HIGh-DEnSITy PolyEThylEnE - JM Eagle
HIGH-DENSITYPolyethyleneWATER AND SEWERMEETS AWWA C901, AWWA C906,ASTM D2239, ASTM D2737, ASTM D3035, F714Building essentialsfor a better tomorrow
high-densityPOLYETHYLENEWATER AND SEWERPolyethylene Water and Sewer Pipe for Municipal& Industrial ApplicationsMeets AWWA C901/C906ASTM D2239, ASTM D2737, ASTM D3035, F714IIHIGH-DENSITY POLYETHYLENE WATER
high-densityPOLYETHYLENEWATER AND SEWERContents01product descriptionpolyethylene water and sewer . . . . . . . . . . . . . . . . 20203040506applicationspolyethylene water and sewer . . . . . . . . . . . . . . . . 5surge design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7short form specifications . . . . . . . . . . . . . . . . . . . . . 8Dimensions and Weights . . . . . . . . . . . . . . . . . . . . . . . 9WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
01Product DescriptionHigh-density POLYETHYLENE WATER AND SEWER PIPEFor MUNICIPAL AND INDUSTRIAL WATER AND SEWER PIPING SYSTEMSrich historyThanks to the support of our loyal customers, and thededication and hard work from our JM Eagle family members, JM Eagle continues to be the largest manufacturerof PVC pipe in the United States and in the world.JM Eagle was formed in 1982 following the purchase ofeight PVC pipe manufacturing facilities from the JohnsManville Corporation. Over the course of the years, wehave expanded our operations through seventeen additional plants in Wharton, TX; Fontana, CA; Batchelor, LA;Meadville, PA; Adel, GA; Buchannon, WV, Columbia, MO,Cameron Park, CA, Hastings, NE, Perris, CA, Sunnyside,WA, Tacoma, WA, Visalia, CA, and now with the additionof three Polyethylene (PE) facilities in Kingman, AZ,Magnolia, AR and Tulsa, OK.There are only a few pipe manufacturers in the world thatproduce both PVC and PE pipe, and we are proud to beone of them. With our modern PE pipe production facilitiesin North America, we are able to fulfill all of our customers’plastic pipe needs.descriptionJM Eagle manufactures High-Density Polyethylene(HDPE) water pressure pipe for municipal and industrialwater transmission systems. This pipe is available for sizes½"-63" in diameter. Our HDPE pipe is recognized in theindustry for its zero leak rate, high performance, and long2HIGH-DENSITY POLYETHYLENE WATERlife expectancy. They may be manufactured with colorstriping to identify their application, such as blue stripe forpotable water, green stripe for sewer application, andpurple stripe for reclaimed water.LONG LAYING LENGTHSThe standard laying length of HDPE pressure water pipe is40/50 feet. Smaller size pipe 6" and under can be extruded at continuous coil lengths by request. Longer lengthsprovide convenience in installation and allow for significantcost savings in labor and equipment.APPLICABLE SPECIFICATIONSJM Eagle HDPE water pressure pipe is manufacturedin accordance with AWWA C901/C906, ASTM D2239,ASTM D2737, ASTM D3035, ASTM F714 and ANSI/NSF14/61 listed.
