Goulds Model 3196
Goulds Model 3196Model3196 STXChemical Process PumpsDesigned for Total Range ofIndustry ServicesTOTAL HEAD–FEET (METERS)5 ANSI Pumps Capacities to 7000 GPM (1364 m3/h) Heads to 730 feet (223 m) Temperatures to 700 F (371 C) Pressures to 375 PSIG (2586 kPa)325(99)00Outstanding Featuresfor OutstandingPerformance425 (97)CAPACITY–GPM (m 3/h)Model3196 MTXTOTAL HEAD–FEET (METERS)15 ANSI PumpsExtended Pump Life X-Series Power Ends Patented TaperBoreTM PLUS Seal Chamber BigBoreTM Seal Chambers ANSI PLUS Features725(221)001700 (386)CAPACITY–GPM (m 3/h)Model3196 XLT-XTOTAL HEAD–FEET (METERS)Optimum Hydraulic Performance Fully Open Impeller Full 50/60 Hz Coverage 29 Sizes Computerized Pump SelectionSafety ANSI B15.1 Coupling Guard Ductile Iron Frame Adapter Optional Shaft Guard9 ANSI Pumps310(96)0Ease of Maintenance Back Pull-out Design External Impeller Adjustment Maximum Interchangeability Optional C-Face Motor AdapterProven Performance0600 (136)Every day in over 500,000 installations, the Goulds3196 ASME/ANSI (B73.1M) process pump proveswhy it’s the industry standard for performance. Usersin chemical, petrochemical, pulp & paper, primarymetals, food & beverage and general industries knowthey can make no better choice than the best.6000 (1363)CAPACITY–GPM (m3/h)17CHEM-1A
Model 3196 Chemical Process PumpsHeavy Duty Design Features for Total Range of Process ServicesSTANDARDLABYRINTHOIL SEALSCarbon-filled TEFLON* forchemical resistance.Prevent premature bearingfailure caused by lubricantcontamination and lossof oil.LUBRICATIONFLEXIBILITYHEAVY DUTY SHAFTAND BEARINGSX-Series power endspre-drilled for choice oflubrication. Easy fieldconversion from standardflood oil to oil mist orgrease.Shaft designed for minimum deflection— less than.002 in. (.05 mm)—at sealfaces. Bearings sized for2-year minimum and10-year average life undertough operating conditions.SERRATED FLANGESFor positive sealing againstleakage. Meets ANSI B16.5requirements. Class 150flanges standard, optionalClass 150 RF, 300 FF/RF.CASING Top centerlinedischarge for airhandling,self-venting. Class 150 pumpshave Class 300wall thicknessas standard. Back pull-outdesign. Integral feet.ONE-INCHOIL SIGHTGLASSFor easymonitoring ofactual oil leveland condition.FULLY OPENIMPELLERRIGID FRAME(AND CASING) FEETReduce effect of pipe loadson alignment.SEALING FLEXIBILITYENGINEERED SEAL CHAMBERSWide range of sealing arrangementsavailable to meet service conditions.Designed to provide best seal environment forselected sealing arrangements/services.Standard choices are patented TaperBoreTMPLUS, BigBoreTM, standard bore or jacketedseal chambers.TEFLON is a registered trademark of E.I. DuPont. CHEM-1A18Acknowledged bestdesign for CPI services-solids handling,stringy material,corrosives, abrasives.Back pump-out vanesminimize sealingchamber pressure.
Construction Details All dimensions in inches and (mm).STXDiameter at s Sleeve)1.375(35)1.75(45)2.125(54)2.5(64)(With 6.125(156)8.375(213)8.375(213)9.969(253)Diameter in Stuffing Box/Seal ChamberShaftDiameter Between BearingsDiameter at CouplingOverhangMaximum Shaft DeflectionShaft Deflection Index (L3/D4)SleeveBearings0.002 (0.05)(With Sleeve)1431164862(Less Sleeve)64632925O.D. thru Stuffing Box/Seal Chamber1.375(35)1.752.125(54)2.5(64)*SKF 6207SKF 6309SKF 6311SKF 6313ThrustSKF 5306 A/C3SKF 5309 A/C3SKF 7310 BECBMSKF 5313 A/C34.125(105)6.75Average L'10 Bearing LifeBigBore Seal ChamberBoreStuffing BoxBorePower LimitsHP (kW) per 100 RPMCasing(45)RadialBearing 25(235)50,000 imum Liquid Temperature —Oil/Grease Lubrication without Cooling350 F (177 C)Maximum Liquid Temperature —Oil Lubrication with High Temp. Option700 F (370 C)Corrosion Allowance(10.5)**.125 (3)*17 inch sizes have 21 4 inch (57) shaft diameters in stuffing box/seal chamber with sleeve. Shaft sleeve O.D. is 23 4 inches (70) for packing and 21 2 inches (64) for mechanical seals.Seal chamber bore is 43 4 inches (121). Stuffing box bore is 35 8 inches (92).