ELECTRICAL (EMC) - EMC Testing - EMC Test Lab - EMI Testing
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005CKC LABORATORIES, INC.110 North Olinda PlaceBrea, CA 92823Steve Behm Phone: 209 966 5240ELECTRICAL (EMC)Valid to: March 31, 2019Certificate Number: 0803.02In recognition of the successful completion of the A2LA evaluation process, accreditation is granted tothis laboratory to perform the following Emissions, Immunity, Wireless, and Military tests for electricalequipment:STANDARDDESCRIPTION OF STANDARDAUSTRALIA / NEW ZEALANDAS/NZS 61000-6-1Electromagnetic Compatibility (EMC) Generic standard - Immunity forresidential, commercial and light-industrial environmentsAS/NZS 61000-6-2Electromagnetic Compatibility (EMC) Generic standards immunity for industrialenvironmentsAS/NZS 61000-6-3:Electromagnetic Compatibility (EMC) Emission standard for residential,2012commercial and light-industrial environmentsAS/NZS 61000-6-4:Electromagnetic Compatibility (EMC) Emission standard for industrial2012environmentsAMCA Radiocommunications (Short Range Devices) Standard: 2014AS/NZS 4268Radio equipment and systems - Short range devices - Limits and methods ofmeasurementAS/NZS 4768.1Digital radio equipment operating in land mobile and fixed services bands in thefrequency range 29.7 MHz to 1 GHzAS/NZS CISPR 11:Industrial, Scientific and Medical (ISM) radio frequency equipment 2011Electromagnetic disturbance characteristics - Limits and methods ofmeasurementAS/NZS CISPR 14.1: Electromagnetic compatibility - Requirements for household appliances, electric2013tools and similar apparatus - Emission [excluding clicks]AS/NZS CISPR 14.2 Electromagnetic compatibility - Requirements for household appliances electrictools and similar apparatus - ImmunityAS/NZS CISPR 22:Information technology equipment - Radio disturbance characteristics - Limits2009 A1and methods of measurementAS/NZS CISPR 32Electromagnetic compatibility of multimedia equipment – EmissionRequirements(A2LA Cert. No. 0803.02) Revised 05/18/2017Page 1 of 16
BETS-9ICES 001ICES 003ICES 004ICES 005ICES TION OF STANDARDTechnical standards and requirements for low power announce transmitters inthe frequency bands (525 to 1705) kHz and (88 to 107.5) MHzTechnical standards and requirements for television broadcasting transmittersTechnical standards and requirements for AM broadcasting transmittersTechnical standards and requirements for FM broadcasting transmittersTechnical standards and requirements for radio apparatus capable of receivingbroadcastingTechnical standards and requirements for FM transmitters operating in smallremote communitiesTechnical standards and requirements for television transmitters operating insmall remote communitiesIndustrial, Scientific and Medical (ISM) radio frequency generatorsInformation Technology Equipment (ITE) - Limits and methods of measurementAlternating current high voltage power systemsRadio frequency lighting devicesAC wire carrier current devices (unintentional radiators)Evaluation procedure for mobile and portable radio transmitters with respect tohealth Canada's safety code 6 for exposure of humans to radio frequency fields[except SAR]Broadband public safety equipment operating in the band (4940 to 4990) MHzLand mobile and fixed equipment operating in the band (1670 to 1675) MHzLand and coast station transmitters using A1, A2, A3, A2H, or A3H emissionsoperating in the (200 to 535) kHz bandLand mobile and fixed radio transmitters and receivers (27.41 to 960) MHzLow power licensed radio communication devicesLand mobile and fixed radio transmitters and receivers (1.705 to 50.0) MHz,primarily amplitude modulatedAir-Ground equipment operating in the bands (849 to 851) MHz and(894 to 896) MHzMobile Broadband Services (MBS) Equipment Operating in the FrequencyBands (698 to 756) MHz and (777 to 787) MHzZone enhancers for the land mobile service800 MHz Cellular telephones employing new technologies2 GHz Personal communication services900 MHz Narrowband personal communications servicesDigital scanner receiversLocation and monitoring service (902 to 928) MHzAdvanced wireless services equipment operating in the bands(1710 to 1755) MHz and (2110 to 2155) MHzAeronautical radio communication equipment in the frequency band(117.975 to 137) MHzNarrowband multipoint communication systems in the (1427 to 1430) MHz and(1493.5 to 1496.5) MHz bandsSatellite mobile earth stationsCoast and ship station single sideband radiotelephone transmitters and receiversoperating in the (1605 to 28000) kHz band(A2LA Cert. No. 0803.02) Revised 05/18/2017Page 2 of 16
