LSC BUS DUCT - Amazon Web Services
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지2 LSC BUS DUCT LS Cable Bus Duct System
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지3 LSC Bus Duct SYSTEM 1. INTRODUCTION 3 1.1 GENERAL SPECIFICATIONS 1.2 OUTSTANDING FEATURE OF LSC BUS DUCT 1.3 CATALOGING 2. HIGH POWER DISTRIBUTION (600A 6000A) 9 2.1 GENERAL SPECIFICATIONS 2.1.1 I-SERIES BUS DUCT 2.1.2 8-SERIES BUS DUCT 2.1.3 F-SERIES BUS DUCT 2.1.4 Y-SERIES BUS DUCT 2.2 GROUNDING & IP DEGREE 2.2.1 GROUNDING 2.2.2 IP DEGREE 2.3 PART DIMENSIONS 2.3.1 SECTIONAL DIMENSIONS 2.3.2 FLANGED END DIMENSIONS 2.3.3 PHYSICAL DATA FOR FITTINGS 2.4 BRANCH METHOD 2.5 TECHNICAL DATA 2.6 MAINTENANCE 3. MEDIUM POWER DISTRIBUTION (100A 400A) 3.1 M-SERIES (MINI BUS DUCT) 3.2 B-SERIES (BABY BUS DUCT) 4. AIR INSULATED BUS DUCT 4.1 A-SERIES (LOW VOLTAGE) 4.2 H-SERIES (HIGH VOLTAGE) 51 45
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지4 1. INTRODUCTION 1.1 GENERAL SPECIFICATIONS 1.2 OUTSTANDING FEATURE OF LSC BUS DUCT 1.3 CATALOGING BUS DUCT which has non-corrosive conductor covered by non-flammable insulator inside of steel housing for protection is an electrical distribution system made rapid progress and growth recently as the most optimized option with flexibility and lower losses for massive power delivery in high rise commercial building and industrial plant.
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지4 1.1 General Specifications BUS DUCT, A Power Distribution System of High Stability & Easy Maintenance When electrical power became widely used in industry, a need was created for a rational energy carrying and distribution system to supply the machineries with electricity. Basically, LSC Bus Duct has been designed, manufactured, and provided in the following conditions. Suitable to Mass-Current Bus Bar LSC Bus Duct system which can carry massive power upto 6000A with lower losses is used as distribution system for main line according to needs of high-rise building and factory plant through the features of flexibility, safety, reliability, economical efficiency and improved demerits of cable epochally. Copper bus bar has conductivity of 99% or more, or Aluminum bus bar has conductivity of 61% or more. LSC Bus Duct system is simplified so that load may be freely diverged, extending, moving, replacing and maintenance of the load easily. This plating improves the contact resistance and prevents electrical corrosion. Meanwhile, this has a fine view harmonized with modern architectural sense. Service Conditions Ambient temperature : -15 C 40 C Relative Humidity : 95% or below Installation Attitude : Maximum 1000M above sea level Standards KSC 8450: Bus ways JISC 8364: BUS DUCT IEC 60439-1&2: Bus ways BSEN 60439: Bus ways 4 5 Plating between contact sections of conductors are; Cu conductor : Tin-Plated Al conductor : Silver-Plated Temperature Rise Property Temperature rise shall be within 55 C in the joint part of conductor and 40 C or less in the external surface of duct, under an ambient temperature of 40 C or less. Insulation Multi-Layer polyester films of class B(130 C) shall be applied into thickness 0.5mm on conductor. BMC forms which is polyester reinforced by glass fiber shall be applied as a spacer between conductors of joint part or conductor and duct. FR-Insulation Multi-Layer of Fire Resistant Insulator(1200 C) shall be applied on conductor.
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지5 1.2 Outstanding Feature of LSC Bus Duct Benefits of LSC Bus Duct over wire and conduit LSC Bus Duct System can improve installation area and cost with the compact size in a big jump. Labor Savings Lower Voltage Drop LSC Bus Duct installation is faster when compared to other method of low voltage power distribution. While material costs may be slightly higher, the labors required to install LSC Bus Duct is often much lower. Because of its extremely low reactance, LSC Bus Duct voltage drop is low. This efficient design allow power to be delivered in an installation with the highest efficiency possible. This makes LSC Bus Duct ideal for efficient power distribution in commercial or industrial facilities. This results in an overall reduction in total installation cost. Compact Size LSC Bus Duct requires less space than wire and conduit. Easy to Install LSC Bus Duct incorporates the “one joint bolt type”. For connection work, bolt fastening forces were unified into the torque of 1200kg.cm. 1. Set the center line and level together 2. Fit together till the duct joiners touch the stoppers. 4. Attach the joint cover with M6 bolt & nut. 5. Completion of joint. Better Transmission Efficiency. Future Expansion Flexibility. High Short-Circuit Ratings. Harmonized View. 3. Tighten the “MF” nut by special ratchet wrench till the neck part of nut is broken and locked. SAFETY POINT: Nut (1) shall be neither taken off, nor dropped. when neck (2) is broken, twisting force remains.
