PLASMA CUTTING - Kestra Rec-Man
PLASMA CUTTINGThe new series of Torcheswithout High Frequency 25TM-125Higher performancesCleaner cutFaster speedTEC.MO. s.r.l. Via Rio Fabbiani 8 - 40067 RASTIGNANO - BOLOGNA - ITALY E-mail: tecmo@tecmo.it
plasma cutting torches2017-09-A-PTPT-20CTechnical DataMax Current :Duty Cycle:Gas:Gas Pressure:Gas Flow:Pilot :Ignition:10-25 Amps25 Amps 35%Air/N230 psi (2 bar)65 scfh (30 lpm)Electrode to TipWithout HFIEC 60974-72SIZE A1a1634SIZE B4578Back Striking2
plasma cutting torchesAir or N2Standard LayoutAir FilterAT-10002017-09-A-PTPT-20CReplacement PartsTorch partsItemDescription1PT-20C Hand Torch Head1aO-Ring2Handle with parts3Electrode, Back Striking4Swirl ring5Tip, Contact Cutting, ø 0.65, 10-20A, Back StrikingTip, Contact Cutting, ø 0.8, 20-30A, Back Striking6Extended Electrode, Back Striking7Extended Tip, Contact Cutting, ø 0.65, 10-20A, Back StrikingExtended Tip, Contact Cutting, ø 0.8, 20-30A, Back Striking8Retaining Cap, 1 holeRetaining Cap, 2 holesN/SWrench for rches and LeadsA PT-20C Hand Torch, 4m (12.5 ft) Leads, Coaxial CablePT-20C Lead Assembly, Hand, 4m (12.5 ft) Length, Coaxial CableB PT-20C Hand Torch, 4m (12.5 ft) Leads, Coaxial CablePT-20C Lead Assembly, Hand, 4m (12.5 ft) Length, Coaxial scriptionN/SCircle Cutting AttachmentCode51866ConnectionEuro ConnectorEASYFITConnectionTorches with different cable coversand connectors available on request.3
plasma cutting torches2017-09-A-PTPT-25CTechnical DataCurrent :Duty Cycle:Gas:Gas Pressure:Gas Flow:Pilot :Ignition:10-25 Amps25 Amps 60%Air/N240 psi (2.8 bar)85 scfh (40 lpm)Electrode to TipWithout HFIEC 60974-72SIZE A1a1364SIZE B4578Back Striking4
plasma cutting torchesAir or N2Standard LayoutAir FilterAT-10002017-09-A-PTPT-25CReplacementTorch partsItemDescription1PT-25C Hand Torch Head1aO-Ring2Handle with parts3Electrode, Back Striking4Swirl ring5Tip, Contact Cutting, ø 0.65, 10-20A, Back StrikingTip, Contact Cutting, ø 0.8, 20-30A, Back Striking6Extended Electrode, Back Striking7Extended Tip, Contact Cutting, ø 0.65, 10-20A, Back StrikingExtended Tip, Contact Cutting, ø 0.8, 20-30A, Back Striking8Retaining Cap, 1 holeRetaining Cap, 2 holesRetaining Cap, 4 holesN/SWrench for 60368Torches and LeadsA PT-25C Hand Torch, 4m (12.5 ft) Leads, Coaxial CablePT-25C Lead Assembly, Hand, 4m (12.5 ft) Length, Coaxial CableB PT-25C Hand Torch, 4m (12.5 ft) Leads, Coaxial CablePT-25C Lead Assembly, Hand, 4m (12.5 ft) Length, Coaxial scriptionN/SCircle Cutting AttachmentCode51866ConnectionEuro ConnectorEASYFITConnectionTorches with different cable coversand connectors available on request.5
plasma cutting torches2017-09-A-PTPT-40Technical DataCurrent :Duty Cycle:Gas:Gas Pressure:Gas Flow:Pilot :Ignition:10-40 Amps40 Amps 60%Air/N265-75 psi (4.4-5.0 bar)320 scfh (150 lpm)Electrode to Tip (18-22A)Without HFFor the correct operation please use:3-Ways Solenoid Valve, inside orifice2.3-2.7mm - (0.090-0.106 inches)2IEC 60974-71a1SIZE A384344SIZE B56711910111/4-G1314Back Striking12615
