Schneider Electric Pendant Stations Type BW, XACA, And SKYP

Pendant StationsType XACA SpecificationsTable 14:XACA2013Pistol Grip StationsSpeeds1 N.O. contact per operator2 mechanically interlocked operators1XACA201 [1]2 N.O. (staggered) contacts per operator2 mechanically interlocked operators2XACA207 [1]1 N.O. 1 N.C.2 mechanically interlocked operators1XACA205 [1]1 N.O. contact per direction1 mechanically interlocked 2 way toggle1XACD21A01011 N.O. & 1 N.C. contact per direction1 mechanically interlocked 2 way toggle1XACD21A01051General Purpose Pendants [1, 2]EnclosuresCatalog Number2-hole enclosureXACA02H73-hole enclosure (top hole is for E-stop only)XACA03H7 [3]4-hole enclosureXACA04H76-hole enclosureXACA06H78-hole enclosureXACA08H712-hole enclosureXACA12H71Standard enclosures include internal mounting plate, cable sleeve for 8 to 26 mm, internal cable clamp, suspension ring and cable tie.2Due to space limitations, two ZB2BE101 or ZB2BE102 contact blocks will fit behind each operator, but only one of any othercontact block. Potentiometers will not fit in the enclosures.3Cannot use base-mounted items or mounting adapter.Contact Blocks for Operators in Cover [1]Table 16:XACA03(Shown withoptional operator)DescriptionWiring DiagramCatalog Number1 N.O. / spring return / 1 speed—ZB2BE1011 N.C. / spring return / 1 speed—ZB2BE1021 N.O. early close, and 1 N.C. and 1 N.O. / spring return / 2 speedAXENG11911 N.C. and 2 N.O. / spring return / 1 speedBXENG14911 N.O. and 1 N.O. latching / 1 speed / interlockedCXENG37811 N.O. and 1 N.C. latching / 1 speed / interlockedDXENG3791N.C. N.C. N.C. with positive opening operationEXENT11921For mounting in enclosures: XACA03 (frontal cut-out); XACA05, A06, A08 (frontal or base cut-out).Contact Blocks For Operators in Base of Enclosure [1]Table 17:ZB2BE10 XENG37 1DescriptionCatalog Number1 N.O. / 1 speedXACS1011 N.C. / 1 speedXACS1022 N.O. / 1 speedXACS1032 N.C. / 1 speedXACS1041 N.O. and 1 N.C. / 1 speedXACS1051Cannot be used with XACA03 pendant.A1321XENG1191Catalog NumberThese XAC units are available with factory installed E-stops. Add a 3 to the end of the catalog number for the standard E-stop oradd a 4 for a trigger action E-stop. E-stops include one N.C. contact block.Table 15:XACA06Function1 Speed / 2 SpeedDescriptionB14221321C3433E142213 14 13 1433D3413 1411 12121122213231XACS10 807/2013 2013 Schneider ElectricAll Rights ReservedCourtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com

Pendant StationsType XACA SpecificationsTable 18:Operators [1]DescriptionBooted Push ButtonBooted push buttonDescriptionMushroom HeadMushroom head, momentaryMushroom head, push to maintain / turn to releaseMushroom head, push to maintain / turn to release (trigger action) [2]Mushroom head, push to maintain / key turn to releaseSelector SwitchSelector Switch(Key Operated)Mushroom head, push to maintain / key turn to release (trigger action) [2]ColorCatalog oomColorSizeCatalog Number30 mmRedZA2BC4430 mmRedZA2BS4440 mmRedZA2BS5430 mmRedZA2BS83440 mmRedZA2BS84430 mmRedZA2BS7440 mmRedZA2BS1440 mmRedZA2BS844DescriptionColorCatalog NumberSelector switch / 2 position—maintained [3]BlackZA2BD2Selector switch / 3 position—maintained [3]BlackZA2BD3Selector switch / 2 position—maintained key operated—key removal from left or right position [3]NAZA2BG4Selector switch / 3 position—maintained key operated—key removal from left or right position [3] NAZA2BG5Wobble stick (bottom mounting recommended)BlackZA2BB2RedZA2BB41Booted push buttons are for cover mounting only. All other operators can be mounted on cover or bottom.2Trigger action mushroom heads are tamper-proof, meaning that teasing or floating the operator does not change the contact state.3Not for use with XENG or XENT contact blocks.Wobble stickTable 19:XACB961Pilot Light ComponentsDescriptionColorCatalog NumberDirect supply base without lamp (for 6–120 V applications) (AC/DC)—ZB2BV006Resistor supply base with 130 V lamp (for 220–240 V applications) mberZA2BV053XACA971Pilot light operators for incandescent lampsPilot light operators for LED lampsXACA982Table 20:XACA983Enclosure AccessoriesDescriptionCatalog NumberBlank hole plugZB2SZ3Mechanical interlock (momentary). For use with XAC booted operators only.XACA009Screw adapter for self-supporting cableXACB961Low suspension ring for single row stationXACA971Protective guard for bottom mounted mushroom headXACA982Protective guard for bottom mounted selector switch or key switchXACA983Cable sleeve (XACA20 )—pistol grip styleXACA913Cable sleeve (XACA )XACA9609 2013 Schneider ElectricAll Rights Reserved07/2013 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com

