2014 Insight Navigation Manual (Unlinked)

INSIGHT KA-31TM8820.book10 �１時２６分Quick Reference GuideNavigation—Home Addresses and Going HomeThe “Home” feature automatically routes you to your home address from any location simply by selecting Go Home 1 or 2, or saying d “GoHome.” You can store two home addresses as Home Address 1 and Home Address 2. (P36)Storing Your Home Addressf Enter a name and select OK.Going Homea Press the INFO button.a Press the DEST button.b Select Setup.b Select Go Home 1.g Select Edit Address.h Select Address.i Enter an address.j Select Edit Phone No.c Select Personal Information.k Enter a phone number and select OK.d Select Home Address 1.e Select Edit Name.Alternatively, you can say d “GoHome” from any screen. Your homeaddress is displayed on the CalculateRoute screen.c Select Set as Dest.l Select OK.z The following voice commands areavailable: say d “Go Home,” d “GoHome 1,” d “Go Home 2.”z If you have two home addresses stored,saying d “Go Home” will select HomeAddress 1 when DEST Menu1 isdisplayed or Home Address 2 whenDEST Menu2 is displayed.10

INSIGHT KA-31TM8820.book11 �１時２６分Enter your destination using one of several methods, then follow route guidance on the map or guidance screen to your destination. Youcan also perform these steps using d voice control.a Press the DEST button.e Select your destination street fromthe list.h Select Set as Dest.Route guidance to the destinationbegins.f Enter the street number. Select OKwhen finished.z View Routes: Choose one of threeroutes.Quick Reference GuideNavigation—Entering a Destinationb Select Address.c Select Street.d Enter the name of your destinationstreet and select List if necessary.g If there is more than one city with thespecified street, a list of cities isdisplayed. Select the desired city fromthe list.z Route Pref.: Choose MAX or MIN forthe three settings.11

INSIGHT KA-31TM8820.book12 �１時２６分Quick Reference GuideNavigation—Changing Route or DestinationYou can alter your route by adding waypoints to visit, adding streets to avoid, or changing your destination during route guidance.Adding a Waypoint(“Pit Stop”)Changing YourDestinationYou can add up to four waypoints alongyour route. (P103)There are four methods you can use tospecify a new destination during routeguidance.a Press the DEST button.b Select Waypoint.c Select search method.d Select the icon category and locationto add to the destination list whenprompted.12a Press the DEST button.b Select Cancel Route.z Say d “Find Nearest ” (P108)Searches for the nearest place/landmarkon the map screen (e.g., d “Findnearest gas station”).z Say d “Go Home” (P10)Routes to your home address.When you select Places Around theWaypoint, select the desired waypoint.Canceling Your Routez Selecting an icon on the map (P109)Scroll the map to position the cursor overa place/landmark icon or a new area onthe map. Press the ENTER button twice.z Entering a new destination (P110)Press the DEST button. Select DESTMenu1/2 and enter a new destination.From the map screen:a Select MAP MENU.b Select Cancel Route.

INSIGHT KA-31TM8820.book13 �１時２６分This navigation system comes with voice help information, which tells you how to use the voice command functions.Go to Voice Info for tips when using the voice command functions.Getting Started Tutoriald Select Using the talk button.Command HelpFor “Command Help” menu items, all voicecommands that are available for thatsystem are listed.a Press the INFO button.Quick Reference GuideVoice Helpb Select Voice Info.e Select Read to hear the tutorial readaloud.Select Read to hear the commands in thelist read aloud.c Select Getting started.Voice Commands (P187)Select Stop to stop the tutorial.You can also view the availablecommand list for each system. SeeCommand Help on this page.13