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지6 1.3 Cataloging LSC BUS DUCT CODING Table 6 VOLTAGE SHAPE CURRENTS FIRE RANGE STRUCTURE RANGE RESISTANCE BRANCH LIMITS GROUNDING LSC BUS DUCT TYPE GENERAL IG TYPE PE EARTH IP TYPE HALF EARTH IH TYPE FULL EARTH IF TYPE GENERAL 8G TYPE PE EARTH 8P TYPE HALF EARTH 8H TYPE FULL EARTH 8F TYPE GENERAL FG TYPE PE EARTH FP TYPE HALF EARTH FH TYPE FULL EARTH FF TYPE GENERAL YG TYPE PE EARTH YP TYPE HALF EARTH YH TYPE FULL EARTH YF TYPE I-SERIES TO 400A WITHOUT POWER SHUTDOWN GENERAL TYPE COMPACT TYPE 8-SERIES TO 800A WITHOUT POWER SHUTDOWN BELOW 600V 600A 6000A F-SERIES TO 400A WITHOUT POWER SHUTDOWN LSC BUS DUCT SYSTEM FIRE RESISTANCE TYPE Y-SERIES TO 800A WITHOUT POWER SHUTDOWN 200A 400A M-SERIES 100A 200A B-SERIES AIR INSULATED BELOW 100A TYPE Mini PE EARTH Baby Lighting L-SERIES GENERAL TYPE I P Grade (41.54.65) IG41 IG54 IG65 IP41 IP54 IP65 IH41 IH54 IH65 IF41 IF54 IF65 8G41 8G54 8G65 8P41 8P54 8P65 8H41 8H54 8H65 8F41 8F54 8F65 FG41 FG54 FG65 FP41 FP54 FP65 FH41 FH54 FH65 FF41 FF54 FF65 YG41 YG54 YG65 YP41 YP54 YP65 YH41 YH54 YH65 YF41 YF54 YF65 MP41 MP54 MP65 BP41 BP54 BP65 LP41 LP54 LP65 AP41 A-SERIES PE EARTH Low Voltage AP54 AP65 600A 4000A HP41 OVER 600V H-SERIES PE EARTH High Voltage HP54 HP65 EACH TYPE OF BUS DUCT CAN BE SUPPLIED as IP DEGREE IP41 IP66 6 7
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지7 BUS DUCT SYSTEM Building 3F EN DC LO SE R SPRING VERTICAL HANGER ND DE GE AN L F L ICA RT W BO L E VE 2F EXPANSION JOINT RIG ID V HA NG ERT ICA ER L L TA ON RIZ HO E E T SE WI AT R FL NGE HA D GE AN FL D EN PLUG IN HOLE 1F PLUG IN UNIT RE DU CE R HO R EL IZON BO TA W L ME D HA IUM NG ER VE TE E RT L TA ON RIZ T HO F-SE OF D GE AN OX FL DB EN ICA L RIGID VERTICAL HANGER BASE CHANNEL FEED IN BOX SE WI GE ED GER N A H TR END FLANGED END BOX Transformer Y RA ET BL CA B1 R EA HG TC SW
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지8 BUS DUCT SYSTEM Factory FL EN ANDE DB D OX L ICA RT VE BOW EL or tdo Ou Insulated Bus Duct r oo Ind HO RI EL ZON BO T W AL 3.3KV 3P 3W 1200A(Cu-Fe) High Voltage Bus Duct AL NT IZO T R E HO F-S OF TR END FLANGED Transformer E WIS GE R ED ANGE H Insulated Bus Duct PLUG IN MINI BUS DUCT Feed in Box Cable D R H.V GEA H ITC SW ED EN G AN FL PLUG IN HOLE R L.V GEA H ITC SW PLUG IN MINI BUS DUCT PLUG IN BABY BUS DUCT PLUG IN BOX 8 9 END CLOSER
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지9 2. HIGH POWER DISTRIBUTION (600A 6000A) 2.1 GENERAL SPECIFICATIONS 2.1.1 I-SERIES BUS DUCT 2.1.2 8-SERIES BUS DUCT 2.1.3 F-SERIES 2.1.4 Y-SERIES 2.2 GROUNDING & IP DEGREE 2.2.1 GROUNDING 2.2.2 IP DEGREE 2.3 PART DIMENSIONS 2.3.1 SECTIONAL DIMENSIONS 2.3.2 FLANGED END DIMENSIONS 2.3.3 PHYSICAL DATA FOR FITTINGS 2.4 BRANCH METHOD 2.5 TECHNICAL DATA 2.6 MAINTENANCE
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지10 2.1 General Specifications 2.1.1 I-Series Bus Duct I-Series (Insulated Bus Duct) is a totally enclosed non-ventilated and sandwitch type bus duct system for 110, 220, 380, 440 and 600V power distribution. This is designed for indoor and drip-proof use and available from 600 to 6000A. The load branch of this I-Series are by plug-in unit upto 400A and by Tap-off unit over 400A. There are one bar, two bars and three bars per phase according to Ampacity. Fastening Bolt & Washer Reinforcement Band for Reducing Hysteresis & Eddy Current Loss and Reinforcing Short Circuit Capacity Steel Duct Coated with Paint Four Layer Polyester Film of Class B(130 C) Copper or Aluminum R.Head Bolt High Tension Joint Bolt Disk Spring(C) Stopper(D) Joint Cover Cross Head Driver Bolt & Washer Insulation Spacer(B) Contact Surface(A) (A) Contact Surface Silver-Plated for Aluminum Tin-Plated for Copper. (B) Insulation Spacer Polyester Resin BMC. (C) Disk Spring (Belleville Washer) Absorbs the Expansion & Contraction of Joint Parts. (D) Stopper Regulates the Length of Conductor