Roller 64 Fascia And Pockets Roller 64 Blackout
roller 64 fascia and pocketsStandard end capProvide a clean look for a systeminstalled without fascia or top box.Available in white. roller 64 blackoutBlackout configurationLutron offers side channels in a widthof 64 or 89 mm (2.5 in. or 3.5 in.) tofacilitate blackout conditions.KKFasciaroller 64 can be installed with a top/back coverand fascia for a clean, minimal look. Square andcurved fascia and pockets are available in white,black, bronze, and anodised aluminium.Side viewSquare fasciaRound fasciatop back covertop back coverMLFront viewMDimensions89 mm (3.5 in.)25 mm (1 in.)M 64 mm (2.5 in.)89 mm (3.5 in.)glassFascia end capsMM25 mm(1 in.)Mx2Lutron-provided pocket dimensionsroller 64 will never require more than 89 mm x 89mm (3.5 in. height x 3.5 in. depth) for installation.Install sidechannels backto-back at widecenter mullions.Optional sidechannelKFabricSill angleSillKSide viewceilingglassWaverley Contract and Supply Limited, Rowan House, Guildford Road Trading Estate, Farnham, GU9 9PZTel 01252737973Email sales@waverley.co.ukWebsite www.waverley.co.ukThe sill anglecompletesthe blackout bystopping lightleaks belowthe blind.
roller 100 roller 150 roller 200CWSystem dimensionsBracket design benefitsBrackets employ a two-piece design tomaximise ease and flexibility of installation.These three systems utilise a 64 mm (2.5 in.)roller tube as well as identical brackets.The roller 100 operates up to 9.29 sq. m(100 sq ft.) of fabric.* The roller 150 operates up to 14 sq. m(150 sq ft.) of fabric.* The roller 200CW operates up to 18.6 sq. m (200sq ft.) of fabric. Blinds move slowly and are bestsuited for open office spaces or common areas.Proprietary bracket designs for variousapplications include:Wall mountCeiling mountJamb mountWall mountABDCeiling mountECJamb mountDimensions19 mm (0.75 in.) symmetrical, minimum610 mm (24 in.) (minimum bracket-to bracket)102 mm (4 in.) maximum112 mm (4.43 in.)16 mm (0.62 in.) maximum projection* Maximum allowable blind size may vary based on fabric selection. Contactcustomer service or use SCT for actual blind dimensions based on fabric type.
DimensionsWall mountF112 mm (4.43 in.)G130 mm (5.1 in.) maximumNote: shownas regular rollCeiling mountHDimensions102 mm (4 in.) maximumIJ84 mm (3.29 in.)4 mm (0.15 in.)132 mm (5.2 in.) maximum112 mm (4.4 in.)LKJamb mountMDimensionsM 130 mm (5.12 in.) maximum113 mm (4.44 in.)O118 mm (4.65 in.) maximumNote:Fabric projection adjustable 13 mm (0.5 in.)Waverley Contract and Supply Limited, Rowan House, Guildford Road Trading Estate, Farnham, GU9 9PZTel 01252737973Email sales@waverley.co.ukWebsite www.waverley.co.uk
roller 100 roller 150 roller 200CWBracket featuresBlind centering and levelingA benefit of the two-piece bracket design is theability to laterally adjust the roller blind afterinstallation to ensure a centered mounting.Roller blind can also be leveled easily withoutre-mounting the bracket.Dual-mount bracketA common roller blind application is theuse of two fabrics on one window, typicallya sheer and a blackout. Fabric unrollsclosest to glass. The dual mount usesa two-piece bracket.TPLeveladjustmentSQLateral adjustmentRProjection adjustmentThe bracket allows for projection adjustmentof the roller tube during and after installation.DimensionsP 165 mm (6.5 in.)279 mm (11 in.)25 mm (1 in.)209 mm (8.22 in.)T 178 mm (7 in.)ProjectionadjustmentscrewsUp to 13 mm (0.5 in.)projection adjustmentWaverley Contract and Supply Limited, Rowan House, Guildford Road Trading Estate, Farnham, GU9 9PZTel 01252737973Email sales@waverley.co.ukWebsite www.waverley.co.ukglass