QUALITY CONTROLFLOW CAPACITYJM Eagle takes great pride in the quality and workmanship of all of our products. JM Eagle quality control programs encompass three critical aspects of the manufacturing process: the incoming raw material, pipe production, and finished goods. Incoming material is visuallyinspected and tested to ensure the material meets allapplicable requirements before its release for production.During production, the pipe will be visually examined forany cosmetic defect and pipe samples will be collected forphysical verification and testing for compliance. The finished product is subjected to further visual inspection toensure it has met all the appropriate specifications andpackaging requirements. Without exception, JM Eagle pipe is constantly monitored throughout the entire manufacturing process to ensure that it is produced in accordance with all applicable specifications. The JM Eagle Quality Management System is ISO 9001:2000 registered.Copies of the registration certificates are available on ourwebsite at www.jmeagle.com.JM Eagle polyethylene pipe has a smooth interior providing less drag and a lower tendency for turbulence at highflow. Its superior flow characteristic eliminates scaling andpitting to preserve its form for consistent flow throughoutthe pipe’s entire service life. The C Factor is 150 and theManning’s flow coefficient is .009. REDUCED INSTALLATION COSTHDPE is lightweight, flexible, and comes in long lengths,allowing for easier and convenient installation. Because ofits flexible nature, it reduces the use of fittings. HDPE alsoallows for non-intrusive installation by offering technologysuch as directional boring, pipe bursting and slip lining.CORROSION RESISTANCEHDPE pipe has excellent corrosion resistance againstelectrolytic or galvanic corrosion or any known corrosivesoil or water condition. You don’t have to worry abouttuberculation, or the need for costly lining, wrapping, coating or cathodic protection.HIGH-DENSITY POLYETHYLENE WATER3
Product DescriptionHigh-density POLYETHYLENE WATER AND SEWER PIPE(CONTINUED)applicationsHDPE GRAY SLIP LINING PIPEJM Eagle manufactures gray slip lining polyethylene pipefor your rehabilitation and slip lining applications. This new,evolving technology will provide you with lower cost andalleviate problems with today’s older and failing pipelineinfrastructure. Slip lining is an excellent choice for replacing oversized corroded pipe with a smaller diameter pipeand greatly improved carrying capacity. This trenchlessprocess makes it possible to perform extensive municipalwater, sewer and industrial pipe repairs rapidly, while causing minimal disturbances. Slip lining saves both time andcost because the existing pipe support structures do notneed to be replaced. JM Eagle HDPE slip lining pipe ismanufactured in accordance with AWWA C906 and ASTMF714, and is available in both I.P.S. and D.I.P.S. in eithersolid gray color, or gray with a colored green stripe. Pleaserefer to Table 4 for pipe dimensions.4HIGH-DENSITY POLYETHYLENE WATER
02APPLICATIONSHIGH-DENSITY polyethylene water and sewer pipePE 4710 JM EAGLE HDPE pressure pipe PRIMARY PROPERTIESTable 1Propertyunittest proceduretypical valueMATERIAL DESIGNATION—PPI - TR4PE 4710CELL CLASSIFICATION—ASTM D3350445574CDENSITYg /cm3ASTM D15050.959MELT INDEXg /10minutesASTM D1238 0.15FLEXURAL MODULUSpsiASTM D790110,000 to 160,000TENSILE STRENGTHpsiASTM D6383500 to 4000SCG (PENT)HoursASTM F1473 500HDB @ 73.4º F (23º C)psiASTM D28371600COLOR; UV STABILIZER——Black withminimum 2%carbon blackBRITTLENESSTEMPERATUREºF ( ºC )ASTM D746 - 130HARDNESSShore DASTM D2240 60Note: Gray Pipe Cell Classification 445574EThe physical (or chemical) properties of JM Eagle products described herein represent typical average values obtained inaccordance with accepted test methods and are subject to normal manufacturing variations. They are supplied as a technical service and are subject to change without notice.* For data, sizes, or classes not reflected in these charts, please contact JM Eagle for assistance.HIGH-DENSITY POLYETHYLENE WATER5