**17 inch sizes power limit per 100 RPM is 20HP (15kW).Design Features for Extended MTBFComponentFeatureBenefitA ShaftOptimum overhang vs diameter.Low deflection (less than .002 in.) at seal faces for longer sealand bearing life.B BearingsOptimized size and configuration.Provide 10-year average bearing life within designoperational range.C Oil SealsCarbon–filled Teflon* labyrinth seals.Prevent primary cause of premature bearing failure—lubricantcontamination. Also prevent loss of oil.Larger oil sump.Bearings run cooler, last longer.Frame foot.Rigid design reduces effects of pipe loads on pump/motorshaft alignment. Bearings and seals last longer.One-inch oil sight glass.Allows maintenance of proper oil level.Mounting flange.Allows use of C-Face adapter for factory alignment; eliminatespossibility of field misalignment.Condition monitoring sites.Allow use of temperature/vibration sensors for predictivemaintenance.Pre-drilled lubrication ports.Provide lubrication flexibility. Easy conversion to flood oillubrication, grease, oil mist as conditions require.Extra corrosion allowance.Bonus thickness—Class 150 pumps feature Class 300 wallthickness—longer life under corrosive/erosive conditions.Heavy duty design.Superior resistance to pipe loads. Available with Class150 or 300 flanges.D BearingFramePower EndE CasingFully open design.F ImpellerLiquid EndBest design for handling corrosives, erosives and stringy material.Two times wear area of enclosed impeller.Back pump-out vanes.Reduces positive stuffing box/seal chamber pressure.Balancing to ISO 1940 Standards.Reduced vibration extends seal and bearing life.Impeller O-ring.Protects threaded area against corrosion.Improved lubrication and cooling of seal faces extendmechanical seal life.G SealChamberEnlarged (BigBore and TaperBore PLUS) bores designed specifically formechanical seals.H HighPerformanceGlandTangential flush connections.Prevent solids impingement on seal faces.Metal-to-metal fit with seal chamber.Assures concentricity and perpendicularity for extended seal life.*E.I. DuPont reg. trademark19Accommodate larger diameter mechanical seals allowing useof “new generation” seal designs.CHEM-1A
X-Series Power EndsLubrication FlexibilityGoulds X-Series Power Ends are designed for anylubrication system of user preference. Choice of floodoil, oil mist, grease lubrication. ANSI PLUS TM sealedpower end with magnetic oil seals available asan option. Pre-drilling at factory allows easy fieldconversion (flood oil to oil mist back to flood oillubrication) without modifying parts. Flexible designaccommodates oil mist configurations tomeet users practices.ANSI PLUS TMSEALEDPOWER ENDMTX POWER ENDWITH OIL MISTMAGNETICOIL SEALSGREASELUBRICATIONLTX Power EndFor High Load ApplicationsAlthough Goulds X-Series Power Ends are designed fortough conditions, some applications push a power endbeyond ANSI design limits. Three examples are:1) a pump is operated at reduced flows, 2) pumping highspecific-gravity liquids, 3) overhung belt driveapplications. These cause excessive loads which resultin increased shaft deflection. This leads to prematurebearing and seal failure.Goulds ANSI PLUSTM LTX Power End is a practicalsolution. An oversized shaft and bearing assemblysignificantly expands the limits for long, trouble-freebearing and seal life.OVERSIZEDSHAFTMinimizes shaft deflection,extends seal life. BHP limitextended to 200 HP (149 kW).DUPLEXTHRUSTBEARINGSIdeally sized forhigh-load applications.Standard on LTX.FLINGER/CHANNEL OIL LUBRICATION SYSTEMDirects oil to thrust bearings for efficient cooling, improved lubrication.CHEM-1A20