Lapping. (E) Captive Hardware Anti-Rotation Fitting for Fastening High Tension Joint Bolt. Housing Connection Joint Cover Square Nut “I”- Series Bus Duct have Four Types according to Grounding Conductor. OPTION TYPE Grounding Option IP Grade Option Description 10 11 OPTION 1 OPTION 2 Table 10 OPTION 3 OPTION 4 Code : IG TYPE Code : IP TYPE Code : IH TYPE Code : IF TYPE Code : IG41 TYPE Code : IP41 TYPE Code : IH41 TYPE Code : IF41 TYPE Code : IG54 TYPE Code : IP54 TYPE Code : IH54 TYPE Code : IF54 TYPE Code : IG65 TYPE Code : IP65 TYPE Code : IH65 TYPE Code : IF65 TYPE Integral housing system Integral housing & External Earth bus bar system Integral Half Earth bus bar system Integral Full Earth bus bar system
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지11 2.1.2 8-Series “8”-Series(Plug-in 800A Bus Duct) has same all characteristics as I-Series. However 8-Series is specially designed for larger branch plug-in Amperes. The maximum branch of this 8-series is by plug-in upto 800A and by Tap off over 800A. So, this type is very useful for factory. 8-Series have double branch capacity. Max Plug in Ampere is 800A Plu g-in Mo ld RSTN RST Mo ld C ove r Ca ble D-PLUG IN TYPE Fig. 11.1 I-Series have single branch capacity. Max Plug in Ampere is 400A RSTN RST Plu g-in Co ver Ca ble S-PLUG IN TYPE Fig. 11.2 “8”-Series Bus Duct have Four Types according to Grounding Conductor. OPTION TYPE Grounding Option IP Grade Option Description OPTION 1 OPTION 2 Table 11 OPTION 3 OPTION 4 Code : 8G TYPE Code : 8P TYPE Code : 8H TYPE Code : 8F TYPE Code : 8G41 TYPE Code : 8P41 TYPE Code : 8H41 TYPE Code : 8F41 TYPE Code : 8G54 TYPE Code : 8P54 TYPE Code : 8H54 TYPE Code : 8F54 TYPE Code : 8G65 TYPE Code : 8P65 TYPE Code : 8H65 TYPE Code : 8F65 TYPE Integral housing system Integral housing & External Earth bus bar system Integral Half Earth bus bar system Integral Full Earth bus bar system
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지12 2.1.3 F-Series Bus Duct F-Series(Fire Resistant Bus Duct) complies with IEC 60331 (Fire Resistant, 750 C/ 180min). This LSC FR Bus Duct provides a integrity & reliability when fire occurred. Fire Resistant Insulator (heat resistance 1200 C) shall be applied on conductor. All mechanical & electrical characteristics are same as I-Series. Steel Duct with Coating Fire Resistant Insulator (Heat Resistance 1200 C) Copper or Aluminum Insulation Spacer Silver Plated Joint “F”-Series Bus Duct have Four Types according to Grouding Conductor. OPTION TYPE Grounding Option IP Grade Option Description 12 13 OPTION 1 OPTION 2 Table 12 OPTION 3 OPTION 4 Code : FG TYPE Code : FP TYPE Code : FH TYPE Code : FF TYPE Code : FG41 TYPE Code : FP41 TYPE Code : FH41 TYPE Code : FF41 TYPE Code : FG54 TYPE Code : FP54 TYPE Code : FH54 TYPE Code : FF54 TYPE Code : FG65 TYPE Code : FP65 TYPE Code : FH65 TYPE Code : FF65 TYPE Integral housing system Integral housing & External Earth bus bar system Integral Half Earth bus bar system Integral Full Earth bus bar system
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지13 2.1.4 Y-Series Bus Duct “Y”-Series(Plug-in 800A & FR Bus Duct) have combined functions of the “F”-Series and “8”-Series. This “Y”-Series Bus Duct are fire resistant and have plug-in 800A hole. “Y”-Series Bus Duct have Four Types according to Grounding Conductor. OPTION TYPE Grounding Option IP Grade Option Description OPTION 1 OPTION 2 OPTION 3 Table 13 OPTION 4 Code : YG TYPE Code : YP TYPE Code : YH TYPE Code : YF TYPE Code : YG41 TYPE Code : YP41 TYPE Code : YH41 TYPE Code : YF41 TYPE Code : YG54 TYPE Code : YP54 TYPE Code : YH54 TYPE Code : YF54 TYPE Code : YG65 TYPE Code : YP65 TYPE Code : YH65 TYPE Code : YF65 TYPE Integral housing system Integral housing & External Earth bus bar system Integral Half Earth bus bar system Integral Full Earth bus bar system We construct the Digital Infrastructure in every corner of the world.
