Te Hert Corortion
The Hertz Corporation Hertz LAX ConRAC Los Angeles, California Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. LAX ConRAC Project Number: 190785 Los Angeles, California Issued for Bids 05/11/2022 The Hertz Corporation DESIGN INTENT: FIXTURE DETAILS REVISIONS 5/11/2022 ISSUE LINE Drawn By NSL Designer NSL Reviewer AM Manager AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. 190785 PAGE NO. 1 Copyright 2021 All Rights Reserved
TABLE OF CONTENTS 11 12 13 14 15 RETURN SIGNAGE SCRP-e SHARED CONRAC PYLON SIGN S1018-e RETURN OVERHEAD SIGN - 10’ X 18” SRESM HERTZ TROLLEY SIGN HLSS-e LOT SIGN SYSTEM SLSS-e LOT SIGN SYSTEM TDD-e THRIFTY DIGITAL DIRECTORY DDD-e DOLLAR DIGITAL DIRECTORY HMM74 MOBILE MONUMENT - 74” HEIGHT 16 17 18 19 20 21 25 29 BOOTH SIGNAGE HEL1-e HERTZ LOYALTY BOOTH FASCIA HMMP HERTZ MOBILE PODIUM - GRAPHIC ONLY SABCS DOLLAR/THRIFTY CUSTOMER SERVICE BOOTH SMMP SHARED MOBILE PODIUM - GRAPHIC ONLY SABCS HERTZ/DOLLAR/THRIFTY RETURNS CUSTOMER SERVICE SIGN HABE-e HERTZ EXIT BOOTH FASCIA SABE-e HERTZ/DOLLAR/THRIFTY EXIT BOOTH FASCIA 30 31 32 33 34 35 37 EXIT SIGNAGE HEO-e HERTZ EXIT OVERHEAD - LANE SIGN SEO-e HERTZ/DOLLAR/THRIFTY EXIT OVERHEAD - LANE SIGN SEXB-e EXIT BOOTH V-SIGN H15S HERTZ/DOLLAR/THRIFTY GATE ARM COVER H15H HERTZ GATE ARM COVER 39 40 41 42 43 BACKWALL SIGNAGE HL-e HERTZ SIDEWALL LOGO SWS1-e DOLLAR/THRIFTY BACKWALL LOGO HGWG HERTZ GARAGE WALL GRAPHIC SGWG DOLLAR/THRIFTY GARAGE WALL GRAPHIC FINISHES LAX ConRAC OVERHEAD WAYFINDING SIGNAGE HV618-e HERTZ VEHICULAR OVERHEAD WAYFINDING - 6’ X 18” HP618-e HERTZ PEDESTRIAN OVERHEAD WAYFINDING - 6’ X 18” SV618-e SHARED VEHICULAR OVERHEAD WAYFINDING - 6’ X 18” SP618-e SHARED PEDESTRIAN OVERHEAD WAYFINDING - 6’ X 18” SZ618-e SHARED ZONE/STALL SIGNAGE - 6’ X 18” Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. Los Angeles, California 3 4 5 6 7 8 9 10 The Hertz Corporation ZONE SIGNAGE HZ2L-e HERTZ 24” ZONE START - LEFT HZ2R-e HERTZ 24” ZONE START - RIGHT HZ2I-e HERTZ 24” ZONE INTERMEDIATE SIGN HQRD-e HERTZ RESERVED SIGN - DOUBLE STALL - SINGLE SIDED HQRDD-e HERTZ RESERVED SIGN - DOUBLE STALL - DOUBLE SIDED HQRSD-e HERTZ RESERVED SIGN - SINGLE STALL - DOUBLE SIDED HQRAL-e HERTZ ZONE START RESERVED SIGN - ONE ADD-ON - LEFT HQRAR-e HERTZ ZONE START RESERVED SIGN - ONE ADD-ON - RIGHT REVISIONS 5/11/2022 ISSUE LINE Drawn By NSL 44 45 46 47 48 Designer NSL Reviewer AM Manager AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. 190785 PAGE NO. 2 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) ALIGN FRONT FACES PC4 Secure end of light bar as required PC1 V1-T 4” x 4” Extruded LED light bar with clip-in translucent face. Body of light bar nished in yellow, lit face on light bar to match approved color vinyl PC5 Metal sign box to be black LT11 Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. 3/16” thick changeable LED back-lit faces on sign boxes 155-3/4" Scale: NTS Plan view Scale: 1/2" 1'-0" LAX ConRAC 1 View Los Angeles, California 21" 3 The Hertz Corporation 4" 155-3/4" 97-3/4" 58" 46" 4" 1 2 Front Elev Scale: 1/2" 1'-0" 24" 12 20" 4" REVISIONS 5/11/2022 ISSUE LINE Drawn By NSL Designer NSL Reviewer AM Manager AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 190785 PART NO. HZ2L-e PAGE NO. 3 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) PC4 Secure end of light bar as required PC5 ALIGN FRONT FACES Metal sign box to be black LT11 3/16” thick changeable LED back-lit faces on sign boxes. PC1 V1-T 4” x 4” Extruded LED light bar with clip-in translucent face. Body of light bar nished in yellow, lit face on light bar to match approved