Goulds X-Series Power EndsDesigned for Reliability,Extended Pump LifeStandard performance features extend pump life.Goulds backs reliability with a three-yearunconditional warranty.X-Series power ends are interchangeable with7 different Goulds models: 3196 (CHEM-1A),LF 3196 (CHEM-1B), CV 3196 (CHEM-1C),3796 (CHEM-1D), 3996 (CHEM-1E),NM 3196 (CHEM-2A) and 3198 (CHEM-2B).CARBON-FILLED TEFLON*LABYRINTH OIL SEALSPrevent contamination of lubricant, theprimary cause of prematurebearing failure.EXTRA LARGEOIL SUMPLarge oil capacity providesoptimum heat transfer forcooler running bearings.SHAFT/BEARINGS ASSEMBLYShaft designed for minimum deflection for long sealand bearing life. Bearings sized for optimum life.Duplex thrust bearingsoptional.LARGE OIL SIGHT GLASSAllows for viewing condition and levelof oil—critical for bearing life. Framepre-drilled for optional bottle oiler.RIGID FRAMEFOOTCONDITIONMONITORING SITESReduces effect of pipeloads on shaft alignment.Pump/driveralignment is bettermaintained forextended bearing andseal life.Allow easy and consistentmonitoring of temperature andvibration for preventivemaintenance. Optionalinstallation of sensors.C-FACE ADAPTERX-Series Power Endsaccommodate optionalC-Face motor adapter—simplifies pump/motoralignment.FRAMEADAPTERDuctile ironstandard forsafety andstrength.*E.I. DuPont reg. trademark21CHEM-1A
Parts List and Materials of ConstructionMaterialItemNumberPart NameDuctileIron316SSCD4MCuAlloy le Iron316SSCD4MCuAlloy 20MonelNickelHastelloyTitaniumImpellerDuctile Iron316SSCD4MCuAlloy 20MonelNickelHastelloy105Lantern RingTitanium106Stuffing Box Packing108Frame AdapterDuctile Iron112Thrust BearingDouble Row Angular Contact**122Shaft—Less Sleeve (Optional)122Shaft—With SleeveHastelloyTitanium126Shaft Sleeve136Bearing Locknut and Lockwasher168Radial Bearing184Stuffing Box Cover (Packed Box)Ductile Iron316SSCD4MCuAlloy 20184MSeal Chamber (Mechanical Seal)Ductile Iron316SSCD4MCuAlloy 20228Bearing Frame250Gland262Repeller/Sleeve (Dynamic Seal Option)Glass-Filled Teflon*Teflon* Impregnated FibersSAE4140316SSAlloy 20MonelNickelSAE4140316SS316SSAlloy TitaniumMonelNickelHastelloyTitaniumSteelSingle Row Deep GrooveCast Iron (Ductile Iron for STX Group)316SSCD4MCuAlloy oyTitanium264Gasket, Cover to Backplate (Dynamic Seal)265AStud/Nut, Cover to Adapter319Oil Sight Glass332ALabyrinth Oil Seal (Outboard)Carbon-Filled Teflon* with Viton O-ring333ALabyrinth Oil Seal (Inboard)Carbon-Filled Teflon* with Viton O-ring351Casing Gasket358ACasing Drain Plug (Optional)360Gasket, Frame-to-Adapter360AGasket, Bearing End Cover370Cap Screw, Adapter-to-Casing418Jacking Bolt444Backplate (Dynamic Seal Option)469BDowel Pin496O-ring, Bearing Housing496AO-ring, ImpellerTeflon*304SSGlass/SteelAramid Fiber with EPDM RubberSteel316SSCD4MCuAlloy 20MonelManila PaperVellumoidSteel304SS304SSDuctile Iron316SSCD4MCuAlloy 20MonelSteelBuna RubberGlass-Filled Teflon**E.I. DuPont reg. trademark**LTX Power End features Duplex Angular ContactSectional ViewModel 3196 STX228168 333A100250 370Illustrated: BigBore Seal Chamber Flood Oil 1A12622418351
Model 3196 MTXIllustrated: BigBore Seal Chamber Oil Mist 496184M351358A319360469B250418126Model 3196 XLT-XIllustrated: BigBore Seal Chamber Grease Lubrication228 168 333A 126 360 108 184M EM-1A
Stocked OptionsGoulds offers a variety of options to meet users’ specific plant andprocess requirements. All are stocked for minimum delivery time.High and Low Temperature CapabilityFor high and low temperature applications or wherepumpage temperature must be controlled, theseoptions are readily available.FINNED COOLERDirectly cools oil for lower bearingtemperature. Requires minimum coolingwater. Corrosion resistant construction.Recommended for temperaturesover 350 F (177 C).HIGH TEMPERATUREOPTIONCONTROL HEAT JACKET[For operation to 700 F (371 C)]*Jacketed Stuffing Box*Finned Cooler*316 Shaft*Graphite Impeller O-ring*Graphite Casing GasketEconomical clamp-on jacket provides practical method of heating orcooling the casing. Excellent heat transfer characteristics. Easy toinstall or remove for pump servicing.JACKETEDSTUFFING BOX ORSEAL CHAMBERJACKETED CASINGMaintains propertemperature control ofsealing environment. Idealfor maintaining temperaturefor services such as moltensulphur and polymerizingliquids.Safety FeaturesCast-in jacket for heating or coolingpumpage.Goulds recognizes users’ concern for safe pump operation and offers optionsto meet plant safety requirements.ANSI COUPLING GUARDMeets all requirements of ANSI B15.1specifications.CHEM-1ACLASS 150 & 300RAISED FACE FLANGESSerrated raised face flanges for positivesealing against leakage.24SHAFT GUARDWhen a guard around all rotatingshaft parts is preferred.