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지14 2.2 GRONUDING & IP DEGREE 2.2.1 GROUNDING “G-Type”, “P-Type”-Integral housing & External PE Bus G-type is built with an Integral housing grounding system and provide an integral housing continuous current capacity ground path. P-type is built with an Integral housing grounding and external Earth bus system and provide an integral housing and external continuous current capacity ground path. G-TYPE P-TYPE W H B B H W P.E BUS(CU) 3t x 25w A A Fig. 14.1 Fig. 14.2 “H-Type”, “F-Type”-Internal Bus Bar H-type is built with an internal bus bar system and provide an integral 50% continuous current capacity ground path. F-type is built with an internal bus bar system and provide an integral 100% continuous current capacity ground path. H-TYPE F-TYPE A A N C B A PE 1/2PE A B C N Fig. 14.3 For dimensions and weights information, Please contact us. A C B A PEN PE A B C N C B A PE PE A B C N Fig. 14.4 H B B Full Earth 100%E A C B A PEN 1/2PE A B C 14 15 H B Half Earth 50%E W W W B W
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지15 2.2.2 IP DEGREE LSC Bus Duct provides optimum performance in the most demanding applications. Through superior design and applied materials technology, it assures uptime and reliability, even in severe-duty weather environments. Protection Degree IP41 /IP42 W With a degree of protection IP41/IP42, this Bus Duct System is ideal for in-door uses. H W B H A B A Fig. 15.1 Protection Degree IP54 /IP55 W(IP54) Feeder, plug-in and tap-off Bus Duct are available with either drip-proof or splash-proof construction. Generally for feeders, additional duct structure will be treated over one for indoor as below figures. So, weight will be added that much. Material used is steel plate on principle. but is adaptable according to user’s request. H 27 27 H W(IP54) H Fig. 15.2 Protection Degree IP65 /IP66 W 100 With a degree of protection IP65/IP66, this Bus Duct System is ideal for outdoor uses and wherever exist corrosive atmospheres. Stainless steel housing is optional. W H 100 H 86 H H 50 W 86 W 36 36 W 50 H Fig. 15.3 Construction options Table 15 IEC Degree of Protection Available Bus Duct IP41/IP42 Feeder, Plug-in, Riser Indoor IP54/IP55 Feeder, Plug-in, Riser Spray-proof/Splash-proof IP65/IP66 Feeder Outdoor For dimensions and weights information, Please contact us. Construction Type
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지16 2.3 PART DIMENSIONS 2.3.1 SECTIONAL DIMENSIONS 2.3.1.1 “G”-Type : Integral Housing Applying 1 ‘I-Series’ & ‘F-Series’ Dimensions. With Aluminum Conductors Rating in Amps A 600 800 1,000 1,200 1,500 1,600 2,000 2,500 3,000 3,500 4,000 4,500 5,000 6,000 6 6 6 10 10 10 10 10 10 10 10 10 10 10 Dimensions(mm) W B 3W 4W 55 100 125 75 100 125 100 100 125 100 110 140 125 110 140 150 110 140 175 110 140 230 110 140 150x2 110 140 175x2 110 140 200x2 110 140 230x2 110 140 175x3 110 140 200x3 110 140 Table 16.1 Weight (kg/m) H 115 135 160 160 185 210 235 290 385 435 485 545 635 710 3W 11 13 15 19 22 25 28 35 46 52 58 73 83 93 With Copper Conductors Fig. 16 Rating in Amps A 600 800 1,000 1,200 1,500 1,600 2,000 2,500 3,000 3,500 4,000 4,500 5,000 6,000 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Dimensions(mm) W B 3W 4W 55 100 125 55 100 125 75 100 125 100 100 125 125 100 125 150 100 125 175 100 125 125x2 100 125 150x2 100 125 175x2 100 125 200x2 100 125 150x3 100 125 175x3 100 125 200x3 100 125 Flg. 4W 13 15 18 23 27 31 34 43 56 64 72 88 100 112 a.d a.d a.d a.d a.d a.d a.d a.d b.e b.e b.e b.e c.f c.f Table 16.2 Weight (kg/m) H 115 115 135 160 185 210 235 335 385 435 485 560 635 710 3W 18 18 21 27 32 37 42 58 70 80 93 109 125 141 Flg. 4W 22 22 27 33 40 47 53 73 88 101 119 136 157 178 a.d a.d a.d a.d a.d a.d a.d b.e b.e b.e b.e c.f c.f c.f Dimensions : Millimeters NOTE: Feeder standard lengths is 3000mm Min. 500mm 2 ‘8-Series’ & ‘Y-Series’ Dimensions. Table 16.3 W-Dimensions PHASE 3W 4W Width 180 230 NOTE: Conductor’ size are same. Additional duct & Plug-in BMC structure will be treated over one for ‘G-type’. so weight will be added that much. For more information contact us. 16 17
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지17 2.3.1.2 “P”-Type : External PE Bus Applying 1 ‘I-Series’ & ‘F-Series’ Dimensions. With Aluminum Conductors Rating in Amps A 600 800 1,000 1,200 1,500 1,600 2,000 2,500 3,000 3,500 4,000 4,500 5,000 6,000 6 6 6 10 10 10 10 10 10 10 10 10 10 10 Dimensions(mm) W B 3W 4W 55 110 140 75 110 140 100 110 140 100 125 170 125 125 170 150 125 170 175 125 170 230 125 170 150x2 125 170 175x2 125 170 200x2 125 170 230x2 125 170 175x3 125 170 200x3 125 170 Table 17.1 Weight (kg/m) H 115 135 160 160 185 210 235 290 385 435 485 545 635 710 3W 14 17 18 22 25 28 31 38 49 55 61 76 86 96 With Copper Conductors Fig. 17 Rating in Amps A 600 800 1,000 1,200 1,500 1,600 2,000 2,500 3,000 3,500 4,000 4,500 5,000 6,000 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Dimensions(mm) W B 3W 4W 55 110 140 55 110 140 75 110 140 100 110 140 125 110 140 150 110 140 175 110 140 125x2 110 140 150x2 110 140 175x2 110 140 200x2 110 140 150x3 110 140 175x3 110 140 200x3 110 140 Flg. 4W 16 18 21 26 30 34 37 46 59 67 75 91 103 115 a.d a.d a.d a.d a.d a.d a.d a.d b.e b.e b.e b.e c.f c.f Table 17.2 Weight (kg/m) H 115 115 135 160 185 210 235 335 385 435 485 560 635 710 3W 21 21 24 30 35 40 45 61 73 83 96 112 128 144 Flg. 4W 25 25 30 36 43 50 56 76 91 104 122 139 160 181 a.d a.d a.d a.d a.d a.d a.d b.e b.e b.e b.e c.f c.f c.f Dimensions : Millimeters NOTE: Feeder standard lengths is 3000mm Min. 500mm 2 ‘8-Series’ & ‘Y-Series’ Dimensions. Table 17.3 W-Dimensions PHASE 3W 4W Width 180 230 NOTE: Conductor’ size are same. Additional duct & Plug-in BMC structure will be treated over one for ‘G-type’. so weight will be added that much. For more information contact us.
