BALL VALVE CATALOGUE - Fortvale.ru
BALL VALVE CATALOGUE // The Fort Vale Range of Ball Valves CATALOGUE REVISION 01-27.01.15 Fort Vale Engineering Ltd. 2015
THIS PAGE IS INTENTIONALLY BLANK
BALL VALVE CATALOGUE // CONTENTS // PAGE AIRLINE BALL VALVES // » 25mm PFA Lined Flanged Blacko Airline Ball Valve 1 » 1½” BSP Blacko Airline Ball Valve » 1½” Dual Fitting Blacko Airline Ball Valve » 1½” Flanged Blacko Airline Ball Valve 2 3 4 » 2” Blacko Ball Valve - Slotted Outlet (This valve may also be used as a discharge valve) » 2” Pneumatically Actuated Blacko Airline Ball Valve » Airline Valve Weld-in Flanges » Airline Valve Installation & Conversion Kits 5 6/7 8 9 DISCHARGE BALL VALVES // » 50mm PFA Lined Flanged Ball Valve 10 » 2” Blacko Ball Valve - Slotted Outlet (See Airline Section) » 2” Ball Valve - H2O2 Specification » 2” Blacko Ball Valve - Offshore Specification » 2” Full Bore Ball Valve - Gas Specification 5 11 12 14/15 » 80mm PFA Lined Flanged Ball Valve 16/17 » 3” Blacko Ball Valve - 3" BSP Outlet » 3” Blacko Ball Valve - Slotted Outlet 18/19 20/21 » 4" Ball Valve - Rail Specification 22/23 » Socket / In-Line Ball Valves 24 FIRESAFE & LETHAL SERVICE BALL VALVES // » » » » 1" Firesafe / Lethal Service Ball Valve 2" Firesafe / Lethal Service Ball Valve 2" Firesafe Only Ball Valve 3" Firesafe / Lethal Service Ball Valve Fort Vale Engineering Ltd. 2015 26/27 28/29 30/31 32/33 BALL CONTENTS REV01-27.01.15
Data PFA Lined 25mm Reduced Bore Flanged Airline Ball Valve PFA Lined 25mm Reduced Bore Flanged Airline Ball Valve - inlet flange drilled 4 x 18mm slots on a 100mm to 125mm PCD; outlet flange (tank connection) drilled 4 x 11mm holes on a 103.5mm PCD. Valve manufactured in stainless steel with PTFE main seal. All parts in contact with the cargo lined with PFA. Options - range of PFA lined ball valves (See RANGE) Fitting Details Specification Weight Design Pressure (MAWP) Test Pressure Design Temperature Range Part number : 530/P100 Ø 152.0 Ø 38.1 80.5 Ø 80.4 5.3 Kg 6.9 Bar (100 PSI) 10.3 Bar (150 PSI) -40 C to 200 C -40 F to 392 F 23.6 Valve complies with EN14432:2006 and RID norms. Ø 78.0 Ø 127.0 Range Ø 25.0 Description 530/P100 370/P100 360/P030X 25mm PFA lined reduced bore ball valve 50mm PFA lined full bore ball valve 80mm PFA lined full bore ball valve OUTLET 4 HOLES Ø 11.0 EQUI-SPACED ON A 103.5 PCD. Associated Parts 108.9 Part No. INLET 4 SLOTS Ø 18.0 EQUI-SPACED ON A 100 TO 125 PCD. 45 Part No. Associated Parts 350/0024 355/1250 530/8053CM 5005-348 311/3510 Tank weld-in pad Stud kit Blind flange Solid PTFE outlet gasket Bolting kit Parts drawing 1 2 3 4 5 6 7 8 9 Item Description Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 M5 socket screw Retaining washer Handle M6 button screw (4) Stuffing clamp Seal carrier for lining Perfluoroelastomer O ring Perfluoroelastomer O ring Fortyt O ring PFA lined body PFA lined ball & stem PFA lined clamp plate PTFE front & rear seal (2) 5111-111 20370/5 530/0020/1 5121-013 530/1014 530/1013 5005-586 5005-384 5005-601 530/P110 530/1010L 530/1011P 530/0024 10 11 12 13 Fort Vale Engineering Ltd. 2018 Page 1 BALL024 REV05-30.11.18
1½” Blacko Airline Ball Valve Data 1½” Airline Ball Valve - 1 ½” BSP male inlet. Complete with pressure gauge connection and TIR facility to handle. Contact parts manufactured in 316 stainless steel with PTFE seals. Options - gauge guard and/or gauze filter, ¼” BSP plug with TIR wire. Specification Fitting Details Part Number : 530/0000 59.7 Weight Design Pressure Test Pressure Design Temperature 2.9 Kg MAWP 10 Bar (145 PSIG) 21.4 Bar (310 PSIG) -55 C to 205 C (-67 F to 401 F) Approved to BS EN14432. 167.2 Ø 38.4 Ø 29.3 Range 11.9 86.9 Part No. 530/0000 530/0000F 530/0000G Ø 29.3 530/0000FG 96.8 (SQUARE) 73.2 (SQUARE) 530/0000W Description 1½” BSP inlet standard valve. 1½” BSP inlet valve with gauze. 1½” BSP inlet valve with gauge guard. 1½” BSP inlet valve with gauze and gauge guard. 