can be easily converted to HRC, HRB,
- If an accurate conversion from the Leeb hardness value to another hardness value is requested, a contrastive test material. An inspected qualified Leeb hardness tester and a corresponding hardness tester have to be used to test at each homogeneous measurement, 5 points of Leeb which need
This standard covers hardness conversions for metals and the relationship among Brinell hardness, Vick-ers hardness, Rockwell hardness, Superficial hardness, Knoop hardness, Scleroscope hardness and Leeb hardness. ASTM E10 (Brinell) This standard covers the Brinell test method as used by stationary, typically bench-top machines. This
The hardness blocks used should be standard Leeb hardness blocks. Each hardness block should be tested 5 times. If the mean value deviates too much from the hardness value (HLD, Leeb) specified on the test block, you must calibrate the gauge by using the calibration function in the menu. 10 Getting started 10.1 Assembly Attach the test cable to .