APPLICATIONSHIGH-DENSITY polyethylene water and sewer pipe(CONTINUED)JM EAGLE HDPE MARKETS AND APPLICATIONSTable rground Potable Water Distribution,Mining, Dredging, River / Stream / LakeCrossing, Highway Drainage, HighwayCrossing, Oil Patch, AgricultureWater Distribution, LandfillI.P.S. / D.I.P.S.DRAINAGEStorm Water, Culverts, Highway /Residential / Agricultural Water CollectionI.P.S. / D.I.P.S.SANITARY SEWERGravity Sewer Systems,Sewer Force Mains,Directional BoreI.P.S. / D.I.P.S.Green StripeWATER DISTRIBUTIONPotable Water Systems,Water Service SystemsI.P.S. / D.I.P.S.Blue Stripe, C.T.S.IRRIGATIONUnderground Irrigations Systems,Agricultural SystemsI.P.S. / S.I.D.R.REHABILITATIONSlip Lining, Pipe BurstingI.P.S. / D.I.P.S. Gray Slip LinerRECLAIMED WATERWater Re-processing SystemsI.P.S. / D.I.P.S. Purple StripePERFORATED PIPELandfill Gas Collection,Waste Drainage Systems60º, 90º,120º, & 180ºPerforated I.P.S. / D.I.P.S.MININGLiquid Chemical Mining, Slurry andTailing Lines, Mineral Extract SystemI.P.S. / D.I.P.S.GEO-THERMALHEATING / COOLINGHeating/Cooling Systemfor home and businessI.P.S.FIRE PROTECTIONSYSTEMSFactory Mutual (FM) ApprovedI.P.S.HIGH-DENSITY POLYETHYLENE WATER
03Surge DesignSurge Pressures in Various Pressure PipeSurge Pressure refers to the maximum hydraulic transient pressure increase (sometimes called “water hammer”) in excessof the operating pressure that is anticipated in the system as the result of sudden changes in velocity of the water column.Polyethylene pipe has excellent water hammer properties and is designed to withstand surge pressure. Table 3 showsthe PC ratings, surge allowance, and corresponding allowable sudden velocity change in flow velocity for standard dimension ratios (DR’s). For recurrent surges, the allowance is 50% of the PC. For occasional surges, the allowance is 100%of the PC.Table 3RECURRINGSURGE EVENTSOCCASIONALSURGE EVENTSDRpsiSurgeCapacity(psi)CorrespondingSudden VelocityChange (fps)SurgeCapacity(psi)CorrespondingSudden VelocityChange 2.55125.43.250.86.4PRESSURE CLASS AND SERVICE TEMPERATUREPressure Class (PC) is the design capacity to resist working pressure up to 80 F (27 C) maximum service temperature,with specified maximum allowances for recurring positive pressure surges above working pressure. Table 4 shows thetemperature compensation multipliers for applications anticipating higher service temperatures.Table 4service temperatureCompensation multipliers for maximum continuously applied service temperature. 80 º F 90 º F 100 º F 110 º F 120 º F 130 º F 140 º F1.000.900.780.750.630.600.50Please note that the maximum service temperature is 140º F for pressure applications. For non-pressure applications, themaximum service temperature is limited to 176º F.HIGH-DENSITY POLYETHYLENE WATER7
04short form specificationHIGH-DENSITY polyethylene water and sewer pipeScopeinstallation designThis specification designates general requirements for ½”through 63" High-Density Polyethylene (HDPE) PE3408/3608/4710 for the Municipal and Industrial Waterand Sewer Distribution Systems.HDPE pipe provides effortless installation utilizing the newest technology available today. Our pipe can be joined byvarious heat fusion methods (see installation guide) such aselectrofusion, socket fusion, butt fusion and saddle fusion.Mechanical connections can also be applied to HDPE pipe.HDPE pipe can also operate in other advanced applicationssuch as Pipeline Rehabilitation, Slip Lining and Horizontaland Directional Drilling.MaterialsJM Eagle HDPE water pipe is manufactured with premium, highly engineered 4710 resin that provides maximumperformance benefits to service all of today’s municipaland industrial water needs. They are formulated with aminimum of 2% carbon black for maximum protectionagainst UV rays for added assurance. Our PE 4710 HDPEmaterial conforms to ASTM D3350 with the cell classification of 445574C, and is listed with The Plastics PipeInstitute (PPI). Please contact JM Eagle’s Polyethylenedepartment for PE 100 pipe availability.IRON PIPE SIZE (I.P.S.)/DUCTILE IRON PIPE SIZE(D.I.P.S.) OUTER DIAMETERJM Eagle HDPE pipe is available in both I.P.S. and D.I.P.S.sizes for your convenience and can be connected directlywithout the use of adaptors or complicated procedures.Standard Laying LengthsThe standard laying length of HDPE pressure water pipe is40/50 feet. Smaller size pipe 6" and under can be extruded at continuous coil lengths by request. Longer lengthsprovide convenience in installation and allow for significantcost savings in labor and equipment.8HIGH-DENSITY POLYETHYLENE WATERapplicationsJM Eagle HDPE pipe is versatile and can be used in awide range of applications covering all piping markets.Our pipe has been utilized in pressure water systems,sewer and wastewater, Geo-Thermal, mining, rehabilitation, and irrigation.