1½” BSP inlet valve with ¼” BSP plug and TIR wire. Associated Parts ¼” BSP GAUGE CONNECTION 4 HOLES 10.8 THRO EQUI-SPACED AS SHOWN ON A 103.5 PCD Associated Parts Gauge Gauge Adaptor 1½” BSP Dust Cap Stud Kit Tank Pad Part No. 920/07BBSP 352/4004 10300PS 350/1300 350/0025 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Part No. 5112-031 5113-005 531/0025 5005-008 5120-017 353/0010 530/0100 530/0040 5005-048 5128-005 5005-006 350/0002 5005-007 530/0001 5003-002 530/0003 5113-036 Parts drawing 1 2 17 3 16 4 5 15 6 14 7 8 9 11 10 Description Self-locking nut M8 washer Handle PTFE O ring (2) Snap ring (optional suffix ‘F’) Gauze filter (optional suffix ‘F’) Valve body Gauge guard (optional suffix ‘G’) PTFE O ring ¼” BSP plug Front ball seal Ball Rear ball seal Spindle PTFE washer Stuffing boss (2) Disc spring 12 13 Repair Kits: Items marked are included in Repair Kit 530/00RK Seal Kits: Items marked are included in Seal Kit 530/00SK Fort Vale Engineering Ltd. 2020 Page 2 BALL002 REV08-19.02.20
1½” Dual Fitting Blacko Airline Ball Valve Data TM 1½” Dual Inlet Airline Ball Valve - 1½” BSP and 1½” NPT male inlet connections. Complete with pressure gauge connection and TIR facility to handle. Contact parts manufactured in 316 stainless steel with PTFE seals. Optional extras - gauge guard and/or gauze filter. Specification Fitting Details Part Number : 530/0300 Weight Design Pressure Test Pressure Design Temperature 73.1 (2.88") 5.25 Kg MAWP 10 Bar (145 PSIG) 21.4 Bar (310 PSIG) -55 C to 205 C (-67 F to 401 F) Approved to BS EN14432. 94.0 (3.70") 96.7 (3.81") 4 HOLES 10.7 DIA THRO 0.42" Range Type Gauze 1½”BSP-1½”NPT 1½”BSP-1½”NPT 1½”BSP-1½”NPT 1½”BSP-1½”NPT Without With With Without Gauge Guard Part No. Without Without With With 530/0300 530/0300F 530/0300FG 530/0300G 85.85 (3.38”) 167.4 (6.59") 139.7 (5.50") Associated Parts ¼" BSP GAUGE CONNECTION 124.97 (4.92”) Associated Parts Gauge Gauge Adaptor BSP Cap NPT Cap Stud Kit Tank Pad Part No. 920/07BBSP 352/4004 10300PS 10300PNT 350/1300 350/0025 Parts drawing Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 16 2 15 14 13 3 12 11 4 5 10 6 9 8 Description M8 washer Handle PTFE O ring (2) Valve body Gauge guard (optional suffix ‘G’) PTFE O ring ¼” BSP plug Rear ball seal Ball Gauze filter (optional suffix ‘F’) Front ball seal Spindle Stuffing boss (2) PTFE washer Disc spring Self-locking nut Part No. 5113-005 530/0020 5005-008 530/0301 530/0040 5005-048 5128-005 5005-007 350/0002 353/0010 5005-006 530/0001 530/0003 5003-002 5113-036 5112-031 7 Repair Kits: Items marked included in Repair Kit - 530/00RK Seal Kits: Items marked included in Seal Kit - 530/00SK Fort Vale Engineering Ltd. 2011 Page 3 BALL001 REV05-06.10.11
1½” Flanged Blacko Airline Ball Valve Data 1½” Flanged Airline Ball Valve - inlet flange slotted to 1½” BSTD/1½” ASA 150. Complete with pressure gauge connection, gauge guard and TIR facility to handle. Contact parts manufactured in 316 stainless steel with PTFE seals. Optional extra - gauze filter. Fitting Details Specification Weight Design Pressure (MAWP) Test Pressure Design Temperature Part Number : 530/1000 3.7 Kg 7 Bar (101 PSIG) 15 Bar (217 PSIG) -55 C to 205 C (-67 F to 401 F) 74.4 (2.93") Approved to BS EN14432. Range 1 " BSP GAUGE CONNECTION 4 167.4 (6.59”) 96.8 (3.81") 94.0 (3.70") 152.4 (6.00") DIA 73.1 (2.88") Inlet Flange Gauze TIR Gauge Guard Part No. 1½”BSTD/ASA 1½”BSTD/ASA Without With Standard Standard Standard Standard 530/1000 530/1000F Associated Parts Associated Parts Blind Flange Bolting Kit Gasket Stud Kit Tank Pad 4 HOLES 10.7 (0.42") 4 SLOTS 18.0mm DIA THRO' EQUI-SPACED ON 3.874" I/D PCD (98.4mm PC) ISO 9669 Part No. 530/8053CM 311/3500 5005-348 350/1300 350/0025 Parts drawing 16 Item 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 2 15 14 3 13 4 12 5 11 10 9 8 Description Self locking nut Handle Snap ring (optional suffix ‘F’) Valve body Gauge filter (optional suffix ‘F’) ¼” BSP plug PTFE O ring Ball Front ball seal Rear ball seal Spindle PTFE O ring (2) Stuffing boss (2) PTFE washer Disc spring M8 washer Part No. 5112-031 530/0020 5120-017 530/1100 353/0010 5128-005 5005-048 350/0002 5005-006 5005-007 530/0001 5005-008 530/0003 5003-002 5113-036 5113-005 6 7 Repair Kits: Items marked included in Repair Kit - 530/00RK (item 6 x2) Seal Kits: Items marked included in Seal Kit - 530/00SK Fort Vale Engineering Ltd. 2012 Page 4 BALL003 REV05-27.09.12