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지18 2.3.1.3 “H”-Type : Integral Half Earth (50%) 1 ‘I-Series’ & ‘F-Series’ Dimensions. With Aluminum Conductors B W H B B W A Fig-a B A A Fig-b A 600 800 1,000 1,200 1,500 1,600 2,000 2,500 3,000 3,500 4,000 4,500 5,000 6,000 6 6 6 10 10 10 10 10 10 10 10 10 10 10 Table 18.1 H 115 135 160 160 185 210 235 290 385 435 485 545 635 710 Weight (kg/m) Flg. 5W 16 17 21 26 31 35 38 47 61 69 78 88 106 119 a. a. a. a. a. a. a. a. b. b. b. b. c. c. With Copper Conductors B H B H W Rating in Amps Dimensions(mm) W B 5W 55 140 75 140 100 140 100 170 125 170 150 170 175 170 230 170 150x2 170 175x2 170 200x2 170 230x2 170 175x3 170 200x3 170 Fig-c Fig. 18 Rating in Amps A 600 800 1,000 1,200 1,500 1,600 2,000 2,500 3,000 3,500 4,000 4,500 5,000 6,000 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Dimensions(mm) W B 5W 55 140 55 140 75 140 100 140 125 140 150 140 175 140 125x2 140 150x2 140 175x2 140 200x2 140 150x3 140 175x3 140 200x3 140 Table 18.2 H 115 115 135 160 185 210 235 335 385 435 485 560 635 710 Weight (kg/m) Flg. 5W 26 26 31 38 45 53 59 81 97 111 130 147 170 192 a. a. a. a. a. a. a. b. b. b. b. c. c. c. Dimensions : Millimeters NOTE: Feeder standard lengths is 3000mm Min. 500mm 2 ‘8-Series’ & ‘Y-Series’ Dimensions. Table 18.3 W-Dimensions PHASE 5W Width 230 NOTE: Conductor’ size are same. Additional duct & Plug-in BMC structure will be treated over one for ‘G-type’. so weight will be added that much. For more information contact us. 18 19
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지19 2.3.1.4 “F”-Type : Integral Full Earth (100%) 1 ‘I-Series’ & ‘F-Series’ Dimensions. With Aluminum Conductors B W H B B W Rating in Amps A 600 800 1,000 1,200 1,500 1,600 2,000 2,500 3,000 3,500 4,000 4,500 5,000 6,000 6 6 6 10 10 10 10 10 10 10 10 10 10 10 Dimensions(mm) W B 5W 55 180 75 180 100 180 100 180 125 180 150 180 175 180 230 180 150x2 180 175x2 180 200x2 180 230x2 180 175x3 180 200x3 180 Table 19.1 H 115 135 160 160 185 210 235 290 385 435 485 545 635 710 Weight (kg/m) Flg. 5W 17 19 23 29 34 39 42 53 68 77 86 98 118 132 a. a. a. a. a. a. a. a. b. b. b. b. c. c. W A Fig-a B B H B H With Copper Conductors A Fig-b A Fig-c Fig. 19 Rating in Amps A 600 800 1,000 1,200 1,500 1,600 2,000 2,500 3,000 3,500 4,000 4,500 5,000 6,000 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Dimensions(mm) W B 5W 55 180 55 180 75 180 100 180 125 180 150 180 175 180 125x2 180 150x2 180 175x2 180 200x2 180 150x3 180 175x3 180 200x3 180 Table 19.2 H 115 115 135 160 185 210 235 335 385 435 485 560 635 710 Weight (kg/m) Flg. 5W 28 28 35 42 50 59 66 90 108 123 144 164 189 214 a. a. a. a. a. a. a. b. b. b. b. c. c. c. Dimensions : Millimeters NOTE: Feeder standard lengths is 3000mm Min. 500mm 2 ‘8-Series’ And ‘Y-Series’ Dimensions. Table 19.3 W-Dimensions PHASE 5W Width 230 NOTE: Conductor’ size are same. Additional duct & Plug-in BMC structure will be treated over one for ‘G-type’. so weight will be added that much. For more information contact us.