plasma cutting torchesAir or N2Standard LayoutAir FilterAT-1000ConnectionEuro ment PartsTorch partsItemDescription1PT-40 Hand Torch Head1aO-Ring2Handle with parts3Electrode, Back Striking4Swirl ring5Tip, Contact Cutting, ø 0.65, 10-20A, Back StrikingTip, Contact Cutting, ø 0.8, 20-30A, Back StrikingTip, Contact Cutting, ø 0.9, 30-40A, Back Striking6Tip, Contact Cutting, ø 0.9, 30-40A, Back Striking7Flat Tip, Cutting, ø 0.9, 30-40A, Back StrikingFlat Tip, Cutting, ø 1.0, 40-50A, Back Striking8Extended Electrode, Back Striking9Extended Tip, Contact Cutting, ø 0.65, 10-20A, Back StrikingExtended Tip, Contact Cutting, ø 0.8, 20-30A, Back Striking10Extended Tip, Contact Cutting, ø 0.9, 30-40A, Back Striking11Retaining Cap, 6 holesRetaining Cap, 6 holes, Maximum Life12Double Pointed Spacer (for use with item 5 and 7 only)N/SWrench for s and LeadsA PT-40 Hand Torch, 4m (12.5 ft) Leads, Coaxial CablePT-40 Hand Torch, 6m (20 ft) Leads, Coaxial CablePT-40 Lead Assembly, Hand, 4m (12.5 ft) Length, Coaxial CablePT-40 Lead Assembly, Hand, 6m (20 ft) Length, Coaxial CableB PT-40 Hand Torch, 4m (12.5 ft) Leads, Coaxial CablePT-40 Hand Torch, 6m (20 ft) Leads, Coaxial CablePT-40 Lead Assembly, Hand, 4m (12.5 ft) Length, Coaxial CablePT-40 Lead Assembly, Hand, 6m (20 ft) Length, Coaxial 87CX09688CXAccessoriesItemDescription13Contact Tip, ø 0.9, 30-40A, Back StrikingContact Tip, ø 1.0, 40-50A, Back Striking14Shield Cup Body15Shield Cap, 80Circle Cutting AttachmentBEVEL TOOLBevel ToolPatent pending16Torches with different cable coversand connectors available on request.7
plasma cutting torches2017-09-A-PTPT-60Technical DataCurrent :Duty Cycle:Gas:Gas Pressure:Gas Flow:Pilot :Ignition:10-60 Amps60 Amps 80%Air/N265-75 psi (4.4-5.0 bar)320 scfh (150 lpm)Electrode to Tip (18-22A)Without HFFor the correct operation please use:3-Ways Solenoid Valve, inside orifice2.3-2.7mm - (0.090-0.106 inches)2IEC 60974-71a183384546711941011134161417Back Striking1281518
plasma cutting torchesAir or N2Standard LayoutAir FilterAT-1000StandardConnectionEuro ConnectorEASYFITConnectionPT-60Replacement PartsTorch partsItemDescription1PT-60 Hand Torch Head1aO-Ring2Handle with parts3Electrode, Back Striking4Swirl ring5Tip, Contact Cutting, ø 0.65, 10-20A, Back StrikingTip, Contact Cutting, ø 0.8, 20-30A, Back StrikingTip, Contact Cutting, ø 0.9, 30-40A, Back Striking6Tip, Contact Cutting, ø 0.9, 30-40A, Back Striking7Flat Tip, Cutting, ø 1.0, 40-50A, Back StrikingFlat Tip, Cutting, ø 1.1, 50-60A, Back Striking8Extended Electrode, Back Striking9Extended Tip, Contact Cutting, ø 0.65, 10-20A, Back StrikingExtended Tip, Contact Cutting, ø 0.8, 20-30A, Back Striking10Extended Tip, Contact Cutting, ø 0.9, 30-40A, Back Striking11Retaining Cap, 6 holesRetaining Cap, 6 holes, Maximum