2” Full Bore Blacko Ball Valve Data 2” Full Bore Blacko Ball Valve - inlet flange drilled 4 x 18mm holes on a 125mm PCD (DIN50 PN16); outlet flange with 4 x 18mm open slots on a 120.7mm minimum diameter to suit 2” ASA150 and DIN50 PN40. Left hand operated with TIR facility to handle. Contact parts manufactured in 316 stainless steel with PTFE seals. Options - A full range of air inlet and discharge ball valves is available, both manually and mechanically actuated. Steam-heated version. Specification Fitting Details Weight Design Pressure (MAWP) Hydraulic Test Pressure Design Temperature Range (-40 F to 400 F) Part number : 370/0100 94.6 190.5 5.5 Kg 7.5 Bar (108.8 PSI) 15 Bar (217.5 PSI) -40 C to 205 C 45 Ø50.0 Ø50.0 4 SLOTS Ø17.8 EQUI-SPACED ON A 120.7 MIN PCD. Ø85.1 Ø67.9 Design Approval by Lloyds Register of Shipping Approved to BS EN14432 Range 4 HOLES Ø17.8 EQUI-SPACED ON A 125.0 PCD. 14.0 Ø165.1 Part No. Description 370/0100SH 370/0140 370/0150 370/0180 c/w steam heating provision c/w DN80 inlet adaptor & outlet blind flange c/w 2” BSP outlet spigot flange c/w outlet blind flange Associated Parts Ø165.1 Recommended bolt torque 81 Nm (60 Lb/ft) Associated Parts Part No. Tank weld-in pad Stud kit Outlet gasket Blind flange Bolting kit 355/3100 311/3700 5005-361 370/4239CM 311/3500 Item Description Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 M10 self lock nut M10 plain washer Handle 16mm Belleville washer (3) Stuffing collar PTFE O ring Bottom bearing Spindle Stop bolt 2” ballvalve body PTFE seal 50mm ball PTFE seal 5112-008 5113-009 370/0125 5113-038 370/0103 5005-688 370/0104 370/0120 370/0107 370/0110 370/0102 370/3301 370/0105 Parts drawing 1 2 3 4 5 6 7 8 9 10 SEAL KIT Part number 370/01SK contains all parts marked 13 12 11 Fort Vale Engineering Ltd. 2017 Page 5 BALL019 REV05-15.11.17
Data 2” Pneumatic Blacko Ball Valve 2” Pneumatically Operated Air Inlet Ball Valve - inlet flange drilled 4 x 18mm holes on a 125mm PCD; outlet flange 4 x 18mm open slots on a 120.7mm minimum PCD to suit 2” ASA 150/DIN50 PN40. Valve manufactured in 316 stainless steel with PTFE seals. Fitted with Kinetrol pneumatic actuator with spring return and ¼” BSP air inlet. Options - Full range of manually operated air inlet valves available. Specification Weight Design Pressure (MAWP) Test Pressure Design Temperature: Valve Kinetrol Actuator Range 5.88 Kg 7.5 Bar (108.8 PSI) 15 Bar (217.5 PSI) -40 C to 205 C (-40 F to 400 F) -20 C to 80 C (-4 F to 176 F) Part No. Description 370/0100PN/1 370/0100 2” pneumatic Blacko ball valve 2” manually operated Blacko ball valve Associated Parts Ball valve approved to BS EN 14432. Associated Parts Part No. Mating flange Tank weld-in pad Stud kit Outlet gasket Blind flange Bolting kit 294/0082 355/3100 311/3700 5005-361 370/4239CM 311/3000 Fitting Details Part Number : 370/0100PN/1 1.1 135.3 Ø50.0 76.0 14.5 32.6 178.7 72.2 Ø50.0 14.1 Ø165.1 Ø97.5 STD SERRATIONS Ø85.1 Ø165.1 144.6 347.2 4 HOLES Ø17.8 EQUI-SPACED ON A 125.0 PCD 4 SLOTS Ø17.8 EQUI-SPACED ON A 120.7 MIN PCD Fort Vale Engineering Ltd. 2018 Page 6 BALL016 REV03-30.11.18
2” Pneumatic Blacko Ball Valve Data Parts drawing 1 11 14 19 13 17 16 18 15 12 5 6 2 7 8 9 3 10 4 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Description Body PTFE front seal Ø50mm ball PTFE rear seal Spindle PTFE O ring Belleville washer (3) Spline adaptor assembly M6 spring washer (4) M6 hex bolt (4) Kinetrol pneumatic actuator Mounting bracket M8 spring washer (4) M8 hex bolt (4) M10 self lock nut M10 plain washer Stuffing collar Bottom bearing bush Spacer boss (4) Part No. 370/0110 370/0102 370/3301 370/0105 370/0120 5005-688 5113-038 370/0209 5113-008 5111-076 5127-078 370/0208 5113-003 5111-822 5112-008 5113-009 370/0103 370/0104 370/0163 SEAL KIT Part number 370/01SK contains all parts marked Fort Vale Engineering Ltd. 2017 Page 7 BALL017 REV02-15.05.17