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지20 2.3.2 FLANGED END DIMENSIONS Flanged End Flanged end is a part connected to transformer or panel. Elbow-type is also available. W W 200 t B B 105 105 200 105 B 3.2t 200 3.2t 3.2t B Flange Flange Flange W t B t B B B t B Fig. 20.1 FLANGED END H 200 200 W W Fig. 20.2 200 H H W 25 W W 25 Fig. 20.3 W 25 Fig. 20.4 11 11 A Fig. 20.5 BAR WIDTH 55mm 11 14 A A Fig. 20.6 Fig. 20.7 BAR WIDTH 75 100mm BAR WIDTH 125 150mm 40 80 20 22 40 80 20 22 40 80 20 20 40 80 20 20 20 20 40 80 BUS BAR HOLE PATTERN (1 STACK, 2 STACKS, 3 STACKS ARE SAME, ALL HOLES ARE RECTANGULAR) 14 A A Fig. 20.8 A A A Fig. 20.9 BAR WIDTH 175 200mm BAR WIDTH 230 280mm Table 20.1 20 21 600 800 1,000 1,200 1,500 1,600 2,000 2,500 3,000 3,500 4,000 4,500 5,000 6,000 t 6 6 6 10 10 10 10 10 10 10 10 10 10 10 Dimensions(mm) tI W A 3 or 6 55 – 3 or 6 75 40 3 or 6 100 50 5 or 10 100 50 5 or 10 125 40 5 or 10 150 50 5 or 10 175 60 5 or 10 230 60 5 or 10 150x2 50 5 or 10 175x2 60 5 or 10 200x2 70 5 or 10 230x2 60 5 or 10 175x3 60 5 or 10 200x3 70 B 100 100 100 100 100 100 100 100 130 130 130 130 130 130 Flg. 20.2–2 0 .5 20.2–2 0 .6 20.2–2 0 .6 20.2–2 0 .6 20.2–2 0 .7 20.2–2 0 .7 20.2–2 0 .8 20.2–2 0 .9 20.3–2 0 .9 20.3–2 0 .7 20.3–2 0 .8 20.3–2 0 .9 20.4–2 0 .8 20.4–2 0 .8 Table 20.2 Rating in Amps(A) COPPER ALUMINUM Rating in Amps(A) 600 800 1,000 1,200 1,500 1,600 2,000 2,500 3,000 3,500 4,000 4,500 5,000 6,000 t 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Dimensions(mm) tI W A 3 or 6 55 – 3 or 6 55 – 3 or 6 75 40 3 or 6 100 50 3 or 6 125 40 3 or 6 150 50 3 or 6 175 60 3 or 6 125x2 40 3 or 6 150x2 50 3 or 6 175x2 60 3 or 6 200x2 70 3 or 6 150x3 50 3 or 6 175x3 60 3 or 6 200x3 70 B 100 100 100 100 100 100 100 130 130 130 130 130 130 130 Flg. 20.2–2 0 .5 20.2–2 0 .5 20.2–2 0 .6 20.2–2 0 .6 20.2–2 0 .7 20.2–2 0 .7 20.2–2 0 .8 20.3–2 0 .7 20.3–2 0 .7 20.3–2 0 .8 20.3–2 0 .8 20.4–2 0 .7 20.4–2 0 .8 20.4–2 0 .8
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지21 Flanged End Box Flanged end box is a part connected to transformer or panel. Elbow-type is also available. Min Min .:3 .:3 00 00 Min .:3 00 L L H L B A 200 A 20 40 70 80 A D L 270 B B A D C D C C Fig. 21.1 Fig. 21.2 Fig. 21.3 * Elastic Band is Optionanl for GEN.BOX Fig. 21.4 W W 70 C Fig-17.3 GEN.BOX Fig. 21.5 Fig. 21.6 L 270 L 270 70 105 200 Flexible conductor 105 200 Elastic Band C Fig. 21.7 Fig. 21.8 Table 21 COPPER ALUMINUM Rating in Amps(A) 600 1200 1500 2000 2500 3000 3500 4000 4500 5000 6000 600 1200 1500 2000 2500 3000 3500 4000 4500 5000 6000 No. OF STACKS 1 1 1 2 2 2 3 3 1 1 2 2 2 3 3 3 A 310 385 440 535 635 695 785 860 310 385 485 535 635 710 785 860 B 260 335 390 243x2 293x2 323x2 245x3 270x3 260 335 218x2 243x2 293x2 220x3 245x3 270x3 3 W (mm) C 450 450 450 510 510 510 510 510 450 450 510 510 510 510 510 510 D 200x2 200x2 200x2 230x2 230x2 230x2 230x2 230x2 200x2 200x2 230x2 230x2 230x2 230x2 230x2 230x2 Note: refer to page 20 for flanged end and busbar hole pattern L 270 270 270 270 270 270 270 270 270 270 270 270 270 270 270 270 A 310 385 440 535 635 695 785 860 310 385 485 535 635 710 785 860 Dimensions(mm) 4 W (mm) B C D 260 550 250x2 335 550 250x2 390 550 250x2 243x2 640 295x2 293x2 640 295x2 323x2 640 295x2 245x3 640 295x2 270x3 640 295x2 260 550 250x2 335 550 250x2 218x2 640 295x2 243x2 640 295x2 293x2 640 295x2 220x3 640 295x2 245x3 640 295x2 270x3 640 295x2 L 270 270 270 270 270 270 270 270 270 270 270 270 270 270 270 270 A 310 385 440 535 635 695 785 860 310 385 485 535 635 710 785 860 B 260 335 390 243x2 293x2 323x2 245x3 270x3 260 335 218x2 243x2 293x2 220x3 245x3 270x3 5 W (mm) C D 650 300x2 650 300x2 650 300x2 770 360x2 770 360x2 770 360x2 770 360x2 770 360x2 650 300x2 650 300x2 770 360x2 770 360x2 770 360x2 770 360x2 770 360x2 770 360x2 L 270 270 270 270 270 270 270 270 270 270 270 270 270 270 270 270