STANDARDCANADA -251RSS-287RSS-288RSS-310RSS-GENDESCRIPTION OF STANDARDMaritime radio transmitters and receivers in the band (156 to 162.5) MHzLocal multipoint communication systems in the 28 GHz band, point-to-point andpoint-to-multipoint broadband communication systems in the (24 to 38) GHzbandsFixed wireless access equipment operating in the band (3450 to 3650) MHzFixed wireless access equipment operating in the band (953 to 960) MHzWireless communications service equipment operating in the bands(2305 to 2320) MHz and (2345 to 2360) MHzPoint-to-multipoint broadband equipment operating in the bands(512 to 608) MHz and (614 to 698) MHz for rural remote broadband systems(RRBS) (TV Channels 21 to 51)Wireless broadband access equipment operating in the band(3650 to 3700) MHzBroadband radio service (BRS) equipment operating in the band(2500 to 2690) MHzLow power license exempt radio communication devices (All frequency bands)Level Probing Radar Equipment2 GHz License exempt personal communications service devices (PCS)Analogue scanner receiversWireless Power Transfer Devices (Wireless Chargers)Devices using ultra-wideband (UWB) technologyWhite Spaces Devices (WSDs)General radio service equipment operating in the band (26.960 to 27.410) MHzShipborne Radar in the (2,900 to 3,100) MHz and (9,225 to 9,500) MHz BandsActive medical implant communications system devices in the band(402 to 405) MHzMedical Devices Operating in the Band 413-457 MHzDigital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs), andLicense-Exempt Local Area Network (LE-LAN) DevicesField disturbance sensors in the bands 46.7-46.9 GHz and 76-77 GHzEmergency position indicating radio beacons (EPIRB), emergency locatortransmitters (ELT), personal locator beacons (PLB), and maritime survivorlocator devices (MSLD)Global maritime distress and safety system (GMDSS)Low-power license exempt radio communication devices (all frequency bands)category II equipmentGeneral requirements and information for the certification of radiocommunication equipment(A2LA Cert. No. 0803.02) Revised 05/18/2017Page 3 of 16
STANDARDDESCRIPTION OF STANDARDEUROPEAN UNIONEN 12015Electromagnetic compatibility - Product family standard for lifts, escalators andpassenger conveyors – emissionEN 12016Electromagnetic compatibility - Product family standard For lifts, escalators andpassenger conveyors – immunityEN 12184Electrically powered wheelchairs, scooters and their chargers - requirements andtest methods [Section 9.8 Only]EN 13763-26Explosives for civil uses – Detonators and relays – Part 26EN 50065-1Specification for signaling on low-voltage electrical installations in thefrequency range (3 to 148.5) kHz - Part 1 General requirements, frequency bandsand electromagnetic disturbancesEN 50065-2-1, 2, 3Specification for signaling on low-voltage electrical installations in thefrequency range (3 kHz to 148.5) kHz - Part 2 Immunity requirements for mainscommunications equipment and systems operating in the range of frequencies(95 to 1485) kHzEN 50083-2Cable networks for television signals, sound signals and interactive services Part 2 Electromagnetic compatibility for equipmentEN 50121-1Railway applications - Electromagnetic compatibility - Part 1 GeneralEN 50121-3-2Railway applications - Electromagnetic compatibility - Part 3-2 Rolling stock apparatusEN 50121-4Railway applications - Electromagnetic compatibility - Part 4 Emission andimmunity of the