Data Part Number : 350/0025 Tank weld-in flange to suit 1½” Blacko airline ball valve. Manufactured in 316 stainless steel. Airline Valve Ancillaries Tank Weld-in Flanges Fitting Details Ø127.0 22.4 Ø57.2 SERRATIONS 4 X M10 HOLES EQUI-SPACED ON A 103.4 PCD Part Number : 355/1000 Tank weld-in flange to suit 2” BSP airline butterfly valve. Manufactured in 316 stainless steel. Ø31.8 Fitting Details Ø127.0 Ø76.2 SERRATIONS 22.4 Ø48.8 4 X M10 HOLES EQUI-SPACED ON A 100.0 PCD Part Number : 355/3100 Tank weld-in flange to suit 2” flanged airline butterfly valve. Manufactured in 316 stainless steel. Fitting Details Ø165.1 Ø88.9 SERRATIONS 29.2 Ø48.8 4 X M16 HOLES EQUISPACED ON A 125.0 PCD. Fort Vale Engineering Ltd. 2012 Page 8 BALL004 REV01-26.09.12
Spares UK Tel : 44 (0)1282 687100 UK Fax: 44 (0)1282 687110 sales@fortvale.com NL Tel : 31 180 483333 NL Fax: 31 180 410797 bvsales@fortvale.com Airline Valve Installation 1½” Airline Ball Valves Bolt Kit 311/3500 Blind Flange 530/8053CM 1½" BSP Dust Cap 10300PS Gasket 5005-348 1½" BSP Cap 10300PS 1½" BSP Airline Ball Valve 530/0000 1½" NPT Cap 10300PNT 1½" Flanged Airline Ball Valve 530/1000 1½" BSP Dual Fitting Airline Ball Valve 530/0300 Stud Kit 350/1300 Tank Pad 350/0025 1½” BSP to DIN Adaptor Flange Conversion Kits To convert a 1½” BSP Blacko airline ball valve to a DIN40 or a DIN50 flanged connection. Kit includes BSP to DIN adaptor flange, bent handle, envelope gasket, blind flange and bolting kit. Adaptor flange available separately. Note : Airline ball valve not included. Description Part No. 1½” BSP to DIN 40 conversion kit 1½” BSP to DIN 40 adaptor flange only 1½” BSP to DIN 50 conversion kit 1½” BSP to DIN 50 adaptor flange only 530/ADAP40KIT 530/ADAP40 530/ADAP50KIT 530/ADAP50 Fort Vale Engineering Ltd. 2018 Page 9 SPA042 REV05-25.09.18
PFA Lined 50mm Full Bore Flanged Ball Valve Data PFA Lined 50mm Full Bore Flanged Ball Valve - inlet flange drilled 4 x 18mm holes on a 126mm PCD; outlet flange drilled 4 x 18mm slots on a 120.7mm to 127mm PCD. Valve manufactured in stainless steel with PTFE main seal. All parts in contact with the cargo lined with PFA. Options - range of PFA lined ball valves (See RANGE) Fitting Details Specification Part number : 370/P100 223.9 Ø 165.0 Ø 100.6 21.0 Ø 50.0 Weight Design Pressure (MAWP) Test Pressure Design Temperature Range 12.15 Kg 6.9 Bar (100 PSI) 10.3 Bar (150 PSI) -40 C to 200 C (-40 F to 392 F) 67.0 131.0 Valve complies with EN14432 and RID norms. Range Ø 105.0 Ø 165.0 Ø 50.7 Part No. 530/P100 370/P100 360/P030X 67.0 45 4 SLOTS Ø18 EQUI-SPACED ON A 120.7 TO 127.0 PCD Description 25mm PFA lined reduced bore ball valve 50mm PFA lined full bore ball valve 80mm PFA lined full bore ball valve 142.9 Associated Parts Part No. 311/3790 311/3590 370/4239PFA Associated Parts Stud kit Bolting kit PFA lined blind flange Fitting Details 1 2 3 17 4 5 6 7 8 10 9 16 15 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Description M5 screw Retaining washer Handle Stop pin (2) Stuffing plate Seal carrier Viton O ring Viton O ring Perfluoroelastomer O ring PFA lined body PTFE ball seal (2) Fortyt O ring (2) PFA lined obturator M8 cap screw (4) PFA lined clamp plate Perfluoroelastomer O ring (2) M6 cap screw (2) Part No. 5111-113 20370/5 370/3306/1 370/P107 370/P114 370/P113 ORB115VL ORB121VL 5005-214PER 370/P110 370/P115 ORM0580400F0 370/P101 5111-010 370/P111 5005-370P 5111-015 14 SEAL KIT Part number 370/P100SK contains all parts marked 12 11 13 Fort Vale Engineering Ltd. 2017 Page 10 BALL027 REV05-24.04.17
2” Full Bore Ball Valve - Hydrogen Peroxide Data 2” Full Bore Ball Valve - for Hydrogen Peroxide tank specification. Inlet drilled 6 x 14mm holes on a 168mm PCD. Outlet drilled 4 x 18mm slots to suit 2” ASA 150, 2” BSTD and DIN 50 PN 10. The inlet flange is specially designed to fit a standard 3” top discharge pad to ensure interchangeability with the Fort Vale 3” flanged butterfly valve. The ball valve body has a ¼” BSP connection to accept a pressure gauge and the ball incorporates a bleed hole to facilitate monitoring the tank pressure at all times. Contact parts manufactured in 316 stainless steel with PTFE seals. Options - other inlet flanges available. Specification Fitting Details Example shown : 370/0140 190.5 Weight Design Pressure Hydraulic Test Pressure Design Temperature Ø50.0 94.6 121.6 6 HOLES Ø14MM SPACED AS SHOWN ON A 168.3 PCD 32.5 4 HOLES Ø18MM EQUI-SPACED ON A 125.0 PCD BLANKING FLANGE 35 35 Approved to BS EN14432 Range 4 SLOTS Ø18MM EQUI-SPACED ON A 114.3 TO 125.0 PCD 55 13.9 Kg 7 Bar (101.5 PSI) 15 Bar (217.5 PSI) -40 C to 205 C (-40 F to 400 F) 1/4"BSP Different inlet flange configurations are available upon request. 