Special SurfacePreparationsAlthough Goulds cast parts provide exceptionally smooth finishfor superior hydraulic performance, many users require special surfacefinishes including: Passivation Surface Finish Less Than SIS Grade 2 Electropolishing Fusion Bonded, Epoxy Coated Power End Hard Metal Coatings Special Paint SystemsSeal Flush PlansTo control emission levels and meet seal installationrequirements, all ANSI B73.1 seal flush and coolingplans are available. Goulds can also provide otherspecial arrangements of user preference.CPI PLAN 7311CPI PLAN 7353By-pass flush lubricates single seal faces.Pressurized circulation lubricates double seal faces.BASEPLATE SELECTION GUIDEBaseplate OptionsSTANDARDInadequate pump mounting can lead to a host ofmaintenance problems. If not rigid, a baseplate candistort, causing pump/motor misalignment leading tocoupling, shaft, bearing and mechanical seal failures.For severe environments, a baseplate must be corrosionresistant or it will have to be replaced periodically. Abaseplate must also be able to withstand forces andmoments of plant piping systems.Goulds offers a complete range of mountingsystems to meet plant requirements, and to makemaintenance easier.OPTIONALTYPE 1CamberTopCast IronPLANT REQUIREMENTSTYPE 2PERMABASETMTYPE 3TYPE 4Fabricated EnhancedSteelFeatureFabricatedSteelCorrosion Resistance (mild/moderate)Corrosion Resistance (severe)Machined Pump & Motor PadsCircular Grout Holes (4 in. min.)Vent Holes (1 in. min.)Vent Holes (1/2 in. min.)Non-OverhangFull Drain RimBuilt-in Drain Pan (under pump)TYPE 1Camber TopCast IronDrain Pan Under PumpTYPE 2PERMABASETMFRP BaseplateBaseplate Leveling ScrewsMotor Alignment AdjustersLifting EyesContinuous Welding UsedFlexibly MountedSpring-Loaded*Available in 304 and 316 SSTYPE 3FabricatedSteelANSI B73.1-1991 ConformanceAPI-610 FeaturesTYPE 4EnhancedFeature Fabricated Baseplate*Engineered option–requires special baseplate25CHEM-1A
Maximum Sealing FlexibilityEngineered Seal Chamber Selection GuideGoulds engineered seal chambers are designed to provide the best seal environment forselected sealing arrangements/services.Ideally SuitedTYPE 1TYPE 2TYPE 3TYPE 4TYPE 5Standard BoreBigBoreTMTaperBoreTM PLUSJacketed BigBoreTMBAcceptableDesigned for packing.Also accommodatesmechanical seals.Enlarged chamber forincreased seal life throughimproved lubrication andcooling.CNot RecommendedLower seal face temperatures, self- venting anddraining. Solids andvapors circulated awayfrom seal faces.JacketedTaperBoreTM PLUSAMaintains propertemperature control(heating or cooling)of seal environment.Maintains proper temperature control (heating orcooling) ofseal environment.ServiceWater-Based Liquids with FlushAAAAEntrained Air or VaporCBAABSolids 0-10%, no FlushCCAACASolids Greater than 10% with FlushBACCAPaper Stock 0-5%, no FlushCCA--Paper Stock 0-5%, with FlushBA---Slurries 0-5%, no FlushCCAACHigh Boiling Point Liquids, no FlushCCAACTemperature ControlCCCAASelf-Venting and DrainingCBAACSeal Face Heat RemovalCAAAAMolten or Polymerized Liquid, no FlushCCCACMolten or Polymerized Liquid with FlushCCCAADynamic SealFor Elimination of Sealing Problems—Reduced Maintenance CostsOn tough pumping services, especially corrosives and slurries, mechanical seals requireoutside flush and constant, costly attention.Even then, seal failures are common, resultingin downtime.Goulds offers the ANSI PLUS TM DynamicSeal which, simply by fitting a repellerbetween the stuffing box and impeller,eliminates the need for a mechanicalseal.Benefits of