Multi- Touch Panel PC ACP - 1103

Multi-Touch Panel PCACP-1103ACP-110310.1” WXGA Ultra SlimFanless Multi-Touch Panel PCIntel AtomTM N2600 ProcessorRS-232, RS-232/422/485USB2.0, Mini HDMIACP-1103 Manual 5th EdDecember 4, 2014

Multi-Touch Panel PCACP-1103Copyright NoticeThis document is copyrighted, 2014. All rights are reserved. Theoriginal manufacturer reserves the right to make improvements tothe products described in this manual at any time without notice.No part of this manual may be reproduced, copied, translated, ortransmitted in any form or by any means without the prior writtenpermission of the original manufacturer. Information provided in thismanual is intended to be accurate and reliable. However, theoriginal manufacturer assumes no responsibility for its use, nor forany infringements upon the rights of third parties, which may resultfrom its use.The material in this document is for product information only and issubject to change without notice. While reasonable efforts havebeen made in the preparation of this document to assure itsaccuracy, AAEON, assumes no liabilities resulting from errors oromissions in this document, or from the use of the informationcontained herein.AAEON reserves the right to make changes in the product designwithout notice to its users.i

Multi-Touch Panel PCACP-1103Acknowledgments TM Intel , Atom Microsoft Windows is a registered trademark of Microsoftare registered trademarks of Intel Corporation. Corporation. RTL is a trademark of Realtek Semi-Conductor Co., Ltd. C&T is a trademark of Chips and Technologies, Inc. UMC is a trademark of United Microelectronics Corporation. ITE is a trademark of Integrated Technology Express, Inc.All other product names or trademarks are properties of theirrespective owners.ii

Multi-Touch Panel PCACP-1103Packing ListBefore you begin installing your Panel PC, please make surethat the following items have been shipped: ACP-1103 Infotainment Multi-Touch Panel PC RJ-48 Type COM Port Cable x 3 Power Adapter x 1 Product DVDContains User’s Manual (in PDF format), Drivers andUtilitiesIf any of these items are missing or damaged, you should contact yourdistributor or sales representative immediately.iii

Multi-Touch Panel PCACP-1103Safety & Warranty1.Read these safety instructions carefully.2.Keep this user's manual for later reference.3.Disconnect this equipment from any AC outlet before cleaning. Donot use liquid or spray detergents for cleaning. Use a damp cloth.4.For pluggable equipment, the power outlet must be installed nearthe equipment and must be easily accessible.5.Keep this equipment away from humidity.6.Put this equipment on a reliable surface during installation.Dropping it or letting it fall could cause damage.7.The openings on the enclosure are for air convection. Protect theequipment from overheating. DO NOT COVER THE OPENINGS.8. Make sure the voltage of the power source is correct beforeconnecting the equipment to the power outlet.9.Position the power cord so that people cannot step on it. Do notplace anything over the power cord.10. All cautions and warnings on the equipment should be noted.11. If the equipment is not used for a long time, disconnect it from thepower source to avoid damage by transient over-voltage.12. Never pour any liquid into an opening. This could cause fire orelectrical shock.13. Never open the equipment. For safety reasons, only qualifiedservice personnel should open the equipment.iv

Multi-Touch Panel PCACP-110314. If any of the following situations arises, get the equipmentchecked by service personnel:a.The power cord or plug is damaged.b.Liquid has penetrated into the equipment.c. The equipment has been exposed to moisture.d.The equipment does not work well, or you cannot get it towork according to the user’s manual.e.The equipment has been dropped and damaged.f.The equipment has obvious signs of breakage.15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLEDENVIRONMENT WHERE THE STORAGE TEMPERATURE ISBELOW -20 C (-4 F) OR ABOVE 70 C (158 F). IT MAYDAMAGE THE EQUIPMENT.16. External equipment intended for connection to signal input/outputor other connectors, shall comply with relevant UL / IEC standard(e.g. UL 1950 for IT equipment and UL 60601-1 / IEC 60601 seriesfor systems – shall comply with the standard IEC 60601-1-1,Safety requirements for medical electrical systems. Equipmentnot complying with UL 60601-1 shall be kept outside the patientenvironment, as defined in the standard.17. When the temperature of CPU is higher than 35 C, the frequencyof CPU will be adjusted automatically. For example, if thetemperature of Intel Core i7 is 40 C, the frequency of the CPU willbe between 1.8 1.3 GHz.18. As most electronic components are sensitive to static electricalcharge, be sure to ground yourself to prevent static charge wheninstalling the internal components. Use a grounding wrist strapv