color vinyl 3 View Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. Scale: NTS 155-3/4" Plan view Scale: 1/2" 1'-0" 155-3/4" 58" LAX ConRAC 1 Los Angeles, California 21" The Hertz Corporation 4" 97-3/4" 46" 20" 1 12 4" 24" 4" REVISIONS 5/11/2022 ISSUE LINE Drawn By NSL 2 Front Elev Scale: 1/2" 1'-0" Designer NSL Reviewer AM Manager AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 190785 PART NO. HZ2R-e PAGE NO. 4 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) FLIP Light bar mounted on center to the top of Z2I intermediate sign box ALIGN FRONT FACES LT11 3/16” thick changeable LED back-lit faces on sign boxes. PC5 Metal sign box to be black Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. 30" 1 Plan view Scale: 3/4" 1'-0" Every Z2I sign includes ZB1 mounted to the top, centered LAX ConRAC See page Z12.2 for mounting examples. Los Angeles, California 4" 15" Same unit for Intermediate. Constructed symmetrical top-to-bottom so it can flip and be used as left or right handed. The Hertz Corporation 4" 15" 30" 20" 24" 20" 24" REVISIONS 5/11/2022 ISSUE LINE Drawn By NSL Designer NSL Reviewer AM Manager 2 Front elevation Scale: 3/4" 1'-0" NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 3 Right elevation Scale: 3/4" 1'-0" AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. 190785 PART NO. HZ2I-e PAGE NO. 5 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) Ceiling mounted hardware to have a set screw to aid in alignment vertically and horizontally PC4 Telescoping mounting hardware by vendor PC4 Light bar with reserved sign blade mounted to bottom PC1 V1-T Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. View V4-O Scale: NTS Fin is brake-formed metal sheet w applied sign faces Vendor to specify gauge and type of metal Varies by location Varies by location 108" LAX ConRAC 1 PC5 Los Angeles, California Sign n secured to underside of light bar with integrated LED for face lighting. White vinyl lettering on painted black fin. The Hertz Corporation LED to be mechanically fastened under edge with LT12 screw and/or Z-clip for face lighting sign blade Vendor to specify profile for best lighting coverage Telescoping mounting hardware by vendor painted to match white. PC4 REVISIONS 9" 9" 4" 4" Mount to align all yellow zone bars with zone bars in the same lot C/L 5/11/2022 ISSUE LINE Drawn By NSL Designer 2 Front elevation Scale: 1/2" 1'-0" 3 Side elevation Scale: 1/2" 1'-0" NSL Reviewer AM Manager AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 190785 PART NO. HQRD-e PAGE NO. 6 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) Ceiling mounted hardware to have a set screw to aid in alignment vertically and horizontally PC4 Telescoping mounting hardware by vendor PC4 Light bar with reserved sign blade mounted to bottom PC1 V1-T Additional LED in extruded or formed channel installed to face light back side of n in double sided applications LT12 Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. View V4-O Scale: NTS Fin is brake-formed metal sheet w applied sign faces Vendor to specify gauge and type of metal Varies by location Varies by location 108" LAX ConRAC 1 PC5 Los Angeles, California Sign n secured to underside of light bar with integrated LED for face lighting. White vinyl lettering on painted black fin The Hertz Corporation LED to be mechanically fastened under edge with LT12 screw and/or Z-clip for face lighting sign blade Vendor to specify profile for best lighting coverage Telescoping mounting hardware by vendor painted to match white. PC4 REVISIONS 9" 9" 4" 4" Mount to align all u/s yellow