05Dimensions and Weightssubmittal and data sheetHDPE IRON PIPE SIZE (I.P.S.) PRESSURE PIPEANSI/NSF-61, 14 LISTEDTable 4PE 4710DR 7 (333 psi)DR 9 (250 psi)DR 11 (200 1147.41I.D. : Inside DiameterO.D. : Outside DiameterT. : Wall ThicknessFor data, sizes, or classes not reflected in these charts, please contact JM Eagle for assistance.For availability of pipe approved for FM 1613, please contact your JM Eagle representative.HIGH-DENSITY POLYETHYLENE WATER9
Dimensions and Weightssubmittal and data sheet(continued)HDPE IRON PIPE SIZE (I.P.S.) PRESSURE PIPE (continued)ANSI/NSF-61, 14 LISTEDTable 4PE 4710DR 13.5 (160 1AVG.I.D.DR 17 (125 psi)DR 19 (111 .672.84247.975200.63* For data, sizes, or classes not reflected in these charts, please contact JM Eagle for assistance.10HIGH-DENSITY POLYETHYLENE WATER
Dimensions and Weightssubmittal and data sheet(continued)HDPE IRON PIPE SIZE (I.P.S.) PRESSURE PIPE (continued)Table 4ANSI/NSF-61, 14 LISTEDPE 4710PIPESIZEAVG.O.D.DR 21 (100 psi)MIN.T.AVG.I.D.DR 26 (80 psi)WEIGHTLB/FTMIN.T.AVG.I.D.DR 32.5 (63 48.462.42357.863202.731.93858.891163.53* For custom DR, perforated pipe, please contact JM Eagle PE sales at (800) 621-4404 for availability.* All dimensions are in inches unless noted otherwise.I.D. : Inside DiameterO.D. : Outside DiameterT. : Wall ThicknessHIGH-DENSITY POLYETHYLENE WATER11
Dimensions and Weightssubmittal and data sheetJM EAGLE HDPE DUCTILE IRON PIPE SIZE (D.I.P.S.) PRESSURE PIPEANSI/NSF-61, 14 LISTEDTable 5PE 4710PIPESIZEDR 7 (333 psi)AVG.O.D.MIN.T.DR 9 (250 psi)AVG.I.D.WEIGHTLB/FTMIN.T.AVG.I.D.DR 11 (200 463638.300——————3.48231.33166.84PE 4710PIPESIZEAVG.O.D.DR 13.5 (160 psi)MIN.T.AVG.I.D.DR 17 (125 psi)WEIGHTLB/FTMIN.T.AVG.I.D.DR 19 (111 �—2.98844.465197.052.67445.131177.57* For data, sizes, or classes not reflected in these charts, please contact JM Eagle for assistance.12AVG.I.D.HIGH-DENSITY POLYETHYLENE WATER
Dimensions and Weightssubmittal and data sheet(continued)JM EAGLE HDPE DUCTILE IRON PIPE SIZE (D.I.P.S.) PRESSURE PIPE (continued)Table 5ANSI/NSF-61, 14 LISTEDPE 4710PIPESIZEDR 21 (100 psi)DR 26 (80 psi)DR 32.5 (63 5.672161.551.95446.658131.831.56347.486106.34* For custom DR, perforated pipe, please contact JM Eagle PE sales at (800) 621-4404 for availability.* All dimensions are in inches unless noted otherwise.HIGH-DENSITY POLYETHYLENE WATER13
dimensions and weightssubmittal and data sheetS.I.D.R. PRESSURE PIPE ASTM D2239Table 7ANSI/NSF-61, 14 LISTEDPE 4710SIDR 7 (250 psi)SIDR 9 (200 psi)SIDR 11.5 (160 23PE 4710SIDR 15 (125 psi)SIDR 19 (100 0.3333.0680.2050.93——I.D. : Inside DiameterO.D. : Outside DiameterT. : Wall Thickness* For data, sizes, or classes not reflected in these charts, please contact JM Eagle for assistance.** Pure-core or solid color.Note: As of January 1, 2013 JM Eagle’s polyethylene SIDR pressure pipe (ASTM D2239) will only be manufacturing with4710 polyethylene resin. The result is a higher pressure rating for each dimensional ratio (example: SIDR 15 is 125 psi andSIDR 19 is 100 psi). Please confirm your pressure rating and dimensional requirements before ordering. Please contactyour JM Eagle sales rep for details. (800) 621-440414HIGH-DENSITY POLYETHYLENE WATER