Life12Double Pointed Spacer (for use with item 5 and 7 only)Wrench for ches and LeadsPT-60 Hand Torch, 6m (20 ft) Leads, Coaxial CablePT-60 Lead Assembly, Hand, 6m (20 ft) Length, Coaxial tact Tip, ø 0.9, 30-40A, Back StrikingContact Tip, ø 1.0, 40-50A, Back StrikingContact Tip, ø 1.1, 50-60A, Back Striking14Shield Cup Body15Shield Cap, 18Bevel Tool2017-09-A-PTN/S19Extended Shielded Tip, ø 0.9, 40A, Back StrikingExtended Shielded Tip, ø 1.0, 50A, Back StrikingExtended Shielded Tip, ø 1.1, 60A, Back StrikingShield Cup BodyExtended Shield Cap ircle Cutting AttachmentBEVEL TOOL5186651880Patent pending19Torches with different cable coversand connectors available on request.9
plasma cutting torches2017-09-A-PTPTM-60Technical DataCurrent :Duty Cycle:Gas:Gas Pressure:Gas Flow:Pilot :Ignition:10-60 Amps60 Amps 80%Air/N265-75 psi (4.4-5.0 bar)320 scfh (150 lpm)Electrode to Tip (18-22A)Without HFFor the correct operation please use:3-Ways Solenoid Valve, inside orifice2.3-2.7mm - (0.090-0.106 inches)IEC 60974-71121831a495610710Back Striking
plasma cutting torchesAir or N2Standard LayoutAir FilterAT-10002017-09-A-PTPTM-60Replacement PartsTorch partsItemDescription1PTM-60 Machine Torch Head1aO-RingFiberglass Positioning Tube23Electrode, Back Striking4Swirl ring5Tip, Contact Cutting, ø 0.65, 10-20A, Back StrikingTip, Contact Cutting, ø 0.8, 20-30A, Back StrikingTip, Contact Cutting, ø 0.9, 30-40A, Back Striking6Flat Tip, Cutting, ø 1.0, 40-50A, Back StrikingFlat Tip, Cutting, ø 1.1, 50-60A, Back Striking7Retaining Cap, 6 holesRetaining Cap, 6 holes, Maximum LifeN/SWrench for orches and LeadsPTM-60 Machine Torch, 6m (20 ft) Leads, Coaxial CablePTM-60 Lead Assembly,Machine, 6m (20 ft) Length, Coaxial ionEuro ConnectorEASYFITConnection910DescriptionContact Tip, ø 0.9, 30-40A, Back StrikingContact Tip, ø 1.0, 40-50A, Back StrikingContact Tip, ø 1.1, 50-60A, Back StrikingShield Cup BodyShield Cap, 1Fiberglass Positioning Tube with Rack07219Torches with different cable coversand connectors available on request.11
plasma cutting torches2017-09-A-PTPT-80Technical DataCurrent :Duty Cycle:Gas:Gas Pressure:Gas Flow:Pilot :Ignition:30-80 Amps80 Amps 60%Air/N265-75 psi (4.4-5.0 bar)340 scfh (160 lpm)Electrode to Tip (18-22A)Without HFFor the correct operation please use:3-Ways Solenoid Valve, inside orifice2.7-3.0 mm - (0.106-0.118 inches)IEC 60974-721aBack Striking11b14*3446597101112815*11131116** While stockslast12
plasma cutting torchesAir or N2Standard LayoutAir FilterAT-1000StandardConnectionEuro ment PartsTorch partsItemDescription1PT-80 Hand Torch HeadO-Ring1aCooling Tube1b2Handle with partsElectrode, Back Striking34Swirl ring5Tip, Contact Cutting, ø 0.9, 30-40A, Back Striking6Tip, Cutting, ø 1.0, 40-50A, Back StrikingTip, Cutting, ø 1.1, 50-60A, Back StrikingTip, Cutting, ø 1.2, 60-70A, Back StrikingTip, Cutting, ø 1.3, 70-80A, Back StrikingRetaining Cap78Double