fascia and pocketspocket dimensionsFascia and top back coversLutron roller blinds can be installed within fasciaand top back covers. This two-piece enclosureboth conceals the product and affords accessibilityfor adjustment and maintenance. Squareand curved fascia and pockets are available inwhite, black, bronze, and anodised aluminium.Pocket dimensionsPockets are available for roller 100TM,roller 150TM, and roller 200CW systems.The pocket mount uses a two-piece bracket.Add side channels and sill angles to achieveblackout conditions with opaque fabrics.FasciaTop back coverOptionalend capVFascia and top/back cover withside channel and sill angle (page 20)WThe fascia mount uses a two-piece bracket.UceilingglassLutron pocket dimensionsUV 121 mm (4.75 in.)W 127 mm (5 in.)DimensionsU 107 mm (4.2 in.)Note: Fascia and top back cover can be usedindependently of each other.Waverley Contract and Supply Limited, Rowan House, Guildford Road Trading Estate, Farnham, GU9 9PZTel 01252737973Email sales@waverley.co.ukWebsite www.waverley.co.uk
roller 100 roller 150 roller 200CWNEW: In-line coupled roller systemUp to six blind panels can be coupled,allowing for the entire assembly to be poweredby a single electronic drive unit (EDU).Blackout configurationLutron offers side channels in a widthof 64 or 89 mm (2.5 in. or 3.5 in.) tofacilitate blackout conditions.SHTSide viewVUFront viewV Dimensions 121 mm (4.75 in.)Pocket dimensionsshown includingside channelsT 127 mm (5 in.)U 25 mm (1 in.)V 64 mm (2.5 in.)89 mm (3.5 in.) VInstall sidechannels backto-back at widecenter mullionsVV x225 mm(1 in.)Optional sidechannelFabricSill angleSimple installation - no pins neededIncreased efficiency by operating multipleblinds with one EDUOffers 38 mm (1.5 in.) minimum light gapbetween panelsCan be assembled with any bracketconfiguration (see page 21)Offers phase adjustment, which allows thebottom bars to be aligned after installationAllows precise bottom bar alignmentNote: Drive side minimum width per coupledblind 648 mm (25.5 in.)Coupling adjustmentUse an allen key to align bottom barswhile blinds are in place. Use set screwsto adjust alignment.The sill anglecompletesthe blackout bystopping lightleaks belowthe blind.SillSide viewWaverley Contract and Supply Limited, Rowan House, Guildford Road Trading Estate, Farnham, GU9 9PZTel 01252737973Email sales@waverley.co.ukWebsite www.waverley.co.uk
Coupling sub-bracketsWall mount coupling sub-bracketFascia mount coupling sub-bracketDimensions51 mm (2.0 in.)76 mm (3.0 in.)Dimensions156 mm (6.16 in.)103 mm (4.04 in.)Ceiling mount coupling sub-bracketPocket mount coupling sub-bracket(Top view)Dimensions51 mm (2.0 in.)78 mm (3.08 in.)Dimensions216 mm (8.48 in.)106 mm (4.17 in.)Jamb mount coupling sub-bracketDual narrow coupling sub-bracketDimensionsDimensions84 mm (3.31 in.)107 mm (4.22 in.)Waverley Contract and Supply Limited, Rowan House, Guildford Road Trading Estate, Farnham, GU9 9PZTel 01252737973Email sales@waverley.co.ukWebsite www.waverley.co.uk90 mm (3.56 in.)209 mm (8.22 in.)