signalling and telecommunications apparatusEN 50130-4Alarm systems - Part 4 Electromagnetic compatibility - Product family standard- Immunity requirements for components of fire, intruder and social alarmsystemsENV 50204Radiated electromagnetic field from digital radio telephones - immunity test(900MHz, 5MHz Keyed Carrier)EN 50270Electromagnetic compatibility - Electrical apparatus for the detection andmeasurement of combustible gases, toxic gases or oxygenEN 50370-1Electromagnetic compatibility (EMC) - Product family standard for machinetools - Part 1 Emissions.EN 50370-2Electromagnetic compatibility (EMC) - Product family standard for machinetools - Part 2 ImmunityEN 55011Industrial, scientific and medical (ISM) radio-frequency equipment - Radiodisturbance characteristics - Limits and methods of measurementEN 55013Sound and television broadcast receivers and associated equipment - Radiodisturbance characteristics - Limits and methods of measurementEN 55014-1Electromagnetic compatibility - Requirements for household appliances, electrictools and similar apparatus - Part 1 Emission [excluding clicks]EN 55014-2Electromagnetic compatibility - Requirements for household appliances, electrictools and similar apparatus - Part 2 Immunity - Product family standardEN 55015Limits and methods of measurement of radio disturbance characteristics ofelectrical lighting and similar equipmentEN 55020Sound and television broadcast receivers and associated equipment - Immunitycharacteristics - Limits and methods of measurement [excluding section 5.8]EN 55022Information technology equipment - Radio disturbance characteristics - Limitsand methods of measurement(A2LA Cert. No. 0803.02) Revised 05/18/2017Page 4 of 16
STANDARDDESCRIPTION OF STANDARDEUROPEAN UNION (cont.)EN 55024Information technology equipment - Immunity characteristics - Limits andmethods of measurementEN 55032Electromagnetic compatibility of multimedia equipment - Emission requirementsEN 55103-1Electromagnetic compatibility - Product family standard for audio, video, audiovisual and entertainment lighting control apparatus for professional use EmissionEN 55103-2Electromagnetic compatibility - Product family standard for audio, video, audiovisual and entertainment lighting control apparatus for professional use ImmunityEN 60601-1-2Medical electrical equipment - Part 1-2 General requirements for safety Collateral standard - Electromagnetic compatibility - requirements and testsEN 60601-2-2Medical electrical equipment - Part 2-2 Particular requirements for the safety ofhigh frequency surgical equipmentEN 60601-2-4Medical electrical equipment - Part 2-4 Particular requirements for the safety ofcardiac defibrillators [EMC sections only]EN 60601-2-10Medical electrical equipment - Part 2.10 Particular requirements for the safety ofnerve and muscle stimulators [EMC sections only]EN 60601-2-12Medical electrical equipment - Part 2-12 Particular requirements for the safety oflung ventilators - Critical care ventilators [EMC sections only]EN 60601-2-22Medical electrical equipment - Part 2 Particular requirements for the safety ofdiagnostic and therapeutic laser equipment [EMC sections only]EN 60601-2-24Medical electrical equipment - Part 2-24 Particular requirements for the safety ofinfusion pumps and controllers [EMC sections only]EN 60601-2-34Medical electrical equipment - Part 2-34 Particular requirements for the safety,including essential performance, of invasive blood pressure monitoringequipment [EMC sections only]EN 60601-2-37Medical electrical equipment - Part 2-37 Particular requirements for the safety ofultrasonic medical diagnostic and monitoring equipment [EMC sections only]EN 60601-2-47Medical electrical equipment - Part 2-47 Particular requirements for the basicsafety and essential performance of ambulatory electrocardiographic systemsEN 60601-2-62Medical electrical equipment - Part 2-62 Particular requirements for the basicsafety and essential performance of high intensity therapeutic ultrasound (HITU)equipmentEN 60730-1Automatic electrical controls for household and similar use - Part 1 Generalrequirements [EMC Sections Only]EN 60730-2-5 thru 9, Automatic electrical controls for household and similar use - Part 2 Particular11, 13, 14, 18requirementsEN 60945Maritime navigation and radio communication equipment and systems - Generalrequirements - Methods of testing and required test resultsEN 60974-10Arc welding equipment - Part 10 Electromagnetic compatibility (EMC)requirementsEN 61000-3-2Electromagnetic Compatibility (EMC) - Part 3 Limits - Section 2 Limits forharmonic current emissions (equipment input current 16 A per phase)EN 61000-3-3Electromagnetic Compatibility (EMC) - Part 3 Limits - Section 3 Limitation ofvoltage fluctuations and flicker in low-voltage supply systems for equipmentwith rated current 16 A(A2LA Cert. No. 0803.02) Revised 05/18/2017Page 5 of 16
STANDARDDESCRIPTION OF STANDARDEUROPEAN UNION (cont.)EN 61000-4-2Electromagnetic compatibility (EMC) - Part 4-2 Testing and measurementtechniques - Electrostatic discharge immunity testEN 61000-4-3Electromagnetic compatibility (EMC) - Part 4-3 Testing and measurementtechniques - Radiated, radio-frequency, electromagnetic field immunity testEN 61000-4-4Electromagnetic compatibility (EMC) - Part 4-4 Testing and measurementtechniques - Electrical fast transient/burst immunity testEN 61000-4-5Electromagnetic compatibility (EMC) - Part 4-5 Testing and measurementtechniques - Surge immunity testEN 61000-4-6Electromagnetic compatibility (EMC) - Part 4-6 Testing and measurementtechniques - Immunity to conducted disturbances, induced by radio-frequencyfieldsEN 61000-4-8Electromagnetic compatibility (EMC) - Part 4 Testing and measurementtechniques - Section 8 Power frequency magnetic field immunity test basic EMCpublicationEN 61000-4-11Electromagnetic compatibility (EMC) - Part 4 Testing and measuring techniques- Section 11 Voltage dips, short interruptions and voltage variations immunitytestsEN 61000-4-13Electromagnetic compatibility (EMC) - Part 4 Testing and measuring techniques- Section 13 Harmonics and interharmonics including mains signaling at a.c.power port, low frequency immunity testsEN 61000-6-1Electromagnetic Compatibility (EMC) Generic standards - Immunity forresidential, commercial and light-industrial environmentsEN 61000-6-2Electromagnetic Compatibility (EMC) Generic standards immunity for industrialenvironmentsEN 61000-6-3Electromagnetic Compatibility (EMC) Emission standard for residential,commercial and light-industrial environmentsEN 61000-6-4Electromagnetic Compatibility (EMC) Emission standard for industrialenvironmentsEN 61131-2Programmable controllers, Equipment requirements and tests[EMC sections only]EN 61204-3Low voltage power supplies, DC output - Part 3 Electromagnetic Compatibility(EMC)EN 61326-1Electrical equipment for measurement, control and laboratory use - EMCrequirements - Part 1 General requirementsEN 61326-2-1 thru 6Electrical equipment for measurement, control and laboratory use - EMCrequirements - Part 2 Particular requirements - Test configurations, operationalconditions and performance criteriaEN 61547Equipment for general lighting purposes - EMC immunity requirementsEN 62040-2Uninterruptible power systems (UPS) - Part 2 Electromagnetic compatibility(EMC) requirementsEN 62061Safety of machinery – functional safety of safety related electrical, electronic &programmable control systems [section 6.4.3, ref Annex E]EN 62233Measurement methods for electromagnetic fields of household appliances andsimilar apparatus with regard to human exposure.EN 62311Assessment of electronic and electrical equipment related to human exposurerestrictions for electromagnetic fields (0 Hz - 300 GHz)(A2LA Cert. No. 0803.02) Revised 05/18/2017Page 6 of 16