zone bars with zone bars in the same lot C/L 5/11/2022 ISSUE LINE Drawn By NSL Designer 2 Front elevation Scale: 1/2" 1'-0" 3 Side elevation Scale: 1/2" 1'-0" NSL Reviewer AM Manager AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 190785 PART NO. HQRDD-e PAGE NO. 7 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) Ceiling mounted hardware to have a set screw to aid in alignment vertically and horizontally PC4 Telescoping mounting hardware by vendor PC4 PC5 1 LED to be mechanically fastened under edge with LT12 screw and/or Z-clip for face lighting sign blade Vendor to specify profile for best lighting coverage V4-O Fin is brake-formed metal sheet w applied sign faces Vendor to specify gauge and type of metal View Scale: NTS Telescoping mounting hardware by vendor painted to match white. PC4 REVISIONS Mount to align all yellow zone bars with zone bars in the same lot 9" 4" 3/8"11/64" Varies by location Varies by location 54" Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. LAX ConRAC Sign n secured to underside of light bar with integrated LED for face lighting. White vinyl lettering on painted black fin. Los Angeles, California V1-T LT12 The Hertz Corporation Light bar with reserved PC1 sign blade mounted to bottom Additional LED in extruded or formed channel installed to face light back side of n in double sided applications 5" 5/11/2022 ISSUE LINE Drawn By NSL Designer 2 Front elevation Scale: 1/2" 1'-0" 3 Side elevation Scale: 1/2" 1'-0" NSL Reviewer AM Manager AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 190785 PART NO. HQRSD-e PAGE NO. 8 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. Scale: NTS Los Angeles, California 1 View of HZ2L with add-on Scale: NTS 97-3/4" 4 2" 91-1/4" 4-1/2" LAX ConRAC Alignment over stalls The Hertz Corporation 3 View of Add-on only Scale: NTS 9" REVISIONS 2 Front elevation Scale: 3/4" 1'-0" Overlap angled end behind light bar NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. LED to be mechanically fastened under edge with screw and/or Z-clip for face lighting sign blade Vendor to specify profile for best lighting coverage Fin is brake-formed metal sheet w applied sign faces Vendor to specify gauge and type of metal LT12 5/11/2022 ISSUE LINE Drawn By NSL Designer NSL Reviewer AM Manager AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. 190785 PART NO. HQRAL-e PAGE NO. 9 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. Scale: NTS Los Angeles, California View of HZ2R with add-on 1 Scale: NTS LAX ConRAC Alignment over spaces The Hertz Corporation 3 97-3/4" 2" 4-1/2" 4 91-1/4" View of Add-on only Scale: NTS 9" REVISIONS Overlap angled end behind light bar 2 Front elevation Scale: 3/4" 1'-0" LED to be mechanically fastened under edge with screw and/or Z-clip for face lighting sign blade Vendor to specify profile for best lighting coverage 5/11/2022 LT12 ISSUE LINE Drawn By NSL Designer NSL Reviewer AM Manager AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. Fin is brake-formed metal sheet w applied sign faces Vendor to specify gauge and type of metal 190785 PART NO. HQRAR-e PAGE NO. 10 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) 2” Square tube metal support structure Telescoping mounting PC5 hardware by vendor LED driver mounted between LED strips (See exploded view) PC5 LED strip lighting on both sides 18" 1/2”x2” Tube frame 1/2”x2” Tube frame Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. 