NEW angled coupler0 -45 Angled coupler45 Allows up to 45 angle Reverse rolllight gap0 33 mm (1 5/16 in.)33 mm (1 5/16 in.)2 33 mm (1 5/16 in.)32 mm (1 1/4 in.)4 33 mm (1 5/16 in.)32 mm (1 1/4 in.)6 35 mm (1 3/8 in.)32 mm (1 1/4 in.)8 35 mm (1 3/8 in.)30 mm (1 3/16 in.)10 35 mm (1 7/16 in.)30 mm (1 3/16 in.)12 35 mm (1 7/16 in.)30 mm (1 3/16 in.)14 35 mm (1 7/16 in.)29 mm (1 1/8 in.)16 38 mm (1 1/2 in.)29 mm (1 1/8 in.)Allows up to 45 angle between coupled blinds(22.5 maximum each side).18 38 mm (1 1/2 in.)29 mm (1 1/8 in.)20 38 mm (1 1/2 in.)29 mm (1 1/16 in.)No committment to blind angle when ordering;one size fits all angles, 0 -15 or 0 -45 .22 40 mm (1 9/16 in.)29 mm (1 1/16 in.)24 40 mm (1 9/16 in.)29 mm (1 1/16 in.)26 41 mm (1 5/8 in.)25 mm (1 in.)28 41 mm (1 5/8 in.)25 mm (1 in.)30 43 mm (1 11/16 in.) 25 mm (1 in.)32 43 mm (1 11/16 in.) 25 mm (1 in.)34 43 mm (1 11/16 in.) 24 mm (15/16 in.)36 44 mm (1 3/4 in.)24 mm (15/16 in.)38 44 mm (1 3/4 in.)24 mm (15/16 in.)40 44 mm (1 3/4 in.)22 mm (7/8 in.)42 46 mm (1 13/16 in.) 22 mm (7/8 in.)44 46 mm (1 13/16 in.) 22 mm (7/8 in.)45 46 mm (1 13/16 in.) 21 mm (13/16 in.)Angled coupler parameters:Ceiling- and pocket-mount capableMaximum angle: 45 (22.5 each side)Maximum number of blinds: 3(per roller 100 or roller 200CW)Minimum drive side panel width: 648 mm (25.5 in.)Minimum non-drive side panel width: 356 mm (14 in.)Angled coupler templateNew measuring template for angled blindsensures precise and easy installation Regular rolllight gapAngled couplerRemoves need for multiple blind drives in angledapplications – resulting in significant cost reduction.Ultra-quiet low-drag coupler components allow up tothree blinds per roller 100TM or roller 200CW system. Blindangle(total)Plastic angled coupler templates can be orderedthrough Customer Service:0 -15 Narrow Angle Coupler Template (p/n 045-315)0 -45 Wide Angle Coupler Template (p/n 045-318)regular rollreverse roll0 -15 Angled coupler(use where possible to minimise light gaps)Blindangle(total)Regular rolllight gapReverse rolllight gap0 22 mm (7/8 in.)22 mm (7/8 in.)2 22 mm (7/8 in.)21 mm (13/16 in.)4 22 mm (7/8 in.)21 mm (13/16 in.)6 24 mm (15/16 in.)21 mm (13/16 in.)8 24 mm (15/16 in.)19 mm (3/4 in.)10 25 mm (1 in.)19 mm (3/4 in.)12 25 mm (1 in.)19 mm (3/4 in.)14 25 mm (1 in.)17 mm (11/16 in.)15 25 mm (1 in.)17 mm (11/16 in.)Waverley Contract and Supply Limited, Rowan House, Guildford Road Trading Estate, Farnham, GU9 9PZTel 01252737973Email sales@waverley.co.ukWebsite www.waverley.co.uk
NEW WIDR tube optionWith Integrated Deflection Reduction (WIDR) Longer window span for roller 100TM, roller 150TMand roller 200CW blinds:Allows for blinds up to 4572 mm (180 in.) widewith minimal deflectionReduced waves and V’s in fabricsUtilises all existing roller 100 bracket andtop-treatment optionsUtilises coupling systems for extra wide coupled blindsTube diameter 78 mm (3.0 in.) vs. standard roller100 63.5 mm (2.5 in.)WIDR tube has a larger and stronger cross-sectionto prevent deflection over standard tube options. Itallows for wider blinds to be mounted in residentialand commercial-sized pockets, while maintainingthe quiet precision of Lutron electronic drive technology. Tube cross-section(not actual size)standard tubeDimensions:Tube diameter: 78 mm (3.0 in.)Pocket size: 121 mm x 127 mm(4.75 in. x 5.00 in.) standard pocketTypical max. size: 9.29 sq. m (100 sq.ft.)Min. bracket to bracket width: 610 mm (24 in.)Max. bracket to bracket width: 4572 mm (15 ft.)WIDR tube parameters:Widest blind: 4572 mm (15 ft. w)Longest blind: 4572 mm (15 ft. h)Typical blind: 3658 mm x 2539 mm(12 ft. w x 8.33 ft. h)Minimum system width: 610 mm x 610 mm(2 ft. w x 2 ft. h)* Note: Some top treatments may be unavailable.Waverley Contract and Supply Limited, Rowan House, Guildford Road Trading Estate, Farnham, GU9 9PZTel 01252737973Email sales@waverley.co.ukWebsite www.waverley.co.ukWIDR tube