INSIGHT KA-31TM8820.book14 �１時２６分Quick Reference GuideTroubleshootingWhy does the vehicle position icon on the map “lag” ashort distance behind my actual position, especially atintersections?This is normal. The navigation system is unaware of thewidth of intersections. Large differences in vehicle positioncan indicate a temporary loss of the GPS signal.How do I specify a destination when an entered city orstreet could not be found?Try entering the street first. Some cities are lumped in witha major metro area. In rural “unverified” areas or newsubdivisions, streets may be missing or only partiallynumbered.Why does the “time to destination” display sometimesincrease even though I am getting closer to mydestination?How do I turn on the navigation system voice guidance?The “time to destination” is based on the posted roadspeed signs and your actual road speed to give you abetter estimate of arrival time.1. Press the INFO button. Select Setup. Check thatVolume is not set to Off.2. Select Other, then Basic Settings. Set VoiceRecognition Tutor to On if you want the system toprovide confirmations and system prompts.Why does my clock frequently change the time forwardand backward by one hour?The clock setting is automatically updated based on yourGPS location. If you normally drive between two timezones, the clock may keep adjusting the time. You canturn this feature off.2 Clock Adjustment P. 4714For more Information (P163)My battery was disconnected or went dead, and thenavigation system is asking for a code. Where do I find it?Your vehicle comes with a label in the Owner’s Manual kitthat includes the system’s security code and serial number.You should keep this label in a safe place outside yourvehicle. If you cannot find it, contact your dealer.

INSIGHT KA-31TM8820.book15 �３時３１分How to Use This ManualThis section explains different methods on how you can easily find information in this manual.Searching the Table of Contents(P1)ContentsTwo types of Tables of Contents helpyou find your desired information.More DetailedContentsTable of ContentsChapter ContentsFirst, find the general chapter related towhat you are looking for (e.g., enteringa destination from the Address Book).Then, go to that chapter to view a morespecific table of contents.This more detailed table of contentsshows you exactly what information islisted by section and title.The Index consists ofmain terms and subentries. The sub-entrieshelp you get to thedesired page dependingon what you are lookingfor.Searching the Index (P198)Menu items displayed on thenavigation screen (e.g., Address Book)can be found individually in the Index.Navigation ScreenIndexGo to theNext Page15

INSIGHT KA-31TM8820.book16 �３時３１分After following the menutree, step-by-stepinstructions explain how toachieve the desired result.Menu TreeDEST buttonThe menu tree helps guide youthrough the system’s menu options.To get to your desired function, followthe menu tree in order of the stepsshown.NOTE:All menu options can also beactivated with voice commands.Select the menu option.Press the hard button on thesystem control panel.Press the DEST button.* Sample pages and images in this section may differ from the actual ones.16Select Address Book.

INSIGHT KA-31TM8820.book17 �３時３１分System SetupThis section describes the start-up procedure and the navigation andsetup functions.Start-up . 18Voice Control System . 20Command Input . 20Voice Recognition . 21Interface Settings . 22Display and Volume Settings . 22Guidance Prompts. 23Basic Settings . 24Color . 25Language. 29Personal Information. 30Address Book. 31Home Addresses . 36PIN Numbers . 37User Name .38Previous Destinations .39Routing & Guidance .40Rerouting.41Unverified Area Routing .42Edit Avoid Area .44Edit Waypoint Search Area.46Clock Adjustment .47Adjust Time .48Resetting the Clock Settings.48Setting the Clock Type .49Vehicle .50Off-road Tracking .51Correct Vehicle Position .52Data Reset . 53Reset Factory Default Settings . 53Clear All Speed Dial. 5417

INSIGHT KA-31TM8820.book18 �３時３１分Start-upSystem SetupThe navigation system starts automatically when you turn the ignition toACCESSORY (I) or ON (II). At start-up, the following Confirmation screen is displayed.1. Select Change Language.X If you do not need to changethe system language, proceed tostep 3.1 Start-upIf the navigation system loses power at any time,you may need to press and hold the VOL 9(Volume/Power) button for more than twoseconds, or you may be prompted for the 5-digitsecurity code.2 System Initialization P. 176You can change the system language at anytime.2 Language P. 292. Select the system language.3. Select OK.X Your current position isdisplayed on the map screen.18“OK” on the Confirmation screen cannot beselected by using a voice command. If you do notselect OK within 30 seconds, the screen turnsdark and you cannot use voice commands. Pressany navigation or voice control button tocontinue.2 Clock Adjustment P. 472 Setting the Clock Type P. 49