Dimensions and Weightssubmittal and data sheet(continued)REFERENCE STANDARDSASTM D638Standard Test Method for Tensile Properties of PlasticsASTM D746Standard Test Method for Brittleness Temperature of Plastics and Elastomers by ImpactASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics andElectrical Insulation MaterialsASTM D1238Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion PlastometerASTM D1505Standard Test Method for Density of Plastics by the Density-Gradient TechniqueASTM D2239Standard Specification for Polyethylene (PE) Plastic Pipe (S.I.D.R.-PR) Based on ControlledInside DiameterASTM D2657Standard Practice for Heat Fusion Joining of Polyolefin Pipe and FittingsASTM D2737Standard Specification for Polyethylene (PE) Plastic TubingASTM D2774Standard Practice for Underground Installation of Thermoplastic Pressure PipingASTM D2837Standard Test Method for Obtaining Hydrostatic Design Basis for ThermoplasticPipe MaterialsASTM D3035Standard Specifications for Polyethylene (PE) Plastic Pipe (DR-PR) Based on ControlledOutside DiameterASTM D3350Standard Specification for Polyethylene Plastic Pipe and Fittings MaterialASTM F412Standard Terminology Relating to Plastic Piping SystemsASTM F714Standard Specification for Polyethylene (PE) Plastic Pipe (S.D.R.-PR) Based onOutside DiameterASTM F1473Standard Test Method for Notch Tensile to Measure the Resistance to Slow Crack Growthof Polyethylene Pipes and ResinsAWWA C901Polyethylene (PE) Pressure Pipe and Tubing, ½ in. Through 3 in. For Water ServiceAWWA C906Polyethylene (PE) Pressure Pipe and Fittings, 4 in. Through 63 in., For Water Distributionand TransmissionNSF Standard 14Plastics Piping System Components and Related MaterialsNSF Standard 61Drinking Water System Components - Health EffectsFM ApprovedFactory Mutual Approval for Underground Fire Protection ServiceHIGH-DENSITY POLYETHYLENE WATER15
LIMITED WARRANTY1. PERIODS AND SCOPE OF COVERAGEJM Eagle warrants that the pipe products certified to the standards of the American Water Works Association (AWWA)for water distribution, transmission and force sewer mains including C900, C905, C909, C901 and C906 productsmanu factured by JM Eagle (each a “Product” and collectively, the “Products”)* are manufactured in accordance withthe following AWWA, ASTM, ANSI/NSF, and UL standards as follows: (1) AWWA C900 and ASTM 1784 cell class 12454;Gaskets meet ASTM F477; Joints meet ASTM D3139; ANSI/NSF-61, UL 1285 for the C900, (2) AWWA C905 and ASTM 1784cell class 12454; Gaskets meet ASTM F477; Joints meet ASTM D3139; ANSI/NSF-61, UL 1285 for C905, (3) AWWAC909and UL 1285; Gaskets meet ASTM F477; Joints meet ASTM D3139 for C909 and (4) AWWA C901/906, ASTM D2239, ASTMD2737, ASTM D3035, F714, cell class per ASTM D3350, PPI listed material (TR-4) PE3408/3608 & PE4710, ASNI/NSF-14for C901 and C906. JM Eagle warrants that each of these Products manufactured by JM Eagle leaves our plant free fromdefects in workmanship and materials. These Products as manufactured by JM Eagle are backed by our unprecedentedfifty (50) year Limited Warranty. This Limited Warranty provides that Products manufactured by JM Eagle meet the abovestated quality standards published by the AWWA, ASTM Interna tional (ASTM), American National Standards Institute/NSFInternational (ANSI/NSF), and Underwriters Laboratories (UL).If any Product is determined within fifty (50) years from the date of invoice by JM Eagle to be defective because it failed tomeet