60.2 Associated Parts 72.1 97.6 12.7 11.3 Ø200.0 Ø140.0 SERRATIONS Part No. Associated Parts 368/0800 5005-222P 368/0810 5005-169 312/1000 Tank weld-in pad Solid PTFE gasket Syphon tube stub pipe assembly CNAF/PTFE envelope gasket Stud kit Parts drawing Item 1 2 3 Description Part No. Item M10 self locking nut M10 washer Handle 5112-008 5113-009 370/0125 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 1 20 2 21 3 4 5 6 7 9 8 11 12 19 Description Part No. Belleville washer (3) Stuffing collar PTFE O ring Bottom bearing 2” ball valve spindle Stop screw M16 hex bolt (4) M16 spring washer (8) M16 full nut (8) Blanking flange PTFE gasket ¼” BSP hex head plug 2” ball valve body Rear PTFE ball seal 2” ball Front PTFE ball seal Adaptor flange M16 stud (4) 5113-038 370/0103 5005-688 370/0104 370/0120 370/0107 5111-031 5113-012 5112-003 370/4239 5005-724P 5128-005 370/0115 370/0105 370/3309 370/0102 370/0145 S0600/3 18 SEAL KIT Part no. 370/01SK contains all parts marked 17 16 15 14 13 12 11 Fort Vale Engineering Ltd. 2013 10 Page 11 BALL012 REV03-19.09.13
Data 2” Full Bore Blacko Ball Valve Offshore Specification 2” Full Bore Blacko Ball Valve - inlet flange with 4 open slots to suit 2” BSTD / 2” ASA 150 and DIN50 PN40. Outlet flange with 2” BSP spigot. Left hand operated with TIR facility to handle. Contact parts manufactured in 316 stainless steel with PTFE seals. Options - NPT outlet and cap available. Specification Fitting Details Part number : 370/0150 39.6 83.3 8 Kg 7 Bar (101.5 PSI) 10.5 Bar (152.25 PSI) -40 C to 205 C (-40 F to 400 F) Approved to BS EN 14432 Design approval by Lloyds Register of Shipping. 2” BSP 94.8 4 OPEN SLOTS Ø17.8 THRO EQUI-SPACED WITH A MIN DIA OF 120.7 Weight Design Pressure (MAWP) Hydraulic Test Pressure Design Temperature Range 4 HOLES Ø17.8 THRO EQUISPACED ON A 125.0 PCD DN50 PN40 Part No. Outlet 370/0150 370/0150NPT 2” BSP outlet spigot flange 2” NPT outlet and NPT cap 165.1 Associated Parts 165.1 Part No. Description 355/3100 311/3700 10301PS 10301NPTP Tank weld-in flange Stud kit 2” BSP blank cap with chain & PTFE seal 2” NPTP blank cap with captivation wire & PTFE seal Parts drawing SEAL KIT Part number 370/015SK contains all parts marked 1 2 17 3 4 5 7 8 6 9 16 15 Item Description Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 M10 self lock nut M10 plain washer Handle 16mm Belleville washer (3) Stuffing collar Bottom bearing bush PTFE O ring Spindle Stop bolt 2” ballvalve body PTFE seal (2) 50mm ball Body seal Outlet flange M16 full nut (4) M16 spring washer (4) M16 hexhead setscrew (4) 5112-008 5113-009 370/0125 5113-038 370/0103 370/0104 5005-688 370/0120 370/0107 370/0110 370/0102 370/3301 370/0106 370/0130 5112-003 5113-012 5111-036 14 REPAIR KIT Part number 370/015RK contains all parts marked 13 11 12 11 Fort Vale Engineering Ltd. 2003 10 Page 12 BALL015 REV03-06.12.18
Page 13 THIS PAGE IS INTENTIONALLY BLANK
2” Full Bore Gas Ball Valve Data TM 2” Full Bore Gas Ball Valve - DN 50 PN 40 high pressure valve. Flange drilling: 4 x 18mm holes on a 127mm PCD (2” ASA150) and 8 x 18mm holes on a 127mm PCD (2” ASA 300). Right hand operation. Contact parts manufactured in 316 stainless steel with PTFE seals. Options - outlet flange supplied with 1/8” NPT connection to fit bleed valve. Other flange drillings available. Left hand operation. Specification Weight Design Pressure (MAWP) Service Test Pressure Design Temperature Range Range 9 Kgs 34.5 Bar (500 PSI) 70 Bar (1015 PSI) -50 C to 80 C (-58 F to 176 F) Design approval by Lloyds Register of Shipping and Russian Maritime Register of Shipping. All valves