STANDARDDESCRIPTION OF STANDARDEUROPEAN UNION (cont.)EN 62479Assessment of the compliance of low power electronic and electrical equipmentwith the basic restrictions related to human exposure to electromagnetic fields(10 MHz to 300 GHz)EN 300 086Land Mobile Service; Radio equipment with an internal or external RFconnector intended primarily for analogue speechEN 300 086-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - Landmobile service - Radio equipment with an internal or external RF connectorintended primarily for analogue speechEN 300 113-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - Landmobile service - Radio equipment intended for the transmission of data (and/orspeech) using constant or non-constant envelope modulation and having anantenna connectorEN 300 219-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - Landmobile service - Radio equipment transmitting signals to initiate a specificresponse in the receiverEN 300 220-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - Shortrange devices (SRD) - Radio equipment to be used in the (25 to 1000) MHzfrequency range with power levels ranging up to 500 mWEN 300 224-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - On-sitepaging serviceEN 300 328Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - Widebandtransmission systems - Data transmission equipment operating in the 2.4 GHzISM band and using spread spectrum modulation techniquesEN 300 330-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - ShortRange Devices (SRD) - Radio equipment in the frequency range9 kHz to 25 MHz and inductive loop systems in the frequency range9 kHz to 30 MHzEN 300 386Electromagnetic Compatibility and Radio Spectrum Matters (ERM) Telecommunication network equipment - Electromagnetic Compatibility (EMC)requirementsEN 300 422-1Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Class A ReceiversEN 300 422-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - Wirelessmicrophones in the 25 MHz to 3 GHz frequency rangeEN 300 433-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - Landmobile service - Double Side Band (DSB) and/or Single Side Band (SSB)amplitude modulated citizen's band radioEN 300 440-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - Shortrange devices - Radio equipment to be used in the (1 to 40) GHz frequencyEN 300 454-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - Wide bandaudio linksEN 301 357-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - Cordlessaudio devices in the range (25 to 2,000) MHz - Consumer radio microphones andin-ear monitoring systems operating in the CEPT harmonized band(863 to 865) MHz(A2LA Cert. No. 0803.02) Revised 05/18/2017Page 7 of 16
STANDARDDESCRIPTION OF STANDARDEUROPEAN UNION (cont.)EN 301 489-1Electromagnetic Compatibility and Radio Spectrum Matters (ERM) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services- Part 1 Common technical requirementsEN 301 489-2 thruElectromagnetic Compatibility and Radio Spectrum Matters (ERM) 35, 50ElectroMagnetic Compatibility (EMC) standard for radio equipment and servicesParts 2-34, specific conditionsEN 301 502Harmonized EN for Global System for Mobile Communications (GSM) - BaseStation and Repeater equipmentEN 301 840-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - Digitalwireless microphones operating in the CEPT harmonized band(1785 to 1800) MHzEN 301 893Broadband Radio Access Networks (BRAN) - 5 GHz high performance RLAN[except DFS testing]EN 301 908-1 thru 22 Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - BaseStations (BS) and Repeaters for IMT-2000 Third-Generation cellular networks[-1, -3, -5, -7, -9, -11, -12, -14, -15, -17, -18, -20, & -22]EN 302 064-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - WirelessVideo Links (WVL) operating in the (1.3 to 50) GHz frequency bandEN 302 065Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - UltraWideBand (UWB) technologies for communication purposesEN 302 066-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Groundand Wall- Probing Radar applications (GPR/WPR) imaging systemsEN 302 195Short Range Devices (SRD); Ultra Low Power Active Medical Implants (ULPAMI) and accessories (ULP-AMI-P) operating in the