3/16” Thick LED back lit sign face LT11 Scale: NTS 1/2" 75-1/4" 3 72" Section view Scale: 1 1/2” 1’-0” 60" #6 Attachment screws up thru top & bottom of bezel into metal T frame. Paint heads to match sign box. LAX ConRAC Perspective view 2" 1 Aluminum ’T’ frame inside to fasten bezel and LED Los Angeles, California Sign bezel to be nished in PC5 black The Hertz Corporation 3/16” THK acrylic face w/ vinyl graphic applied as per graphic le VARIES 3 18" 21-3/4" REVISIONS GRAPHIC AREA: 72” W x 18”H C/L 5/11/2022 ISSUE LINE Drawn By NSL 2 Designer Front elevation NSL Reviewer AM Manager Scale: 3/4” 1’-0” AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 4 Exploded view Scale: NTS 190785 PART NO. HV618-e PAGE NO. 11 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) 2” Square tube metal support structure Telescoping mounting PC5 hardware by vendor LED driver mounted between LED strips (See exploded view) PC5 LED strip lighting on both sides 18" 1/2”x2” Tube frame 1/2”x2” Tube frame Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. 3/16” Thick LED back lit sign face LT11 Scale: NTS 1/2" 75-1/4" 3 72" Section view Scale: 1 1/2” 1’-0” 60" #6 Attachment screws up thru top & bottom of bezel into metal T frame. Paint heads to match sign box. LAX ConRAC Perspective view 2" 1 Aluminum ’T’ frame inside to fasten bezel and LED Los Angeles, California Sign bezel to be nished in PC5 black The Hertz Corporation 3/16” THK acrylic face w/ vinyl graphic applied as per graphic le VARIES 3 18" 21-3/4" REVISIONS GRAPHIC AREA: 72” W x 18”H C/L 5/11/2022 ISSUE LINE Drawn By NSL 2 Designer Front elevation NSL Reviewer AM Manager Scale: 3/4” 1’-0” AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 4 Exploded view Scale: NTS 190785 PART NO. HP618-e PAGE NO. 12 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) 2” Square tube metal support structure Telescoping mounting PC5 hardware by vendor LED driver mounted between LED strips (See exploded view) PC4 LED strip lighting on both sides 18" 1/2”x2” Tube frame 1/2”x2” Tube frame Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. 3/16” Thick LED back lit sign face LT11 Scale: NTS 1/2" 75-1/4" 3 72" Section view Scale: 1 1/2” 1’-0” 60" #6 Attachment screws up thru top & bottom of bezel into metal T frame. Paint heads to match sign box. LAX ConRAC 2" 1 Perspective view Los Angeles, California Aluminum ’T’ frame inside to fasten bezel and LED Sign bezel to be finished in white PC4 The Hertz Corporation 3/16” THK acrylic face w/ vinyl graphic applied as per graphic le VARIES 3 18" 21-3/4" REVISIONS GRAPHIC AREA: 72” W x 18”H C/L 5/11/2022 ISSUE LINE Drawn By NSL 2 Designer Front elevation NSL Reviewer AM Manager Scale: 3/4” 1’-0” AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 4 Exploded view Scale: NTS 190785 PART NO. SV618-e PAGE NO. 13 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) 2” Square tube metal support structure Telescoping mounting PC5 hardware by vendor LED driver mounted between LED strips (See exploded view) PC4 LED strip lighting on both sides 18" 1/2”x2” Tube frame 1/2”x2” Tube frame Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. 3/16” Thick LED back lit sign face LT11 Scale: NTS 1/2" 75-1/4" 3 72" Section view Scale: 1 1/2” 1’-0” 60" #6 Attachment screws up thru top & bottom of bezel into metal T frame. Paint heads to match sign box. LAX ConRAC 2" 1 Perspective view Los Angeles, California Aluminum ’T’ frame inside to fasten bezel and LED Sign bezel to be finished in white PC4 The Hertz Corporation 3/16” THK acrylic face w/ vinyl graphic applied as per graphic le VARIES 3 18" 21-3/4" REVISIONS GRAPHIC AREA: 72” W x 18”H C/L 5/11/2022 ISSUE LINE Drawn By NSL 2 Designer Front elevation NSL Reviewer AM Manager Scale: 3/4” 1’-0” AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 4 Exploded view Scale: NTS 190785 PART NO. SP618-e PAGE NO. 14 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) 2” Square tube metal support structure Telescoping mounting PC5 hardware by vendor LED driver mounted between LED strips (See exploded view) PC4 LED strip lighting on both sides 18" 1/2”x2” Tube frame 1/2”x2” Tube frame Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. 