Pointed Spacer (for use with item 6 only)Wrench for 3460368Torches and LeadsPT-80 Hand Torch, 6m (20 ft) Leads, Coaxial CablePT-80 Hand Torch, 12m (40 ft) Leads, Coaxial CablePT-80 Lead Assembly, Hand, 6m (20 ft) Length, Coaxial CablePT-80 Lead Assembly, Hand, 12m (40 ft) Length, Coaxial scription9Contact Tip, ø 1.0, 40-50A, Back StrikingContact Tip, ø 1.1, 50-60A, Back StrikingContact Tip, ø 1.2, 60-70A, Back StrikingContact Tip, ø 1.3, 70-80A, Back Striking10Tip, Gouging, 80A, Back Striking11Shield Cup Body12Shield Cap, Hand13Shield Cap, 11G.1660511605046050814*15*16*Extended ElectrodeExtended Shielded Tip, ø 1.0, 40-50AExtended Shielded Tip, ø 1.1, 50-60AExtended Shielded Tip, ø 1.2, 60-70AExtended Shielded Tip, ø 1.3, 70-80AExtended Shield Cap, 4LN/S17Circle Cutting AttachmentBEVEL TOOL5185351880Bevel ToolPatent pending17Torches with different cable coversand connectors available on request.13
plasma cutting torches2017-09-A-PTPTM-80Technical DataCurrent :Duty Cycle:Gas:Gas Pressure:Gas Flow:Pilot :Ignition:40-80 Amps80 Amps 60%Air/N265-75 psi (4.4-5.0 bar)340 scfh (160 lpm)Electrode to Tip (18-22A)Without HFFor the correct operation please use:3-Ways Solenoid Valve, inside orifice2.7-3.0mm - (0.106-0.118 inches)IEC 60974-721011a71b384Back Striking59614
plasma cutting torchesAir or N2Standard LayoutAir FilterAT-1000StandardConnectionEuro ement PartsTorch partsItemDescription1PTM-80 Machine Torch Head1aO-Ring1bCooling Tube2Fiberglass Positioning Tube3Electrode, Back Striking4Swirl ring5Tip, Cutting, ø 1.0, 40-50A, Back StrikingTip, Cutting, ø 1.1, 50-60A, Back StrikingTip, Cutting, ø 1.2, 60-70A, Back StrikingTip, Cutting, ø 1.3, 70-80A, Back Striking6Retaining CapN/SWrench for 1311.1051311.1151311.1251311.136051060368Torches and LeadsPTM-80 180 Machine Torch, 6m (20 ft) Leads, Coaxial CablePTM-80 180 Machine Torch, 12m (40 ft) Leads, Coaxial CablePTM-80 180 Lead Assembly, 6m (20 ft) Length, Coaxial CablePTM-80 180 Lead Assembly, 12m (40 ft) Length, Coaxial scription7Contact Tip, ø 1.0, 40-50A, Back StrikingContact Tip, ø 1.1, 50-60A, Back StrikingContact Tip, ø 1.2, 60-70A, Back StrikingContact Tip, ø 1.3, 70-80A, Back Striking8Shield Cup Body9Shield Cap, 11605061007219Fiberglass Positioning Tube with RackTorches with different cable coversand connectors available on request.15
plasma cutting torches2017-09-A-PTPT-100Technical DataCurrent :Duty Cycle:Gas:Gas Pressure:Gas Flow:Pilot :Ignition:30-100 Amps100 Amps60%Air/N270-80 psi (4.8-5.5 bar)510 scfh (240 lpm)Electrode to Tip (18-22A)Without HFFor the correct operation please use:3-Ways Solenoid Valve, inside orifice3.5-4.0mm - (0.138-0.157 inches)IEC 60974-721aBack 70A15181780A100A100A2230A70A2380A100A