Goulds Dynamic Seal: External seal water not required Elimination of pumpagecontamination and product dilution Reduces utility cost No need to treat seal water Eliminates problems associated withpiping from a remote sourceAt start-up, the repeller functions like animpeller, and pumps liquid and solids fromthe stuffing box. When pump is shut down,packing (illustrated) or other type of secondary seal prevents pumpage from leaking.Besides being available as a complete unit,any Goulds 3196 can be easily field-convertedto Dynamic Seal. Retrofit kits are readilyavailable.STUFFING BOXCOVERCHEM-1AREPELLERREPELLER PLATE26
Dimensions Model 3196All dimensions in inches and (mm). Not to be used for eSuctionSize1x11/2-611/2 x3-6AA111/2AB11/23232x3-6XABDBare PumpWeightLbs. (kg)SP84 (38)92 (42)6.5 (165)13.5 (343)4 (102)5.25 (133)3.75 (95)95 (43)1x11/2-8AA111/2100 (45)11/2 x3-8AB11/23108 (49)3x4-7A703411 (280)220 (100)2x3-8A60239.5 (242)220 (91)3x4-8A70343x4-8GA703411 (280)220 (100)19.5 (495)4 (102)8.25 (210)1x2-10A051211/2 x3-10A5011/23200 (91)2x3-10A60239.5 (242)3x4-10A703411 (280)3x4-10HA403412.5 (318)275 (125)4x6-10A80464x6-10HA804613.5 (343)305 (138)11/2 x3-13A2011/2310.5 (267)2x3-13A302311.5 (292)275 (125)3x4-13A403412.5 (318)330 (150)4x6-13A804613.5 (343)405 (184)6x8-13A906816 (406)560 15GA1208108x10-16HA1208.5 (216)220 (100)230 (104)3.75 (95)19.5 (495)4 (102)265 (120)10 (254)245 (111)670 (304)18 (457)610 (277)740 (336)19 (483)27.875 (708)6 (152)14.5 (368)5.25 (133)710 (322)8104x6-174616 (406)650 (295)850 (385)6x8-178x10-176881018 (457)19 (483)730 (331)830 (376)27CHEM-1A
Hydraulic Coverage Model 319618010060200803001004005006006004008011/2 x3-103x4-103002x3-81x11/2 -820011 /21x11/2 - 62x3-108x3-3x4-8G2x3-6200204x6-10(LTX)30050060 70 80400 m3 /h 20FT. 0 GPM100 TOTAL HEAD — 1750 RPM (60 Hz)35060 6040200300700100900100400140 1602702003004030500 600 700 8001000 1400 1800 22002600 3400 4200 50001750/1450 RPM1601408x1016010010601x2-1001x11/2 -82x30 8x10-136x8-133x4-10H11/2 x3- 83x4- 82x3-61x11/2 - 60 GPM 1000 m3 /h 20-874-4x6-10H4045302010204x6-100300 400 50060 80 100700140900 1000 1400 1800 2200180220 300500CAPACITY — 1750 RPM (60 Hz)CHEM-1A558060 3x11/2 x3- 6408x10-16H4x6-133x4-102x3-10 402010011/2 x3-10m751205G3x4-132x31311/2 -17230802001400 500 600800 1000 1200180501100200 250 Scale Change150CAPACITY — 1450 RPM(50 Hz) STXMTX/LTXXLT-X3101003x4-711/2 x3- 610040 CAPACITY — 3500 RPM (60 Hz)652003x4-13(LTX)00 GPM0 m3 /h751203001x2 -1020951602x3-13(LTX)100mm50011/2 x3-1340001100 FT.80070014060700250STXMTX/LTX500100 2001503500/2850RPM8002205028TOTAL HEAD — 2850 RPM (50 Hz)0 GPMFT.CAPACITY— 2850 RPM (50 Hz) 40 TOTAL HEAD — 3500 RPM (60 Hz)m203000 34005000 5800 6600 7400700 1000 Scale Change14000TOTAL HEAD — 1450 RPM (50 Hz)0 m3 /h
50 Hz Performance CurvesRPM 2850CENTRIFUGAL PUMP CHARACTERISTICSCDS:5005-2Model: 3196Size: 1X1.5-6Imp. Dwg. 76781Pattern 56206Eye Area: 20 cm2FOR ALLOY CONSTRUCTION605550400.9m55 5730 140mm1.2m591.5m57359 154mm3040 434750 518 m59127mm2511STX1 x 11 2-6AACDS:5007-1Model: 3196Size: 1X1.5-6Imp. Dwg. 76781Pattern 56206Eye Area: 20 cm2FOR ALLOY CONSTRUCTION121751250.6m40 455030RPM 1450CENTRIFUGAL PUMP CHARACTERISTICS1504535 154mmModel 0CAPACITY032m3 /h90 100 110 120 130 140GPM0CDS 5005-21450 RPM207024282850 RPMRPM 2850CENTRIFUGAL PUMP CHARACTERISTICS605502517515045154mmSTX11 2 x 3-6AB30140mm203010354012455096516m3 /h70GPMRPM 1450CDS 2274-4353040 45 5055 5860154mm0.6m140mm6025585557560106 127mm10014550CDS 5007-111725 127mm825121252.4m3m6665 3.7m6360620Model: 3196STXSize: 