Multi-Touch Panel PCACP-1103and contain all electronic components in any static-shieldeddevices.Caution:It may cause the danger of explosion if battery is incorrectlyreplaced. Replace only with same or equivalent typerecommended by the manufacturer.vi

Multi-Touch Panel PCACP-1103Classification1. Degree of production against electric shock: not classified2. Degree of protection against the ingress of water: IPX13. Equipment not suitable for use in the presence of a flammableanesthetic mixture with air or with oxygen or nitrous oxide.4. Mode of operation: Continuous5. Type of protection against electric shock: Class I equipmentvii

Multi-Touch Panel PCACP-1103FCCThis device complies with Part 15 FCC Rules.Operation is subject to the following twoconditions: (1) this device may not causeharmful interference, and (2) this devicemust accept any interference receivedincluding interference that may causeundesired operation.viii

Multi-Touch Panel PCACP-1103Safety Symbol DescriptionThe following safety symbols are further explanations for yourreference.Attention, consult ACCOMPANYINGDOCUMENTS.Ground wireProtective Ground wire.ix

Multi-Touch Panel PCACP-1103China RoHS �称及含量AAEON Panel PC/ 铅汞镉(Pb)(Hg)(Cd)(Cr(VI))(PBB)(PBDE) 硬盘 液晶模块 光驱 触控模块 电源 �� 多溴联苯 ��部件所有均质材料中的含量均在SJ/T 11363-2006 材料中的含量超出SJ/T 11363-2006 �模块为选购品。x

Multi-Touch Panel PCACP-1103ContentsChapter 1 General Information1.1 Introduction . 1-21.2 Features . 1-31.3 Specification . 1-41.4 General Information. 1-7Chapter 2 Hardware Installation2.1 Safety Precautions . 2-22.2 Connectors and Jumpers of The Main Board . 2-32.3 List of Jumpers . 2-42.4 List of Connectors . 2-52.5 Clear CMOS Jumper (JP2) . 2-62.6 LVDS Port 1 Backlight Inverter VCC Selection (JP3) 2-62.7 LVDS Port 1 Operating VDD Selection (JP5) . 2-62.8 AT/ATX Power Supply Mode Selection (JP6) . 2-72.9 Realtek LAN (RJ-45) Port (CN12) . 2-72.10 COM1,RJ-45 Port (CN20) . 2-82.11 COM2,COM3 RS232/422/485 ,RJ-45 Port(CN21,CN22) . 2-92.12 Buzzer (CN8) . 2-112.13 RESET (CN9) . 2-112.14 LPC Debug Port (CN10) . 2-112.15 USB 2.0 Port 5 (CN11) . 2-12xi

Multi-Touch Panel PCACP-11032.16 USB 2.0 Port 4 (CN27) . 2-132.17 18-bits LVDS Output (CN15) . 2-132.18 HDMI Type C (CN17) . 2-142.19 Inverter / Backlight Connector (CN18) . 2-152.20 DDR3 SODIMM Slot (DIMM1) . 2-162.21 Mini Card Slot (mSATA function only) . 2-162.22 Mechanical Drawing of the ACP-1103 . 2-192.23 How to Embed the ACP-1103 . 2-20Chapter 3 AMI BIOS Setup3.1 System Test and Initialization . . 3-23.2 AMI BIOS Setup. . 3-3Chapter 4 Driver Installation4.1 Installation . 4-3Appendix A Programming the Watchdog TimerA.1 Watchdog Timer Registers .A-2A.2 Watchdog Sample Program .A-3Appendix B I/O InformationB.1 I/O Address Map .B-2B.2 Memory Address Map .B-4B.3 IRQ Mapping Chart .B-5B.4 DMA Channel Assignments .B-7Appendix C MiscellaneaC.1 General Cleaning Tips . C-2xii

Multi-Touch Panel PCACP-1103C.2 Cleaning Tools . C-3C.3 Scrap Computer Recycling . C-5Appendix D AHCI SettingD.1 Setting AHCI . D-2xiii