3/16” Thick LED back lit sign face LT11 Scale: NTS 1/2" 75-1/4" 3 72" Section view Scale: 1 1/2” 1’-0” 60" #6 Attachment screws up thru top & bottom of bezel into metal T frame. Paint heads to match sign box. LAX ConRAC 2" 1 Perspective view Los Angeles, California Aluminum ’T’ frame inside to fasten bezel and LED Sign bezel to be finished in white PC4 The Hertz Corporation 3/16” THK acrylic face w/ vinyl graphic applied as per graphic le VARIES 3 18" 21-3/4" REVISIONS GRAPHIC AREA: 72” W x 18”H C/L 5/11/2022 ISSUE LINE Drawn By NSL 2 Designer Front elevation NSL Reviewer AM Manager Scale: 3/4” 1’-0” AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 4 Exploded view Scale: NTS 190785 PART NO. SZ618-e PAGE NO. 15 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) Reference,: Typical ht of jersey barrier (32”) 6'-0" 2'-6" 1'-0" 1" Upper section of box: Brand identity Lower Section of box: Return graphic V5-O 4.25” height black opaque vinyl applied to surface return entrance sign base. PC4 1 Perspective view 1 Vendor to provide base plate and hardware adequate for site conditions New or existing concrete pad as speci ed by site architect or engineer Scale: NTS 2 Front elevation Scale: 1/4” 1'-0" 3 Side elevation Scale: 1/4” 1'-0" Los Angeles, California Reveals between section to be painted 3'-10" PC4 LAX ConRAC No Personal Vehicles V5-T V3-T The Hertz Corporation V4-T V2-T 7'-11" with internal framing as required LT11 for wind loads. Back-lit faces on approach side only. Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. 4'-0" PC4 Double sided internally lit sign box V1-T Back faces to be solid and unlit. 1'-0" REVISIONS 5/11/2022 ISSUE LINE Drawn By NSL Designer NSL Reviewer AM Manager AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 190785 PART NO. SCRP-e PAGE NO. 16 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) 2” Square tube metal support structure Telescoping mounting hardware by vendor 1/2”x2” Tube frame PC4 LED strip lighting on both sides PC4 LED driver mounted between LED strips (See exploded view) Sign bezel to be nished in white PC4 2" 1 #6 Attachment screws up thru top & bottom of bezel into metal T frame. Paint heads to match sign box. Perspective view Scale: NTS 123-1/4" 3 120" 1/2" Section view Scale: 1 1/2” 1’-0” 108" Sign bezel to be finished in white. PC4 Los Angeles, California Aluminum ’T’ frame inside to fasten bezel and LED LAX ConRAC 3/16” THK acrylic face w/ vinyl graphic applied as per graphic le The Hertz Corporation 3/16” thick LED back LT11 lit sign face 18" 1/2”x2” Tube frame Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. VARIES 3 18" 21-3/4" REVISIONS GRAPHIC AREA: 120” W x 18”H 5/11/2022 C/L 2 ISSUE LINE Drawn By NSL Designer Front elevation NSL Reviewer AM Manager Scale: 3/4” 1’-0” AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 4 Exploded view Scale: NTS 190785 PART NO. S1018-e PAGE NO. 17 Copyright 2021 All Rights Reserved