1.5X3-6Imp. Dwg. 76778 / 76792Pattern 56089 / 56207Eye Area 30 cm 283515CENTRIFUGAL PUMP CHARACTERISTICS501.2m1.3m40 50 5560 636566410CDS 2082-6Model: 3196Size: 1.5x3-6Imp. Dwg. 76778 / 76792Pattern 56089 / 56207Eye Area 30 cm 24051.75kW0.75 kW MINIMUMMOTOR SIZE225CAPACITY01031.5kW1.1kW405502050154114mm15 102mm251.5kW1.1kWCAPACITY001004020308040120160.75 kWMINIMUMMOTOR SIZE22.2kW5103503.7kW555010502006070240280m3 /h803203600RPM 2850CENTRIFUGAL PUMP CHARACTERISTICS555020101540175STX2 x 3-61501.6m46 51 5635 154301.8m12775110.6m1040160502006070240CENTRIFUGAL PUMP CHARACTERISTICS653040203mm46 5060280m3 /h80320360RPM 28501.4m1.8m54 5658 5959 3.7m58114200STX1 x 11 2-8AA.75kW105020156016040180GPMRPM 1450CDS:5011-140 4550 5355 570.6m501m1.8m573m55535045190mm178mm40301.5kW408 140mm75706030203mm10 152mm503.7kW35140Model: 3196Size: 1x1.5-8Imp. Dwg. 76793Pattern 56208Eye Area: 23 cm2FOR ALLOY CONSTRUCTION20121005.5kW301200CDS 3081-4165mm30 140mm2510022161257.5kW2080241435 152mm1040m3 /h18150165mm1.1kW646151550CENTRIFUGAL PUMP CHARACTERISTICS17554202060551450 RPM56178mm25 127mm256663CDS:5010-14540301.5m690GPMModel: 3196Size: 1x1.5-8Imp. Dwg. 767932.4mPattern 56208Eye Area: 23 cm2FOR ALLOY CONSTRUCTION55 190mm506950CDS 3082-41m351mCAPACITY2850 RPM0.6mCDS:3081-412.2kW300GPM2CAPACITY1200.8m60 63 663503.7kW255205545615651461021080m3 /hModel: 3196Size: 2x3-6Imp. Dwg. B101076Pattern 56603Eye Area: 41.9 cm21245.5kW11410RPM 145056620401806 12710071690401607 1403.7m140035140CDS 2274-49 1541252.7m66 69 7125153012082.1m61251001450 RPM45 504080CENTRIFUGAL PUMP CHARACTERISTICS50452060CDS:3082-4Model: 3196Size: 2x3-6Imp. Dwg. B101076Pattern 56603Eye Area: 41.9 cm260CAPACITY00GPMCDS 2082-62850 RPM5120.75kW4502.2kW10210CAPACITYCAPACITY050202850 RPM104015602080251003012035140160m3 /h40180000GPMCDS 5010-1410201450 RPM2983012405016607032m3 /h90 100 110 120 130 140GPM208024280CDS 5011-1CHEM-1A
50 Hz Performance CurvesRPM 2850CENTRIFUGAL PUMP 60622.7m63633.4m55 190mm50 178mmCDS:5014-11756058150165mm4012535 152mm22STX11 2 x 3-8AB10kW25 127mm6040 45 5016 203mm55 5860 6114 190mm0.9m61601.5m58405550308 140mm127mm65015500.6m178mm10 152mm755kW507018165mm1007.5kW2020125530 140mmCDS:5015-1Model: 3196Size: 1.5X3-8Imp. Dwg. 76794Pattern 56209Eye Area: 28.57 cm2ALLOY CONSTRUCTION242006245RPM 1450CENTRIFUGAL PUMP CHARACTERISTICSModel: 3196Size: 1.5X3-8Imp. Dwg. 76794Pattern 56209Eye Area: 28.6 cm2ALLOY CONSTRUCTION58Model 012050160602007024028080320360RPM 2850CENTRIFUGAL PUMP CHARACTERISTICS060556267 691752.3m2.6m35 165mm6930 152mmMTX3 x 4-7A7055401006020080300120140500600160m3 /h700GPMRPM 2900CENTRIFUGAL PUMP CHARACTERISTICS1.4m1.7m45 502m552.4m606365203mm603m65 3.5m6355 191mm5050 5560631m65225200MTX2 x 3-8A6015015kW60309 050240104020308012050200602407028080320360RPM 2900CENTRIFUGAL PUMP CHARACTERISTICSRPM 1450242220180GPM0.3m35213mm7060 3505.5mMTX3 x 25301001203514016040180m3 /hGPMRPM 1450CDS 1588-4Model: 3196Size: 3X4-8Imp. Dwg. 100-164 / 100-163Pattern 53814 / 53813Eye Area 12.55 cm2226055 60 650.9m70 737576 1.2m213mm203mm50761.5m75734010 52001003002900 RPMCHEM-1A1254001505001756003.7kW700200800225900m3 /h2065602.2kW55675652030708 152mm18.5kW702012 178mm350CDS 3085-314 m59561450 RPM81178mmCDS:3085-30.9mCENTRIFUGAL PUMP CHARACTERISTICS225GPM6045 5061CDS 1780-4Model: 3196Size: 3x4-8Imp. Dwg. 100-164 / 100-163Pattern 53814 / 53813Eye Area281 cm 2m3 /hCAPACITYCDS 3086-32900 RPM213mmm3 /h3602504016080Model: 3196Size: 2X3-8Imp. Dwg. 100-161Pattern 53811Eye Area: 35 cm2FOR ALLOY CONSTRUCTION43.7kW3200CDS 2701-38 5552055127mm12 