may be manufactured to TPED. Part No. Description 370/3335B 370/3300B 370/3400B 2” ASA 300lb right hand valve DN 50 PN 40 right hand valve DN 50 PN 40 left hand valve Associated Parts Part No. Associated Parts 252/2095 Blind flange (2” ASA 300 lbs) Fitting Details Example shown : 370/3335B 4 HOLES Ø 18.0 EQUI-SPACED ON A 127.0 PCD (5.00”) [2” ASA 150] 150.5 (5.93”) 20.3 (0.80”) 3.0 (0.12”) Ø 165.1 (6.50”) Ø 101.4 (3.99”) SERRATIONS 50.0 (1.97”) Ø 102.1 (4.02”) Ø 165.1 (6.50”) 138.4 (5.45”) 223.8 (8.81”) 8 HOLES Ø 18.0 EQUI-SPACED ON A 127.0 PCD (5.00”) [2” ASA 300] 61.5 (2.42”) Fort Vale Engineering Ltd. 2008 Page 14 GAS025 REV02-10.12.07
2” Full Bore Gas Ball Valve Data TM Parts drawing 1 SEAL KIT 2 Part number 370/33SKB contains all parts marked 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 16 18 19 20 21 A detailed step-by-step maintenance manual is available for our gas ballvalve in both printed and CD formats. Please contact our Sales team for further information. Fort Vale Engineering Ltd. 2008 Item Description Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 M10 self locking nut M10 washer Handle Disc spring (3) M6 hex head bolt (4) M6 spring washer (4) Clamp plate Neoprene washer Neoprene washer Spindle bush Bottom seal Bottom bush Spindle Ball valve body M12 stud (4) RTFE ball seal (2) 50mm ball Body seal Ball valve body half M12 spring washer (4) M12 full nut (4) 5112-008 5113-009 370/3306 5113-038 5111-022 5113-008 370/3305B 5005-216 5005-866N 370/3307B 359/2007 370/3321 370/3320 370/3365 370/3314 370/3302 370/3301 370/3303 370/3316 5113-010 5112-006 Page 15 GAS026 REV01-02.12.07
PFA Lined 80mm Full Bore Ball Valve Data TM PFA Lined 80mm Full Bore Ball Valve - inlet flange drilled 4 x 18mm holes on a 160mm PCD; outlet flange drilled 4 x 18mm slots equi-spaced on a 146 to 160mm PCD. (3” BSTD to DIN80) Left hand operated with TIR to handle. Valve manufactured in stainless steel with PTFE main seal. All parts in contact with the cargo lined with PFA. Options - right hand operated version. Range of PFA lined ball valves (See RANGE) Specification Range Weight Design Pressure (MAWP) Test Pressure Design Temperature Range 12.9 Kg 6.9 Bar (100 PSI) 10.34 Bar (150 PSI) -40 C to 130 C -40 F to 266 F Part No. Description 530/P100 370/P100 360/P030X 25mm PFA lined reduced bore ball valve 50mm PFA lined full bore ball valve 80mm PFA lined full bore ball valve X in part number denotes whether left (L) or right (R) hand valve. Valve complies with EN14432:2006 and RID norms. Associated Parts Part No. Associated Parts 368/0500P 368/8047L 5005-417 360/8095P 3” BSP PFA lined outlet flange 3” BSP Halar lined eccentric outlet flange Solid PTFE outlet gasket PFA lined blind flange Fitting Details Example shown : 360/P030L 378.2 Fort Vale Engineering Ltd. 2009 Ø 197.0 Ø 113.0 Ø 74.0 Ø 194.0 OUTLET FLANGE 4 X 18MM SLOTS EQUI-SPACED ON A 146MM (3”BSTD) TO 160MM (DIN80) PCD Ø 140.0 170.0 POSITION CLAMP PLATE TO ACHIEVE HANDING. (CLAMP PLATE SHOWN IN LEFT HAND POSITION) 4 HOLES Ø 18MM SPACED AS SHOWN ON A 160MM PCD. 45.0 117.8 27.4 20.7 Page 16 BALL025 REV00-21.09.09
PFA Lined 80mm Full Bore Ball Valve Data Parts drawing 1 2 3 4 5 6 7 8 17 9 16 Item Description Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 M8 hex bolt (4) M8 spring washer (4) M12 locking nut M12 washer Handle 20mm washer (2) Clamp plate Stainless steel stuffing collar PTFE O ring (3) PFA lined spindle PFA lined body PTFE front & rear seal (2) PFA coated ball PFA lined clamp plate M6 countersunk bolt (3) Bottom stuffing collar Top stuffing collar 5111-046 5113-003 5112-007 5123-003 360/3416 5113-041 360/3406/1 360/3464 5005-654 360/3422PL 360/P020 360/3402/5 360/3401PL 360/3462PL 5111-030 360/3413/1 360/3412/1 SEAL KIT Part number 360/P0SK contains all parts marked 10 11 12 13 12 14 15 Fort Vale Engineering Ltd. 2017 Page 17 BALL026 REV02-24.04.17