INSIGHT KA-31TM8820.book19 �３時３１分XXStart-upX Limitations for Manual OperationSystem SetupCertain manual functions are disabledor inoperable while the vehicle is inmotion. You cannot select a grayedout option until the vehicle is stopped.Voice commands are still operablewhile the vehicle is in motion.Disabled Option19

INSIGHT KA-31TM8820.book20 �３時３１分Voice Control SystemSystem SetupYour vehicle has a voice control system that allows hands-free operation of most ofthe navigation system functions. You can also control the audio and climate controlsystem, and make and receive phone calls using Bluetooth HandsFreeLink .The voice control system uses the d (Talk) and K (Back) buttons on the steeringwheel and a microphone near the map lights on the ceiling.A “Voice Info” feature provides a tutorial that explains how to use the voice controlsystem.2 Voice Help P. 131 d (Talk) ButtonCommand Input1 Command InputIf the system does not understand a command or you wait too long to give acommand, it responds with “Pardon? No command was heard. Please press the talkbutton and say a command.”When you give a command, the system generally either repeats the command as aconfirmation or asks you for further information. If you do not wish to hear thisfeedback, you can turn it off. However, listening to the feedback will help familiarizeyou with the way the system expects commands to be phrased.2 Basic Settings P. 24If the system cannot perform a command or the command is not appropriate for thescreen you are on, the system beeps.If the system responds with prompts such as “Please use the touch screen to ” or“Please use the joystick to ,” the system is asking for input that cannot beperformed using the voice control system.On character input screens, a list of possible characters is displayed if the systemdoes not recognize your command.You can find out which voice commands are available for a particular screen usingthe d Help command. The system will display and read the list of availablecommands to you.20When you press the d (Talk) button, a helpfulprompt asks what you would like to do. Pressand release the d (Talk) button again to bypassthis prompt and give a command.The audio system is muted while using the voicecontrol system.

INSIGHT KA-31TM8820.book21 �３時３１分XXVoice Control SystemXVoice RecognitionVoice Recognition Make sure the correct screen is displayed for the voice command that you areusing.2 Voice Commands P. 188 Close the windows and moonroof.System SetupTo achieve optimum voice recognition when using either the navigation voicecontrol system or Bluetooth HandsFreeLink : Adjust the dashboard and side vents so air does not blow onto the microphone onthe ceiling. Speak clearly in a clear, natural speaking voice without pausing between words. Reduce any background noise if possible. The system may misinterpret yourcommand if more than one person is speaking at the same time. Refer to the Voice Info tutorial.2 Voice Help P. 1321

INSIGHT KA-31TM8820.book22 �３時３１分Interface SettingsDisplay and Volume SettingsH INFO button X Setup1 Display and Volume SettingsSystem SetupUse the Main Setup screen to adjust the display and volume.Select b or n to adjust the desireditem.You can set the display and volume settingsusing voice commands.2 Main Setup Screen Commands P. 193The following items are available: Brightness: Adjusts the screen’s brightness. Contrast: Adjusts the screen’s contrast. Black Level: Adjusts the screen’s black level. Volume: Adjusts the navigation system volume level.22You can set separate daytime and nighttimesettings for Brightness, Contrast, and BlackLevel. Adjust each setting when the display is ineither daytime or nighttime mode.VolumeIf you set Volume to Off, you will not hear routeguidance or voice command confirmations. Ifyou then select Voice on the map menu, you willhear route guidance at the default volume.

INSIGHT KA-31TM8820.book23 �３時３１分XXInterface SettingsXGuidance PromptsGuidance PromptsH INFO button X Setup1 Guidance PromptsSelect an option.To replay voice guidance, select Voice on themap menu.2 Listening to Voice Guidance P. 84You can turn voice guidance off if you prefer.2 Display and Volume Settings P. 22System SetupSet the number of guidance prompts before you get to the guidance point.The following options are available:ItemsDistance from Guidance PointAbout 1/2 mileMINAbout 1/4 mileJust beforeYesNORMAL(factory default)YesYesYesMAXYes*Yes*Yes* Provides extra voice guidance information (e.g., “Take the second exit towardLos Angeles”).23