Pendant StationsType XACA SpecificationsFigure 3:Exploded ViewXACA960XACB961XENT1192XACA941 ZA2BC4XENG1 91ZA2BC44XENG37 1XACA009ZA2BS54ZB2BE ZA2BS44ZA2BS14ZB2BY XACS ZB2BV00 ZA2BS74ZB2BY ZA2BD ZA2BG XACA982XACA971ZA2BD ZA2BB ZA2BV0 XACA983ZA2BG ZB2SZ3ZA2BC BS 1007/2013 2013 Schneider ElectricAll Rights ReservedCourtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com

Pendant StationsType XACA SpecificationsTable 21:LampsTypeDL1CE0 (Incandescent)Replacement BulbsType BA9sIncandescentTypeDL1CJUS (LED)LED, BA9s Base forDirect Supply BlocksTable 22:TextVoltage (AC/DC)WattsCatalog L1CE0481302.6DL1CE130ColorVoltageCatalog NumberGreen6 Vac/VdcDL1CJUS0063Red6 Vac/VdcDL1CJUS0064Amber6 Vac/VdcDL1CJUS0065Green12 Vac/VdcDL1CJUS0123Red12 Vac/VdcDL1CJUS0124Amber12 Vac/VdcDL1CJUS0125Green24 Vac/VdcDL1CJUS0243Red24 Vac/VdcDL1CJUS0244Amber24 Vac/VdcDL1CJUS0245Green120 Vac/VdcDL1CJUS1203Red120 Vac/VdcDL1CJUS1204Amber120 Vac/VdcDL1CJUS1205PVC Standard Legend Plates 30 x 40 mm[1]Bridge ForwardCatalog NumberText [1]Catalog NumberZB2BY2343OffZB2BY2312Bridge ReverseZB2BY2344OnZB2BY2311CloseZB2BY2314Off OnZB2BY2367DownZB2BY2308OpenZB2BY2313Emergency StopZB2BY2330Open rwardZB2BY2305OutZB2BY2339For RevZB2BY23Power OnZB2BY2326For-O-RevZB2BY2384RaiseZB2BY2335Hand Off BY2306High LowZB2BY2369RightZB2BY2309Hoist DownZB2BY2342RunZB2BY2334Hoist nchZB2BY2321StopZB2BY2304Jog ForZB2BY2381Stop StartZB2BY2366Jog RevZB2BY2380Trolley RightZB2BY2345Jog RunZB2BY2365Trolley p DownZB2BY2370LowerZB2BY2337Up-O-DownZB2BY2389Man AutoZB2BY23721All nameplates are black with white lettering except “Stop”, “Emergency Stop”, and “Reset,” which are red with white lettering.For black “Reset,” change the final digit of the catalog number to 2.Table 23:PVC Blank or Custom Engraved Legend Plates, 30 x 40 mmTypePVC Blank LegendPVC Custom Engraved1[1]DescriptionCatalog NumberBlack or red backgroundZB2BY2101Yellow or white backgroundZB2BY4101Black background, white lettersZB2BY2002Red background, white lettersZB2BY2004White background, black lettersZB2BY4001Yellow background, black lettersZB2BY4005Please specify lettering when ordering. Maximum of two lines with 11 characters on each line (including spaces).11 2013 Schneider ElectricAll Rights Reserved07/2013 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com