Multi-Touch Panel PCACP-1103Chapter1GeneralInformationChapter 1 General Information 1-1

Multi-Touch Panel PCACP-11031.1 IntroductionThe ACP-1103 is a Multi-Touch Industrial Panel PC with onboard Intel Atom N2600 processor-based computer. It is a PC-basedsystem with 10.1” true color TFT LCD display, integratedmultimedia functions make them the perfect platforms to buildcomprehensive lifestyle computing applications.The ACP-1103 includes all the features of a powerful computer intoa slim and attractive mechanism design.The ACP-1103 adopts350 nits TFT display with 1280x800 resolution. This model supportstwo-point Multi-Touch function (Window 7 : Two finger, Win XP :Single finger, Window embedded version : Single Finger.) and fullflat design is easy to clean.Moreover, its front bezel isIP-65/NEMA4 for auxiliary water-proof protection. In addition, theACP-1103 deploys 7H hardness Anti-Scratch Surface to avoidaccidental damage.The ACP-1103 supports one mSATA Hard Disk Drive for thestorage function, and has optional wireless function with WiFimodule by USB interface.Moreover, this model has one RS-232and two RS-232/422/485 with RJ-48 connectors, four USB2.0 ports,and one Mini HDMI. It is ideal for versatile applications.Chapter 1 General Information 1-2

Multi-Touch Panel PCACP-11031.2 Features 10.1” WXGA (1280x800) TFT LCD Display Aluminum Design 7H Two-point Multi-Touch Display Intel Atom N2600 Processor Fanless System VESA 75/Panel Mount Support Chapter 1 General Information 1-3

Multi-Touch Panel PCACP-11031.3 SpecificationSystem Processor Onboard Intel Atom N2600Processor System MemoryDDR3 SODIMM x 1, Max. 2 GB (Defaultis 2G RAM) LCD / CRT ControllerIntegrated graphics in Intel NM10 I/O PortRS-232 x 1 (RJ-48 connector)RS-232/422/485 x 2 (RJ-48 connector)LAN x 1 (RJ-45 connector)USB2.0 x 4Mini HDMI x 1Power button x 1Lockable power connector x 1 Storage Disk DrivemSATA Hard Disk Drive bay x 1 ExpansionWiFi module by USB interface x 1 OS SupportWindows XP 32-bit, Windows 7 32-bit, Linux Kernal 2.6.3 or higherMechanical ConstructionIP-65/ NEMA4 for front bezel MountingVESA 75/ panel mount Dimension10.47”(W) x 7.22”(H) x 1.81”(D) (266mmChapter 1 General Information 1-4

Multi-Touch Panel PCACP-1103x 183.5mm x 30mm) Carton Dimension13.58” x 7.87” x 9.65’’ (345mm x 200mmx 245mm) Net Weight2.42 lb (1.1 kg) Gross Weight5.5 lb (2.5 kg)Environmental Operating Temperatureoooooooo32 F 113 F (0 C 45 C) without airflow32 F 122 F (0 C 50 C) with airflowoooo Storage Temperature-4 F 158 F (-20 C 70 C) Storage Humidity95% @ 40 C, non-condensing Vibration1 g rms/ 5-500Hz/ Random Operationo(HDD) Shock15G peak acceleration (11 msec.duration) (HDD) EMCCE/FCC Class APower Supply DC InputDC 12V, with AC power adapter withlockLCD Display Type10.1” TFT-LCD, LED Max. Resolution1280x800 Max. Colors 262K2Luminance (cd/m )2250 cd/mChapter 1 General Information 1-5

Multi-Touch Panel PCACP-1103 Contrast Ratio600:1 Viewing Angle160º (H), 160º (V) Backlight MTBF (Hours)50,000Touchscreen TypeProjected Capacitive Multi-Touch (Twopoints) Resolution2048x2048 Light Transmission90%Chapter 1 General Information 1-6

Multi-Touch Panel PCACP-11031.4 General InformationOptional accessory mount kitUSB x 4Power buttonHDMIRS-232/422/485 x 2RS-232DC inputEthernet PortChapter 1 General Information 1-7

Multi-Touch Panel PCACP-1103AntennaVESA mountChapter 1 General Information 1-8

Multi-Touch Panel PCACP-1103Chapter2HardwareInstallationChapter 2 Hardware Installation 2-1