plasma cutting torchesAir or N2Standard LayoutAir FilterAT-1000StandardConnectionEuro ConnectorEASYFITConnectionTorch partsItemDescription1PT-100 Hand Torch Head1aO-RingCooling Tube1b2Handle with parts3Electrode, Back Striking4Swirl ring, 30-70A5Swirl ring, 80-100A and Gouging6Tip, Contact Cutting, ø 0.9, 30-40A, Back Striking7Tip, Cutting, ø 1.0, 40-50A, Back StrikingTip, Cutting, ø 1.1, 50-60A, Back StrikingTip, Cutting, ø 1.2, 60-70A, Back Striking8Tip, Cutting, ø 1.4, 80-90A, Back StrikingTip, Cutting, ø 1.5, 100A, Back Striking9Retaining Cap, 30-70A10Retaining Cap, 80-100ADouble Pointed Spacer (for use with item. 7 and 8 only)11N/SWrench for 1560500605016044460368Torches and LeadsPT-100 Hand Torch, 6m (20 ft) Leads, Coaxial CablePT-100 Hand Torch, 12m (40 ft) Leads, Coaxial CablePT-100 Lead Assembly, Hand, 6m (20 ft) Length, Coaxial CablePT-100 Lead Assembly, Hand, 12m (40 ft) Length, Coaxial scription12Contact Tip, ø 1.0, 40-50A, Back StrikingContact Tip, ø 1.1, 50-60A, Back StrikingContact Tip, ø 1.2, 60-70A, Back Striking13Contact Tip, ø 1.4, 80-90A, Back StrikingContact Tip, ø 1.5, 100A, Back Striking14Tip, Gouging, 100A, Back Striking15Shield Cup Body16Shield Cap, Hand, 40-70A17Shield Cap, Hand, 80-100A18Shield Cap, 551278G.226050260504605056050821Patent pending24PT-100Replacement Parts1920Bevel Tool2017-09-A-PT2223N/S24Extended ElectrodeExtended Shielded Tip, ø 1.0, 40-50A,Extended Shielded Tip, ø 1.1, 50-60A,Extended Shielded Tip, ø 1.2, 60-70A,Extended Shielded Tip, ø 1.4, 80-90A,Extended Shielded Tip, ø 1.5, 100A,Extended Shielded Cap, Hand, 40-70AExtended Shielded Cap, Hand, 1278L.1560504L60505LCircle Cutting AttachmentBEVEL TOOL5186451887Torches with different cable coversand connectors available on request.17
plasma cutting torches2017-09-A-PTPTM-100Technical DataCurrent :Duty Cycle:Gas:Gas Pressure:Gas Flow:Pilot :Ignition:30-100 Amps100 Amps60%Air/N270-80 psi (4.8-5.5 bar)510 scfh (240 lpm)Electrode to Tip (18-22A)Without HFFor the correct operation please use:3-Ways Solenoid Valve, inside orifice3.5-4.0mm - (0.138-0.157 inches)IEC 60974-721411a4510111b3465127813918Back Striking
plasma cutting torchesAir or N2Standard LayoutAir FilterAT-1000StandardConnectionEuro Connector2017-09-A-PTPTM-100Replacement PartsTorch partsItemDescription1PTM-100 Machine Torch Head1aO-Ring1bCooling Tube2Fiberglass Positioning Tube3Electrode, Back Striking4Swirl ring, 30-70A5Swirl ring, 80-100A6Tip, Cutting, ø 1.0, 40-50A, Back StrikingTip, Cutting, ø 1.1, 50-60A, Back StrikingTip, Cutting, ø 1.2, 60-70A, Back Striking7Tip, Cutting, ø 1.4, 80-90A, Back StrikingTip, Cutting, ø 1.5, 100A, Back Striking8Retaining Cap, 30-70A9Retaining Cap, 80-100AWrench for 006050160368Torches and LeadsPTM-100 180 Machine Torch, 6m (20 ft) Leads, Coaxial CablePTM-100 180 Machine Torch, 12m (40 ft) Leads, Coaxial CablePTM-100 180 Lead Assembly, 6m (20 ft) Length, Coaxial CablePTM-100 180 Lead Assembly, 12m (40 ft) Length, Coaxial scription10Contact Tip, ø 1.0, 40-50A, Back StrikingContact Tip, ø 1.1, 50-60A, Back StrikingContact Tip, ø 1.2, 60-70A, Back Striking11Contact Tip, ø 1.4, 80-90A, Back StrikingContact Tip, ø 1.5, 100A, Back Striking12Shield Cup Body13Shield Cap, 560502605061407219Fiberglass Positioning Tube with RackEASYFITConnectionTorches with different cable coversand connectors available on request.19