Pendant StationsType XACA WorksheetType XACA WorksheetUse this worksheet to assist in component selection. Custom orders for XACA pendant stations mustbe placed through the Product Selector in Quote to Cash. There is a 10% charge for assembly.XACA Order Guide Instructions14Custom built pendant stations1. Determine the number of operators needed, then choose an enclosure with a corresponding number of holes.2. Select the type of operator, contact block, and appropriate nameplate for each function required. Refer to pages 8–11.3. Check for special functions that may be required. These items could include mechanical interlocks, adapters for self-supportingcable, lower support rings, protective guards, etc.Catalog numberof enclosure123456789101112Mechanical interlock(draw a vertical linebetween the 2 units tobe interlocked [1])Functions(optional)XACALegendsContact blocks andpilot light bodiesPush buttonPilot light orBlanking plug12345136157816910171112Mechanical Interlock(XACA009)1112234341Mechanical interlock XACA009Number of XACA009 requiredUnit mounted in base of station (facing downwards)13234AttachmentsPositionTypeCatalog No.14Adapters for self-supporting cable type BBAP (available only with cable sleeve Ø8–26 mm)XACB96155515Lower support ringXACA97166616Protective guard for base mounted selector switch or 40 mm emergency-stop push buttonXACA982ImpossibleCombinations17Protective guard for key switchXACA983PossibleCombinations1207/2013 2013 Schneider ElectricAll Rights ReservedCourtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com

Pendant StationsType XACA DimensionsType XACA DimensionsSmall Hoist TypeXACA201, A205, and A207General Purpose TypeXACA Internal dia.8 to 10 mmInternal dia.9 to 13 mm11 to 14 mm15 to 17 mm18 to 22 mm8.521610.8727622 to 26 mm1.948A1.66421.8301.9750B2.3660Small HoistXACDInternal dia.7 to 9 mm10 to 1213 to 1516 to 188 mm dia.2.757011.83300.53.55903.15801.3339.45240XAC A982.3581.1283.1580XAC A9832.25573.23.79203.5891XAC A971823.971013.1580Number of B7.501907.501909.8525012.2031014.5737019.3049013 2013 Schneider ElectricAll Rights Reserved07/2013 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com

Pendant StationsType SKYP General InformationType SKYP General InformationLifetimeEnclosureWarrantyThis line of pendant stations consists of polymeric enclosures (2–10 units),push button units (1–5 speed), and laminated legend plates. All enclosureshave an extra single-unit space near the top that permits the installation of atoggle switch, a Type SK operator or pilot light, or a warning label (seeTable 29 on page 15). All enclosures come standard with a stainless-steelhanger bracket and internal strain-relief post. The enclosures are yellowwith a threaded opening in the top. The complete line is UL Listed and CSAcertified, with NEMA Type environmental ratings 1, 2, 3, 3R, 4, 4X, and 12(NEMA 4 only with legend plates installed). To ensure Type 4X and 13integrity, use only Type 4X and 13 operators or closing plates.There is a 10% charge for assembly. To place a custom pendant order,use the worksheet on 18 as a guide. Orders must be placed through theProduct Selector in Quote to Cash.Type SKYP SpecificationsTable 24:Type SKYP SpecificationsElectricalRatingsTypes SKRU2–SKRU5: AC NEMA / UL B300; DC NEMA / UL P600Types SKRU1, 10, 11: AC NEMA / UL A600: DC NEMA / UL P600Enclosure TypeUL Type 1, 2, 3, 3R, 4, 4X, 12, and 13OperatingTemperature-30 C to 60 C (-13 F to 140 F)StorageTemperature-40 C to 70 C (-40 F to 158 F)Housing MaterialPolycarbonateCable Entry1/2” NPTApprovals Table 25:File E78403CCN NKCRFile LR 25490Class 3211 03Electrical Contact Ratings (Types SKRU2 through SKRU5)AC—NEMA / UL Type B300Inductive, 35% Power FactorVolts [1]MakeA1BreakVAAVAResistive, 75% Power Factor1203036003360552401536001.536055OSHA Regulation, Section 1910.170 Overhead and Gantry Cranes, limits the voltage at pendant push buttons to 150 Vac or 300 Vdc.Table 26:Electrical Contact Ratings (Types SKRU1, 10, and 11)AC—NEMA / UL Type A600Volts [1]DC—Standard Duty, NEMA / UL Type P600Resistive,75% Power FactorInductive, 35% Power Factor1Make, Break, andContinuous Carrying AmperesContinuous Carrying AmperesInductive and ResistiveVoltsMake andBreak ousCarrying AmperesMake, Break, and ContinuousCarrying A Regulation, Section 1910.170 Overhead and Gantry Cranes, limits the voltage at pendant push buttons to 150 Vac or 300 Vdc.1407/2013 2013 Schneider ElectricAll Rights ReservedCourtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com