the above stated standards, JM Eagle will then provide replacement product of the same type, size and quan tityof the product and pay for the costs directly related to its replacement*** or issue credits, offsets or a combination thereoffor the wholesale purchase price of the defective product.JM Eagle also warrants that the design of our Products are independently tested and/or certified by AWWA, NSF andUL to meet their respective standards and that our plants manufacturing the Products are already certified or in processof being certified to ISO 9001 certification** as part of our program to develop manufacturing processes that consistentlyproduce high quality plastic pipe.JM Eagle quality control programs encompass three critical aspects of the manufacturing process: the incoming rawmaterial, pipe production, and the finished goods.2. EXCLUSIONS FROM COVERAGE AND EXCLUSIVE REMEDY:Products manufactured by JM Eagle are marked with JM Eagle, PW Eagle or US Poly stencil markings. This limitedwarranty excludes any Product not manufactured by JM Eagle , even if it is sold by JM Eagle , and also excludes defectsor failures caused after shipment by: improper installation (including, without limitation,misalignment), use in improper applications or conditions or in conjunctionwith improper materials (including, without limitation,improper lubricants, pastes, solvents or sealants), c ontact with aggressive chemical agents, freezingor overheating of liquids in the Product, or unusualpressure surges or pulsation, vibration, temperature shocking, U.V. degradation,16HIGH-DENSITY POLYETHYLENE WATER failure to adhere to JM Eagle ’s instructions concerningthe proper handling, installation, testing and use ofthe Product, failure to adhere to applicable standards set forth bylocal laws, codes, or regulations and the applicableindustry standards, or a ny other improper activities not listed above ordamage caused by the fault or negligence of anyoneother than JM Eagle .
THE WARRANTIES IN THIS LIMITED WARRANTY ARE THE ONLY WARRANTIES APPLICABLE TO THE PRODUCTS. THERE ARE NO OTHERWARRANTIES, REPRESENTATIONS OR CONDITIONS OF ANY KIND, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, WITH RESPECTTO THE PRODUCTS SUPPLIED HEREUNDER INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY ORFITNESS FOR A PARTICULAR PURPOSE. ALL SUCH WARRANTIES ARE HEREBY SPECIFICALLY DISCLAIMED AND JM EAGLE SHALLNOT BE LIABLE IN THIS RESPECT NOTWITHSTANDING JM EAGLE’S ACTUAL KNOWLEDGE OF THE PRODUCT’S INTENDED USE ORANY ADVICE OR REPRESENTATIONS THAT MAY HAVE BEEN RENDERED BY JM EAGLE CONCERNING THE DESIGN, MANUFACTURE,FABRICATION, SALE, USE, INSTALLATION OR PROVISION OF THE PRODUCTS. NO STATEMENT, CONDUCT OR DESCRIPTION BYJM EAGLE OR ITS REPRESENTATIVES, IN ADDITION TO OR BEYOND THIS LIMITED WARRANTY, SHALL CONSTITUTE A WARRANTY.BUYER AGREES THAT ITS SOLE AND EXCLUSIVE REMEDY FOR BREACH OF THIS LIMITED WARRANTY, AND THE SOLE AND EXCLUSIVEOBLIGATION OF JM EAGLE IN RESPECT OF ANY CLAIMS FOR BREACH OF THIS LIMITED WARRANTY, SHALL BE (1) THE REPLACEMENTOF THE SAME TYPE, SIZE AND LIKE QUANTITY OF NON-DEFECTIVE PRODUCT, AT THE ORIGINAL POINT OF DELIVERY AND COSTSRELATED TO ITS REPLACEMENT***, OR (2) CREDITS, OFFSETS, OR A COMBINATION THEREOF, FOR THE WHOLESALE PURCHASEPRICE OF THE DEFECTIVE PRODUCT. IN NO EVENT SHALL