frequency range 9 kHz to315 kHzEN 302 195-2Electromagnetic compatibility and Radio spectrum Matters (ERM) - Radioequipment in the frequency range 9 kHz to 315 kHz for Ultra Low Power ActiveMedical Implants (ULP-AMI) and accessoriesEN 302 208-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - RadioFrequency Identification Equipment operating in the band (865 to 868) MHzwith power levels up to 2 WEN 302 291-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - ShortRange Devices (SRD) - Close Range Inductive Data Communication equipmentoperating at 13.56 MHzEN 302 326-2Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2:Digital Multipoint Radio EquipmentEN 302 326-3Fixed Radio Systems; Multipoint Equipment and Antennas; Part 3:Multipoint Radio AntennasEN 302 500-2Electromagnetic Compatibility and Radio Spectrum Matters (ERM) - ShortRange Devices (SRD) using Ultra WideBand (UWB) technology - locationtracking equipment operating in the frequency range from (6 to 8.5) GHzEN 302 502Broadband Radio Access Networks (BRAN) – 5.8 GHz fixed broadband datatransmitting systemsEN 302 645Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Short rangedevices; global navigation satellite systems (GNSS) repeaters(A2LA Cert. No. 0803.02) Revised 05/18/2017Page 8 of 16
STANDARDIMDA SINGAPOREIMDA TS CT-CTSIMDA TS SRDIMDA TS ARIMDA TS WBAIMDA TS LMRIMDA TS CBSIMDA TS UWBIMDA TS GMPCSINTERNATIONALCISPR 11CISPR 13CISPR 14-1CISPR 14-2CISPR 15CISPR 20CISPR 22CISPR 24CISPR 32CISPR 35IEC 60533IEC 60601-1-2IEC 60601-2-2IEC 60601-2-10IEC 60601-2-24IEC 60601-2-37IEC 60601-2-47DESCRIPTION OF STANDARDTechnical specification for cordless telephone and cordless telecommunicationsystems [excluding dect and phs]Technical specification for short range devicesTechnical specification for amateur radio equipmentTechnical specification for wireless broadband access (WBA) equipmentTechnical specification for land mobile radio equipmentTechnical specification for cellular base station and repeater systemTechnical specification for ultra-wideband (UWB) devicesTechnical specification for global mobile personal communication by satellite(GMPCS) terminalsIndustrial, scientific and medical (ISM) radio-frequency equipment Electromagnetic disturbance characteristics - Limits and methods ofmeasurementSound and television broadcast receivers and associated equipment - Radiodisturbance characteristics - Limits and methods of measurementElectromagnetic compatibility - Requirements for household appliances, electrictools and similar apparatus - Part 1 Emission [excluding clicks]Electromagnetic compatibility - Requirements for household appliances, electrictools, and similar apparatus - Part 2 Immunity-Product Family StandardLimits and methods of measurement of radio disturbance characteristics ofelectrical lighting and similar equipmentSound and television broadcast receivers and associated equipment - Immunitycharacteristics - Limits and methods of measurement [excluding section 5.8]Information technology equipment - Radio disturbance characteristics - Limitsand methods of measurementInformation technology equipment - Immunity characteristics - Limits andmethods of measurementElectromagnetic compatibility of multimedia equipment – EmissionrequirementsElectromagnetic compatibility of multimedia equipment - ImmunityrequirementsElectromagnetic compatibility of electrical and electronic installations in shipsMedical electrical equipment - Part 1 General requirements for safety 2 Collateral standard - Electromagnetic compatibility - Requirements and testsMedical electrical equipment - Part 2-2 Particular requirements for the safety ofhigh frequency surgical equipmentMedical electrical equipment - Part 2.10 Particular requirements for the safety ofnerve and muscle stimulators [EMC sections only]Medical electrical equipment - Part 2-24 Particular requirements for the safety ofinfusion pumps and controllers [EMC sections only]Medical electrical equipment - Part 2-37 Particular requirements for the basicsafety and essential performance of ultrasonic medical diagnostic and monitoringequipmentMedical electrical equipment - Part 2-47 Particular requirements for the safety,including essential performance, of ambulatory electrocardiographic systems(A2LA Cert. No. 0803.02) Revised 05/18/2017Page 9 of 16