INSIGHT KA-31TM8820.book24 �３時３１分XXInterface SettingsXBasic SettingsBasic SettingsH INFO button X Setup X Other X Basic SettingsSystem SetupSet the map units to either miles or kilometers, and control the voice feedback fromthe navigation system.Select an item.The following items are available: Keyboard Layout: Sets the type of keyboard screen to either Alphabet (factorydefault) or QWERTY. Units: Sets the map units to either miles (factory default) or kilometers. Voice Recognition Tutor: Turns the voice feedback feature on or off.On (factory default): Provides voice control system confirmation or prompts.Off: Disables the feature. Display Voice Command Tips: Alerts you when manual control of the system isdisabled to prevent distraction while driving. Only voice commands are available.On (factory default): Displays a message.Off: Disables the message, but some options may be grayed out on the screen.24

INSIGHT KA-31TM8820.book25 �３時３１分XXInterface SettingsXColorColorSystem Setup Verbal Reminder: Turns the verbal reminders on or off.On (factory default): Provides warning voice messages when:– Driving with the parking brake on– Driving without wearing the driver and/or passenger seat beltOff: Disables the feature.H INFO button X Setup X Other X ColorChoose the color of the navigation map and system menus.Select an item.The following items are available: Map: Sets the color of the map screen.2 Map Color P. 26 Menu: Sets the color of the menu screens.2 Menu Color P. 2625

INSIGHT KA-31TM8820.book26 �３時３１分XXInterface SettingsXColor Map Color1 Map ColorSystem SetupH INFO button X Setup X Other X Color X MapSet separate map colors for Day and Night modes.Select a color for the map screen. Menu ColorFor Night modeSet to Black (factory default) to obtain the bestnighttime display contrast.1 Menu ColorH INFO button X Setup X Other X Color X MenuSet separate menu colors for Day and Night modes.Select a color for the menu screens.26For Day modeSet to White (factory default is Beige) to obtainthe best daytime display contrast.For Day modeSet to Black (factory default is Blue) to obtainthe best daytime display contrast.For Night modeSet to Black (factory default is Blue) to obtainthe best nighttime display contrast.

INSIGHT KA-31TM8820.book27 �３時３１分XXInterface SettingsXColor Switching Display Mode Manually1 Switching Display Mode Manually1. Press the a button.X The Brightness bar is displayedfor a few seconds.2. Press the a button again.A visual guide helps you see the differencebetween Day and Night modes.2 Day or Night Mode P. 8Recommended Settings Select mid-range for the dash illumination.System SetupSet the screen brightness separately for Day and Night modes. Press the a(Display mode) button to cycle through the display modes (Day to Night to Off). Select White for the map Day display andBlack for the map Night display.X Repeat the procedure to switchthe display modes.X Select b or n to adjust thebrightness.Continued27

INSIGHT KA-31TM8820.book28 �３時３１分XXInterface SettingsXColorSystem SetupIlluminationcontrolOperationa button1Selects Day, Night, or Off display mode. This button hasthe highest priority and overrides all other display controladjustments listed below.Sunlight sensor(see yourOwner’s Manualfor location)2If the sunlight sensor detects daylight and the headlightsare turned on, the system automatically overrides theNight display and displays the Day display mode.Remember: If desired, use the a button to overridethis automatic choice.Dash illuminationadjustmentbuttons (see yourOwner’s Manualfor location)3When the headlights are turned on, and you wish to havethe Day display mode, adjust the illumination to fullbrightness (beeps).Remember: Adjust the dash brightness back to mid-rangeto allow auto switching by sensing the headlights are on oroff.Headlights(Auto/On/Off)4When turned on, the display changes to Night displaymode. The previous three controls listed above can“cancel” this function.Remember: Use the a button, or adjust the dashillumination to full brightness, to set the display to yourdesired choice.Screen colorchoice28PriorityN/AThe user can select the color of the screen that will bedisplayed for t

You can enter information (e.g., city names, street names, personal names, and business names comprising letters, numbers, and symbols) when prompted on input screens by two different methods. Using Voice Control When you see d in this manual, voice commands are available for that featu