plasma cutting torches2017-09-A-PTPT-105PlusReplacement PartsCurrent :Duty Cycle:Gas:Gas Pressure:Gas Flow:Pilot :Ignition:30-100 Amps100 Amps60%Air/N270-80 psi (4.8-5.5 bar)510 scfh (420 lpm)Electrode to Tip (18-22A)Without HFFor the correct operation please use:3-Ways Solenoid Valve, inside orifice3.5-4.0mm - (0.138-0.157 inches)IEC 60974-721a11bNEW3Patent Pending45678930A70A201080A100A
plasma cutting torchesAir or N2Standard LayoutAir FilterAT-1000PT-105PlusReplacement PartsTorch partsItemDescription1PT-105 Hand Torch Head1aO-RingCooling Tube, NEW1b2Handle with parts3Electrode4Swirl ring, 30-70A5Swirl ring, 80-100A6Tip, Cutting, 40ATip, Cutting, 60A7Tip, Cutting, 80ATip, Cutting, 100A8910N/SStandardConnectionEuro hield Cup BodyShield Cap, Hand, 30-70AShield Cap, Hand, 80-100A604996051460515Wrench for electrode60368Torches and LeadsPT-105 Hand Torch, 6m (20 ft) Leads, Coaxial CablePT-105 Hand Torch, 12m (40 ft) Leads, Coaxial CablePT-105 Lead Assembly, Hand, 6m (20 ft) Length, Coaxial CablePT-105 Lead Assembly, Hand, 12m (40 ft) Length, Coaxial cle Cutting Attachment11BEVEL TOOL5186551880EASYFITConnectionBevel ToolPatent pending11Torches with different cable coversand connectors available on request.21
plasma cutting torches2017-09-A-PTPTM-105PlusReplacement PartsCurrent :Duty Cycle:Gas:Gas Pressure:Gas Flow:Pilot :Ignition:30-100 Amps100 Amps60%Air/N270-80 psi (4.8-5.5 bar)510 scfh (240 lpm)Electrode to Tip (18-22A)Without HFNEWFor the correct operation please use:3-Ways Solenoid Valve, inside orifice3.5-4.0mm - (0.138-0.157 inches)IEC 60974-71b11Patent Pending32456718121a930A70A80A100ASHIELDED2210
plasma cutting torchesAir or N2Standard LayoutAir FilterAT-10002017-09-A-PTPTM-105PlusReplacement PartsTorch partsItemDescriptionPTM-105 Machine Torch Head11aO-Ring1bCooling Tube, NEW2Fiberglass Positioning Tube3Electrode4Swirl ring, 30-70A5Swirl ring, 80-100A6Tip, Cutting, 40ATip, Cutting, 60A7Tip, Cutting, 80ATip, Cutting, 100A8Shield Cup Body9Shield Cap, Machine, 30-70A10Shield Cap, Machine, N/S60368Wrench for electrodeTorches and LeadsPTM-105 180 Machine Torch, 6m (20 ft) Leads, Coaxial CablePTM-105 180 Machine Torch, 12m (40 ft) Leads, Coaxial CablePTM-105 180 Lead Assembly, 6m (20 ft) Length, Coaxial CablePTM-105 180 Lead Assembly, 12m (40 ft) Length, Coaxial CableStandardConnectionEuro Fiberglass Positioning Tube With Rack12Shield Cup Body, OHMIC0721960499HEASYFITConnectionTorches with different cable coversand connectors available on request.23
plasma cutting torches2017-09-A-PTTH-70Replacement PartsCurrent :Duty Cycle:Gas:Gas Pressure- Cutting:- Gouging:Gas Flow