pocket dimensions Pocket dimensions Pockets are available for roller 100 TM, roller 150 TM, and roller 200CW systems. The pocket mount uses a two-piece bracket. Lutron pocket dimensions 121 mm (4.75 in.) 127 mm (5 in.) V Fascia and top/back cover with side channel and sill angle Fascia Top
Lutron 05 Curved fascia Sivoia QED roller 64 can be installed with a top back cover and curved fascia for a clean, minimal look. Squared off fascia is also available. Roller tube end cap Provide a clean look for a system installed without fascia or pocket. Available in white only. Pocke
4 TIMKEN METRIC TAPERED ROLLER BEARINGS BEARING DATA TIMKEN METRIC TAPERED ROLLER BEARINGS Bore Part Number Dimension Series (ISO 355) Bearing Dimensions Bore d O.D. D Width T B Width C mm mm mm mm mm mm 15 30302 2FB 15.000 42.000 14.250 13.000 11.000 17 30203 2DB 17.000 40.000 13.250 12.000 11.000 30303 2FB 17.000 47.000 15.250 14.000 12.000 20 File Size: 279KBPage Count: 20Explore furtherTapered Roller Bearing Catalog Timkenwww.timken.comTimken Tapered Roller Bearing Catalog - TIMKEN - PDF .pdf.directindustry.comTimken Metric Tapered Roller Bearing Catalogwww.timken.comTIMKEN METRIC TAPERED ROLLER BEARINGSwww.timken.comTimken-Tapered Roller Bearing Catalogue - THE TIMKEN .pdf.aeroexpo.onlineRecommended to you b
Lutron Sivoia QS Roller 225 TM shades Sivoia QS roller 225 shades Product Specification page 1 of 12 P/N 086-105 REV A Sivoia QS roller 225 . roller 100, roller 200CW, or roller 225 TM Up to 1 seeTouch QS keypad 500 ft (150 m) 200 ft (60 m) 125 ft (35 m) 2 Sivoia QS roller 64, 30 sq ft (2.75 sq m) each
Install beam/clip assembly on wall bolts, sandwiching fascia between wall and beam. j. On . FRONT. fascia, follow same procedure as in (f.) above, assuring fascia pieces butt together. k. Fasten . FRONT. fascia to hanger beam per (g.) above, EXCEPT offset fascia face 3/8" forward of front of beam. l. Seal in joint band and joint angles at all .
Fascia Research Congress: “Fascia is the soft tissue com-ponent of the connective tissue system that permeates the human body. . . . The scope of our definition of and inter - est in fascia extends to all fibrous connective tissues, including aponeuroses, ligaments, tendons, retinaculae, joint capsules, organ and vessel tunics, the epineuria, the
triangle. The deep investing fascia is pierced by the cutanous branches of the cervical plexus, the external jugular vein and small cutanous arteries. The superficial cervical fascia is not a separate layer but a zone of lo ss connective tissue between the dermis and deep fascia and is continuous with both. This fascia covers the platysma .
Fascia Research Congress in Boston (2007), fascia has aroused increasing interest from scientists, clinicians and manual body therapists. The number of research papers on fascia appearing in peer-reviewed journals has rapidly increased, particularly since the late 1980s and mid 2000 (see Fig. 1). Since the publication of the proceedings of the
Adventure tourism consumption refers to tourists experiences of actually consuming adventure activities while on holiday, and the benefits gained from these experiences. Adventure is often all-consuming and challenging and this means it can prompt diverse and conflicting emotions, ranging from feelings of fear and risk to deep satisfaction and elation (Swarbrooke, Beard, Leckie & Pomfret, 2003 .