178mm7.5kW025606601.5m6314 190mm11kW35 152mm15351.2mCENTRIFUGAL PUMP CHARACTERISTICS165mm20CDS 2701-31450 RPM178mm65RPM 1450Model: 3196Size: 3x4-7Imp. Dwg. C00143A01 / A02Pattern 57720/ 57725Eye Area581 cm 21016 203mm30 140mmGPM517545404011 183mmCDS:3086-3Model: 3196Size: 2X3-8Imp. Dwg. 100-161Pattern 53811Eye Area: 35 cm2FOR ALLOY CONSTRUCTION1.1m65m3 /h10CDS 2700-32850 RPM70 213mm32210040028325202490 100 110 120 130 1400CDS 7 140mm11kW1516508 152mm62127mm2012401450 RPM1253m67140mm2530CENTRIFUGAL PUMP CHARACTERISTICS1502m50 558200.8m50183mm410CDS 2700-3Model: 3196Size: 3x4-7Imp. Dwg. C00143A01 / A02Pattern 57720/ 57725Eye Area 81 cm2400GPMCDS 5014-12850 RPM45CAPACITY0m3 /h502000101.5kWCAPACITY20406080100120140160m3 /h700GPM0GPM0CDS 1780-41001450 RPM30200300400500600CDS 1588-4
50 Hz Performance CurvesRPM 2900CENTRIFUGAL PUMP CHARACTERISTICS651.8m2.4m4555 606468213mm703.7m7260203mm554.9m7250 190mm200175686.1m15060125644022MTX3 x 4-8GA7035 165mm25203mm20401006080200100300140500600160m3 /h700GPM0CDS 1591-32900 RPMRPM 2900CENTRIFUGAL PUMP 6020024070280m3 /h80320360RPM 14502732CDS:5019-137420.6m45 46254mm12025254mm1000.9m35301.2m401.5m47 401650608032m3 /hGPM2428RPM 2900CENTRIFUGAL PUMP CHARACTERISTICS1201101005035055591.8m2.1m61 62229mm41015620825301035401245MTX11 2 x 3-10A50m3 /h166570GPMCDS 5019-1RPM 1450CDS:5023-128262445254mm225090800.6m555860 kW10104020308012040160506020024070280320RPM 2900CENTRIFUGAL PUMP CHARACTERISTICS3601102.4m55900CDS 5026-13m3.6m60 624.6m646210208301240501660207080MTX2 x 3-10A6050 5524 254mm1m601.6m621.9m1816 203mm2.2m6220 229mm2502001210015kW50178mm301002900 403.7kW50CAPACITY207060811kW10CDS 5027-110 152mm15022kW55RPM 14502.5m6018.5kW200GPMModel: 3196MTSize: 2X3-10Imp. Dwg. 100-596 / 100-595Pattern 54020/ 54019Eye Area650cm 21.3m22300m3 /hCDS 5023-130kW50 178mm30203290 100 110 120 130 140CENTRIFUGAL PUMP CHARACTERISTICS3502814203mm152mm2455607041450 RPM6m6480 229mm301.1kW0GPMModel: 3196MTSize: 2X3-10Imp. Dwg. 100-596 / 100-595Pattern 54020/ 54019Eye Area 50 cm 2120254mm800CDS 5022-12900 RPM100m3 2 178mm1007.5kW2006001430001455Model: 3196Size: 1.5X3-10Imp. Dwg. 100-593Pattern 54017Eye Area: 42 cm2FOR ALLOY CONSTRUCTION1820050 178mm40501450 RPM25060 203mm605202.4m2.7m62615920.5kWCENTRIFUGAL PUMP CHARACTERISTICS3001.5m80201.2m4090 254mm400CDS:5022-1Model: 3196Size: 1.5X3-10Imp. Dwg. 100-593Pattern 54017Eye Area: 42 cm2FOR ALLOY CONSTRUCTION.75kW3227CAPACITY0CDS 5018-12900 RPM30152mm3790 100 110 120 130 W40 152mm20204515203mm60906048 47229mm80229mm4001.8m100804614070GPMModel: 3196Size: 1X2-10Imp. Dwg. B10009Pattern 56381Eye Area: 31.6 cm2FOR ALLOY CONSTRUCTION30250CDS 2321-41450 RPMMTX1 x 2-10A053050CENTRIFUGAL PUMP : 3196Size: 1X2-10Imp. Dwg. B10009Pattern 56381Eye Area: 31.6 cm2FOR ALLOY CONSTRUCTION220501421204000.9m450CAPACITY00.6m6368 7072588 152mm45 7.5kW5.5kW10506 m2070201210030 152mmCDS 2321-4Model: 3196Size: 3X4-8GImp. Dwg. 100-166 / 100-165Pattern 53816 / 53815Eye Area 11 cm2247045 178mmRPM 1450CENTRIFUGAL PUMP CHARACTERISTICSCDS 1591-3Model: 3196Size: 3X4-8GImp. Dwg. 100-166 / 100-165Pattern 53816 / 53815Eye Area211 cm 23mModel 3196120500140600160m3 /h700GPM0CDS 5026-1CAPACITY00100401450 RPM312080301204016050200602407028032080360m3 /h0GPMCDS 5027-1CHEM-1A