Pendant StationsType SKYP SpecificationsTable 27:Hanger bracket(Catalog no. 65091-061-01)Threaded conduit holeSpace for toggle switch, aType SK operator, or a pilot light.Use appropriate legend plates.Type SKYP enclosureEnclosuresButtonSizeConduit EntranceSizeEnclosure Only [1, 2]2¾"-14 NPTSKYP24¾"-14 NPTSKYP461"-11½ NPTSKYP681¼"-11½ NPTSKYP8101¼"-11½ NPTSKYP10Type SKRU1 through SKRU11operators. Any Type SK pilot light oroperator can be mounted in thisenclosure. The enclosure depthaccommodates one Type KA1 throughKA6 contact blocks (total of two).Class 9001 SK push-to-test pilot lights, remote-test pilot lights, and potentiometers do not fit inthese enclosures.2 Assembled pendant stations consist of an enclosure, operators, and legend plates. The price ofthe total station consists of the prices of the individual components, plus a 10% charge forassembly. To place a custom pendant order, use the worksheet on 18 as a guide. Orders mustbe placed through the Product Selector in Quote to Cash.Type SKN2 legend plateTable 28:1Push Button Units (2 Buttons per Unit)DescriptionFigure 4:Multispeed Contact Symbols(X Contact Closed)TerminalsCSPEED POSITIONOFF2 11 212287TerminalsCC1122337SKRU1Single Speed—Momentary, 490SKRU5Two Speed—Momentary, InterlockedThree Speed—Momentary, InterlockedFour Speed—Momentary, InterlockedFive Speed—Momentary, Interlocked2868-D30SPEED POSITIONOFF3 2 11 2 3Contact Symbol (Figure 4) Class 9001 Type [1]Single Speed—Momentary, InterlockedSingle Speed—Maintained, InterlockTerminalsC1TerminalsClass 9001 Type1Types SKRU 1, 10, and 11 include Type KA contact blocks.Types SKRU 2–5 are factory enclosed contact blocks.Boot for SKRU 2–5 9001KU37; boot for SKRU 1, 10, 11 9001KU1Table 29:Legend Plates2868-D2988TerminalsCSPEED POSITIONOFF4 3 2 11 2 3 4Where UsedMarkingClass 9001 TypeFor SKRU1 throughSKRU11Blank-BlankHoist: Up-DownTrolley: East-WestTrolley: Fwd.-Rev.Trolley: North-SouthBridge: Fwd.-Rev.Bridge: East-WestBridge: North-SouthStart-StopReset-StopAux Hoist: Up-DownPower: On-OffSpecify MarkingSKN200 8SKN209SKN210SKN211SKN299 [1]With Toggle Switch [2] inTop Space of EnclosureBlankOff-OnOn-OffSpecify MarkingSKN500 [3]SKN544 [3]SKN545 [3]SKN599 [3]With Type SK Operator orPilot Light [4] inTop Space of EnclosureBlankOnOffEmerg. StopRunPower OnOff-OnSpecify MarkingSKN100 [5]SKN103SKN104SKN105SKN124SKN138SKN144SKN199 [5]TerminalsC112233442868-D3189TerminalsCSPEED POSITIONOFF1 2 3 4 55 4 3 2 1TerminalsC11223344552868-D3290Single SpeedContact SymbolsClosing PlateType SK521Maximum of 19 characters on each side.Available as Class 9001 Type SKSTS1—includes boot for NEMA Type 4X.3 Includes legend plate, gasket, and ground plate to be used with toggle switch.4 See Class 9001 Type SK on page 18.5 Tri-laminated legend plate with a yellow or red background on a black core.2751015 2013 Schneider ElectricAll Rights Reserved07/2013 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com