3” Blacko Ball Valve 3” BSP Outlet Data 3” Blacko Ball Valve - inlet flange drilled 6 x 14mm holes (see below) on a 168.3mm PCD; 3” BSP male outlet connection. Left hand operated with TIR facility to handle. Contact parts manufactured in 316 stainless steel with PTFE seals. Options - Right hand operation. Steam heated version. Specification Range Weight Design Pressure (MAWP) Hydraulic Test Pressure Design Temperature Range 15.9 Kg 7 Bar (101.5 PSI) 10.5 Bar (152.3 PSI) -40 C to 200 C (-40 F to 392 F) M12 bolts torque setting : 65 Nm (48 LBF FT) Part No. Description 360/5000L 360/5000R 360/5000XSH Left hand operated, TIR Right hand operated, TIR Steam heated, left or right hand operated Associated Parts Approved to BS EN14432 & BS EN14025 Part No. Description 20378 360/0300 20406 5005-036 360/8070 311/3000 10303PS 10329P Mating flange Inlet bolting kit Bobbin adaptor for 3” table D outlet Outlet gasket 3” Table D Blind flange Outlet bolting kit 3” BSP dust cap with PTFE washer 3” dust cap washer Fitting Details Example shown : 360/5000L 378.2 CLAMP PLATE SEE NOTE* Ø76.2 Ø115.8 3"BSP Ø77.9 168.4 6 HOLES Ø14.0 SPACED AS SHOWN ON A 168.3 PCD 55 55 35 6 HOLES Ø14.0 SPACED AS SHOWN ON A 168.3 PCD. 35 35 162.8 *CLAMP PLATE MAY BE ROTATED TO ACHIEVE HANDING. (CLAMP PLATE SHOWN IN LEFT HAND POSITION) 57.7 31.8 FULL THREAD 12.7 15.4 Fort Vale Engineering Ltd. 2017 47.1 Page 18 2.5 17.5 BALL007 REV04-20.04.17
3” Blacko Ball Valve 3” BSP Outlet Data Parts drawing 1 2 3 4 20 19 18 5 6 17 7 8 9 10 11 12 13 14 15 16 Item 1 2 3 4 5 6 7 8 9 10 Description Part No. Item M8 hex head bolt (4) M8 flat section spring washer (4) M12 self locking nut M12 washer Top stuffing collar Bottom stuffing collar Bottom bearing Spindle 3” flanged ball valve body Back seal 5111-822 5113-003 5112-007 5123-003 360/3412 360/3413 360/3421 360/3422 360/5014 360/3402 11 12 13 14 15 16 17 18 19 20 SEAL KIT part number 360/50SK contains all parts marked Fort Vale Engineering Ltd. 2017 Description Part No. Solid ball plug Front seal 3” BSP male outlet flange M12 full nut (6) M12 flat section spring washer (6) M12 hex head bolt (6) PTFE O ring (2) Clamp plate 20mm Belleville washer (2) Handle weld assembly 360/3401 360/3405 20409/14 5112-006 5113-010 5111-023 5005-113 360/5005 5113-041 360/3416 REPAIR KIT part number 360/50RK contains all parts marked Page 19 BALL008 REV05-24.04.17
3” Blacko Ball Valve Slotted 4 Hole Outlet Data 3” Blacko Ball Valve Assembly - inlet flange drilled 6 x 14mm holes on a 168mm PCD. Slotted 4 hole outlet flange. Left hand operated. Contact parts manufactured in 316 stainless steel with PTFE seals. Options - right hand operation. Steam heated version. Available with high temperature seals. A version with 4 hole inlet is also available. Specification Weight Design Pressure (MAWP) Hydraulic Test Pressure Design Temperature Range Range 12.5 Kg 7.5 Bar (108.8 PSI) 11.25 Bar (163.2 PSI) -40 C to 200 C (-40 F to 392 F) Part No. Description 360/5050X 3” standard ball valve, 6 hole inlet, 4 hole outlet Fitted with high temperature seals Steam heated valve 3" standard ball valve, 4 hole inlet, 4 hole outlet Steam heated valve 360/5050XHT 360/5050XSH 360/5030X Approved to BS EN14432 Associated Parts 360/5030XSH Associated Parts Part No. Outlet flange Outlet gasket Blind flange Bolting kit (outlet) Mating flange Inlet gasket to suit 20378 mating flange Bolting kit (inlet) 368/0500 5005-417 360/8095 311/3500 20378 5005-169 360/0300 X in part number denotes whether left (L) or right (R) hand valve Fitting Details Example shown : 360/5050L 378.2 Ø76.2 Ø115.8 STD SERRATIONS Ø127.0 165.2 ROTATE CLAMP PLATE TO ACHIEVE HANDING. (Clamp plate shown in left hand position) 55 6 HOLES Ø14.0 SPACED AS SHOWN ON A 168.3 PCD 45 105.6 35 35 77.5 Ø196.9 BOTH FLANGES Ø127.0 STD SERRATIONS SLOTTED OUTLET FLANGE 4 X 18MM WIDE SLOTS MINIMUM 146.0 PCD - 3"BSTD MAXIMUM 160.0 PCD - DIN80 15.4 Fort Vale Engineering Ltd. 2018 20.0 2.5 Page 20 BALL009 REV07-10.12.18