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지22 Cutout and drilling pattern for flanged end D A D D D B D B A B D A OPENING CUTOUT C C C Fig. 22.1 C C Fig. 22.2 C Fig. 22.3 Table 22 COPPER ALUMINUM Rating in Amps (A) 22 23 600 800 1000 1200 1500 1600 2000 2500 3000 3500 4000 4500 5000 6000 600 800 1000 1200 1500 1600 2000 2500 3000 3500 4000 4500 5000 6000 Dimensions(mm) A 3-W 240 240 240 240 240 240 240 240 300 300 300 300 300 300 240 240 240 240 240 240 240 240 300 300 300 300 300 300 4-W 340 340 340 340 340 340 340 340 430 430 430 430 430 430 340 340 340 340 340 340 340 430 430 430 430 430 430 430 B 115 135 160 160 185 210 235 290 385 435 485 545 635 710 115 115 135 160 185 210 235 335 385 435 485 560 635 710 3-W 135 135 135 135 135 135 135 135 165 165 165 165 165 165 135 135 135 135 135 135 135 165 165 165 165 165 165 165 C 4-W 185 185 185 185 185 185 185 185 230 230 230 230 230 230 185 185 185 185 185 185 185 230 230 230 230 230 230 230 5-W 235 235 235 235 235 235 235 235 295 295 295 295 295 295 235 235 235 235 235 235 235 295 295 295 295 295 295 295 D 145 165 190 190 215 240 265 320 208 233 258 288 222 247 145 145 165 190 215 240 265 183 208 238 258 197 222 247 Fig. 22.1 22.1 22.1 22.1 22.1 22.1 22.1 22.1 22.2 22.2 22.2 22.2 22.3 22.3 22.1 22.1 22.1 22.1 22.1 22.1 22.1 22.2 22.2 22.2 22.2 22.3 22.3 22.3
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지23 2.3.3 Physical Data for Fittings Fittings Forward LSC Bus Duct has complete ranges which fit to all the lay-out conditions. The other special parts than 90 angle are also available. Designation methods related to turning are specified in Fig.x on the basis of source side and load side. Off set and combination elbow will be applied only when standard elbow is not applied. Upward Source Side Load Side Downward Rearward Fig. 23.1 Elbow-Fittings Dimensions : mm Upward AMP. Rating(A) Forward Standard Downward Max. Horizontal. Elbows(Edgewise) Min. Fig. 23.2 Rearward Vertical. Elbows(Flatwise) Fig. 23.3 600 2500 3000 4000 4500 6000 600 2500 3000 4000 4500 6000 600 2500 3000 4000 4500 6000 Table 23.1 Hor. Elbow X Y 500 500 500 500 500 500 1000 1000 1000 1000 1000 1000 300 300 300 300 300 300 Ver. Elbow X Y 500 500 600 600 700 700 2000 2000 2000 2000 2000 2000 400 400 500 500 600 600 * Angel Elbows are available 75 179 turning. Tee-Fittings Dimensions : mm AMP. Rating(A) Standard Horizontal. Tee(Edgewise) Fig. 23.4 Max. Vertical. Tee(Flatwise) Fig. 23.5 Min. 600 2500 3000 4000 4500(AL) 4500 6000 600 2500 3000 4000 4500(AL) 4500 6000 600 2500 3000 4000 4500(AL) 4500 6000 Table 23.2 Hor. Tee X Y Z 500 500 500 600 600 600 600 600 600 – – – 1000 1000 1000 1000 1000 1000 1000 1000 1000 – – – 500 500 300 600 600 300 600 600 300 – – – Ver. Tee X Y Z 500 500 500 600 600 600 700 700 700 700 700 700 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 400 400 400 500 500 500 600 600 600 600 600 600
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지24 Offset Fittings Dimensions : mm AMP. Rating(A) Foreward Standard Downward Max. Horizontal. Offset Vertical. Offset Fig. 24.1 Fig. 24.2 Min. 600 2500 3000 4000 4500 6000 600 2500 3000 4000 4500 6000 600 2500 3000 4000 4500 6000 Table 24.1 Hor. Offset Ver. Offset X Y Z X Y Z 500 500 500 500 500 500 500 500 500 600 600 600 500 500 500 700 700 700 1000 500 1000 1000 1000 1000 1000 500 1000 1000 1000 1000 1000 500 1000 1000 1000 1000 300 250 300 400 500 400 300 250 300 400 500 400 300 250 300 600 500 600 Combination Elbow Fittings Upward Rearward Combination Elbow (For-ward Up-ward) Combination Elbow (Down-ward Rear-ward) Fig. 24.3 Fig. 24.4 *Note: All the direction is available. 1. For-ward Up-ward 2. For-ward Down-ward 3. Rear-ward Up-ward 4. Rear-ward Down-ward 5. Down-ward Rear-ward 6. Down-ward For-ward 7. Up-ward Rear-ward 8. Up-ward For-ward Refer Elbow fittings for Dimensions. Reducer This Fitting is used to economical engineering system. Another ratings are produced per costomer’s request. Dimensions : mm AMP. Rating(A) Fig. 24.5 Primary 1000 1500 2000 2500 3000 4000 Secondary 600 800 800 1200 1200 1600 1500 2000 2000 2500 3000 2500 Table 24.2 AMP. Rating(A) X Standard : 1000 Min : 700 Max : 2000 Expansion This Fitting is designed to absorb 25mm longitudinal expansion. In straight run it is recommended to install this section every 40 meters. Dimensions : mm POLE 3 4 Fig. 24.6 24 25 AMP. Rating(A) 600 2000 2500 6000 600 2000 2500 6000 Table 24.3 AMP. Rating(A) X 280 300 340 370 Y 1500
BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지25 Feed-in box Feed-in box is a part used for connection to cable by diverging at the end of Bus Duct. Min .:3 00 Min .:3 00 Min .:3 L 00 L L B B B A A A Fig. 25.1 Fig. 25.2 Fig. 25.3 Table 25 COPPER ALUMINUM AMPERE RATINGS (A) 600 800 1000 1200 1500 1600 2000 2500 3000 3500 4000 4500 5000 6000 600 800 1000 1200 1500 1600 2000 2500 3000 3500 4000 4500 5000 6000 No. OF STACKS 1 1 1 1 1 1 1 2 2 2 2 3 3 1 1 1 1 1 1 2 2 2 3 3 3 A 350 350 3
lsc bus duct system 1. introduction 3 1.1 general specifications 1.2 outstanding feature of lsc bus duct 1.3 cataloging 2. high power distribution (600a 6000a) 9 2.1 general specifications 2.1.1 i-series bus duct 2.1.2 8-series bus duct 2.1.3 f-series bus duct 2.1.4 y-series bus duct 2.2 grounding & ip degree 2.2.1 grounding 2.2.2 ip degree 2.3 .
bus duct section 23a has inner joint covers identical to the inner joint covers 48 and 4 on the bus duct section 20. This construction and arrangement can be readily observed in FIGURE 8, where a bus duct section 120 identical to the bus duct sections 20 and 23a is fully shown. The bus duct section 20 contains three bus bars 47, 43,
MEDIUM POWER DISTRIBUTION (100A 400A) 45 3.1 M-SERIES (MINI BUS DUCT) 3.2 B-SERIES (BABY BUS DUCT) 4. AIR INSULATED BUS DUCT 51 4.1 A-SERIES (LOW VOLTAGE) 4.2 H-SERIES (HIGH VOLTAGE) BUSDUCT최종(P) 2006.2.13 1:33 PM 페이지3. 1. INTRODUCTION . other method of low voltage power distribution. While material costs may be slightly higher, the .
dari beberapa bus duct, maka pengujian berkali-kali tidak dilakukan lagi. Untuk 120 % dari 2 kali rating tegangan bus duct ditambah 100 V untuk 1 det.ik adalah bus duct yang baik. 3. ANALISA Sistem bus duct sebagai distribusi listrik gedung pada dasarnya menggunakan tegangan 600 V kebawah. Disini dike-
installed as described in the TDC or TDF addendum to the SMACNA Duct Construction Standards except the corners may not be bolted. Standard 5" metal clips may be used with spacing as shown in diagram. SLEEVE DUCT TYPICAL TDC/TDF JOINT DUCT 60" Duct 3 REQ'D. 48" Duct 3 REQ'D. 36" Duct 3 REQ'D. 24" Duct 2 REQ'D. 18" DUCT and .
lsc recieving floor scale 01-03 plt-md gse 350 964836 7j 06/29/2020 rej lsc can recieving floor scale 01-03 plt- md gse 350 994723 7j 06/29/2020 crt 00114550 - brink asphalt & paving 4400 n 24th quincy, il 62305 t: 217.223.2170 store id: lsc aggregate hopper 01-46 ahp-lg a&&d ad 4323 c7316823 7u 06/20/2019 crt lsc rap scale hopper 01-36 aph-md .
Work with the LSC Webmaster to ensure website reflects the LSC’s diversity, mission, and goals through stated DEI mission and diverse imagery. Imbed diversity, equity, and inclusion into existing LSC structure and programming. Keep Zone DEI Coordinator up-to-date with term da
IMPERIAL MANUFACTURING GROUP INC. / GALVANIZED DUCT, PIPE & FITTINGS PAGE 5 Galvanized Duct, Pipe & Fittings IMG DIMENSION / UNIT STD . STD . RACK UPC SKUDESCRIPTION MSRPKG QTYQTYCODE Stack Duct - 30 Gauge GV1306 2-1/4" x 10" x 24" Stack Duct 30ga /ft . 12' Ctn - 063467112839 GV1318 2-1/4" x 12" x 24" Stack Duct 30ga /ft .
sebuah standar akuntansi untuk lembaga keuangan syariah yang disebut accounting, auditing, and governance standard for Islamic institution. 3. Perkembangan Akuntansi di Indonesia (IAI) Ketika Indonesia merdeka, hanya ada satu orang akuntan pribumi, yaitu Prof. Dr. Abutari, sedangkan Prof. Soemardjo lulus pendidikan akuntan di