14* IEC 60974-7 4 * While stocks last Back Striking. plasma cutting torches 2017-09-A-PT 13 PT-80 Replacement Parts Torch parts Item Description Code 1 PT-80 Hand Torch Head 09800 1a O-Ring 51620.60 1b Cooling Tube 09800.42 * * * plasma cutting torches 2017-09-
2.0 Smoothcut Plasma Cutters 8 2.1 Fundamentals of Plasma Cutting 8 2.2 Process operation 9 3.0 Plasma cutting components 10 3.1 Plasma cutting power sources 10 3.2 Plasma cutting capacity 10 3.3 Plasma cutting torches 10 3.4 Air supply 11 3.5 Process comparisons 11 3.6 Earth cable assembly 11 4.0 Cutting Technique 12 4.1 Cutting 12
2.0 MagMate Cut25 Plasma 6 2.1 Fundamentals of Plasma Cutting 6 2.2 Process operation for transferred arc applications 7 3.0 Plasma cutting components 8 3.1 Plasma cutting power sources 8 3.2 Plasma cutting capacity 8 3.3 Plasma cutting torches (general) 8 3.4 Air supply 9 3.5 Process comparisons 9 3.6 Work return cable assembly 9
Hardox and Weldox are easily cut by the plasma cutting process. Plasma cutting has a limitation when it comes to material thickness and the main thickness to be cut is below 50 mm (plasma cutting machine dependent). Ge-nerally features for plasma cutting can be seen in table 4. Tabel 4. General features for plasma cutting. Figure 7 shows .
While "thermal cutting" would include plasma cutting, "oxyfuel cutting" would not. In many, and perhaps most cases, the use of the more restrictive term "oxyfuel cutting" was not selected to exclude plasma cutting but rather identified only the older technology that was in use before plasma cutting existed or became popular.
CNC PLASMA CUTTING MACHINE 3000X1500MM CUTTING TABLE MODEL: FLASHCUT/AC200 Plasma cutting machine with a 3000x1500mm cutting table TECHNICAL DATA: Power Voltage: 220V/380V, 50HZ Effective Cutting Width (mm): 1500 Rail width(mm) 1800 Effective Cutting Length (mm):
Principle of plasma cutting Plasma cutting is a thermal cutting process in which a plasma arc is constricted through a nozzle. The transferred arc, which occurs when electricity flows from the non-melting electrode (cathode) to the workpiece (anode), is used to cut electrically conductive materials. This is the most commonly used form of plasma .
Plasma Etching Page 2 OUTLINE Introduction Plasma Etching Metrics – Isotropic, Anisotropic, Selectivity, Aspect Ratio, Etch Bias Plasma and Wet Etch Summary The Plasma State - Plasma composition, DC & RF Plasma Plasma Etching Processes - The principle of plasma etching, Etching Si and SiO2 with CF4
In the midst of Michel’s awakening to the sensuous, sensual existence, to the Dionysian world in nature and himself, he observes: [Marceline] led the way along a path so odd that I have never in any country seen its like. It meanders indolently between two fairly high mud walls; the shape of the gardens they enclose directs it leisurely course; sometimes it winds; sometimes it is broken; a .