STANDARDDESCRIPTION OF STANDARDINTERNATIONAL (cont.)IEC 60601-2-62Medical electrical equipment - Part 2-62 Particular requirements for the basicsafety and essential performance of high intensity therapeutic ultrasound (HITU)equipmentIEC 60945Maritime navigation and radio communication equipment and systems - Generalrequirements - Methods of testing and required test resultsIEC 60974-10Arc welding equipment - Part 10 Electromagnetic compatibility (EMC)requirementsIEC 61000-3-2Electromagnetic Compatibility (EMC) - Part 3 Limits - Section 2 Limits forharmonic current emissions (equipment input current 16 A per phase)IEC 61000-3-3Electromagnetic Compatibility (EMC) - Part 3 Limits - Section 3 Limitation ofvoltage fluctuations and flicker in low-voltage supply systems for equipmentwith rated current 16 AIEC 61000-4-2Electromagnetic compatibility (EMC) - Part 4-2 Testing and measurementtechniques - Electrostatic discharge immunity testIEC 61000-4-3Electromagnetic compatibility (EMC) - Part 4-3 Testing and measurementtechniques - Radiated, radio-frequency, electromagnetic field immunity testIEC 61000-4-4Electromagnetic compatibility (EMC) - Part 4-4 Testing and measurementtechniques - Electrical fast transient/burst immunity testIEC 61000-4-5Electromagnetic compatibility (EMC) - Part 4-5 Testing and measurementtechniques - Surge immunity testIEC 61000-4-6Electromagnetic compatibility (EMC) - Part 4-6 Testing and measurementtechniques - Immunity to conducted disturbances, induced by radio-frequencyfieldsIEC 61000-4-8Electromagnetic compatibility (EMC) - Part 4 Testing and measurementtechniques - Section 8 Power frequency magnetic field immunity test basic EMCpublicationIEC 61000-4-11Electromagnetic compatibility (EMC) - Part 4 testing and measuring techniques Section 11 Voltage dips, short interruptions and voltage variations immunitytestsIEC 61000-4-13Electromagnetic compatibility (EMC) - Part 4-13 Testing and measurementtechniques - Harmonics and interharmonics including mains signaling at A.C.power port, low frequency immunity testsIEC 61000-6-1Electromagnetic capability (EMC) - Part 6-1 Generic Standards - Immunity forresidential, commercial, and light-industrial environmentsIEC 61000-6-2Electromagnetic capability (EMC) - Part 6-2 Generic Standards - Immunity forindustrial environmentsIEC 61000-6-3Electromagnetic capability (EMC) - Part 6-3 Generic Standards - Emissionsstandard for residential, commercial, and light-industrial environmentsIEC 61000-6-4Electromagnetic capability (EMC) - Part 6-4 Generic Standards - Immunity forresidential, commercial, and light-industrial environmentsIEC 61131-2Programmable controllers Part 2 Equipment requirements and tests[EMC sections only]IEC 61326-1Electrical equipment for measurement, control and laboratory use - EMCrequirements - Part 1 General requirementsIEC 61326-2-1 thru 6 Electrical equipment for measurement, control and laboratory use - EMCrequirements - Part 2 Particular requirements - Test configurations, operationalconditions and performance criteria(A2LA Cert. No. 0803.02) Revised 05/18/2017Page 10 of 16
STANDARDDESCRIPTION OF STANDARDINTERNATIONAL (cont.)IEC 61326-3-1, 2Electrical equipment for measurement, control and laboratory use - EMCrequirements - Part 3 Immunity requirements for safety-related systems and forequipment intended to perform safety-related functions (functional safety)IEC 61547Equipment for general lighting purposes - EMC immunity requirementsIEC 62061Safety of machinery - functional safety of safety related electrical, electronic &programmable control systems (note: only capable of performing EMC testingfor section 6.4.3, ref Annex E)IEC 62233Measurement methods for electromagnetic