Pendant StationsType SKYP SpecificationsTable 30:Non-Illuminated and Illuminated Push ButtonsNon-IlluminatedIlluminatedDescription Color1Color Code Class 9001 TypeDescription ColorColor Code VoltageClass 9001 Type2 PositionRedRSKR9R2 PositionRedR120 Vac/VdcSKR9P58RFull VoltageMaintainedPullRed [1]RSKR9R05MaintainedPullRed [1]R24 Vac/VdcFull ��SCA24 Vac/VdcFull VoltageSKR9P55SKR9Red knob available with “Push Emergency Stop” printed on the red knob. See Table 36 footnote for additional options.Table 31:Pilot Lights—UL Types 4, 4X, 13 / NEMA 4, 4X, and 13Class 9001 TypeDescription9001SKP1VoltageStyleColor CapRed FresnelGreen FresnelOtherNone110–120 V, 50–60 HzTransformerSKP1R31SKP1G31SKP1 [1]SKP1Standard220–240 V, 50–60 HzPilot Light24–28 Vac/Vdc(Fresnel colorcap shown)See Table 32 for othervoltages.TransformerSKP7R31SKP7G31SKP7 [1]SKP7Full VoltageSKP35R31SKP35G31SKP35 [1]SKP35Transformer or LED [2]SKP R31 [3]SKP G31 [3]SKP [1, 3]SKP [3]Full Voltage or Resistor SKP R31 [3]SKP G31 [3]SKP [1, 3]SKP [3]1Add the color code from Table 33. Example: SKP1 with an amber color Fresnel cap SKP1A31.2 The cap must be the same color as the LED light module. For example, use a green color cap for a green LED.3 See Table 32 for voltage assembly code.Table 32:Standard Light Modules for Pilot LightsLight ModuleVoltageDescriptionAllFull Voltage (withoutBayonet Base Lamp)6 Vac/VdcFull VoltageKM316 Vac/VdcLED RedKM31LRClass 9001TypeKM40Replacement LampVoltageAssemblyCodeRating40—310.9 VA255010102031LR—6508805201Catalog No.None6 Vac/VdcLED GreenKM31LG31LG—65088052036 Vac/VdcLED YellowKM31LY31LY—650880520212–14 Vac/VdcFull VoltageKM32321.2 VA255010103712–14 Vac/VdcLED RedKM32LR32LR—650880520112–14 Vac/VdcLED GreenKM32LG32LG—650880520312–14 Vac/VdcLED YellowKM32LY32LY—650880520224–28 Vac/VdcFull VoltageKM35351.2 VA255010100224–28 Vac/VdcLED RedKM35LR35LR0.28 VA650880521024–28 Vac/VdcLED GreenKM35LG35LG0.28 VA650880521224–28 Vac/VdcLED YellowKM35LY35LY0.28 VA650880521124–28 Vac/VdcLED WhiteKM35LW35LW0.28 VA650880521424–28 Vac/VdcLED BlueKM35LL35LL0.28 VA6508805213110–120 V, 50–60 HzLED RedKM1LR1LR—6508805201110–120 V, 50–60 HzLED GreenKM1LG1LG—6508805203110–120 V, 50–60 HzLED YellowKM1LY1LY—6508805202110–120 V, 50–60 HzTransformerKM112.4 VA2550101020110–120 V, 50–60 HzFlashingKMF1F10.85 VA2550101036120 Vac/VdcResistorKM38383.0 VA2550101027120 Vac/VdcFull VoltageKM38383.0 VA2550101027120 Vac/VdcLED RedKM38LR38LR1.4 VA6508805210120 Vac/VdcLED GreenKM38LG38LG1.4 VA6508805212Continued on next page1607/2013 2013 Schneider ElectricAll Rights ReservedCourtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com

Pendant StationsType SKYP SpecificationsTable 32:Standard Light Modules for Pilot Lights (continued)Light ModuleVoltageDescriptionAllFull Voltage (withoutBayonet Base Lamp)Class 9001TypeReplacement LampVoltageAssemblyCodeRating40—KM40Catalog No.None120 Vac/VdcLED YellowKM38LY38LY1.4 VA120 Vac/VdcLED WhiteKM38LW38LW1.4 VA6508805214120 Vac/VdcLED BlueKM38LL38LL1.4 VA6508805213220–240 V, 50–60 HzTransformer72.0 VA2550101020220–240 V, 50–60 HzLED RedKM7LR7LR—6508805201220–240 V, 50–60 HzLED GreenKM7LG7LG—6508805203220–240 V, 50–60 HzLED YellowKM7LY7LY—6508805202Table 33:KM76508805211Color Cap CodesPlastic FresnelTable 34:Plastic ymbol [1]DescriptionColorAmberContact Blocks1Class 9001 TypeClearColorCoverKA1RedColorCoverKA3Both N.C. contacts are direct opening.Shallow Depth Light Modules For Type SK Control UnitsTable 35:24–28Vac/Vdc110–120Vac/Vdc1 With LED light modules, use either a clear color cap or a cap with the same

The Class 9001 BW90 and BW100 pendant stations are used for hoist applications requiring either single-speed or two-speed buttons. These thermoplastic enclosures have a 1/2-inch conduit entrance at the top to accept a pendant cable. Internal and external strain relief comes standa