Removable hanger rod to allow change out of graphic panel Hanging sign panel with identities applied in vinyl PC4 V2-O V3-O J-Track to hold changeable lower sign Changeable lower graphic panel slides into j-track. Ensure a snug t within track PC4 Scale: NTS The Hertz Corporation Heavy duty zinc steel adjustale leveling mount, 4”L thead/5”OAH, 1/2”-13 threaded stud. Perspective view 1 Swivel caster wheels at one end Fixed (locking) caster wheels at the other end Los Angeles, California 1 Metal frame with THK wall gauge, welded at joints with welded gussets for reenforcement. 5'-0" 2'-5 1/2" 4'-8" 2" NSOP QTY 15 REVISIONS C/L 4" 6" 2" 2'-11" 3'-3" 1'-0" 2'-0" 2'-9" 3'-3" 5'-4" LAX ConRAC Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PC4 V5-O 5/11/2022 ISSUE LINE Drawn By NSL Designer NSL Reviewer AM Manager 2 Front elevation Scale: 3/4” 1'-0" NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 3 Right elevation Scale: 3/4” 1'-0" AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. 190785 PART NO. SRESM PAGE NO. 18 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) 26" 24" 24" 2" 26" 2 Scale: 1/2” 1'-0" LED backlit panel with vinyl graphics applied. V4-T Metal sign post with ground bracket 24" PC5 24" Metal ller panel (may have graphic applied over top) 78" 24" PC5 LAX ConRAC 24" Los Angeles, California V2-T Plan view The Hertz Corporation V5-T Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. New or existing concrete pad as specified by site architect or engineer. 54" REVISIONS Run BX up into sign thru frame for power 1 Perspective view 1 Scale: NTS PC5 Aluminum base plate - exact size and thickness TBD based on site conditions, mounted to parking garage decking with necessary hardware, painted black. 5/11/2022 ISSUE LINE Drawn By NSL Designer NSL Reviewer AM Manager AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 3 Front elevation Scale: 1/2” 1'-0" 190785 PART NO. HLSS-e PAGE NO. 19 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) 26" 24" 24" 2" 26" 2 Scale: 1/2” 1'-0" LED backlit panel with vinyl graphics applied. V4-T Metal sign post with ground bracket 24" PC4 24" Metal ller panel (may have graphic applied over top) 78" 24" PC4 LAX ConRAC 24" Los Angeles, California V2-T Plan view The Hertz Corporation V5-T Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. New or existing concrete pad as specified by site architect or engineer. 54" REVISIONS Run BX up into sign thru frame for power 1 Perspective view 1 Scale: NTS PC4 Aluminum base plate - exact size and thickness TBD based on site conditions, mounted to parking garage decking with necessary hardware, painted black. 5/11/2022 ISSUE LINE Drawn By NSL Designer NSL Reviewer AM Manager AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 3 Front elevation Scale: 1/2” 1'-0" 190785 PART NO. SLSS-e PAGE NO. 20 Copyright 2021 All Rights Reserved
THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) Removable top cap to allow faces and sides to lift out of tracks PC3 Metal frame Rear panel, metal or acrylic (vendor to spec) with ventilation provided and white vinyl graphic applied to rst surface as per graphic le Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. Front panel, clear acrylic w/ vinyl mask applied to second surface. Clear portion left in front of monitor (monitor inside) Los Angeles, California PC8 Curved 1/4” translucent acrylic with perforated vinyl applied to rst surface The Hertz Corporation V6-O Removable top panels on base assembly, provide nger holes to pull top up, silver metallic nish on outer face LAX ConRAC PC3 1/4” THK steel plate vertical kick faces, brushed nish REVISIONS Base to be anchored to oor when power is connected 1 Rear perspective view Scale: NTS 2 Front perspective view Scale: NTS 5/11/2022 ISSUE LINE Drawn By NSL Designer NSL Reviewer AM Manager AM Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. PROJECT NO. NOTES: : 1. All artwork shown is FPO - Refer to supplied art files for final vector art. 2. Refer to KP drawings for use and placement. 190785 PART NO. TDD-e PAGE NO. 21 Copyright 2021 All Rights Reserved