fields of household appliances andsimilar apparatus with regard to human exposure.IEC 62311Assessment of electronic and electrical equipment related to human exposurerestrictions for electromagnetic fields (0 Hz - 300 GHz)IEC 62479Assessment of the compliance of low power electronic and electrical equipmentwith the basic restrictions related to human exposure to electromagnetic fields(10 MHz to 300 GHz)ISOISO 11452-2ISO 11452-4ISO 11452-4: 2011ISO 11452-4: 2005ISO 11452-4: 2001ISO 11452-8ISO 11452-8: 2015ISO 11452-8: 200711452-10JAPANVCCI V-3(up to 6 GHz)VCCI-CISPR 32Road vehicles - Component test methods for electrical disturbances fromnarrowband radiated electromagnetic energy - Part 2 Absorber-lined shieldedenclosureRoad vehicles - Component test methods for electrical disturbances fromnarrowband radiated electromagnetic energy - Part 4 Harness excitation methods(BCI method only)Road vehicles - Component test methods for electrical disturbances fromnarrowband radiated electromagnetic energy - Part 4 Bulk current injection(BCI)Road vehicles - Component test methods for electrical disturbances fromnarrowband radiated electromagnetic energy - Part 8 Immunity to magneticfieldsRoad vehicles - Component test methods for electrical disturbances fromnarrowband radiated
EN 50270 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen EN 50370-1 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1 Emissions. EN 50370-2 Electromagnetic compatibility (EMC
EMC： EMC Unity、EMC CLARiiON EMC VNX EMC Celerra EMC Isilon EMC Symmetrix VMAX 、VMAXe 、DMX EMC XtremIO VMAX3（闪存系列） Dell： Dell PowerVault MD3xxxi Dell EqualLogic Dell Compellent IBM： IBM N 系列 IBM DS3xxx、4xxx、5xx
EMC2, EMC, Data Domain, RSA, EMC Centera, EMC ControlCenter, EMC LifeLine, EMC OnCourse, EMC Proven, EMC Snap, EMC . Symmetrix Open Replicator is a tool that can be used to migrate data from older Symmetrix arrays, CLARiiON or VNX arrays, and certain third-party storage arrays to a DMX or
Poor Man’s Guide to CE EMC Testing Introduction To an engineer unfamiliar with EMC testing, faced with meeting EMC requirements of the European Union, the specifications, tests, and jargon of the CE EMC documents can be intimidating. Many EMC specialists seem unable, or unwilling, to describe in simple or even understandable terms what CE
Automotive EMC Testing – The Challenges Of Testing Battery Systems For Electric And Hybrid Vehicles Presented by: James Muccioli - Jastech EMC Consulting, LLC. Authored by: James Muccioli - Jastech EMC Consulting, LLC. Dales Sanders - Jastech EMC Consulting, LLC. Steve English - TUV SUD America. 2 Part 1 - Defining the Test Methodology using System Engineering. Presented by: James Muccioli .
EMC-HD Overview. Key data for EMC-HD: Electromechanical Cylinder EMC-HD available with ball or planetary roller screw drive Sizes: EMC-085-HD, EMC-125-HD, EMC-180-HD Dyn. Load rating (Cdyn): up to 470kN Maximum thrust force: up to 290kN (push/pull)
Dell EMC Unity: Investment Protection Grow with Dell EMC Unity All-Flash Dell EMC Unity 350F Dell EMC Unity 450F Dell EMC Unity 550F Dell EMC Unity 650F ONLINE DATA-IN PLACE UPGRADE PROCESSOR 6c / 1.7GHz 96 GB Memory 10c / 2.2GHz 128 GB Memory 14c / 2.0GHz 256 GB Memory 14c / 2.4GHz 512 GB Memory CAPACITY 150 Drives 2.4 PB 250 Drives 4 PB 500 .
EMC Avamar Compatibility and Interoperability Matrix EMC Avamar Release Notes EMC Avamar Administration Guide EMC Avamar for Windows Server User Guide EMC Avamar and EMC Data Domain System Integration Guide Table 1 Revision history Revision Date Description 01 July 10, 2013 Initial release of Avamar 7.0.
Paper-and-Pencil Assessments INCLUDING Reading Comprehension Items English/Language Arts (ELA) Directions for Administering the Part 1 ELA Paper Practice Test- Section 1 . If the Mathematics practice test was previously administered, make sure you redistribute the practice test books to the correct students according to their names on the front covers. The passage and questions in this section .