3” Blacko Ball Valve Slotted 4 Hole Outlet Data TM Parts drawing 1 2 3 4 5 6 7 8 17 9 16 10 11 12 13 14 15 Item 1 2 3 4 5 6 7 8 Description Part No. Item M8 hex head bolt (4) M8 spring washer (4) M12 self locking nut M12 washer Handle 20mm Belleville washer (2) Clamp plate Top stuffing collar 5111-822 5113-003 5112-007 5123-003 360/3416 5113-041 360/5005 360/3412 9 10 11 12 13 14 15 16 SEAL KIT part number 360/50SK contains all parts marked Fort Vale Engineering Ltd. 2011 Description Part No. Bottom stuffing collar Bottom bearing Spindle 3” flanged ball valve body Back seal Solid ball plug Front seal PTFE O ring (2) 360/3413 360/3421 360/3422 360/5015 360/3402 360/3401 360/3405 5005-113 REPAIR KIT part number 360/50RK contains all parts marked Page 21 BALL010 REV03-19.09.11
4” BSP Full Bore Ball Valve Data 4”BSP Full Bore Ball Valve - inlet flange drilled 8 x 18mm holes equi-spaced on a 180mm PCD (DIN100 PN16); outlet flange 4” BSP. Available with left hand or right hand operation. Manufactured in 316 stainless steel fitted with PTFE seals. Options - available in sizes from 2” to 5” in stainless steel or carbon steel. Steam-heated version. Alternative outlet connections. Above photograph shows 460/5050X specification. Specification Fitting Details Part Number : 460/5000X Weight Design Pressure (MAWP) Hydraulic Test Pressure Design Temperature Range 378.2 Approved to BS EN14432. i Operating Instructions available - OPIN25 57.2
» 2" Ball Valve - H2O2 Specification » 2" - Offshore Specification » 2" Full Bore Ball Valve - Gas » 80mm PFA Lined Flanged Ball Valve » 3" - 3" BSP Outlet » 3" - » 4" - Rail » Socket / In-Line Blacko Airline Ball Valve Blacko Airline Ball Valve Blacko Airline Ball Valve Blacko Airline Ball Valve Airline Valve Blacko Ball Valve
the flow rate and pressure. To select the correct valve to fulfill these functions properly, an outline of the different types of valves and their features is given below. Butterfly valve Butterfly valve and globe valve Butterfly valve and ball valve Butterfly valve and gate valve Check valve Gate valve Globe valve Ball valve Valve shaped like a
Manual ball valve with electric feedback unit in the multi-functional module Solvent cement socket. Threaded socket. Standard ball valve Ball valve with lockable handle Ball valve with pneumatic actuator and manual override Ball valve with electric actuator Ball valve with handle extensio
Ball Valve Type 546 Ball Valve Type 375 COLORO Compact Ball Valve Type 355 COLORO Ball Valve Type 353 Metering Ball Valve Type 523 True union ball valve. Maintenance free. Guaranteed performance. Tested 50,000 cycles. Can be converted to actu-ated in-line. Handle extension, silicone-free and Control Ball feature are available options.
through 24) V150, V200 and V300 Vee-Ball control valves. The Vee-Ball valve combines globe valve ruggedness with the efficiency of a rotary valve. The Vee-Ball valve is a segmented ball valve which features a contoured segmented V-Notch ball. A shearing action between the V-notch ball and the ball seal (figure 1) promotes smooth, nonclogging .
When choosing the right three-way ball valve, it is important to both understand the key three-way valve design options and plan how the valves will be used. First, some basics. What is a three-way ball valve? Three-, four- and five-way ball valves are called multi-port valves. The three-way ball valve is the most common multi-port ball valve.
Ball Screw Selection White Paper Ball Screw Basics A ball screw assembly consists of a ball screw and a ball nut with recirculating ball bearings. (Figure 1) The interface between the screw and the nut is made by ball bearings that roll in matching forms in the ball screw and ball nut. The load on the ball screw
G- Autoflow Valve 2.0 GPM H- Autoflow Valve 2.5 GPM I- Autoflow Valve 2.8 GPM J- Autoflow Valve 3.0 GPM K- Autoflow Valve 3.3 GPM L- Autoflow Valve 3.5 GPM M- Autoflow Valve 4.0 GPM N- Autoflow Valve 4.5 GPM O- Autoflow Valve 5.0 GPM P- Autoflow Valve 5.5 GPM Q- Autoflow Valve 6.0 GPM R- Autoflow Valve
The Awards have become the key fixture in the health and safety calendar and offer organisations a prime opportunity to prove their ongoing commitment to raising health and safety standards and to be a part of the longest running and most highly respected occupational safety awards programme. For the last twelve years, the awards have been sponsored by NEBOSH, who along with IOSH and other key .