36" THIS FIXTURE REQUIRES POWER SIGN VENDOR RESPONSIBLE FOR PROVIDING A DISCONNECT IN ACCORDANCE WITH NEC 600.6(A)(2) 6" 32" R 3” Removable top panels on base assembly, provide nger holes to pull top up, silver metallic on outer face C/L 1 Hard copy is intended to be 11"x17" when plotted. Scale(s) indicated and graphic quality may not be accurate for any other size. Plan view Scale: 3/4” 1'-0" 27-3/4" ID 1 Preferred power connection location
hmm74 mobile monument - 74" height 29 booth signage hel1-e hertz loyalty booth fascia 30 hmmp hertz mobile podium - graphic only 31 sabcs dollar/thrifty customer service booth 32 smmp shared mobile podium - graphic only 33 sabcs hertz/dollar/thrifty returns customer service sign 34 habe-e hertz exit booth fascia 35 sabe-e hertz/dollar/thrifty .
BOOGIE BOARD SYNC. ̶Voordelen: ‒Goedkoop en eenvoudig ‒Tekst zichtbaar ‒Wetenschappelijke notaties ‒1 week op batterij ̶Te verbeteren: ‒E
Master 1 Parcours P1 « Communication des organisations» Rapport de stage Ville d’Aix-en-Provence « Communiquer dans une collectivité locale» Effectué du 06.03.06au 16.06.06 Au sein du service de Communication Interne Rédactionnelle Tuteur Université: M. Philippe HERT
Mercer County Cul & Hert Commission Local Arts Program 96,280 Trenton Mercer . Long Beach Island Fnd of the Arts & Science General Operating or Program Support 25,441 Loveladies Ocean . JCC on the Palisades-Thurnauer School of Music Ge
how rhyming words start with different letters or sounds, but end the same way. They will match up words that rhyme by matching halves of pairs of flip flops. Instructions 1. Select a half of a pair of flip flops. 2. Encourage the child to say what the picture is that they see. 3. Explain
Menyelenggarakan pendidikan akuntansi yang berkualitas dan berkelanjutan yang mudah diakses dan terjangkau oleh masyarakat luas sehingga mampu berperan aktif dalam mencerdaskan bangsa. 3. Melakukan kegiatan penelitian dan pengembangan ilmu ekonomi khususnya dalam bidang akuntansi dan bisnis yang efisien dan efektif sehingga menghasilkan lulusan bidang akuntansi yang kreatif, inovatif dan mampu .
Introduction Description logics (DLs) are a prominent family of logic-based formalisms for the representation of and reasoning about conceptual knowledge (Baader et al. 2003). In DLs, concepts are used to describe classes of individuals sharing common properties. For example, the following concept de-scribes the class of all parents with only happy children: Personu has-child.Personu has .
Automotive battery: module components Casing: Metal casing provides mechanical support to the cells and holds them under slight compression for best performance Clamping frame: Steel clamping frames secure the modules to the battery case Temperature sensors: Sensors in the modules monitor the cell temperatures to allow the battery management system to control cooling and power delivery within .
Storage Systems for Automotive Applications Wasim Sarwar1*, Timothy Engstrom1, Monica Marinescu1, Nick Green2, Nigel . As with PHEVs, in a large ESS the use of active thermal management (system consisting of heating and cooling loop) provides good value, therefore a large thermal operating window is not required. Further, a comparatively shorter cycle life is sufficient in order to meet the .