50 Hz Performance CurvesRPM 2900CENTRIFUGAL PUMP 4.3m80 229mm727125037kW2007060 203mmRPM 1450CENTRIFUGAL PUMP CHARACTERISTICS27.5MTX3 x 4-10A700.6m2550 55254mm600.9m65686922.530kW807020 229mm706530 152mm60201020040100602008050400140160m3 /h700GPMRPM 14500.9m255022.5 254mm606570801.5m7374 751.8m207517.5 229mm707473MTX3 x 4-10HA4060504010080400120140500600RPM 2965CENTRIFUGAL PUMP CHARACTERISTICS160m3 /h700GPM405060 65254mm905.8m70 4 x 7410060260mm7075 778069216mm3501600m3 /h4004060180060MTX4 X 6-10HA80774075100400120500140600160m3 /h700GPM0CDS 5382RPM 145070 74762078CDS:4029-4Model: 3196Size: 4x6-10HImp. Dwg. C02478APattern 63702Eye Area: 174.8 cm2703m DUCTILE IRON CONSTRUCTION2m6022 260mm8018 1482008016 229mm50203mm60CENTRIFUGAL PUMP CHARACTERISTICS70216mm12100401475 PMModel: 3196Size: 4X6-10HImp. Dwg. C02521APattern 63773Eye Area: 174.8 cm2ALLOY CONSTRUCTION187.5kW300003m241mm5065203mm6RPM 14508220602.2m728CDS 5380247074502965 RPM2m802m241mm501400CENTRIFUGAL PUMP CHARACTERISTICSCDS 53821.8m103001200GPM1255kW250RPM 147518 229mm14m3 /hModel: 3196Size: 4X6-10GImp. Dwg. C06088APattern 1E645Eye Area 167.5 cm21.5m2216CAPACITY2007000CDS 2991-44150160600CENTRIFUGAL PUMP CHARACTERISTICS25045kW37kW30kW100140500950 RPM1014302551504050356 203mm2006500CDS 2991-465103008.8m9.7m7510.4m747270203mm20RPM 9501.2m0350216mm30GPM70CDS 5380Model: 3196Size: 4X6-10GImp. Dwg. C06088APattern 1E645Eye Area 167.5 cm21204.5mm3 /h737CDS 2825-51450 708 229mm20CAPACITY2060240Model: 3196MTXSize: 3X4-10HI
ANSI B15.1 Coupling Guard Ductile Iron Frame Adapter Optional Shaft Guard Proven Performance Every day in over 500,000 installations, the Goulds 3196 ASME/ANSI (B73.1M) process pump proves why it’s the industry standard for performance. Users in chemical, petrochemical, pulp & p
Goulds Models 3196, CV 3196, HT 3196, LF 3196, NM 3196, 3198, and 3796. This manual . This manual must be read and understood before installation and start-up. This instruction manual covers several different pump models that all have a common power end. Most assembly, disassembly, and inspection procedures are the same for all the pumps. .
Goulds Centrifugal Pump Model 3196 Mfg: Goulds Model: 3196 Stock No. OIP016. Serial No. 788B861 Goulds Centri
HT 3196 LF PUMP CURVE Goulds HT 3196 LF Designed for High Temperature, Low Flow Services. 6 All ANSI B73.1 seal flush and cooling plans are available to control emission levels and meet seal installation requirements. Goulds can al
Maintenance Cost 32,000 Purchase Cost 8,000 Installation Cost 16,000 Operating & Energy Cost 44,000 Goulds 3196 3 In order to select a
Goulds Pumps 7v ITTIndustries 'vV Engineeredforlife Goulds Model VIISVertical Cantilever Recessed Impeller Pumps BULLETIN221.1 GOULDS PUMPS February2001 Lenntech info@lenntech.com Tel. 31-152-610-900 www.lenntech.com Fax. 31-152-616-289 info@lenntech.com Tel. 31-152-610-900 www.lenntech.com Fax. 31-152-616-289 Lenntech
Goulds Pumps is a brand of ITT Corporation. Goulds Pumps es una marca de fábrica de ITT Corporation. www.goulds.com Engineered for life Goulds Pumps G&L Series NPE 316L SS NPE Series End Suction Centrifugal Pumps Bombas Centrífugas de Succión Final Serie NPE BNPE
Goulds Pumps is a brand of ITT Residential and Commercial Water. Goulds Pumps es una marca de fábrica de ITT Agua Residencial y Comercial. www.goulds.com Engineered for life Goulds Pumps G&L Series NPE 316L SS NPE Series End Suction Centrifugal Pumps Bombas Centrífugas de
The Internet Encyclopedia Bidgoli Hossein.pdf handbook of information security, the handbook of computer networks and the encyclopedia of information systems. the encyclopedia of information systems was a recipient of one of the library journal s best reference sources for 2002. hossein bidgoli, ph.d. - home - csub hossein bidgoli, ph.d. 2001-2002, professor of the year. 2015-2016, faculty .