JM EAGLE BE LIABLE FOR LOST PROFITS, LOSS OF GOODWILL, LOSS OFBUSINESS OPPORTUNITIES, DAMAGE TO REPUTATION, SPECIAL DAMAGES, INDIRECT DAMAGES, DELAY DAMAGES, PUNITIVE DAMAGES,EXEMPLARY DAMAGES, CONSEQUENTIAL DAMAGES OR INCIDENTAL DAMAGES.3. REQUIREMENTS FOR MAKING CLAIMS:Every claim for breach under this warranty shall be void unless it is made in writing to JM Eagle and postmarkedwithin fivebusiness (5) days of the date the defect was discovered or in the exercise of ordinary care should have been discoveredand, in any event, the claim must also be made within fifty (50) years of the date of the JM Eagle invoice. As noted above,Products manufactured by JM Eagle are marked with a JM Eagle, PW Eagle or US Polystencil. This limited warrantyexcludes any Product not manufactured by JM Ea
in accordance with AWWA C901/C906, ASTM D2239, ASTM D2737, ASTM D3035, ASTM F714 and AnSI/nSF 14/61 listed. PRoDuCT DESCRIPTIon hIGh-DEnSITy PolyEThylEnE WATER AnD SEWER PIPE For M
Eagle II, Golden Eagle II, & Directional Golden Eagle II (Eagle 3 has Yr 3 included): 3rd Year Warranty (444-0002-03) 1 Each 30 days 227.00 39 Kustom Signals, Inc. Eagle II, Golden Eagle II, Directional Golden Eagle II & Eagle 3: 4th Year Warranty (444-0002-04) 1 Each 30 days 252.00 40 Kustom Signals, Inc. Eagle II, Golden Eagle II .
Rain Bird Part Number: For Eagle 900/950 — Part #D02203, Model: SRP For Eagle 700/750, 500/550 — Part #D02236, Model: SR-700 4. Selector valve key — used to manually operate and service electric Eagle Rotors. Rain Bird Part Number: For Eagle 900/950, 700/750, 500/550 — Part #B41720, Model: EGL-SVK
lene both have an IR absorption spectrum that is distinctive for polyethylene, and each possesses characteristic thermal proper-ties. High-density polyethylene has a density between 0.941 and 0.965 g per cm3.Low-density polyethylene has a density be-
2.1 The High Density Polyethylene (HDPE) Pipe shall be made from base polymer and shall conform to the requirements as specified in MS 1058 Part 1: 2005. 2.2 The base polymer shall be a single grade of polyethylene, PE 100 with a derived density greater than .93g/cm3 tested at 20 C.
EAGLE 1000 EAGLE 200 Series EAGLE 2000 EAGLE E7 EAGLE Eagle-1 DoorKing 605 DoorKing 610 DoorKing CONTROL BOX: 6002-6003-6400 DoorKing DKS 6050 DoorKing DKS 6100 . GAREN Central G3 GENIE PowerMax (all models) GENIE Excelerator (all models)
EAGLE-II Swing Gate Operator _ Installing the Warning Sign Eagle Access Control Systems, Inc. / (800) 708-8848 / www.eagleoperators.com (5) Precautions Be sure to read and follow all the Eagle Access Control Systems, Inc. and UL instructions before installing and operating any Eagle Access Control Systems, Inc. products.
The Eddie Eagle GunSafe Program is celebrating its 30th anniversary in 2018! In the program's three decades of outreach, more . Eddie Eagle Events EDDIE EAGLE ZONE AT NRA 147TH ANNUAL MEETING & EXHIBITS At this year's NRA Annual Meeting, the main attraction for the kids was the Eddie Eagle Zone! The Eddie
Although, eagles are found throughout the world, the bald eagle can only be found in North America. Both the golden eagle and the bald eagle can be seen in Pennsylvania. The golden eagle migrates through Pennsylvania and may stay through the winter. The bald eagle is a resident bird and now nests throughout the state. 2.
